[ 100.098] (--) Log file renamed from "/var/log/Xorg.pid-1663.log" to "/var/log/Xorg.0.log" [ 100.136] X.Org X Server 1.21.1.4 X Protocol Version 11, Revision 0 [ 100.136] Current Operating System: Linux XXX 5.15.0-91-generic #101-Ubuntu SMP Tue Nov 14 13:30:08 UTC 2023 x86_64 [ 100.136] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.15.0-91-generic root=UUID=HASH_067-7249-BABD-4909-6D9C82D1997E ro quiet splash vt.handoff=7 [ 100.136] xorg-server 2:21.1.4-2ubuntu1.7~22.04.5 (For technical support please see http://www.ubuntu.com/support) [ 100.136] Current version of pixman: 0.40.0 [ 100.136] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 100.136] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 100.136] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 15 17:38:19 2023 [ 101.221] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 101.221] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 101.763] (==) No Layout section. Using the first Screen section. [ 101.764] (==) No screen section available. Using defaults. [ 101.764] (**) |-->Screen "Default Screen Section" (0) [ 101.764] (**) | |-->Monitor "<default monitor>" [ 101.881] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 101.881] (==) Automatically adding devices [ 101.881] (==) Automatically enabling devices [ 101.881] (==) Automatically adding GPU devices [ 101.882] (==) Automatically binding GPU devices [ 101.882] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 102.398] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 102.398] Entry deleted from font path. [ 102.398] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 102.398] Entry deleted from font path. [ 102.398] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 102.398] Entry deleted from font path. [ 102.406] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 102.406] Entry deleted from font path. [ 102.406] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 102.406] Entry deleted from font path. [ 102.406] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 102.406] (==) ModulePath set to "/usr/lib/xorg/modules" [ 102.406] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 102.406] (II) Loader magic: 0x55df3e12c020 [ 102.406] (II) Module ABI versions: [ 102.406] X.Org ANSI C Emulation: 0.4 [ 102.406] X.Org Video Driver: 25.2 [ 102.406] X.Org XInput driver : 24.4 [ 102.406] X.Org Server Extension : 10.0 [ 102.407] (++) using VT number 1 [ 102.407] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 102.409] (II) xfree86: Adding drm device (/dev/dri/card0) [ 102.409] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0 [ 102.433] (--) PCI:*(0@0:2:0) 8086:0046:103c:1439 rev 2, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00003050/8, BIOS @ 0x????????/131072 [ 102.490] (II) LoadModule: "glx" [ 102.609] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 103.999] (II) Module glx: vendor="X.Org Foundation" [ 103.999] compiled for 1.21.1.4, module version = 1.0.0 [ 103.999] ABI class: X.Org Server Extension, version 10.0 [ 103.999] (==) Matched modesetting as autoconfigured driver 0 [ 103.999] (==) Matched fbdev as autoconfigured driver 1 [ 103.999] (==) Matched vesa as autoconfigured driver 2 [ 103.999] (==) Assigned the driver to the xf86ConfigLayout [ 103.999] (II) LoadModule: "modesetting" [ 103.999] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 104.114] (II) Module modesetting: vendor="X.Org Foundation" [ 104.115] compiled for 1.21.1.4, module version = 1.21.1 [ 104.115] Module class: X.Org Video Driver [ 104.115] ABI class: X.Org Video Driver, version 25.2 [ 104.115] (II) LoadModule: "fbdev" [ 104.115] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 104.188] (II) Module fbdev: vendor="X.Org Foundation" [ 104.188] compiled for 1.21.1.3, module version = 0.5.0 [ 104.188] Module class: X.Org Video Driver [ 104.188] ABI class: X.Org Video Driver, version 25.2 [ 104.188] (II) LoadModule: "vesa" [ 104.188] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 104.189] (II) Module vesa: vendor="X.Org Foundation" [ 104.190] compiled for 1.21.1.3, module version = 2.5.0 [ 104.190] Module class: X.Org Video Driver [ 104.190] ABI class: X.Org Video Driver, version 25.2 [ 104.190] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 104.190] (II) FBDEV: driver for framebuffer: fbdev [ 104.190] (II) VESA: driver for VESA chipsets: vesa [ 104.206] (II) modeset(0): using drv /dev/dri/card0 [ 104.206] (WW) Falling back to old probe method for fbdev [ 104.206] (II) Loading sub module "fbdevhw" [ 104.207] (II) LoadModule: "fbdevhw" [ 104.207] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 104.275] (II) Module fbdevhw: vendor="X.Org Foundation" [ 104.275] compiled for 1.21.1.4, module version = 0.0.2 [ 104.275] ABI class: X.Org Video Driver, version 25.2 [ 104.276] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 104.276] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 104.276] (==) modeset(0): RGB weight 888 [ 104.276] (==) modeset(0): Default visual is TrueColor [ 104.276] (II) Loading sub module "glamoregl" [ 104.276] (II) LoadModule: "glamoregl" [ 104.276] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 105.575] (II) Module glamoregl: vendor="X.Org Foundation" [ 105.575] compiled for 1.21.1.4, module version = 1.0.1 [ 105.575] ABI class: X.Org ANSI C Emulation, version 0.4 [ 128.576] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics (ILK) [ 128.576] (II) modeset(0): glamor initialized [ 128.576] (==) modeset(0): VariableRefresh: disabled [ 128.576] (==) modeset(0): AsyncFlipSecondaries: disabled [ 128.576] (II) modeset(0): Output LVDS-1 has no monitor section [ 128.578] (II) modeset(0): Output VGA-1 has no monitor section [ 128.579] (II) modeset(0): Output HDMI-1 has no monitor section [ 128.580] (II) modeset(0): Output DP-1 has no monitor section [ 128.581] (II) modeset(0): EDID for output LVDS-1 [ 128.581] (II) modeset(0): Manufacturer: AUO Model: 22ec Serial#: ... [ 128.581] (II) modeset(0): Year: 2009 Week: 1 [ 128.581] (II) modeset(0): EDID Version: 1.3 [ 128.581] (II) modeset(0): Digital Display Input [ 128.581] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 128.581] (II) modeset(0): Gamma: 2.20 [ 128.581] (II) modeset(0): No DPMS capabilities specified [ 128.581] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 128.581] (II) modeset(0): First detailed timing is preferred mode [ 128.581] (II) modeset(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570 [ 128.581] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 [ 128.581] (II) modeset(0): Manufacturer's mask: 0 [ 128.581] (II) modeset(0): Supported detailed timing: [ 128.581] (II) modeset(0): clock: 69.3 MHz Image Size: 344 x 193 mm [ 128.581] (II) modeset(0): h_active: 1366 h_sync: 1398 h_sync_end 1422 h_blank_end 1432 h_border: 0 [ 128.581] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 806 v_border: 0 [ 128.581] (II) modeset(0): Unknown vendor-specific block f [ 128.581] (II) modeset(0): AUO [ 128.581] (II) modeset(0): B156XW02 V2 [ 128.581] (II) modeset(0): EDID (in hex): [ 128.581] (II) modeset(0): 00ffffffffffff0006afec2200000000 [ 128.581] (II) modeset(0): 01130103802213780ac8959e57549226 [ 128.581] (II) modeset(0): 0f505400000001010101010101010101 [ 128.581] (II) modeset(0): 010101010101121b5642500026302018 [ 128.581] (II) modeset(0): 340058c1100000180000000f00000000 [ 128.581] (II) modeset(0): 00000000000000000020000000fe0041 [ 128.581] (II) modeset(0): 554f0a202020202020202020000000fe [ 128.581] (II) modeset(0): 004231353658573032205632200a00c0 [ 128.582] (II) modeset(0): Printing probed modes for output LVDS-1 [ 128.582] (II) modeset(0): Modeline "1366x768"x60.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 128.583] (II) modeset(0): Modeline "1280x720"x60.0 64.07 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.5 kHz d) [ 128.583] (II) modeset(0): Modeline "1024x768"x60.0 65.04 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 128.583] (II) modeset(0): Modeline "960x720"x60.0 117.08 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.1 kHz d) [ 128.583] (II) modeset(0): Modeline "928x696"x60.0 109.13 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.3 kHz d) [ 128.583] (II) modeset(0): Modeline "896x672"x60.0 102.45 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) [ 128.583] (II) modeset(0): Modeline "1024x576"x60.0 42.16 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.6 kHz d) [ 128.583] (II) modeset(0): Modeline "960x600"x60.0 77.06 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.1 kHz d) [ 128.583] (II) modeset(0): Modeline "960x540"x60.0 37.39 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.4 kHz d) [ 128.583] (II) modeset(0): Modeline "800x600"x60.0 38.43 800 824 896 1024 600 601 603 625 +hsync +vsync (37.5 kHz d) [ 128.583] (II) modeset(0): Modeline "840x525"x60.0 59.66 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.8 kHz d) [ 128.583] (II) modeset(0): Modeline "864x486"x60.0 30.74 864 912 944 1024 486 489 494 500 +hsync -vsync (30.0 kHz d) [ 128.583] (II) modeset(0): Modeline "700x525"x60.0 61.07 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (65.0 kHz d) [ 128.583] (II) modeset(0): Modeline "800x450"x60.0 48.93 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.6 kHz d) [ 128.583] (II) modeset(0): Modeline "640x512"x60.0 54.02 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 128.583] (II) modeset(0): Modeline "700x450"x60.0 43.37 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.6 kHz d) [ 128.583] (II) modeset(0): Modeline "640x480"x60.0 25.22 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 128.583] (II) modeset(0): Modeline "720x405"x60.0 22.14 720 768 800 880 405 408 413 419 +hsync -vsync (25.2 kHz d) [ 128.583] (II) modeset(0): Modeline "684x384"x60.0 36.24 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d) [ 128.583] (II) modeset(0): Modeline "640x360"x60.0 17.96 640 688 720 800 360 363 368 374 +hsync -vsync (22.5 kHz d) [ 128.583] (II) modeset(0): Modeline "512x384"x60.0 32.52 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 128.583] (II) modeset(0): Modeline "512x288"x60.0 21.04 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d) [ 128.583] (II) modeset(0): Modeline "480x270"x60.0 18.69 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.4 kHz d) [ 128.583] (II) modeset(0): Modeline "400x300"x60.0 19.18 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (37.5 kHz d) [ 128.583] (II) modeset(0): Modeline "432x243"x60.0 15.37 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (30.0 kHz d) [ 128.583] (II) modeset(0): Modeline "320x240"x60.0 12.58 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) [ 128.583] (II) modeset(0): Modeline "360x202"x60.0 11.04 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (25.1 kHz d) [ 128.583] (II) modeset(0): Modeline "320x180"x60.0 8.98 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.5 kHz d) [ 128.585] (II) modeset(0): EDID for output VGA-1 [ 128.586] (II) modeset(0): EDID for output HDMI-1 [ 128.586] (II) modeset(0): EDID for output DP-1 [ 128.586] (II) modeset(0): Output LVDS-1 connected [ 128.586] (II) modeset(0): Output VGA-1 disconnected [ 128.586] (II) modeset(0): Output HDMI-1 disconnected [ 128.586] (II) modeset(0): Output DP-1 disconnected [ 128.587] (II) modeset(0): Using exact sizes for initial modes [ 128.587] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0 [ 128.587] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 128.587] (==) modeset(0): DPI set to (96, 96) [ 128.587] (II) Loading sub module "fb" [ 128.587] (II) LoadModule: "fb" [ 128.587] (II) Module "fb" already built-in [ 128.587] (II) UnloadModule: "fbdev" [ 128.587] (II) Unloading fbdev [ 128.587] (II) UnloadSubModule: "fbdevhw" [ 128.587] (II) Unloading fbdevhw [ 128.587] (II) UnloadModule: "vesa" [ 128.587] (II) Unloading vesa [ 129.641] (==) modeset(0): Backing store enabled [ 129.641] (==) modeset(0): Silken mouse enabled [ 129.692] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc. [ 129.692] (==) modeset(0): DPMS enabled [ 129.693] (II) modeset(0): [DRI2] Setup complete [ 129.693] (II) modeset(0): [DRI2] DRI driver: crocus [ 129.693] (II) modeset(0): [DRI2] VDPAU driver: va_gl [ 129.693] (II) Initializing extension Generic Event Extension [ 129.693] (II) Initializing extension SHAPE [ 129.693] (II) Initializing extension MIT-SHM [ 129.694] (II) Initializing extension XInputExtension [ 129.695] (II) Initializing extension XTEST [ 129.695] (II) Initializing extension BIG-REQUESTS [ 129.696] (II) Initializing extension SYNC [ 129.696] (II) Initializing extension XKEYBOARD [ 129.696] (II) Initializing extension XC-MISC [ 129.697] (II) Initializing extension SECURITY [ 129.697] (II) Initializing extension XFIXES [ 129.698] (II) Initializing extension RENDER [ 129.698] (II) Initializing extension RANDR [ 129.699] (II) Initializing extension COMPOSITE [ 129.699] (II) Initializing extension DAMAGE [ 129.699] (II) Initializing extension MIT-SCREEN-SAVER [ 129.700] (II) Initializing extension DOUBLE-BUFFER [ 129.700] (II) Initializing extension RECORD [ 129.701] (II) Initializing extension DPMS [ 129.701] (II) Initializing extension Present [ 129.701] (II) Initializing extension DRI3 [ 129.702] (II) Initializing extension X-Resource [ 129.702] (II) Initializing extension XVideo [ 129.702] (II) Initializing extension XVideo-MotionCompensation [ 129.702] (II) Initializing extension SELinux [ 129.703] (II) SELinux: Disabled on system [ 129.703] (II) Initializing extension GLX [ 129.729] (II) AIGLX: Loaded and initialized crocus [ 129.729] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 129.729] (II) Initializing extension XFree86-VidModeExtension [ 129.730] (II) Initializing extension XFree86-DGA [ 129.730] (II) Initializing extension XFree86-DRI [ 129.730] (II) Initializing extension DRI2 [ 129.763] (II) modeset(0): Damage tracking initialized [ 129.763] (II) modeset(0): Setting screen physical size to 361 x 203 [ 131.106] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 131.106] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 131.106] (**) Power Button: Applying InputClass "system-keyboard" [ 131.106] (II) LoadModule: "libinput" [ 131.107] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 131.206] (II) Module libinput: vendor="X.Org Foundation" [ 131.206] compiled for 1.20.14, module version = 1.2.1 [ 131.206] Module class: X.Org XInput Driver [ 131.206] ABI class: X.Org XInput driver, version 24.1 [ 131.206] (II) Using input driver 'libinput' for 'Power Button' [ 131.206] (**) Power Button: always reports core events [ 131.206] (**) Option "Device" "/dev/input/event2" [ 131.275] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 131.276] (II) event2 - Power Button: device is a keyboard [ 131.276] (II) event2 - Power Button: device removed [ 131.304] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 131.304] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 131.304] (**) Option "xkb_model" "pc105" [ 131.304] (**) Option "xkb_layout" "es" [ 131.422] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 131.423] (II) event2 - Power Button: device is a keyboard [ 131.425] (II) config/udev: Adding input device Video Bus (/dev/input/event13) [ 131.425] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 131.425] (**) Video Bus: Applying InputClass "system-keyboard" [ 131.425] (II) Using input driver 'libinput' for 'Video Bus' [ 131.425] (**) Video Bus: always reports core events [ 131.425] (**) Option "Device" "/dev/input/event13" [ 131.428] (II) event13 - Video Bus: is tagged by udev as: Keyboard [ 131.428] (II) event13 - Video Bus: device is a keyboard [ 131.428] (II) event13 - Video Bus: device removed [ 131.452] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20/event13" [ 131.452] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 131.452] (**) Option "xkb_model" "pc105" [ 131.452] (**) Option "xkb_layout" "es" [ 131.456] (II) event13 - Video Bus: is tagged by udev as: Keyboard [ 131.456] (II) event13 - Video Bus: device is a keyboard [ 131.458] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 131.458] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 131.458] (**) Power Button: Applying InputClass "system-keyboard" [ 131.458] (II) Using input driver 'libinput' for 'Power Button' [ 131.458] (**) Power Button: always reports core events [ 131.458] (**) Option "Device" "/dev/input/event1" [ 131.461] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 131.461] (II) event1 - Power Button: device is a keyboard [ 131.461] (II) event1 - Power Button: device removed [ 131.476] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 131.476] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 131.476] (**) Option "xkb_model" "pc105" [ 131.476] (**) Option "xkb_layout" "es" [ 131.478] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 131.478] (II) event1 - Power Button: device is a keyboard [ 131.480] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 131.480] (II) No input driver specified, ignoring this device. [ 131.480] (II) This device may have been added with another device file. [ 131.484] (II) config/udev: Adding input device HP Webcam-101: HP Webcam-101 (/dev/input/event16) [ 131.484] (**) HP Webcam-101: HP Webcam-101: Applying InputClass "libinput keyboard catchall" [ 131.484] (**) HP Webcam-101: HP Webcam-101: Applying InputClass "system-keyboard" [ 131.484] (II) Using input driver 'libinput' for 'HP Webcam-101: HP Webcam-101' [ 131.485] (**) HP Webcam-101: HP Webcam-101: always reports core events [ 131.485] (**) Option "Device" "/dev/input/event16" [ 131.489] (II) event16 - HP Webcam-101: HP Webcam-101: is tagged by udev as: Keyboard [ 131.489] (II) event16 - HP Webcam-101: HP Webcam-101: device is a keyboard [ 131.490] (II) event16 - HP Webcam-101: HP Webcam-101: device removed [ 131.520] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input24/event16" [ 131.520] (II) XINPUT: Adding extended input device "HP Webcam-101: HP Webcam-101" (type: KEYBOARD, id 9) [ 131.520] (**) Option "xkb_model" "pc105" [ 131.520] (**) Option "xkb_layout" "es" [ 131.524] (II) event16 - HP Webcam-101: HP Webcam-101: is tagged by udev as: Keyboard [ 131.524] (II) event16 - HP Webcam-101: HP Webcam-101: device is a keyboard [ 131.526] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event17) [ 131.526] (II) No input driver specified, ignoring this device. [ 131.526] (II) This device may have been added with another device file. [ 131.527] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event18) [ 131.527] (II) No input driver specified, ignoring this device. [ 131.527] (II) This device may have been added with another device file. [ 131.528] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event19) [ 131.528] (II) No input driver specified, ignoring this device. [ 131.528] (II) This device may have been added with another device file. [ 131.529] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event4) [ 131.529] (**) 2.4G Mouse: Applying InputClass "libinput keyboard catchall" [ 131.529] (**) 2.4G Mouse: Applying InputClass "system-keyboard" [ 131.529] (II) Using input driver 'libinput' for '2.4G Mouse' [ 131.529] (**) 2.4G Mouse: always reports core events [ 131.529] (**) Option "Device" "/dev/input/event4" [ 131.532] (II) event4 - 2.4G Mouse: is tagged by udev as: Keyboard [ 131.532] (II) event4 - 2.4G Mouse: device is a keyboard [ 131.532] (II) event4 - 2.4G Mouse: device removed [ 131.572] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:1EA7:0066.0001/input/input10/event4" [ 131.572] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: KEYBOARD, id 10) [ 131.572] (**) Option "xkb_model" "pc105" [ 131.572] (**) Option "xkb_layout" "es" [ 131.575] (II) event4 - 2.4G Mouse: is tagged by udev as: Keyboard [ 131.575] (II) event4 - 2.4G Mouse: device is a keyboard [ 131.577] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event5) [ 131.577] (II) No input driver specified, ignoring this device. [ 131.577] (II) This device may have been added with another device file. [ 131.578] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/event6) [ 131.578] (**) 2.4G Mouse: Applying InputClass "libinput pointer catchall" [ 131.578] (II) Using input driver 'libinput' for '2.4G Mouse' [ 131.578] (**) 2.4G Mouse: always reports core events [ 131.578] (**) Option "Device" "/dev/input/event6" [ 131.581] (II) event6 - 2.4G Mouse: is tagged by udev as: Mouse [ 131.581] (II) event6 - 2.4G Mouse: device is a pointer [ 131.581] (II) event6 - 2.4G Mouse: device removed [ 131.624] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1EA7:0066.0002/input/input12/event6" [ 131.624] (II) XINPUT: Adding extended input device "2.4G Mouse" (type: MOUSE, id 11) [ 131.624] (**) Option "AccelerationScheme" "none" [ 131.624] (**) 2.4G Mouse: (accel) selected scheme none/0 [ 131.624] (**) 2.4G Mouse: (accel) acceleration factor: 2.000 [ 131.624] (**) 2.4G Mouse: (accel) acceleration threshold: 4 [ 131.627] (II) event6 - 2.4G Mouse: is tagged by udev as: Mouse [ 131.628] (II) event6 - 2.4G Mouse: device is a pointer [ 131.629] (II) config/udev: Adding input device 2.4G Mouse (/dev/input/mouse0) [ 131.629] (II) No input driver specified, ignoring this device. [ 131.629] (II) This device may have been added with another device file. [ 131.631] (II) config/udev: Adding input device 2.4G Mouse Consumer Control (/dev/input/event7) [ 131.631] (**) 2.4G Mouse Consumer Control: Applying InputClass "libinput keyboard catchall" [ 131.631] (**) 2.4G Mouse Consumer Control: Applying InputClass "system-keyboard" [ 131.631] (II) Using input driver 'libinput' for '2.4G Mouse Consumer Control' [ 131.631] (**) 2.4G Mouse Consumer Control: always reports core events [ 131.631] (**) Option "Device" "/dev/input/event7" [ 131.634] (II) event7 - 2.4G Mouse Consumer Control: is tagged by udev as: Keyboard [ 131.634] (II) event7 - 2.4G Mouse Consumer Control: device is a keyboard [ 131.635] (II) event7 - 2.4G Mouse Consumer Control: device removed [ 131.664] (II) libinput: 2.4G Mouse Consumer Control: needs a virtual subdevice [ 131.664] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1EA7:0066.0002/input/input13/event7" [ 131.664] (II) XINPUT: Adding extended input device "2.4G Mouse Consumer Control" (type: MOUSE, id 12) [ 131.664] (**) Option "AccelerationScheme" "none" [ 131.664] (**) 2.4G Mouse Consumer Control: (accel) selected scheme none/0 [ 131.664] (**) 2.4G Mouse Consumer Control: (accel) acceleration factor: 2.000 [ 131.664] (**) 2.4G Mouse Consumer Control: (accel) acceleration threshold: 4 [ 131.667] (II) event7 - 2.4G Mouse Consumer Control: is tagged by udev as: Keyboard [ 131.667] (II) event7 - 2.4G Mouse Consumer Control: device is a keyboard [ 131.669] (II) config/udev: Adding input device 2.4G Mouse System Control (/dev/input/event8) [ 131.669] (**) 2.4G Mouse System Control: Applying InputClass "libinput keyboard catchall" [ 131.669] (**) 2.4G Mouse System Control: Applying InputClass "system-keyboard" [ 131.670] (II) Using input driver 'libinput' for '2.4G Mouse System Control' [ 131.670] (**) 2.4G Mouse System Control: always reports core events [ 131.670] (**) Option "Device" "/dev/input/event8" [ 131.672] (II) event8 - 2.4G Mouse System Control: is tagged by udev as: Keyboard [ 131.673] (II) event8 - 2.4G Mouse System Control: device is a keyboard [ 131.673] (II) event8 - 2.4G Mouse System Control: device removed [ 131.688] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1EA7:0066.0002/input/input14/event8" [ 131.688] (II) XINPUT: Adding extended input device "2.4G Mouse System Control" (type: KEYBOARD, id 13) [ 131.688] (**) Option "xkb_model" "pc105" [ 131.688] (**) Option "xkb_layout" "es" [ 131.693] (II) event8 - 2.4G Mouse System Control: is tagged by udev as: Keyboard [ 131.694] (II) event8 - 2.4G Mouse System Control: device is a keyboard [ 131.697] (II) config/udev: Adding input device Barcode Reader (/dev/input/event9) [ 131.697] (**) Barcode Reader : Applying InputClass "libinput keyboard catchall" [ 131.697] (**) Barcode Reader : Applying InputClass "system-keyboard" [ 131.697] (II) Using input driver 'libinput' for 'Barcode Reader ' [ 131.697] (**) Barcode Reader : always reports core events [ 131.697] (**) Option "Device" "/dev/input/event9" [ 131.702] (II) event9 - Barcode Reader : is tagged by udev as: Keyboard [ 131.703] (II) event9 - Barcode Reader : device is a keyboard [ 131.703] (II) event9 - Barcode Reader : device removed [ 131.744] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:13BA:0018.0003/input/input16/event9" [ 131.744] (II) XINPUT: Adding extended input device "Barcode Reader " (type: KEYBOARD, id 14) [ 131.744] (**) Option "xkb_model" "pc105" [ 131.744] (**) Option "xkb_layout" "es" [ 131.749] (II) event9 - Barcode Reader : is tagged by udev as: Keyboard [ 131.749] (II) event9 - Barcode Reader : device is a keyboard [ 131.751] (II) config/udev: Adding input device Barcode Reader Mouse (/dev/input/event10) [ 131.751] (**) Barcode Reader Mouse: Applying InputClass "libinput pointer catchall" [ 131.751] (II) Using input driver 'libinput' for 'Barcode Reader Mouse' [ 131.751] (**) Barcode Reader Mouse: always reports core events [ 131.751] (**) Option "Device" "/dev/input/event10" [ 131.754] (II) event10 - Barcode Reader Mouse: is tagged by udev as: Mouse [ 131.755] (II) event10 - Barcode Reader Mouse: device is a pointer [ 131.755] (II) event10 - Barcode Reader Mouse: device removed [ 131.820] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:13BA:0018.0004/input/input17/event10" [ 131.820] (II) XINPUT: Adding extended input device "Barcode Reader Mouse" (type: MOUSE, id 15) [ 131.820] (**) Option "AccelerationScheme" "none" [ 131.820] (**) Barcode Reader Mouse: (accel) selected scheme none/0 [ 131.820] (**) Barcode Reader Mouse: (accel) acceleration factor: 2.000 [ 131.820] (**) Barcode Reader Mouse: (accel) acceleration threshold: 4 [ 131.823] (II) event10 - Barcode Reader Mouse: is tagged by udev as: Mouse [ 131.823] (II) event10 - Barcode Reader Mouse: device is a pointer [ 131.825] (II) config/udev: Adding input device Barcode Reader Mouse (/dev/input/mouse1) [ 131.825] (II) No input driver specified, ignoring this device. [ 131.825] (II) This device may have been added with another device file. [ 131.827] (II) config/udev: Adding input device Barcode Reader System Control (/dev/input/event11) [ 131.827] (**) Barcode Reader System Control: Applying InputClass "libinput keyboard catchall" [ 131.827] (**) Barcode Reader System Control: Applying InputClass "system-keyboard" [ 131.827] (II) Using input driver 'libinput' for 'Barcode Reader System Control' [ 131.827] (**) Barcode Reader System Control: always reports core events [ 131.827] (**) Option "Device" "/dev/input/event11" [ 131.830] (II) event11 - Barcode Reader System Control: is tagged by udev as: Keyboard [ 131.830] (II) event11 - Barcode Reader System Control: device is a keyboard [ 131.830] (II) event11 - Barcode Reader System Control: device removed [ 131.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:13BA:0018.0004/input/input18/event11" [ 131.852] (II) XINPUT: Adding extended input device "Barcode Reader System Control" (type: KEYBOARD, id 16) [ 131.852] (**) Option "xkb_model" "pc105" [ 131.852] (**) Option "xkb_layout" "es" [ 131.855] (II) event11 - Barcode Reader System Control: is tagged by udev as: Keyboard [ 131.855] (II) event11 - Barcode Reader System Control: device is a keyboard [ 131.857] (II) config/udev: Adding input device Barcode Reader Consumer Control (/dev/input/event12) [ 131.857] (**) Barcode Reader Consumer Control: Applying InputClass "libinput keyboard catchall" [ 131.857] (**) Barcode Reader Consumer Control: Applying InputClass "system-keyboard" [ 131.857] (II) Using input driver 'libinput' for 'Barcode Reader Consumer Control' [ 131.857] (**) Barcode Reader Consumer Control: always reports core events [ 131.857] (**) Option "Device" "/dev/input/event12" [ 131.859] (II) event12 - Barcode Reader Consumer Control: is tagged by udev as: Keyboard [ 131.859] (II) event12 - Barcode Reader Consumer Control: device is a keyboard [ 131.860] (II) event12 - Barcode Reader Consumer Control: device removed [ 131.896] (II) libinput: Barcode Reader Consumer Control: needs a virtual subdevice [ 131.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:13BA:0018.0004/input/input19/event12" [ 131.896] (II) XINPUT: Adding extended input device "Barcode Reader Consumer Control" (type: MOUSE, id 17) [ 131.896] (**) Option "AccelerationScheme" "none" [ 131.896] (**) Barcode Reader Consumer Control: (accel) selected scheme none/0 [ 131.896] (**) Barcode Reader Consumer Control: (accel) acceleration factor: 2.000 [ 131.896] (**) Barcode Reader Consumer Control: (accel) acceleration threshold: 4 [ 131.898] (II) event12 - Barcode Reader Consumer Control: is tagged by udev as: Keyboard [ 131.898] (II) event12 - Barcode Reader Consumer Control: device is a keyboard [ 131.899] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 131.900] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 131.900] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard" [ 131.900] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 131.900] (**) AT Translated Set 2 keyboard: always reports core events [ 131.900] (**) Option "Device" "/dev/input/event3" [ 131.901] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 131.901] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 131.903] (II) event3 - AT Translated Set 2 keyboard: device removed [ 131.940] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" [ 131.940] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18) [ 131.940] (**) Option "xkb_model" "pc105" [ 131.940] (**) Option "xkb_layout" "es" [ 131.942] (II) event3 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard [ 131.942] (II) event3 - AT Translated Set 2 keyboard: device is a keyboard [ 131.945] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14) [ 131.945] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall" [ 131.945] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad' [ 131.945] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 131.945] (**) Option "Device" "/dev/input/event14" [ 131.947] (II) event14 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 131.949] (II) event14 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 131.949] (II) event14 - SynPS/2 Synaptics TouchPad: device removed [ 132.000] (**) Option "Tapping" "on" [ 132.000] (**) Option "NaturalScrolling" "on" [ 132.001] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input9/event14" [ 132.001] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 19) [ 132.002] (**) Option "AccelerationScheme" "none" [ 132.002] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0 [ 132.002] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 132.002] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 132.004] (II) event14 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad [ 132.007] (II) event14 - SynPS/2 Synaptics TouchPad: device is a touchpad [ 132.008] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2) [ 132.008] (II) No input driver specified, ignoring this device. [ 132.009] (II) This device may have been added with another device file. [ 132.015] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event15) [ 132.015] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 132.015] (**) HP WMI hotkeys: Applying InputClass "system-keyboard" [ 132.015] (II) Using input driver 'libinput' for 'HP WMI hotkeys' [ 132.015] (**) HP WMI hotkeys: always reports core events [ 132.015] (**) Option "Device" "/dev/input/event15" [ 132.016] (II) event15 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 132.017] (II) event15 - HP WMI hotkeys: device is a keyboard [ 132.017] (II) event15 - HP WMI hotkeys: device removed [ 132.052] (**) Option "config_info" "udev:/sys/devices/virtual/input/input23/event15" [ 132.052] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 20) [ 132.052] (**) Option "xkb_model" "pc105" [ 132.052] (**) Option "xkb_layout" "es" [ 132.053] (II) event15 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch [ 132.054] (II) event15 - HP WMI hotkeys: device is a keyboard [ 132.073] (**) 2.4G Mouse Consumer Control: Applying InputClass "libinput keyboard catchall" [ 132.074] (**) 2.4G Mouse Consumer Control: Applying InputClass "system-keyboard" [ 132.074] (II) Using input driver 'libinput' for '2.4G Mouse Consumer Control' [ 132.074] (**) 2.4G Mouse Consumer Control: always reports core events [ 132.074] (**) Option "Device" "/dev/input/event7" [ 132.074] (II) libinput: 2.4G Mouse Consumer Control: is a virtual subdevice [ 132.074] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:1EA7:0066.0002/input/input13/event7" [ 132.074] (II) XINPUT: Adding extended input device "2.4G Mouse Consumer Control" (type: KEYBOARD, id 21) [ 132.074] (**) Option "xkb_model" "pc105" [ 132.074] (**) Option "xkb_layout" "es" [ 132.075] (**) Barcode Reader Consumer Control: Applying InputClass "libinput keyboard catchall" [ 132.075] (**) Barcode Reader Consumer Control: Applying InputClass "system-keyboard" [ 132.075] (II) Using input driver 'libinput' for 'Barcode Reader Consumer Control' [ 132.075] (**) Barcode Reader Consumer Control: always reports core events [ 132.075] (**) Option "Device" "/dev/input/event12" [ 132.075] (II) libinput: Barcode Reader Consumer Control: is a virtual subdevice [ 132.075] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:13BA:0018.0004/input/input19/event12" [ 132.075] (II) XINPUT: Adding extended input device "Barcode Reader Consumer Control" (type: KEYBOARD, id 22) [ 132.075] (**) Option "xkb_model" "pc105" [ 132.075] (**) Option "xkb_layout" "es" [ 160.406] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 160.406] (II) modeset(0): Printing DDC gathered Modelines: [ 160.406] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 184.154] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 184.154] (II) modeset(0): Printing DDC gathered Modelines: [ 184.154] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 741.342] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 741.367] (II) modeset(0): Printing DDC gathered Modelines: [ 741.367] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 741.375] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 741.375] (II) modeset(0): Printing DDC gathered Modelines: [ 741.375] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 876.459] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 876.459] (II) modeset(0): Printing DDC gathered Modelines: [ 876.459] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 876.903] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 876.903] (II) modeset(0): Printing DDC gathered Modelines: [ 876.903] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 959.520] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 959.520] (II) modeset(0): Printing DDC gathered Modelines: [ 959.520] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 959.560] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 959.560] (II) modeset(0): Printing DDC gathered Modelines: [ 959.560] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 1409.932] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 1409.932] (II) modeset(0): Printing DDC gathered Modelines: [ 1409.932] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 1449.069] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 1449.069] (II) modeset(0): Printing DDC gathered Modelines: [ 1449.069] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 1491.568] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 1491.568] (II) modeset(0): Printing DDC gathered Modelines: [ 1491.568] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 1491.690] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 1491.690] (II) modeset(0): Printing DDC gathered Modelines: [ 1491.690] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 1547.015] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 1547.015] (II) modeset(0): Printing DDC gathered Modelines: [ 1547.015] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 1547.323] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 1547.323] (II) modeset(0): Printing DDC gathered Modelines: [ 1547.323] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 1912.287] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 1912.287] (II) modeset(0): Printing DDC gathered Modelines: [ 1912.287] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 1913.073] (II) modeset(0): Allocate new frame buffer 2390x768 stride [ 2378.978] (EE) event6 - 2.4G Mouse: client bug: event processing lagging behind by 22ms, your system is too slow [ 2597.282] (II) modeset(0): Allocate new frame buffer 2166x768 stride [ 2608.825] (II) modeset(0): Allocate new frame buffer 2390x768 stride [ 2632.522] (II) Axis 0 value 1133 is outside expected range [1251, 6108] See https://wayland.freedesktop.org/libinput/doc/1.20.0/absolute_coordinate_ranges.html for details [ 2639.034] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 2639.034] (II) modeset(0): Printing DDC gathered Modelines: [ 2639.034] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 2639.857] (II) modeset(0): Allocate new frame buffer 1366x768 stride [ 2644.217] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 2644.217] (II) modeset(0): Printing DDC gathered Modelines: [ 2644.217] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 2644.954] (II) modeset(0): Allocate new frame buffer 2390x768 stride [ 2654.904] (EE) event6 - 2.4G Mouse: client bug: event processing lagging behind by 26ms, your system is too slow [ 2849.175] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 2849.200] (II) modeset(0): Printing DDC gathered Modelines: [ 2849.200] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 2872.809] (II) modeset(0): Allocate new frame buffer 1366x768 stride [ 2920.356] (II) modeset(0): Allocate new frame buffer 1024x768 stride [ 2932.512] (II) modeset(0): Allocate new frame buffer 1366x768 stride [ 2972.811] (II) modeset(0): Allocate new frame buffer 1024x768 stride [ 2979.264] (II) modeset(0): Allocate new frame buffer 1366x768 stride [ 3573.029] (EE) event6 - 2.4G Mouse: client bug: event processing lagging behind by 27ms, your system is too slow [ 3640.926] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 3640.926] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 3642.576] (II) modeset(0): Using hsync ranges from config file [ 3642.576] (II) modeset(0): Using vrefresh ranges from config file [ 3642.577] (II) modeset(0): Printing DDC gathered Modelines: [ 3642.577] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 3642.577] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 3642.577] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 3642.577] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 3642.577] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 3642.577] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 3642.610] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 3642.610] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 3642.610] (II) modeset(0): Using hsync ranges from config file [ 3642.610] (II) modeset(0): Using vrefresh ranges from config file [ 3642.610] (II) modeset(0): Printing DDC gathered Modelines: [ 3642.610] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 3642.610] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 3642.610] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 3642.610] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 3642.610] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 3642.610] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 3783.302] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 3783.303] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 3783.303] (II) modeset(0): Using hsync ranges from config file [ 3783.303] (II) modeset(0): Using vrefresh ranges from config file [ 3783.303] (II) modeset(0): Printing DDC gathered Modelines: [ 3783.303] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 3783.303] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 3783.303] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 3783.303] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 3783.303] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 3783.303] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 3783.437] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 3783.437] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 3783.437] (II) modeset(0): Using hsync ranges from config file [ 3783.437] (II) modeset(0): Using vrefresh ranges from config file [ 3783.437] (II) modeset(0): Printing DDC gathered Modelines: [ 3783.437] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 3783.437] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 3783.437] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 3783.437] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 3783.437] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 3783.437] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 4004.402] (EE) event6 - 2.4G Mouse: client bug: event processing lagging behind by 33ms, your system is too slow [ 4134.695] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 4134.695] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 4134.695] (II) modeset(0): Using hsync ranges from config file [ 4134.695] (II) modeset(0): Using vrefresh ranges from config file [ 4134.695] (II) modeset(0): Printing DDC gathered Modelines: [ 4134.695] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 4134.695] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 4134.695] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 4134.695] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 4134.695] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 4134.695] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 4134.734] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 4134.734] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 4134.734] (II) modeset(0): Using hsync ranges from config file [ 4134.734] (II) modeset(0): Using vrefresh ranges from config file [ 4134.734] (II) modeset(0): Printing DDC gathered Modelines: [ 4134.734] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 4134.734] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 4134.734] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 4134.734] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 4134.734] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 4134.734] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 4738.156] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 4742.313] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 4742.313] (II) modeset(0): Using hsync ranges from config file [ 4742.313] (II) modeset(0): Using vrefresh ranges from config file [ 4742.313] (II) modeset(0): Printing DDC gathered Modelines: [ 4742.313] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 4742.313] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 4742.313] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 4742.313] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 4742.313] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 4742.313] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 4742.350] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 4742.350] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 4742.350] (II) modeset(0): Using hsync ranges from config file [ 4742.350] (II) modeset(0): Using vrefresh ranges from config file [ 4742.350] (II) modeset(0): Printing DDC gathered Modelines: [ 4742.350] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 4742.350] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 4742.350] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 4742.350] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 4742.350] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 4742.350] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 5380.456] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 5380.501] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 5380.541] (II) modeset(0): Using hsync ranges from config file [ 5380.541] (II) modeset(0): Using vrefresh ranges from config file [ 5380.541] (II) modeset(0): Printing DDC gathered Modelines: [ 5380.541] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 5380.541] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 5380.541] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 5380.541] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 5380.541] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 5380.541] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 5380.575] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 5380.575] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 5380.575] (II) modeset(0): Using hsync ranges from config file [ 5380.575] (II) modeset(0): Using vrefresh ranges from config file [ 5380.575] (II) modeset(0): Printing DDC gathered Modelines: [ 5380.575] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 5380.575] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 5380.575] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 5380.575] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 5380.575] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 5380.575] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 5418.851] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 5418.851] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 5418.851] (II) modeset(0): Using hsync ranges from config file [ 5418.851] (II) modeset(0): Using vrefresh ranges from config file [ 5418.851] (II) modeset(0): Printing DDC gathered Modelines: [ 5418.851] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 5418.851] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 5418.851] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 5418.851] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 5418.851] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 5418.851] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 5418.979] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 5418.979] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 5418.979] (II) modeset(0): Using hsync ranges from config file [ 5418.979] (II) modeset(0): Using vrefresh ranges from config file [ 5418.979] (II) modeset(0): Printing DDC gathered Modelines: [ 5418.980] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 5418.980] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 5418.980] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 5418.980] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 5418.980] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 5418.980] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 5721.759] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 5721.760] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 5721.760] (II) modeset(0): Using hsync ranges from config file [ 5721.760] (II) modeset(0): Using vrefresh ranges from config file [ 5721.760] (II) modeset(0): Printing DDC gathered Modelines: [ 5721.760] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 5721.760] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 5721.760] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 5721.760] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 5721.760] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 5721.760] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 5721.792] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 5721.792] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 5721.792] (II) modeset(0): Using hsync ranges from config file [ 5721.792] (II) modeset(0): Using vrefresh ranges from config file [ 5721.792] (II) modeset(0): Printing DDC gathered Modelines: [ 5721.792] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 5721.792] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 5721.792] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 5721.792] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 5721.792] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 5721.792] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 5845.572] (II) modeset(0): Allocate new frame buffer 1024x768 stride [ 5873.135] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 5873.135] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 5873.135] (II) modeset(0): Using hsync ranges from config file [ 5873.135] (II) modeset(0): Using vrefresh ranges from config file [ 5873.135] (II) modeset(0): Printing DDC gathered Modelines: [ 5873.135] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 5873.135] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 5873.135] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 5873.135] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 5873.136] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 5873.136] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 5873.268] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 5873.268] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 5873.268] (II) modeset(0): Using hsync ranges from config file [ 5873.268] (II) modeset(0): Using vrefresh ranges from config file [ 5873.268] (II) modeset(0): Printing DDC gathered Modelines: [ 5873.268] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 5873.268] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 5873.268] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 5873.268] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 5873.268] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 5873.268] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 6986.294] (II) modeset(0): Allocate new frame buffer 1366x768 stride [ 6986.508] (EE) event14 - SynPS/2 Synaptics TouchPad: client bug: event processing lagging behind by 171ms, your system is too slow [ 6991.978] (II) Axis 0x1 value 5019 is outside expected range [1236, 5015] See https://wayland.freedesktop.org/libinput/doc/1.20.0/absolute_coordinate_ranges.html for details [ 6999.303] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 6999.303] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 6999.303] (II) modeset(0): Using hsync ranges from config file [ 6999.303] (II) modeset(0): Using vrefresh ranges from config file [ 6999.303] (II) modeset(0): Printing DDC gathered Modelines: [ 6999.303] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 6999.303] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 6999.303] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 6999.303] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 6999.303] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 6999.303] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 7000.420] (II) modeset(0): Allocate new frame buffer 1024x768 stride [ 7392.626] (II) modeset(0): EDID vendor "AUO", prod id 8940 [ 7392.627] (II) modeset(0): Printing DDC gathered Modelines: [ 7392.627] (II) modeset(0): Modeline "1366x768"x0.0 69.30 1366 1398 1422 1432 768 771 775 806 -hsync -vsync (48.4 kHz eP) [ 7392.729] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 7392.729] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 7392.729] (II) modeset(0): Using hsync ranges from config file [ 7392.729] (II) modeset(0): Using vrefresh ranges from config file [ 7392.729] (II) modeset(0): Printing DDC gathered Modelines: [ 7392.729] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 7392.729] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 7392.729] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 7392.729] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 7392.729] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 7392.729] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 8095.763] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 8095.764] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 8095.764] (II) modeset(0): Using hsync ranges from config file [ 8095.764] (II) modeset(0): Using vrefresh ranges from config file [ 8095.764] (II) modeset(0): Printing DDC gathered Modelines: [ 8095.764] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 8095.764] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 8095.764] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 8095.764] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 8095.764] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 8095.764] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 8095.807] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 8095.807] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 8095.807] (II) modeset(0): Using hsync ranges from config file [ 8095.807] (II) modeset(0): Using vrefresh ranges from config file [ 8095.807] (II) modeset(0): Printing DDC gathered Modelines: [ 8095.807] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 8095.807] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 8095.807] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 8095.807] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 8095.807] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 8095.807] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 8355.681] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 8355.681] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 8355.681] (II) modeset(0): Using hsync ranges from config file [ 8355.681] (II) modeset(0): Using vrefresh ranges from config file [ 8355.681] (II) modeset(0): Printing DDC gathered Modelines: [ 8355.681] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 8355.681] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 8355.681] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 8355.681] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 8355.681] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 8355.681] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 8355.887] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 8355.888] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 8355.888] (II) modeset(0): Using hsync ranges from config file [ 8355.888] (II) modeset(0): Using vrefresh ranges from config file [ 8355.888] (II) modeset(0): Printing DDC gathered Modelines: [ 8355.888] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 8355.888] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 8355.888] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 8355.888] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 8355.888] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 8355.888] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 8806.713] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 8811.888] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 8811.888] (II) modeset(0): Using hsync ranges from config file [ 8811.888] (II) modeset(0): Using vrefresh ranges from config file [ 8811.888] (II) modeset(0): Printing DDC gathered Modelines: [ 8811.888] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 8811.888] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 8811.888] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 8811.888] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 8811.888] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 8811.888] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 8811.921] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 8811.921] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 8811.921] (II) modeset(0): Using hsync ranges from config file [ 8811.921] (II) modeset(0): Using vrefresh ranges from config file [ 8811.921] (II) modeset(0): Printing DDC gathered Modelines: [ 8811.921] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 8811.921] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 8811.921] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 8811.921] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 8811.921] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 8811.922] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 9035.171] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 9036.827] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 9036.828] (II) modeset(0): Using hsync ranges from config file [ 9036.828] (II) modeset(0): Using vrefresh ranges from config file [ 9036.828] (II) modeset(0): Printing DDC gathered Modelines: [ 9036.828] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 9036.828] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 9036.828] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 9036.828] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 9036.828] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 9036.828] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 9036.878] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 9036.878] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 9036.878] (II) modeset(0): Using hsync ranges from config file [ 9036.878] (II) modeset(0): Using vrefresh ranges from config file [ 9036.878] (II) modeset(0): Printing DDC gathered Modelines: [ 9036.878] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 9036.878] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 9036.878] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 9036.878] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 9036.878] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 9036.878] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 9425.937] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 9425.937] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 9425.937] (II) modeset(0): Using hsync ranges from config file [ 9425.937] (II) modeset(0): Using vrefresh ranges from config file [ 9425.937] (II) modeset(0): Printing DDC gathered Modelines: [ 9425.937] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 9425.937] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 9425.937] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 9425.937] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 9425.937] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 9425.937] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 9425.970] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 9425.970] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 9425.970] (II) modeset(0): Using hsync ranges from config file [ 9425.970] (II) modeset(0): Using vrefresh ranges from config file [ 9425.970] (II) modeset(0): Printing DDC gathered Modelines: [ 9425.970] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 9425.970] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 9425.970] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 9425.970] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 9425.970] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 9425.970] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 11007.036] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 11007.036] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 11007.037] (II) modeset(0): Using hsync ranges from config file [ 11007.037] (II) modeset(0): Using vrefresh ranges from config file [ 11007.037] (II) modeset(0): Printing DDC gathered Modelines: [ 11007.037] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 11007.037] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 11007.037] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 11007.037] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 11007.037] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 11007.037] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 11007.070] (II) modeset(0): EDID vendor "GSM", prod id 1 [ 11007.070] (II) modeset(0): DDCModeFromDetailedTiming: 800x600 Warning: We only handle separate sync. [ 11007.070] (II) modeset(0): Using hsync ranges from config file [ 11007.070] (II) modeset(0): Using vrefresh ranges from config file [ 11007.070] (II) modeset(0): Printing DDC gathered Modelines: [ 11007.070] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync +vsync (48.4 kHz eP) [ 11007.070] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 602 628 -hsync -vsync (37.9 kHz e) [ 11007.070] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 11007.070] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 11007.070] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 11007.070] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)