Probe #a1e4087a33 of ASUSTek PRIME Z790-P WIFI Desktop Computer
Log: xorg.log.1
[ 7.888] (--) Log file renamed from "/var/log/Xorg.pid-920.log" to "/var/log/Xorg.0.log"
[ 7.891]
X.Org X Server 1.21.1.15
X Protocol Version 11, Revision 0
[ 7.891] Current Operating System: Linux XXX 6.12.10-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Sat, 18 Jan 2025 02:26:52 +0000 x86_64
[ 7.891] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=/dev/mapper/XXXXXXXXXXXXXXXXXX rw loglevel=3 quiet cfg80211.ieee80211_regdom=PT
[ 7.892]
[ 7.892] Current version of pixman: 0.44.2
[ 7.892] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 7.892] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 7.892] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 31 22:31:33 2025
[ 7.894] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 7.896] (==) No Layout section. Using the first Screen section.
[ 7.896] (==) No screen section available. Using defaults.
[ 7.896] (**) |-->Screen "Default Screen Section" (0)
[ 7.896] (**) | |-->Monitor "<default monitor>"
[ 7.896] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 7.896] (**) Allowing byte-swapped clients
[ 7.896] (==) Automatically adding devices
[ 7.896] (==) Automatically enabling devices
[ 7.896] (==) Automatically adding GPU devices
[ 7.896] (==) Automatically binding GPU devices
[ 7.896] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 7.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 7.898] Entry deleted from font path.
[ 7.898] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 7.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 7.898] Entry deleted from font path.
[ 7.898] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 7.898] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 7.898] Entry deleted from font path.
[ 7.898] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 7.898] Entry deleted from font path.
[ 7.898] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 7.898] Entry deleted from font path.
[ 7.898] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 7.898] Entry deleted from font path.
[ 7.898] (==) FontPath set to:
[ 7.898] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 7.898] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 7.898] (II) Module ABI versions:
[ 7.898] X.Org ANSI C Emulation: 0.4
[ 7.898] X.Org Video Driver: 25.2
[ 7.898] X.Org XInput driver : 24.4
[ 7.898] X.Org Server Extension : 10.0
[ 7.899] (++) using VT number 2
[ 7.899] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 7.900] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 7.900] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.0/drm/card1
[ 7.914] (--) PCI:*(3@0:0:0) 1002:744c:1462:5200 rev 200, Mem @ 0x4000000000/34359738368, 0x4800000000/268435456, 0x83400000/1048576, I/O @ 0x00006000/256, BIOS @ 0x????????/131072
[ 7.914] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 7.914] (II) LoadModule: "glx"
[ 7.915] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 7.923] (II) Module glx: vendor="X.Org Foundation"
[ 7.923] compiled for 1.21.1.15, module version = 1.0.0
[ 7.923] ABI class: X.Org Server Extension, version 10.0
[ 7.923] (II) Applying OutputClass "AMDgpu" to /dev/dri/card1
[ 7.923] loading driver: amdgpu
[ 7.923] (==) Matched amdgpu as autoconfigured driver 0
[ 7.923] (==) Matched ati as autoconfigured driver 1
[ 7.923] (==) Matched modesetting as autoconfigured driver 2
[ 7.923] (==) Matched fbdev as autoconfigured driver 3
[ 7.923] (==) Matched vesa as autoconfigured driver 4
[ 7.923] (==) Assigned the driver to the xf86ConfigLayout
[ 7.923] (II) LoadModule: "amdgpu"
[ 7.923] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 7.925] (II) Module amdgpu: vendor="X.Org Foundation"
[ 7.925] compiled for 1.21.1.11, module version = 23.0.0
[ 7.925] Module class: X.Org Video Driver
[ 7.925] ABI class: X.Org Video Driver, version 25.2
[ 7.925] (II) LoadModule: "ati"
[ 7.925] (WW) Warning, couldn't open module ati
[ 7.925] (EE) Failed to load module "ati" (module does not exist, 0)
[ 7.925] (II) LoadModule: "modesetting"
[ 7.925] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 7.925] (II) Module modesetting: vendor="X.Org Foundation"
[ 7.925] compiled for 1.21.1.15, module version = 1.21.1
[ 7.925] Module class: X.Org Video Driver
[ 7.925] ABI class: X.Org Video Driver, version 25.2
[ 7.925] (II) LoadModule: "fbdev"
[ 7.926] (WW) Warning, couldn't open module fbdev
[ 7.926] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 7.926] (II) LoadModule: "vesa"
[ 7.926] (WW) Warning, couldn't open module vesa
[ 7.926] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 7.926] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 7.926] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 7.946] (WW) Falling back to old probe method for modesetting
[ 7.946] (EE) open /dev/dri/card0: No such file or directory
[ 7.946] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 7.946] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[ 7.946] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 7.946] (==) AMDGPU(0): Default visual is TrueColor
[ 7.946] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card1
[ 7.946] (==) AMDGPU(0): RGB weight 888
[ 7.946] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[ 7.946] (--) AMDGPU(0): Chipset: "AMD Radeon RX 7900 XTX" (ChipID = 0x744c)
[ 7.946] (II) Loading sub module "fb"
[ 7.946] (II) LoadModule: "fb"
[ 7.946] (II) Module "fb" already built-in
[ 7.946] (II) Loading sub module "dri2"
[ 7.946] (II) LoadModule: "dri2"
[ 7.946] (II) Module "dri2" already built-in
[ 8.117] (II) Loading sub module "glamoregl"
[ 8.117] (II) LoadModule: "glamoregl"
[ 8.117] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 8.126] (II) Module glamoregl: vendor="X.Org Foundation"
[ 8.126] compiled for 1.21.1.15, module version = 1.0.1
[ 8.126] ABI class: X.Org ANSI C Emulation, version 0.4
[ 8.143] (II) AMDGPU(0): glamor X acceleration enabled on AMD Radeon RX 7900 XTX (radeonsi, navi31, LLVM 19.1.7, DRM 3.59, 6.12.10-zen1-1-zen)
[ 8.143] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[ 8.143] (==) AMDGPU(0): TearFree property default: auto
[ 8.143] (==) AMDGPU(0): VariableRefresh: disabled
[ 8.143] (==) AMDGPU(0): AsyncFlipSecondaries: disabled
[ 8.143] (II) AMDGPU(0): KMS Pageflipping: enabled
[ 8.148] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[ 8.148] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[ 8.148] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[ 8.148] (II) AMDGPU(0): Output HDMI-A-0 has no monitor section
[ 8.164] (II) AMDGPU(0): EDID for output DisplayPort-0
[ 8.164] (II) AMDGPU(0): Manufacturer: AUS Model: 2708 Serial#: ...
[ 8.164] (II) AMDGPU(0): Year: 2021 Week: 3
[ 8.164] (II) AMDGPU(0): EDID Version: 1.4
[ 8.164] (II) AMDGPU(0): Digital Display Input
[ 8.164] (II) AMDGPU(0): 8 bits per channel
[ 8.164] (II) AMDGPU(0): Digital interface is DisplayPort
[ 8.164] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 59 vert.: 33
[ 8.164] (II) AMDGPU(0): Gamma: 2.20
[ 8.164] (II) AMDGPU(0): DPMS capabilities: StandBy Suspend Off
[ 8.164] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 8.164] (II) AMDGPU(0): Default color space is primary color space
[ 8.164] (II) AMDGPU(0): First detailed timing is preferred mode
[ 8.164] (II) AMDGPU(0): Preferred mode is native pixel format and refresh rate
[ 8.164] (II) AMDGPU(0): Display is continuous-frequency
[ 8.164] (II) AMDGPU(0): redX: 0.647 redY: 0.336 greenX: 0.288 greenY: 0.604
[ 8.164] (II) AMDGPU(0): blueX: 0.143 blueY: 0.069 whiteX: 0.312 whiteY: 0.328
[ 8.164] (II) AMDGPU(0): Supported established timings:
[ 8.164] (II) AMDGPU(0): 720x400@70Hz
[ 8.164] (II) AMDGPU(0): 640x480@60Hz
[ 8.164] (II) AMDGPU(0): 640x480@75Hz
[ 8.164] (II) AMDGPU(0): 800x600@56Hz
[ 8.164] (II) AMDGPU(0): 800x600@60Hz
[ 8.164] (II) AMDGPU(0): 800x600@72Hz
[ 8.164] (II) AMDGPU(0): 800x600@75Hz
[ 8.164] (II) AMDGPU(0): 1024x768@60Hz
[ 8.164] (II) AMDGPU(0): 1024x768@75Hz
[ 8.164] (II) AMDGPU(0): 1280x1024@75Hz
[ 8.164] (II) AMDGPU(0): Manufacturer's mask: 0
[ 8.164] (II) AMDGPU(0): Supported standard timings:
[ 8.164] (II) AMDGPU(0): #0: hsize: 800 vsize 600 refresh: 120 vid: 31813
[ 8.164] (II) AMDGPU(0): #1: hsize: 1024 vsize 768 refresh: 120 vid: 31841
[ 8.164] (II) AMDGPU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 8.164] (II) AMDGPU(0): #3: hsize: 1280 vsize 1024 refresh: 120 vid: 48257
[ 8.164] (II) AMDGPU(0): #4: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 8.164] (II) AMDGPU(0): #5: hsize: 1600 vsize 900 refresh: 120 vid: 64681
[ 8.164] (II) AMDGPU(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 8.164] (II) AMDGPU(0): #7: hsize: 1680 vsize 1050 refresh: 120 vid: 15539
[ 8.164] (II) AMDGPU(0): Supported detailed timing:
[ 8.164] (II) AMDGPU(0): clock: 148.5 MHz Image Size: 597 x 336 mm
[ 8.164] (II) AMDGPU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 8.164] (II) AMDGPU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 8.164] (II) AMDGPU(0): Ranges: V min: 48 V max: 145 Hz, H min: 162 H max: 162 kHz, PixClock max 355 MHz
[ 8.164] (II) AMDGPU(0): Serial No: M1LMDW010227
[ 8.164] (II) AMDGPU(0): Monitor name: VG2791R
[ 8.164] (II) AMDGPU(0): Supported detailed timing:
[ 8.164] (II) AMDGPU(0): clock: 197.6 MHz Image Size: 597 x 336 mm
[ 8.164] (II) AMDGPU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 8.164] (II) AMDGPU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1120 v_border: 0
[ 8.164] (II) AMDGPU(0): Supported detailed timing:
[ 8.164] (II) AMDGPU(0): clock: 232.5 MHz Image Size: 597 x 336 mm
[ 8.164] (II) AMDGPU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 8.164] (II) AMDGPU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1120 v_border: 0
[ 8.164] (II) AMDGPU(0): Supported detailed timing:
[ 8.164] (II) AMDGPU(0): clock: 279.1 MHz Image Size: 597 x 336 mm
[ 8.164] (II) AMDGPU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 8.164] (II) AMDGPU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1120 v_border: 0
[ 8.164] (II) AMDGPU(0): Supported detailed timing:
[ 8.164] (II) AMDGPU(0): clock: 334.5 MHz Image Size: 597 x 336 mm
[ 8.164] (II) AMDGPU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 8.164] (II) AMDGPU(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1120 v_border: 0
[ 8.164] (II) AMDGPU(0): Number of EDID sections to follow: 1
[ 8.164] (II) AMDGPU(0): EDID (in hex):
[ 8.164] (II) AMDGPU(0): 00ffffffffffff0006b3082700000000
[ 8.164] (II) AMDGPU(0): 031f0104a53b2178ffceb0a556499a24
[ 8.164] (II) AMDGPU(0): 115054a7cb00457c617c818081bca9c0
[ 8.164] (II) AMDGPU(0): a9fcb300b33c023a801871382d40582c
[ 8.164] (II) AMDGPU(0): 450055502100001e000000fd003091a2
[ 8.164] (II) AMDGPU(0): a223010a202020202020000000ff004d
[ 8.164] (II) AMDGPU(0): 314c4d44573031303232370a000000fc
[ 8.164] (II) AMDGPU(0): 00564732373931520a20202020200175
[ 8.164] (II) AMDGPU(0): 0203257450101f010204050611131415
[ 8.164] (II) AMDGPU(0): 2021223f40230907078301000067030c
[ 8.164] (II) AMDGPU(0): 00100038462b4d80a070382840302035
[ 8.164] (II) AMDGPU(0): 0055502100001ed15a80a07038284030
[ 8.164] (II) AMDGPU(0): 20350055502100001e046d80a0703828
[ 8.164] (II) AMDGPU(0): 403020350055502100001ead8280a070
[ 8.164] (II) AMDGPU(0): 3828403020350055502100001e000000
[ 8.164] (II) AMDGPU(0): 00000000000000000000000000000039
[ 8.164] (--) AMDGPU(0): HDMI max TMDS frequency 350000KHz
[ 8.165] (II) AMDGPU(0): Printing probed modes for output DisplayPort-0
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x143.6 334.53 1920 1968 2000 2080 1080 1083 1088 1120 +hsync +vsync (160.8 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x120.0 297.00 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (135.0 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x100.0 297.00 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (112.5 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x119.9 296.70 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (134.9 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x119.8 279.08 1920 1968 2000 2080 1080 1083 1088 1120 +hsync +vsync (134.2 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x99.8 232.49 1920 1968 2000 2080 1080 1083 1088 1120 +hsync +vsync (111.8 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x84.8 197.55 1920 1968 2000 2080 1080 1083 1088 1120 +hsync +vsync (95.0 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x30.0 74.25 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x25.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x24.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x30.0 74.18 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1920x1080"x24.0 74.18 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1680x1050"x119.9 313.89 1680 1816 2000 2320 1050 1053 1059 1128 -hsync +vsync (135.3 kHz)
[ 8.165] (II) AMDGPU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1600x900"x120.0 254.32 1600 1728 1896 2192 900 903 908 967 -hsync +vsync (116.0 kHz)
[ 8.165] (II) AMDGPU(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1280x1024"x120.0 232.25 1280 1384 1520 1760 1024 1027 1034 1100 -hsync +vsync (132.0 kHz)
[ 8.165] (II) AMDGPU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1440x900"x60.0 148.50 1440 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1280x800"x60.0 148.50 1280 2008 2052 2200 800 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1024x768"x119.9 137.89 1024 1104 1208 1392 768 771 775 826 -hsync +vsync (99.1 kHz)
[ 8.165] (II) AMDGPU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "800x600"x119.9 83.06 800 856 936 1072 600 603 607 646 -hsync +vsync (77.5 kHz)
[ 8.165] (II) AMDGPU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 8.165] (II) AMDGPU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 8.165] (II) AMDGPU(0): EDID for output DisplayPort-1
[ 8.165] (II) AMDGPU(0): EDID for output DisplayPort-2
[ 8.165] (II) AMDGPU(0): EDID for output HDMI-A-0
[ 8.165] (II) AMDGPU(0): Output DisplayPort-0 connected
[ 8.165] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[ 8.165] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[ 8.165] (II) AMDGPU(0): Output HDMI-A-0 disconnected
[ 8.165] (II) AMDGPU(0): Using exact sizes for initial modes
[ 8.165] (II) AMDGPU(0): Output DisplayPort-0 using initial mode 1920x1080 +0+0
[ 8.165] (II) AMDGPU(0): mem size init: gart size :3e3407000 vram size: s:5fc586000 visible:5fc586000
[ 8.165] (==) AMDGPU(0): DPI set to (96, 96)
[ 8.165] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 8.165] (II) Loading sub module "ramdac"
[ 8.165] (II) LoadModule: "ramdac"
[ 8.165] (II) Module "ramdac" already built-in
[ 8.165] (II) UnloadModule: "modesetting"
[ 8.165] (II) Unloading modesetting
[ 8.165] (II) AMDGPU(0): [DRI2] Setup complete
[ 8.165] (II) AMDGPU(0): [DRI2] DRI driver: radeonsi
[ 8.165] (II) AMDGPU(0): [DRI2] VDPAU driver: radeonsi
[ 8.231] (II) AMDGPU(0): Front buffer pitch: 8192 bytes
[ 8.232] (II) AMDGPU(0): SYNC extension fences enabled
[ 8.232] (II) AMDGPU(0): Present extension enabled
[ 8.232] (==) AMDGPU(0): DRI3 enabled
[ 8.232] (==) AMDGPU(0): Backing store enabled
[ 8.232] (II) AMDGPU(0): Direct rendering enabled
[ 8.251] (II) AMDGPU(0): Use GLAMOR acceleration.
[ 8.251] (II) AMDGPU(0): Acceleration enabled
[ 8.251] (==) AMDGPU(0): DPMS enabled
[ 8.251] (==) AMDGPU(0): Silken mouse enabled
[ 8.251] (II) AMDGPU(0): Set up textured video (glamor)
[ 8.260] (WW) AMDGPU(0): Option "HotplugDriver" is not used
[ 8.260] (II) Initializing extension Generic Event Extension
[ 8.260] (II) Initializing extension SHAPE
[ 8.260] (II) Initializing extension MIT-SHM
[ 8.260] (II) Initializing extension XInputExtension
[ 8.260] (II) Initializing extension XTEST
[ 8.260] (II) Initializing extension BIG-REQUESTS
[ 8.260] (II) Initializing extension SYNC
[ 8.261] (II) Initializing extension XKEYBOARD
[ 8.261] (II) Initializing extension XC-MISC
[ 8.261] (II) Initializing extension SECURITY
[ 8.261] (II) Initializing extension XFIXES
[ 8.261] (II) Initializing extension RENDER
[ 8.261] (II) Initializing extension RANDR
[ 8.262] (II) Initializing extension COMPOSITE
[ 8.262] (II) Initializing extension DAMAGE
[ 8.262] (II) Initializing extension MIT-SCREEN-SAVER
[ 8.262] (II) Initializing extension DOUBLE-BUFFER
[ 8.262] (II) Initializing extension RECORD
[ 8.262] (II) Initializing extension DPMS
[ 8.262] (II) Initializing extension Present
[ 8.262] (II) Initializing extension DRI3
[ 8.262] (II) Initializing extension X-Resource
[ 8.262] (II) Initializing extension XVideo
[ 8.263] (II) Initializing extension XVideo-MotionCompensation
[ 8.263] (II) Initializing extension GLX
[ 8.269] (II) AIGLX: Loaded and initialized radeonsi
[ 8.269] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 8.269] (II) Initializing extension XFree86-VidModeExtension
[ 8.269] (II) Initializing extension XFree86-DGA
[ 8.269] (II) Initializing extension XFree86-DRI
[ 8.269] (II) Initializing extension DRI2
[ 8.270] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[ 8.356] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 8.356] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.356] (II) LoadModule: "libinput"
[ 8.356] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 8.358] (II) Module libinput: vendor="X.Org Foundation"
[ 8.358] compiled for 1.21.1.13, module version = 1.5.0
[ 8.358] Module class: X.Org XInput Driver
[ 8.358] ABI class: X.Org XInput driver, version 24.4
[ 8.358] (II) Using input driver 'libinput' for 'Power Button'
[ 8.358] (**) Power Button: always reports core events
[ 8.358] (**) Option "Device" "/dev/input/event2"
[ 8.360] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 8.360] (II) event2 - Power Button: device is a keyboard
[ 8.360] (II) event2 - Power Button: device removed
[ 8.360] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 8.360] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 8.361] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 8.361] (II) event2 - Power Button: device is a keyboard
[ 8.361] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 8.361] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 8.361] (II) Using input driver 'libinput' for 'Power Button'
[ 8.361] (**) Power Button: always reports core events
[ 8.361] (**) Option "Device" "/dev/input/event1"
[ 8.361] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 8.361] (II) event1 - Power Button: device is a keyboard
[ 8.361] (II) event1 - Power Button: device removed
[ 8.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 8.361] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 8.361] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 8.361] (II) event1 - Power Button: device is a keyboard
[ 8.362] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 8.362] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 8.362] (II) Using input driver 'libinput' for 'Sleep Button'
[ 8.362] (**) Sleep Button: always reports core events
[ 8.362] (**) Option "Device" "/dev/input/event0"
[ 8.362] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 8.362] (II) event0 - Sleep Button: device is a keyboard
[ 8.362] (II) event0 - Sleep Button: device removed
[ 8.362] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 8.362] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 8.362] (II) event0 - Sleep Button: is tagged by udev as: Keyboard
[ 8.362] (II) event0 - Sleep Button: device is a keyboard
[ 8.362] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event16)
[ 8.362] (II) No input driver specified, ignoring this device.
[ 8.362] (II) This device may have been added with another device file.
[ 8.362] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event17)
[ 8.362] (II) No input driver specified, ignoring this device.
[ 8.362] (II) This device may have been added with another device file.
[ 8.363] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event18)
[ 8.363] (II) No input driver specified, ignoring this device.
[ 8.363] (II) This device may have been added with another device file.
[ 8.363] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event19)
[ 8.363] (II) No input driver specified, ignoring this device.
[ 8.363] (II) This device may have been added with another device file.
[ 8.363] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 8.363] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 8.363] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 8.363] (**) Logitech USB Receiver: always reports core events
[ 8.363] (**) Option "Device" "/dev/input/event5"
[ 8.415] (II) event5 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 8.415] (II) event5 - Logitech USB Receiver: device is a pointer
[ 8.416] (II) event5 - Logitech USB Receiver: device removed
[ 8.428] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.428] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.428] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.428] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:046D:C54D.0003/input/input6/event5"
[ 8.428] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[ 8.428] (**) Option "AccelerationScheme" "none"
[ 8.428] (**) Logitech USB Receiver: (accel) selected scheme none/0
[ 8.428] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 8.428] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 8.481] (II) event5 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 8.481] (II) event5 - Logitech USB Receiver: device is a pointer
[ 8.482] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 8.482] (II) No input driver specified, ignoring this device.
[ 8.482] (II) This device may have been added with another device file.
[ 8.483] (II) config/udev: Adding input device Logitech USB Receiver Keyboard (/dev/input/event6)
[ 8.483] (**) Logitech USB Receiver Keyboard: Applying InputClass "libinput keyboard catchall"
[ 8.483] (II) Using input driver 'libinput' for 'Logitech USB Receiver Keyboard'
[ 8.483] (**) Logitech USB Receiver Keyboard: always reports core events
[ 8.483] (**) Option "Device" "/dev/input/event6"
[ 8.485] (II) event6 - Logitech USB Receiver Keyboard: is tagged by udev as: Keyboard
[ 8.485] (II) event6 - Logitech USB Receiver Keyboard: device is a keyboard
[ 8.485] (II) event6 - Logitech USB Receiver Keyboard: device removed
[ 8.486] (II) libinput: Logitech USB Receiver Keyboard: needs a virtual subdevice
[ 8.486] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C54D.0004/input/input7/event6"
[ 8.486] (II) XINPUT: Adding extended input device "Logitech USB Receiver Keyboard" (type: MOUSE, id 10)
[ 8.486] (**) Option "AccelerationScheme" "none"
[ 8.486] (**) Logitech USB Receiver Keyboard: (accel) selected scheme none/0
[ 8.486] (**) Logitech USB Receiver Keyboard: (accel) acceleration factor: 2.000
[ 8.486] (**) Logitech USB Receiver Keyboard: (accel) acceleration threshold: 4
[ 8.486] (II) event6 - Logitech USB Receiver Keyboard: is tagged by udev as: Keyboard
[ 8.486] (II) event6 - Logitech USB Receiver Keyboard: device is a keyboard
[ 8.486] (II) config/udev: Adding input device Akko 2.4G Wireless Keyboard (/dev/input/event7)
[ 8.486] (**) Akko 2.4G Wireless Keyboard: Applying InputClass "libinput keyboard catchall"
[ 8.486] (II) Using input driver 'libinput' for ' Akko 2.4G Wireless Keyboard'
[ 8.486] (**) Akko 2.4G Wireless Keyboard: always reports core events
[ 8.486] (**) Option "Device" "/dev/input/event7"
[ 8.487] (II) event7 - Akko 2.4G Wireless Keyboard: is tagged by udev as: Keyboard
[ 8.487] (II) event7 - Akko 2.4G Wireless Keyboard: device is a keyboard
[ 8.487] (II) event7 - Akko 2.4G Wireless Keyboard: device removed
[ 8.487] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4:1.0/0003:25A7:2420.0006/input/input8/event7"
[ 8.487] (II) XINPUT: Adding extended input device " Akko 2.4G Wireless Keyboard" (type: KEYBOARD, id 11)
[ 8.487] (II) event7 - Akko 2.4G Wireless Keyboard: is tagged by udev as: Keyboard
[ 8.487] (II) event7 - Akko 2.4G Wireless Keyboard: device is a keyboard
[ 8.488] (II) config/udev: Adding input device Akko 2.4G Wireless Keyboard System Control (/dev/input/event9)
[ 8.488] (**) Akko 2.4G Wireless Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 8.488] (II) Using input driver 'libinput' for ' Akko 2.4G Wireless Keyboard System Control'
[ 8.488] (**) Akko 2.4G Wireless Keyboard System Control: always reports core events
[ 8.488] (**) Option "Device" "/dev/input/event9"
[ 8.488] (II) event9 - Akko 2.4G Wireless Keyboard System Control: is tagged by udev as: Keyboard
[ 8.488] (II) event9 - Akko 2.4G Wireless Keyboard System Control: device is a keyboard
[ 8.488] (II) event9 - Akko 2.4G Wireless Keyboard System Control: device removed
[ 8.488] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4:1.1/0003:25A7:2420.0007/input/input10/event9"
[ 8.488] (II) XINPUT: Adding extended input device " Akko 2.4G Wireless Keyboard System Control" (type: KEYBOARD, id 12)
[ 8.489] (II) event9 - Akko 2.4G Wireless Keyboard System Control: is tagged by udev as: Keyboard
[ 8.489] (II) event9 - Akko 2.4G Wireless Keyboard System Control: device is a keyboard
[ 8.489] (II) config/udev: Adding input device Akko 2.4G Wireless Keyboard (/dev/input/event10)
[ 8.489] (**) Akko 2.4G Wireless Keyboard: Applying InputClass "libinput keyboard catchall"
[ 8.489] (II) Using input driver 'libinput' for ' Akko 2.4G Wireless Keyboard'
[ 8.489] (**) Akko 2.4G Wireless Keyboard: always reports core events
[ 8.489] (**) Option "Device" "/dev/input/event10"
[ 8.489] (II) event10 - Akko 2.4G Wireless Keyboard: is tagged by udev as: Keyboard
[ 8.489] (II) event10 - Akko 2.4G Wireless Keyboard: device is a keyboard
[ 8.489] (II) event10 - Akko 2.4G Wireless Keyboard: device removed
[ 8.489] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4:1.1/0003:25A7:2420.0007/input/input11/event10"
[ 8.489] (II) XINPUT: Adding extended input device " Akko 2.4G Wireless Keyboard" (type: KEYBOARD, id 13)
[ 8.490] (II) event10 - Akko 2.4G Wireless Keyboard: is tagged by udev as: Keyboard
[ 8.490] (II) event10 - Akko 2.4G Wireless Keyboard: device is a keyboard
[ 8.490] (II) config/udev: Adding input device Akko 2.4G Wireless Keyboard Mouse (/dev/input/event11)
[ 8.490] (**) Akko 2.4G Wireless Keyboard Mouse: Applying InputClass "libinput pointer catchall"
[ 8.490] (II) Using input driver 'libinput' for ' Akko 2.4G Wireless Keyboard Mouse'
[ 8.490] (**) Akko 2.4G Wireless Keyboard Mouse: always reports core events
[ 8.490] (**) Option "Device" "/dev/input/event11"
[ 8.491] (II) event11 - Akko 2.4G Wireless Keyboard Mouse: is tagged by udev as: Mouse
[ 8.491] (II) event11 - Akko 2.4G Wireless Keyboard Mouse: device is a pointer
[ 8.491] (II) event11 - Akko 2.4G Wireless Keyboard Mouse: device removed
[ 8.506] (II) libinput: Akko 2.4G Wireless Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.506] (II) libinput: Akko 2.4G Wireless Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.506] (II) libinput: Akko 2.4G Wireless Keyboard Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 8.506] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4:1.1/0003:25A7:2420.0007/input/input12/event11"
[ 8.506] (II) XINPUT: Adding extended input device " Akko 2.4G Wireless Keyboard Mouse" (type: MOUSE, id 14)
[ 8.506] (**) Option "AccelerationScheme" "none"
[ 8.506] (**) Akko 2.4G Wireless Keyboard Mouse: (accel) selected scheme none/0
[ 8.506] (**) Akko 2.4G Wireless Keyboard Mouse: (accel) acceleration factor: 2.000
[ 8.506] (**) Akko 2.4G Wireless Keyboard Mouse: (accel) acceleration threshold: 4
[ 8.508] (II) event11 - Akko 2.4G Wireless Keyboard Mouse: is tagged by udev as: Mouse
[ 8.508] (II) event11 - Akko 2.4G Wireless Keyboard Mouse: device is a pointer
[ 8.510] (II) config/udev: Adding input device Akko 2.4G Wireless Keyboard Mouse (/dev/input/mouse1)
[ 8.510] (II) No input driver specified, ignoring this device.
[ 8.510] (II) This device may have been added with another device file.
[ 8.510] (II) config/udev: Adding input device Akko 2.4G Wireless Keyboard (/dev/input/event12)
[ 8.510] (II) No input driver specified, ignoring this device.
[ 8.510] (II) This device may have been added with another device file.
[ 8.511] (II) config/udev: Adding input device Akko 2.4G Wireless Keyboard Consumer Control (/dev/input/event8)
[ 8.511] (**) Akko 2.4G Wireless Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.511] (II) Using input driver 'libinput' for ' Akko 2.4G Wireless Keyboard Consumer Control'
[ 8.511] (**) Akko 2.4G Wireless Keyboard Consumer Control: always reports core events
[ 8.511] (**) Option "Device" "/dev/input/event8"
[ 8.513] (II) event8 - Akko 2.4G Wireless Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 8.513] (II) event8 - Akko 2.4G Wireless Keyboard Consumer Control: device is a keyboard
[ 8.513] (II) event8 - Akko 2.4G Wireless Keyboard Consumer Control: device removed
[ 8.513] (II) libinput: Akko 2.4G Wireless Keyboard Consumer Control: needs a virtual subdevice
[ 8.513] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4:1.1/0003:25A7:2420.0007/input/input9/event8"
[ 8.513] (II) XINPUT: Adding extended input device " Akko 2.4G Wireless Keyboard Consumer Control" (type: MOUSE, id 15)
[ 8.513] (**) Option "AccelerationScheme" "none"
[ 8.513] (**) Akko 2.4G Wireless Keyboard Consumer Control: (accel) selected scheme none/0
[ 8.513] (**) Akko 2.4G Wireless Keyboard Consumer Control: (accel) acceleration factor: 2.000
[ 8.513] (**) Akko 2.4G Wireless Keyboard Consumer Control: (accel) acceleration threshold: 4
[ 8.514] (II) event8 - Akko 2.4G Wireless Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 8.514] (II) event8 - Akko 2.4G Wireless Keyboard Consumer Control: device is a keyboard
[ 8.515] (II) config/udev: Adding input device Logitech PRO X Wireless Gaming Headset Consumer Control (/dev/input/event3)
[ 8.515] (**) Logitech PRO X Wireless Gaming Headset Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.515] (II) Using input driver 'libinput' for 'Logitech PRO X Wireless Gaming Headset Consumer Control'
[ 8.515] (**) Logitech PRO X Wireless Gaming Headset Consumer Control: always reports core events
[ 8.515] (**) Option "Device" "/dev/input/event3"
[ 8.516] (II) event3 - Logitech PRO X Wireless Gaming Headset Consumer Control: is tagged by udev as: Keyboard
[ 8.516] (II) event3 - Logitech PRO X Wireless Gaming Headset Consumer Control: device is a keyboard
[ 8.516] (II) event3 - Logitech PRO X Wireless Gaming Headset Consumer Control: device removed
[ 8.533] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.3/0003:046D:0ABA.0002/input/input3/event3"
[ 8.533] (II) XINPUT: Adding extended input device "Logitech PRO X Wireless Gaming Headset Consumer Control" (type: KEYBOARD, id 16)
[ 8.535] (II) event3 - Logitech PRO X Wireless Gaming Headset Consumer Control: is tagged by udev as: Keyboard
[ 8.535] (II) event3 - Logitech PRO X Wireless Gaming Headset Consumer Control: device is a keyboard
[ 8.536] (II) config/udev: Adding input device Logitech PRO X Wireless Gaming Headset (/dev/input/event4)
[ 8.536] (II) No input driver specified, ignoring this device.
[ 8.536] (II) This device may have been added with another device file.
[ 8.537] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event20)
[ 8.537] (II) No input driver specified, ignoring this device.
[ 8.537] (II) This device may have been added with another device file.
[ 8.537] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event21)
[ 8.537] (II) No input driver specified, ignoring this device.
[ 8.537] (II) This device may have been added with another device file.
[ 8.538] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event22)
[ 8.538] (II) No input driver specified, ignoring this device.
[ 8.538] (II) This device may have been added with another device file.
[ 8.538] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event23)
[ 8.538] (II) No input driver specified, ignoring this device.
[ 8.538] (II) This device may have been added with another device file.
[ 8.539] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event24)
[ 8.539] (II) No input driver specified, ignoring this device.
[ 8.539] (II) This device may have been added with another device file.
[ 8.539] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event14)
[ 8.539] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 8.539] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 8.539] (**) Asus WMI hotkeys: always reports core events
[ 8.539] (**) Option "Device" "/dev/input/event14"
[ 8.540] (II) event14 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 8.540] (II) event14 - Asus WMI hotkeys: device is a keyboard
[ 8.540] (II) event14 - Asus WMI hotkeys: device removed
[ 8.553] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event14"
[ 8.553] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 17)
[ 8.554] (II) event14 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 8.554] (II) event14 - Asus WMI hotkeys: device is a keyboard
[ 8.555] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event15)
[ 8.555] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 8.555] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 8.555] (**) Eee PC WMI hotkeys: always reports core events
[ 8.555] (**) Option "Device" "/dev/input/event15"
[ 8.556] (II) event15 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 8.556] (II) event15 - Eee PC WMI hotkeys: device is a keyboard
[ 8.556] (II) event15 - Eee PC WMI hotkeys: device removed
[ 8.566] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input16/event15"
[ 8.566] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 18)
[ 8.567] (II) event15 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 8.567] (II) event15 - Eee PC WMI hotkeys: device is a keyboard
[ 8.568] (II) config/udev: Adding input device PC Speaker (/dev/input/event13)
[ 8.568] (II) No input driver specified, ignoring this device.
[ 8.568] (II) This device may have been added with another device file.
[ 8.576] (**) Logitech USB Receiver Keyboard: Applying InputClass "libinput keyboard catchall"
[ 8.576] (II) Using input driver 'libinput' for 'Logitech USB Receiver Keyboard'
[ 8.576] (**) Logitech USB Receiver Keyboard: always reports core events
[ 8.576] (**) Option "Device" "/dev/input/event6"
[ 8.576] (II) libinput: Logitech USB Receiver Keyboard: is a virtual subdevice
[ 8.576] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:046D:C54D.0004/input/input7/event6"
[ 8.576] (II) XINPUT: Adding extended input device "Logitech USB Receiver Keyboard" (type: KEYBOARD, id 19)
[ 8.576] (**) Akko 2.4G Wireless Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 8.576] (II) Using input driver 'libinput' for ' Akko 2.4G Wireless Keyboard Consumer Control'
[ 8.576] (**) Akko 2.4G Wireless Keyboard Consumer Control: always reports core events
[ 8.576] (**) Option "Device" "/dev/input/event8"
[ 8.576] (II) libinput: Akko 2.4G Wireless Keyboard Consumer Control: is a virtual subdevice
[ 8.576] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.4/1-11.4:1.1/0003:25A7:2420.0007/input/input9/event8"
[ 8.576] (II) XINPUT: Adding extended input device " Akko 2.4G Wireless Keyboard Consumer Control" (type: KEYBOARD, id 20)
[ 13.326] (WW) AMDGPU(0): flip queue failed: Invalid argument
[ 13.326] (WW) AMDGPU(0): Page flip failed: Invalid argument
[ 13.621] (II) event2 - Power Button: device removed
[ 13.621] (II) event1 - Power Button: device removed
[ 13.621] (II) event0 - Sleep Button: device removed
[ 13.621] (II) event5 - Logitech USB Receiver: device removed
[ 13.630] (II) event7 - Akko 2.4G Wireless Keyboard: device removed
[ 13.630] (II) event9 - Akko 2.4G Wireless Keyboard System Control: device removed
[ 13.630] (II) event10 - Akko 2.4G Wireless Keyboard: device removed
[ 13.630] (II) event11 - Akko 2.4G Wireless Keyboard Mouse: device removed
[ 13.643] (II) event3 - Logitech PRO X Wireless Gaming Headset Consumer Control: device removed
[ 13.652] (II) event14 - Asus WMI hotkeys: device removed
[ 13.658] (II) event15 - Eee PC WMI hotkeys: device removed
[ 13.664] (II) event6 - Logitech USB Receiver Keyboard: device removed
[ 13.664] (II) event8 - Akko 2.4G Wireless Keyboard Consumer Control: device removed
[ 13.664] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.951] (II) UnloadModule: "libinput"
[ 338.964] (II) Server terminated successfully (0). Closing log file.