[ 12.731] (--) Log file renamed from "/var/log/Xorg.pid-1164.log" to "/var/log/Xorg.0.log" [ 12.731] X.Org X Server 1.21.1.16 X Protocol Version 11, Revision 0 [ 12.731] Current Operating System: Linux XXX 6.13.6-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 07 Mar 2025 20:19:00 +0000 x86_64 [ 12.731] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=HASH_1ED-A3F3-6DE2-9B86-7270D80C9F64 zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs quiet splash NVreg_EnableGpuFirmware=0 [ 12.731] [ 12.731] Current version of pixman: 0.44.2 [ 12.731] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 12.731] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 12.731] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 13 09:35:29 2025 [ 12.732] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 12.732] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 12.732] (==) No Layout section. Using the first Screen section. [ 12.732] (==) No screen section available. Using defaults. [ 12.732] (**) |-->Screen "Default Screen Section" (0) [ 12.732] (**) | |-->Monitor "<default monitor>" [ 12.732] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 12.732] (**) Allowing byte-swapped clients [ 12.732] (==) Automatically adding devices [ 12.732] (==) Automatically enabling devices [ 12.732] (==) Automatically adding GPU devices [ 12.732] (==) Automatically binding GPU devices [ 12.732] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 12.732] (WW) The directory "/usr/share/fonts/misc" does not exist. [ 12.732] Entry deleted from font path. [ 12.732] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 12.732] Entry deleted from font path. [ 12.732] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 12.732] (WW) The directory "/usr/share/fonts/OTF" does not exist. [ 12.732] Entry deleted from font path. [ 12.732] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 12.732] Entry deleted from font path. [ 12.732] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 12.732] Entry deleted from font path. [ 12.732] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 12.732] Entry deleted from font path. [ 12.732] (==) FontPath set to: [ 12.732] (==) ModulePath set to "/usr/lib/xorg/modules" [ 12.732] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 12.732] (II) Module ABI versions: [ 12.732] X.Org ANSI C Emulation: 0.4 [ 12.732] X.Org Video Driver: 25.2 [ 12.732] X.Org XInput driver : 24.4 [ 12.732] X.Org Server Extension : 10.0 [ 12.733] (++) using VT number 2 [ 12.733] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 12.733] (II) xfree86: Adding drm device (/dev/dri/card1) [ 12.733] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 [ 12.739] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules" [ 12.739] (--) PCI:*(1@0:0:0) 10de:2702:1462:511c rev 161, Mem @ 0x40000000/16777216, 0x4000000000/17179869184, 0x4400000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288 [ 12.739] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 12.739] (II) LoadModule: "glx" [ 12.740] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.741] (II) Module glx: vendor="X.Org Foundation" [ 12.741] compiled for 1.21.1.16, module version = 1.0.0 [ 12.741] ABI class: X.Org Server Extension, version 10.0 [ 12.741] (II) Applying OutputClass "nvidia" to /dev/dri/card1 [ 12.741] loading driver: nvidia [ 12.741] (==) Matched nvidia as autoconfigured driver 0 [ 12.741] (==) Matched nouveau as autoconfigured driver 1 [ 12.741] (==) Matched nv as autoconfigured driver 2 [ 12.741] (==) Matched modesetting as autoconfigured driver 3 [ 12.741] (==) Matched fbdev as autoconfigured driver 4 [ 12.741] (==) Matched vesa as autoconfigured driver 5 [ 12.741] (==) Assigned the driver to the xf86ConfigLayout [ 12.741] (II) LoadModule: "nvidia" [ 12.741] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 12.744] (II) Module nvidia: vendor="NVIDIA Corporation" [ 12.744] compiled for 1.6.99.901, module version = 1.0.0 [ 12.744] Module class: X.Org Video Driver [ 12.744] (II) LoadModule: "nouveau" [ 12.744] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 12.745] (II) Module nouveau: vendor="X.Org Foundation" [ 12.745] compiled for 1.21.1.14, module version = 1.0.18 [ 12.745] Module class: X.Org Video Driver [ 12.745] ABI class: X.Org Video Driver, version 25.2 [ 12.745] (II) LoadModule: "nv" [ 12.745] (WW) Warning, couldn't open module nv [ 12.745] (EE) Failed to load module "nv" (module does not exist, 0) [ 12.745] (II) LoadModule: "modesetting" [ 12.745] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 12.746] (II) Module modesetting: vendor="X.Org Foundation" [ 12.746] compiled for 1.21.1.16, module version = 1.21.1 [ 12.746] Module class: X.Org Video Driver [ 12.746] ABI class: X.Org Video Driver, version 25.2 [ 12.746] (II) LoadModule: "fbdev" [ 12.746] (WW) Warning, couldn't open module fbdev [ 12.746] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 12.746] (II) LoadModule: "vesa" [ 12.746] (WW) Warning, couldn't open module vesa [ 12.746] (EE) Failed to load module "vesa" (module does not exist, 0) [ 12.746] (II) NVIDIA dlloader X Driver 570.124.04 Tue Feb 25 03:40:59 UTC 2025 [ 12.746] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 12.746] (II) NOUVEAU driver [ 12.746] (II) NOUVEAU driver for NVIDIA chipset families : [ 12.746] RIVA TNT (NV04) [ 12.746] RIVA TNT2 (NV05) [ 12.746] GeForce 256 (NV10) [ 12.746] GeForce 2 (NV11, NV15) [ 12.746] GeForce 4MX (NV17, NV18) [ 12.746] GeForce 3 (NV20) [ 12.746] GeForce 4Ti (NV25, NV28) [ 12.746] GeForce FX (NV3x) [ 12.746] GeForce 6 (NV4x) [ 12.746] GeForce 7 (G7x) [ 12.746] GeForce 8 (G8x) [ 12.746] GeForce 9 (G9x) [ 12.746] GeForce GTX 2xx/3xx (GT2xx) [ 12.746] GeForce GTX 4xx/5xx (GFxxx) [ 12.746] GeForce GTX 6xx/7xx (GKxxx) [ 12.746] GeForce GTX 9xx (GMxxx) [ 12.746] GeForce GTX 10xx (GPxxx) [ 12.746] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 12.746] (II) Loading sub module "fb" [ 12.746] (II) LoadModule: "fb" [ 12.746] (II) Module "fb" already built-in [ 12.746] (II) Loading sub module "wfb" [ 12.746] (II) LoadModule: "wfb" [ 12.746] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 12.747] (II) Module wfb: vendor="X.Org Foundation" [ 12.747] compiled for 1.21.1.16, module version = 1.0.0 [ 12.747] ABI class: X.Org ANSI C Emulation, version 0.4 [ 12.747] (WW) Falling back to old probe method for modesetting [ 12.747] (EE) open /dev/dri/card0: No such file or directory [ 12.747] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 12.747] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 12.747] (==) NVIDIA(0): RGB weight 888 [ 12.747] (==) NVIDIA(0): Default visual is TrueColor [ 12.747] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 12.747] (II) Applying OutputClass "nvidia" options to /dev/dri/card1 [ 12.747] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" [ 12.747] (**) NVIDIA(0): Enabling 2D acceleration [ 12.747] (II) Loading sub module "glxserver_nvidia" [ 12.747] (II) LoadModule: "glxserver_nvidia" [ 12.747] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so [ 12.783] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation" [ 12.783] compiled for 1.6.99.901, module version = 1.0.0 [ 12.783] Module class: X.Org Server Extension [ 12.783] (II) NVIDIA GLX Module 570.124.04 Tue Feb 25 03:45:00 UTC 2025 [ 12.783] (II) NVIDIA: The X server supports PRIME Render Offload. [ 12.784] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0 [ 12.785] (--) NVIDIA(0): DFP-0 [ 12.785] (--) NVIDIA(0): DFP-1 [ 12.785] (--) NVIDIA(0): DFP-2 [ 12.785] (--) NVIDIA(0): DFP-3 (boot) [ 12.785] (--) NVIDIA(0): DFP-4 [ 12.785] (--) NVIDIA(0): DFP-5 [ 12.785] (--) NVIDIA(0): DFP-6 [ 12.790] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 4080 SUPER (AD103-A) at [ 12.790] (II) NVIDIA(0): PCI:1:0:0 (GPU-0) [ 12.790] (--) NVIDIA(0): Memory: 16769024 kBytes [ 12.790] (--) NVIDIA(0): VideoBIOS: 95.03.44.40.3e [ 12.790] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 12.826] (--) NVIDIA(GPU-0): DFP-0: disconnected [ 12.826] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS [ 12.826] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock [ 12.826] (--) NVIDIA(GPU-0): [ 12.826] (--) NVIDIA(GPU-0): DFP-1: disconnected [ 12.826] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort [ 12.826] (--) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock [ 12.826] (--) NVIDIA(GPU-0): [ 12.826] (--) NVIDIA(GPU-0): DFP-2: disconnected [ 12.826] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS [ 12.826] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock [ 12.826] (--) NVIDIA(GPU-0): [ 12.827] (--) NVIDIA(GPU-0): Dell AW3423DW (DFP-3): connected [ 12.827] (--) NVIDIA(GPU-0): Dell AW3423DW (DFP-3): Internal DisplayPort [ 12.827] (--) NVIDIA(GPU-0): Dell AW3423DW (DFP-3): 2670.0 MHz maximum pixel clock [ 12.827] (--) NVIDIA(GPU-0): [ 12.831] (--) NVIDIA(GPU-0): DFP-4: disconnected [ 12.831] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS [ 12.831] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock [ 12.831] (--) NVIDIA(GPU-0): [ 12.831] (--) NVIDIA(GPU-0): DFP-5: disconnected [ 12.831] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort [ 12.831] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock [ 12.831] (--) NVIDIA(GPU-0): [ 12.832] (--) NVIDIA(GPU-0): DFP-6: disconnected [ 12.832] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS [ 12.832] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock [ 12.832] (--) NVIDIA(GPU-0): [ 12.838] (==) NVIDIA(0): [ 12.838] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 12.838] (==) NVIDIA(0): will be used as the requested mode. [ 12.838] (==) NVIDIA(0): [ 12.840] (II) NVIDIA(0): Validated MetaModes: [ 12.840] (II) NVIDIA(0): "DFP-3:nvidia-auto-select" [ 12.840] (II) NVIDIA(0): Virtual screen size determined to be 3440 x 1440 [ 12.920] (--) NVIDIA(0): DPI set to (107, 104); computed from "UseEdidDpi" X config [ 12.920] (--) NVIDIA(0): option [ 12.920] (II) UnloadModule: "nouveau" [ 12.920] (II) Unloading nouveau [ 12.920] (II) UnloadModule: "modesetting" [ 12.920] (II) Unloading modesetting [ 12.921] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory [ 12.921] (II) NVIDIA: access. [ 12.927] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon [ 12.927] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X [ 12.927] (II) NVIDIA(0): configuration option may not be set correctly. When the [ 12.927] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will [ 12.927] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For [ 12.927] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and [ 12.927] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X [ 12.927] (II) NVIDIA(0): Config Options in the README. [ 12.945] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select" [ 13.042] (==) NVIDIA(0): Disabling shared memory pixmaps [ 13.042] (==) NVIDIA(0): Backing store enabled [ 13.042] (==) NVIDIA(0): Silken mouse enabled [ 13.042] (==) NVIDIA(0): DPMS enabled [ 13.042] (II) Loading sub module "dri2" [ 13.042] (II) LoadModule: "dri2" [ 13.042] (II) Module "dri2" already built-in [ 13.042] (II) NVIDIA(0): [DRI2] Setup complete [ 13.042] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 13.043] (II) Initializing extension Generic Event Extension [ 13.043] (II) Initializing extension SHAPE [ 13.043] (II) Initializing extension MIT-SHM [ 13.043] (II) Initializing extension XInputExtension [ 13.043] (II) Initializing extension XTEST [ 13.043] (II) Initializing extension BIG-REQUESTS [ 13.043] (II) Initializing extension SYNC [ 13.043] (II) Initializing extension XKEYBOARD [ 13.043] (II) Initializing extension XC-MISC [ 13.043] (II) Initializing extension SECURITY [ 13.043] (II) Initializing extension XFIXES [ 13.043] (II) Initializing extension RENDER [ 13.043] (II) Initializing extension RANDR [ 13.043] (II) Initializing extension COMPOSITE [ 13.043] (II) Initializing extension DAMAGE [ 13.043] (II) Initializing extension MIT-SCREEN-SAVER [ 13.043] (II) Initializing extension DOUBLE-BUFFER [ 13.043] (II) Initializing extension RECORD [ 13.043] (II) Initializing extension DPMS [ 13.043] (II) Initializing extension Present [ 13.043] (II) Initializing extension DRI3 [ 13.044] (II) Initializing extension X-Resource [ 13.044] (II) Initializing extension XVideo [ 13.044] (II) Initializing extension XVideo-MotionCompensation [ 13.044] (II) Initializing extension GLX [ 13.044] (II) Initializing extension GLX [ 13.044] (II) Indirect GLX disabled. [ 13.044] (II) GLX: Another vendor is already registered for screen 0 [ 13.044] (II) Initializing extension XFree86-VidModeExtension [ 13.044] (II) Initializing extension XFree86-DGA [ 13.044] (II) Initializing extension XFree86-DRI [ 13.044] (II) Initializing extension DRI2 [ 13.044] (II) Initializing extension NV-GLX [ 13.044] (II) Initializing extension NV-CONTROL [ 13.044] (II) Initializing extension XINERAMA [ 13.088] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 13.088] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 13.088] (**) Power Button: Applying InputClass "system-keyboard" [ 13.088] (II) LoadModule: "libinput" [ 13.088] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 13.089] (II) Module libinput: vendor="X.Org Foundation" [ 13.089] compiled for 1.21.1.13, module version = 1.5.0 [ 13.089] Module class: X.Org XInput Driver [ 13.089] ABI class: X.Org XInput driver, version 24.4 [ 13.089] (II) Using input driver 'libinput' for 'Power Button' [ 13.089] (**) Power Button: always reports core events [ 13.089] (**) Option "Device" "/dev/input/event2" [ 13.091] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 13.091] (II) event2 - Power Button: device is a keyboard [ 13.091] (II) event2 - Power Button: device removed [ 13.110] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 13.110] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 13.110] (**) Option "xkb_model" "pc105+inet" [ 13.110] (**) Option "xkb_layout" "us" [ 13.110] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.118] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 13.118] (II) event2 - Power Button: device is a keyboard [ 13.118] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 13.118] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 13.118] (**) Power Button: Applying InputClass "system-keyboard" [ 13.118] (II) Using input driver 'libinput' for 'Power Button' [ 13.118] (**) Power Button: always reports core events [ 13.118] (**) Option "Device" "/dev/input/event1" [ 13.118] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 13.118] (II) event1 - Power Button: device is a keyboard [ 13.118] (II) event1 - Power Button: device removed [ 13.128] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 13.128] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 13.128] (**) Option "xkb_model" "pc105+inet" [ 13.128] (**) Option "xkb_layout" "us" [ 13.128] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.128] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 13.128] (II) event1 - Power Button: device is a keyboard [ 13.128] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 13.128] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 13.128] (**) Sleep Button: Applying InputClass "system-keyboard" [ 13.128] (II) Using input driver 'libinput' for 'Sleep Button' [ 13.128] (**) Sleep Button: always reports core events [ 13.128] (**) Option "Device" "/dev/input/event0" [ 13.129] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 13.129] (II) event0 - Sleep Button: device is a keyboard [ 13.129] (II) event0 - Sleep Button: device removed [ 13.146] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 13.146] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 13.146] (**) Option "xkb_model" "pc105+inet" [ 13.146] (**) Option "xkb_layout" "us" [ 13.146] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.146] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 13.146] (II) event0 - Sleep Button: device is a keyboard [ 13.147] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event19) [ 13.147] (II) No input driver specified, ignoring this device. [ 13.147] (II) This device may have been added with another device file. [ 13.147] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event20) [ 13.147] (II) No input driver specified, ignoring this device. [ 13.147] (II) This device may have been added with another device file. [ 13.147] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event21) [ 13.147] (II) No input driver specified, ignoring this device. [ 13.147] (II) This device may have been added with another device file. [ 13.147] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event22) [ 13.147] (II) No input driver specified, ignoring this device. [ 13.147] (II) This device may have been added with another device file. [ 13.148] (II) config/udev: Adding input device Keychron Keychron Q3 Max (/dev/input/event8) [ 13.148] (**) Keychron Keychron Q3 Max: Applying InputClass "libinput keyboard catchall" [ 13.148] (**) Keychron Keychron Q3 Max: Applying InputClass "system-keyboard" [ 13.148] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max' [ 13.148] (**) Keychron Keychron Q3 Max: always reports core events [ 13.148] (**) Option "Device" "/dev/input/event8" [ 13.149] (II) event8 - Keychron Keychron Q3 Max: is tagged by udev as: Keyboard [ 13.149] (II) event8 - Keychron Keychron Q3 Max: device is a keyboard [ 13.149] (II) event8 - Keychron Keychron Q3 Max: device removed [ 13.159] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.0/0003:3434:0830.0006/input/input9/event8" [ 13.159] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max" (type: KEYBOARD, id 9) [ 13.159] (**) Option "xkb_model" "pc105+inet" [ 13.159] (**) Option "xkb_layout" "us" [ 13.159] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.160] (II) event8 - Keychron Keychron Q3 Max: is tagged by udev as: Keyboard [ 13.160] (II) event8 - Keychron Keychron Q3 Max: device is a keyboard [ 13.161] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/event9) [ 13.161] (**) Keychron Keychron Q3 Max Mouse: Applying InputClass "libinput pointer catchall" [ 13.161] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Mouse' [ 13.161] (**) Keychron Keychron Q3 Max Mouse: always reports core events [ 13.161] (**) Option "Device" "/dev/input/event9" [ 13.162] (II) event9 - Keychron Keychron Q3 Max Mouse: is tagged by udev as: Mouse [ 13.162] (II) event9 - Keychron Keychron Q3 Max Mouse: device is a pointer [ 13.162] (II) event9 - Keychron Keychron Q3 Max Mouse: device removed [ 13.195] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.195] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.195] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.195] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0008/input/input10/event9" [ 13.195] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Mouse" (type: MOUSE, id 10) [ 13.195] (**) Option "AccelerationScheme" "none" [ 13.195] (**) Keychron Keychron Q3 Max Mouse: (accel) selected scheme none/0 [ 13.195] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration factor: 2.000 [ 13.195] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration threshold: 4 [ 13.199] (II) event9 - Keychron Keychron Q3 Max Mouse: is tagged by udev as: Mouse [ 13.199] (II) event9 - Keychron Keychron Q3 Max Mouse: device is a pointer [ 13.202] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/mouse0) [ 13.202] (II) No input driver specified, ignoring this device. [ 13.202] (II) This device may have been added with another device file. [ 13.204] (II) config/udev: Adding input device Keychron Keychron Q3 Max System Control (/dev/input/event10) [ 13.204] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "libinput keyboard catchall" [ 13.204] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "system-keyboard" [ 13.204] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max System Control' [ 13.204] (**) Keychron Keychron Q3 Max System Control: always reports core events [ 13.204] (**) Option "Device" "/dev/input/event10" [ 13.208] (II) event10 - Keychron Keychron Q3 Max System Control: is tagged by udev as: Keyboard Joystick [ 13.208] (II) event10 - Keychron Keychron Q3 Max System Control: device is a keyboard [ 13.209] (II) event10 - Keychron Keychron Q3 Max System Control: device removed [ 13.230] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0008/input/input11/event10" [ 13.230] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max System Control" (type: KEYBOARD, id 11) [ 13.230] (**) Option "xkb_model" "pc105+inet" [ 13.230] (**) Option "xkb_layout" "us" [ 13.230] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.235] (II) event10 - Keychron Keychron Q3 Max System Control: is tagged by udev as: Keyboard Joystick [ 13.235] (II) event10 - Keychron Keychron Q3 Max System Control: device is a keyboard [ 13.238] (II) config/udev: Adding input device Keychron Keychron Q3 Max Consumer Control (/dev/input/event11) [ 13.238] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 13.238] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 13.238] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 13.238] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 13.238] (**) Option "Device" "/dev/input/event11" [ 13.243] (II) event11 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 13.243] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 13.244] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device removed [ 13.257] (II) libinput: Keychron Keychron Q3 Max Consumer Control: needs a virtual subdevice [ 13.257] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0008/input/input12/event11" [ 13.257] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: MOUSE, id 12) [ 13.257] (**) Option "AccelerationScheme" "none" [ 13.257] (**) Keychron Keychron Q3 Max Consumer Control: (accel) selected scheme none/0 [ 13.257] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration factor: 2.000 [ 13.257] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration threshold: 4 [ 13.261] (II) event11 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 13.262] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 13.264] (II) config/udev: Adding input device Keychron Keychron Q3 Max Keyboard (/dev/input/event12) [ 13.265] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "libinput keyboard catchall" [ 13.265] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "system-keyboard" [ 13.265] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Keyboard' [ 13.265] (**) Keychron Keychron Q3 Max Keyboard: always reports core events [ 13.265] (**) Option "Device" "/dev/input/event12" [ 13.269] (II) event12 - Keychron Keychron Q3 Max Keyboard: is tagged by udev as: Keyboard [ 13.269] (II) event12 - Keychron Keychron Q3 Max Keyboard: device is a keyboard [ 13.270] (II) event12 - Keychron Keychron Q3 Max Keyboard: device removed [ 13.282] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0008/input/input13/event12" [ 13.282] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Keyboard" (type: KEYBOARD, id 13) [ 13.282] (**) Option "xkb_model" "pc105+inet" [ 13.282] (**) Option "xkb_layout" "us" [ 13.282] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.288] (II) event12 - Keychron Keychron Q3 Max Keyboard: is tagged by udev as: Keyboard [ 13.288] (II) event12 - Keychron Keychron Q3 Max Keyboard: device is a keyboard [ 13.293] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller (/dev/input/event6) [ 13.293] (II) No input driver specified, ignoring this device. [ 13.293] (II) This device may have been added with another device file. [ 13.295] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller (/dev/input/js0) [ 13.295] (II) No input driver specified, ignoring this device. [ 13.295] (II) This device may have been added with another device file. [ 13.297] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller Motion Sensors (/dev/input/event7) [ 13.297] (II) No input driver specified, ignoring this device. [ 13.297] (II) This device may have been added with another device file. [ 13.299] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller Motion Sensors (/dev/input/js1) [ 13.299] (II) No input driver specified, ignoring this device. [ 13.299] (II) This device may have been added with another device file. [ 13.300] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller Touchpad (/dev/input/event4) [ 13.300] (**) Sony Interactive Entertainment DualSense Wireless Controller Touchpad: Applying InputClass "libinput touchpad catchall" [ 13.301] (II) Using input driver 'libinput' for 'Sony Interactive Entertainment DualSense Wireless Controller Touchpad' [ 13.301] (**) Sony Interactive Entertainment DualSense Wireless Controller Touchpad: always reports core events [ 13.301] (**) Option "Device" "/dev/input/event4" [ 13.303] (II) event4 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: is tagged by udev as: Touchpad [ 13.304] (II) event4 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: no resolution or size hints, assuming a size of 69x50mm [ 13.306] (II) event4 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: device is a touchpad [ 13.306] (II) event4 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: device removed [ 13.329] (II) libinput: Sony Interactive Entertainment DualSense Wireless Controller Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.329] (II) libinput: Sony Interactive Entertainment DualSense Wireless Controller Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.329] (II) libinput: Sony Interactive Entertainment DualSense Wireless Controller Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.329] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.3/1-5.1.3:1.3/0003:054C:0CE6.0009/input/input27/event4" [ 13.329] (II) XINPUT: Adding extended input device "Sony Interactive Entertainment DualSense Wireless Controller Touchpad" (type: TOUCHPAD, id 14) [ 13.331] (**) Option "AccelerationScheme" "none" [ 13.331] (**) Sony Interactive Entertainment DualSense Wireless Controller Touchpad: (accel) selected scheme none/0 [ 13.331] (**) Sony Interactive Entertainment DualSense Wireless Controller Touchpad: (accel) acceleration factor: 2.000 [ 13.331] (**) Sony Interactive Entertainment DualSense Wireless Controller Touchpad: (accel) acceleration threshold: 4 [ 13.332] (II) event4 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: is tagged by udev as: Touchpad [ 13.333] (II) event4 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: no resolution or size hints, assuming a size of 69x50mm [ 13.335] (II) event4 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: device is a touchpad [ 13.336] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller Touchpad (/dev/input/mouse2) [ 13.336] (II) No input driver specified, ignoring this device. [ 13.336] (II) This device may have been added with another device file. [ 13.337] (II) config/udev: Adding input device Keychron Keychron Q0 Plus (/dev/input/event14) [ 13.337] (**) Keychron Keychron Q0 Plus: Applying InputClass "libinput keyboard catchall" [ 13.337] (**) Keychron Keychron Q0 Plus: Applying InputClass "system-keyboard" [ 13.337] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus' [ 13.337] (**) Keychron Keychron Q0 Plus: always reports core events [ 13.337] (**) Option "Device" "/dev/input/event14" [ 13.338] (II) event14 - Keychron Keychron Q0 Plus: is tagged by udev as: Keyboard [ 13.339] (II) event14 - Keychron Keychron Q0 Plus: device is a keyboard [ 13.339] (II) event14 - Keychron Keychron Q0 Plus: device removed [ 13.355] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.0/0003:3434:0131.000B/input/input15/event14" [ 13.355] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus" (type: KEYBOARD, id 15) [ 13.355] (**) Option "xkb_model" "pc105+inet" [ 13.355] (**) Option "xkb_layout" "us" [ 13.355] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.357] (II) event14 - Keychron Keychron Q0 Plus: is tagged by udev as: Keyboard [ 13.357] (II) event14 - Keychron Keychron Q0 Plus: device is a keyboard [ 13.358] (II) config/udev: Adding input device Keychron Keychron Q0 Plus Mouse (/dev/input/event15) [ 13.358] (**) Keychron Keychron Q0 Plus Mouse: Applying InputClass "libinput pointer catchall" [ 13.358] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus Mouse' [ 13.358] (**) Keychron Keychron Q0 Plus Mouse: always reports core events [ 13.358] (**) Option "Device" "/dev/input/event15" [ 13.360] (II) event15 - Keychron Keychron Q0 Plus Mouse: is tagged by udev as: Mouse [ 13.360] (II) event15 - Keychron Keychron Q0 Plus Mouse: device is a pointer [ 13.360] (II) event15 - Keychron Keychron Q0 Plus Mouse: device removed [ 13.385] (II) libinput: Keychron Keychron Q0 Plus Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.385] (II) libinput: Keychron Keychron Q0 Plus Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.385] (II) libinput: Keychron Keychron Q0 Plus Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.385] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.2/0003:3434:0131.000D/input/input16/event15" [ 13.385] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus Mouse" (type: MOUSE, id 16) [ 13.385] (**) Option "AccelerationScheme" "none" [ 13.385] (**) Keychron Keychron Q0 Plus Mouse: (accel) selected scheme none/0 [ 13.385] (**) Keychron Keychron Q0 Plus Mouse: (accel) acceleration factor: 2.000 [ 13.385] (**) Keychron Keychron Q0 Plus Mouse: (accel) acceleration threshold: 4 [ 13.388] (II) event15 - Keychron Keychron Q0 Plus Mouse: is tagged by udev as: Mouse [ 13.389] (II) event15 - Keychron Keychron Q0 Plus Mouse: device is a pointer [ 13.391] (II) config/udev: Adding input device Keychron Keychron Q0 Plus Mouse (/dev/input/mouse1) [ 13.391] (II) No input driver specified, ignoring this device. [ 13.391] (II) This device may have been added with another device file. [ 13.393] (II) config/udev: Adding input device Keychron Keychron Q0 Plus System Control (/dev/input/event16) [ 13.393] (**) Keychron Keychron Q0 Plus System Control: Applying InputClass "libinput keyboard catchall" [ 13.393] (**) Keychron Keychron Q0 Plus System Control: Applying InputClass "system-keyboard" [ 13.393] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus System Control' [ 13.394] (**) Keychron Keychron Q0 Plus System Control: always reports core events [ 13.394] (**) Option "Device" "/dev/input/event16" [ 13.398] (II) event16 - Keychron Keychron Q0 Plus System Control: is tagged by udev as: Keyboard Joystick [ 13.398] (II) event16 - Keychron Keychron Q0 Plus System Control: device is a keyboard [ 13.398] (II) event16 - Keychron Keychron Q0 Plus System Control: device removed [ 13.418] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.2/0003:3434:0131.000D/input/input17/event16" [ 13.418] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus System Control" (type: KEYBOARD, id 17) [ 13.418] (**) Option "xkb_model" "pc105+inet" [ 13.418] (**) Option "xkb_layout" "us" [ 13.418] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.422] (II) event16 - Keychron Keychron Q0 Plus System Control: is tagged by udev as: Keyboard Joystick [ 13.423] (II) event16 - Keychron Keychron Q0 Plus System Control: device is a keyboard [ 13.424] (II) config/udev: Adding input device Keychron Keychron Q0 Plus Consumer Control (/dev/input/event17) [ 13.424] (**) Keychron Keychron Q0 Plus Consumer Control: Applying InputClass "libinput keyboard catchall" [ 13.424] (**) Keychron Keychron Q0 Plus Consumer Control: Applying InputClass "system-keyboard" [ 13.424] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus Consumer Control' [ 13.424] (**) Keychron Keychron Q0 Plus Consumer Control: always reports core events [ 13.424] (**) Option "Device" "/dev/input/event17" [ 13.425] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: is tagged by udev as: Keyboard [ 13.425] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: device is a keyboard [ 13.425] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: device removed [ 13.446] (II) libinput: Keychron Keychron Q0 Plus Consumer Control: needs a virtual subdevice [ 13.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.2/0003:3434:0131.000D/input/input18/event17" [ 13.446] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus Consumer Control" (type: MOUSE, id 18) [ 13.446] (**) Option "AccelerationScheme" "none" [ 13.446] (**) Keychron Keychron Q0 Plus Consumer Control: (accel) selected scheme none/0 [ 13.446] (**) Keychron Keychron Q0 Plus Consumer Control: (accel) acceleration factor: 2.000 [ 13.446] (**) Keychron Keychron Q0 Plus Consumer Control: (accel) acceleration threshold: 4 [ 13.446] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: is tagged by udev as: Keyboard [ 13.447] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: device is a keyboard [ 13.447] (II) config/udev: Adding input device Keychron Keychron Q0 Plus Keyboard (/dev/input/event18) [ 13.447] (**) Keychron Keychron Q0 Plus Keyboard: Applying InputClass "libinput keyboard catchall" [ 13.447] (**) Keychron Keychron Q0 Plus Keyboard: Applying InputClass "system-keyboard" [ 13.447] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus Keyboard' [ 13.447] (**) Keychron Keychron Q0 Plus Keyboard: always reports core events [ 13.447] (**) Option "Device" "/dev/input/event18" [ 13.448] (II) event18 - Keychron Keychron Q0 Plus Keyboard: is tagged by udev as: Keyboard [ 13.448] (II) event18 - Keychron Keychron Q0 Plus Keyboard: device is a keyboard [ 13.448] (II) event18 - Keychron Keychron Q0 Plus Keyboard: device removed [ 13.464] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.2/0003:3434:0131.000D/input/input19/event18" [ 13.464] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus Keyboard" (type: KEYBOARD, id 19) [ 13.464] (**) Option "xkb_model" "pc105+inet" [ 13.464] (**) Option "xkb_layout" "us" [ 13.464] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.465] (II) event18 - Keychron Keychron Q0 Plus Keyboard: is tagged by udev as: Keyboard [ 13.465] (II) event18 - Keychron Keychron Q0 Plus Keyboard: device is a keyboard [ 13.466] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/event5) [ 13.466] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 13.466] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 13.466] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 13.466] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 13.466] (**) Logitech MX Ergo: always reports core events [ 13.466] (**) Option "Device" "/dev/input/event5" [ 13.467] (II) event5 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 13.467] (II) event5 - Logitech MX Ergo: device set to 380 DPI [ 13.467] (II) event5 - Logitech MX Ergo: device is a pointer [ 13.467] (II) event5 - Logitech MX Ergo: device is a keyboard [ 13.467] (II) event5 - Logitech MX Ergo: device removed [ 13.490] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.490] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.490] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.490] (II) libinput: Logitech MX Ergo: needs a virtual subdevice [ 13.490] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0005/0003:046D:406F.0010/input/input28/event5" [ 13.490] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: MOUSE, id 20) [ 13.490] (**) Option "AccelerationScheme" "none" [ 13.490] (**) Logitech MX Ergo: (accel) selected scheme none/0 [ 13.490] (**) Logitech MX Ergo: (accel) acceleration factor: 2.000 [ 13.490] (**) Logitech MX Ergo: (accel) acceleration threshold: 4 [ 13.492] (II) event5 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 13.492] (II) event5 - Logitech MX Ergo: device set to 380 DPI [ 13.492] (II) event5 - Logitech MX Ergo: device is a pointer [ 13.492] (II) event5 - Logitech MX Ergo: device is a keyboard [ 13.493] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/mouse3) [ 13.493] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 13.493] (II) No input driver specified, ignoring this device. [ 13.493] (II) This device may have been added with another device file. [ 13.494] (II) config/udev: Adding input device Yubico YubiKey OTP+FIDO+CCID (/dev/input/event3) [ 13.494] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "libinput keyboard catchall" [ 13.494] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "system-keyboard" [ 13.494] (II) Using input driver 'libinput' for 'Yubico YubiKey OTP+FIDO+CCID' [ 13.494] (**) Yubico YubiKey OTP+FIDO+CCID: always reports core events [ 13.494] (**) Option "Device" "/dev/input/event3" [ 13.496] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard [ 13.496] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard [ 13.496] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: device removed [ 13.513] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:1050:0407.0001/input/input3/event3" [ 13.513] (II) XINPUT: Adding extended input device "Yubico YubiKey OTP+FIDO+CCID" (type: KEYBOARD, id 21) [ 13.513] (**) Option "xkb_model" "pc105+inet" [ 13.513] (**) Option "xkb_layout" "us" [ 13.513] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.517] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard [ 13.517] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard [ 13.519] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event23) [ 13.519] (II) No input driver specified, ignoring this device. [ 13.519] (II) This device may have been added with another device file. [ 13.520] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event24) [ 13.520] (II) No input driver specified, ignoring this device. [ 13.520] (II) This device may have been added with another device file. [ 13.521] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event25) [ 13.521] (II) No input driver specified, ignoring this device. [ 13.521] (II) This device may have been added with another device file. [ 13.522] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event26) [ 13.522] (II) No input driver specified, ignoring this device. [ 13.522] (II) This device may have been added with another device file. [ 13.523] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event27) [ 13.523] (II) No input driver specified, ignoring this device. [ 13.523] (II) This device may have been added with another device file. [ 13.524] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event28) [ 13.524] (II) No input driver specified, ignoring this device. [ 13.524] (II) This device may have been added with another device file. [ 13.525] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event29) [ 13.525] (II) No input driver specified, ignoring this device. [ 13.525] (II) This device may have been added with another device file. [ 13.526] (II) config/udev: Adding input device PC Speaker (/dev/input/event13) [ 13.526] (II) No input driver specified, ignoring this device. [ 13.526] (II) This device may have been added with another device file. [ 13.542] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 13.542] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 13.542] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 13.542] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 13.542] (**) Option "Device" "/dev/input/event11" [ 13.542] (II) libinput: Keychron Keychron Q3 Max Consumer Control: is a virtual subdevice [ 13.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0008/input/input12/event11" [ 13.542] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: KEYBOARD, id 22) [ 13.542] (**) Option "xkb_model" "pc105+inet" [ 13.542] (**) Option "xkb_layout" "us" [ 13.542] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.542] (**) Keychron Keychron Q0 Plus Consumer Control: Applying InputClass "libinput keyboard catchall" [ 13.542] (**) Keychron Keychron Q0 Plus Consumer Control: Applying InputClass "system-keyboard" [ 13.542] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus Consumer Control' [ 13.542] (**) Keychron Keychron Q0 Plus Consumer Control: always reports core events [ 13.542] (**) Option "Device" "/dev/input/event17" [ 13.542] (II) libinput: Keychron Keychron Q0 Plus Consumer Control: is a virtual subdevice [ 13.542] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.2/0003:3434:0131.000D/input/input18/event17" [ 13.542] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus Consumer Control" (type: KEYBOARD, id 23) [ 13.543] (**) Option "xkb_model" "pc105+inet" [ 13.543] (**) Option "xkb_layout" "us" [ 13.543] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 13.543] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 13.543] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 13.543] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 13.543] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 13.543] (**) Logitech MX Ergo: always reports core events [ 13.543] (**) Option "Device" "/dev/input/event5" [ 13.543] (II) libinput: Logitech MX Ergo: is a virtual subdevice [ 13.543] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.543] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.543] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 13.543] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0005/0003:046D:406F.0010/input/input28/event5" [ 13.543] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: KEYBOARD, id 24) [ 13.543] (**) Option "xkb_model" "pc105+inet" [ 13.543] (**) Option "xkb_layout" "us" [ 13.543] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 64.072] (II) event2 - Power Button: device removed [ 64.082] (II) event1 - Power Button: device removed [ 64.093] (II) event0 - Sleep Button: device removed [ 64.102] (II) event8 - Keychron Keychron Q3 Max: device removed [ 64.111] (II) event9 - Keychron Keychron Q3 Max Mouse: device removed [ 64.134] (II) event10 - Keychron Keychron Q3 Max System Control: device removed [ 64.145] (II) event12 - Keychron Keychron Q3 Max Keyboard: device removed [ 64.155] (II) event4 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: device removed [ 64.177] (II) event14 - Keychron Keychron Q0 Plus: device removed [ 64.185] (II) event15 - Keychron Keychron Q0 Plus Mouse: device removed [ 64.211] (II) event16 - Keychron Keychron Q0 Plus System Control: device removed [ 64.225] (II) event18 - Keychron Keychron Q0 Plus Keyboard: device removed [ 64.241] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: device removed [ 64.250] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device removed [ 64.260] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: device removed [ 64.272] (II) event5 - Logitech MX Ergo: device removed [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.295] (II) UnloadModule: "libinput" [ 64.296] (II) UnloadModule: "libinput" [ 64.296] (II) UnloadModule: "libinput" [ 64.487] (II) NVIDIA(GPU-0): Deleting GPU-0 [ 64.487] (II) Server terminated successfully (0). Closing log file.