[ 9.226] (--) Log file renamed from "/var/log/Xorg.pid-2783.log" to "/var/log/Xorg.0.log" [ 9.226] X.Org X Server 1.21.1.16 X Protocol Version 11, Revision 0 [ 9.226] Current Operating System: Linux XXX 6.14.6-zen1-1-zen #1 ZEN SMP PREEMPT_DYNAMIC Fri, 09 May 2025 17:35:59 +0000 x86_64 [ 9.226] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=HASH_0DA-0546-EE7B-EF00-4535033BC954 rw rootflags=subvol=@ quiet loglevel=3 ibt=off [ 9.226] [ 9.227] Current version of pixman: 0.46.0 [ 9.227] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 9.227] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 9.227] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 28 13:03:27 2025 [ 9.227] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 9.227] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 9.227] (==) No Layout section. Using the first Screen section. [ 9.227] (==) No screen section available. Using defaults. [ 9.227] (**) |-->Screen "Default Screen Section" (0) [ 9.227] (**) | |-->Monitor "<default monitor>" [ 9.227] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 9.227] (**) Allowing byte-swapped clients [ 9.227] (==) Automatically adding devices [ 9.227] (==) Automatically enabling devices [ 9.227] (==) Automatically adding GPU devices [ 9.227] (==) Automatically binding GPU devices [ 9.227] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 9.228] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc". [ 9.228] Entry deleted from font path. [ 9.228] (Run 'mkfontdir' on "/usr/share/fonts/misc"). [ 9.228] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 9.228] Entry deleted from font path. [ 9.228] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 9.228] (WW) The directory "/usr/share/fonts/OTF" does not exist. [ 9.228] Entry deleted from font path. [ 9.228] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 9.228] Entry deleted from font path. [ 9.228] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 9.228] Entry deleted from font path. [ 9.228] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 9.228] Entry deleted from font path. [ 9.228] (==) FontPath set to: [ 9.228] (==) ModulePath set to "/usr/lib/xorg/modules" [ 9.228] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 9.228] (II) Module ABI versions: [ 9.228] X.Org ANSI C Emulation: 0.4 [ 9.228] X.Org Video Driver: 25.2 [ 9.228] X.Org XInput driver : 24.4 [ 9.228] X.Org Server Extension : 10.0 [ 9.228] (++) using VT number 2 [ 9.228] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 9.229] (II) xfree86: Adding drm device (/dev/dri/card1) [ 9.229] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/drm/card1 [ 9.239] (II) xfree86: Adding drm device (/dev/dri/card0) [ 9.239] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:0f:00.0/drm/card0 [ 9.242] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules" [ 9.244] (--) PCI:*(1@0:0:0) 10de:24c7:1043:8912 rev 161, Mem @ 0xf5000000/16777216, 0xfcc0000000/268435456, 0xfcd0000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288 [ 9.244] (--) PCI: (15@0:0:0) 1002:164e:1849:364e rev 198, Mem @ 0xfce0000000/268435456, 0xfcf0000000/2097152, 0xf6a00000/524288, I/O @ 0x0000d000/256 [ 9.244] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 9.244] (II) LoadModule: "glx" [ 9.244] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 9.245] (II) Module glx: vendor="X.Org Foundation" [ 9.245] compiled for 1.21.1.16, module version = 1.0.0 [ 9.245] ABI class: X.Org Server Extension, version 10.0 [ 9.245] (II) Applying OutputClass "nvidia" to /dev/dri/card1 [ 9.245] loading driver: nvidia [ 9.245] (II) Applying OutputClass "AMDgpu" to /dev/dri/card0 [ 9.245] loading driver: amdgpu [ 9.245] (==) Matched nvidia as autoconfigured driver 0 [ 9.245] (==) Matched nouveau as autoconfigured driver 1 [ 9.245] (==) Matched nv as autoconfigured driver 2 [ 9.245] (==) Matched amdgpu as autoconfigured driver 3 [ 9.245] (==) Matched ati as autoconfigured driver 4 [ 9.245] (==) Matched modesetting as autoconfigured driver 5 [ 9.245] (==) Matched fbdev as autoconfigured driver 6 [ 9.245] (==) Matched vesa as autoconfigured driver 7 [ 9.245] (==) Assigned the driver to the xf86ConfigLayout [ 9.245] (II) LoadModule: "nvidia" [ 9.245] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 9.247] (II) Module nvidia: vendor="NVIDIA Corporation" [ 9.247] compiled for 1.6.99.901, module version = 1.0.0 [ 9.247] Module class: X.Org Video Driver [ 9.247] (II) LoadModule: "nouveau" [ 9.247] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 9.249] (II) Module nouveau: vendor="X.Org Foundation" [ 9.249] compiled for 1.21.1.14, module version = 1.0.18 [ 9.249] Module class: X.Org Video Driver [ 9.249] ABI class: X.Org Video Driver, version 25.2 [ 9.249] (II) LoadModule: "nv" [ 9.249] (WW) Warning, couldn't open module nv [ 9.249] (EE) Failed to load module "nv" (module does not exist, 0) [ 9.249] (II) LoadModule: "amdgpu" [ 9.249] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so [ 9.250] (II) Module amdgpu: vendor="X.Org Foundation" [ 9.250] compiled for 1.21.1.11, module version = 23.0.0 [ 9.250] Module class: X.Org Video Driver [ 9.250] ABI class: X.Org Video Driver, version 25.2 [ 9.250] (II) LoadModule: "ati" [ 9.250] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 9.250] (II) Module ati: vendor="X.Org Foundation" [ 9.250] compiled for 1.21.1.11, module version = 22.0.0 [ 9.250] Module class: X.Org Video Driver [ 9.250] ABI class: X.Org Video Driver, version 25.2 [ 9.250] (II) LoadModule: "modesetting" [ 9.250] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 9.250] (II) Module modesetting: vendor="X.Org Foundation" [ 9.250] compiled for 1.21.1.16, module version = 1.21.1 [ 9.250] Module class: X.Org Video Driver [ 9.250] ABI class: X.Org Video Driver, version 25.2 [ 9.250] (II) LoadModule: "fbdev" [ 9.250] (WW) Warning, couldn't open module fbdev [ 9.250] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 9.250] (II) LoadModule: "vesa" [ 9.251] (WW) Warning, couldn't open module vesa [ 9.251] (EE) Failed to load module "vesa" (module does not exist, 0) [ 9.251] (II) NVIDIA dlloader X Driver 570.144 Thu Apr 10 20:05:34 UTC 2025 [ 9.251] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 9.251] (II) NOUVEAU driver [ 9.251] (II) NOUVEAU driver for NVIDIA chipset families : [ 9.251] RIVA TNT (NV04) [ 9.251] RIVA TNT2 (NV05) [ 9.251] GeForce 256 (NV10) [ 9.251] GeForce 2 (NV11, NV15) [ 9.251] GeForce 4MX (NV17, NV18) [ 9.251] GeForce 3 (NV20) [ 9.251] GeForce 4Ti (NV25, NV28) [ 9.251] GeForce FX (NV3x) [ 9.251] GeForce 6 (NV4x) [ 9.251] GeForce 7 (G7x) [ 9.251] GeForce 8 (G8x) [ 9.251] GeForce 9 (G9x) [ 9.251] GeForce GTX 2xx/3xx (GT2xx) [ 9.251] GeForce GTX 4xx/5xx (GFxxx) [ 9.251] GeForce GTX 6xx/7xx (GKxxx) [ 9.251] GeForce GTX 9xx (GMxxx) [ 9.251] GeForce GTX 10xx (GPxxx) [ 9.251] (II) AMDGPU: Driver for AMD Radeon: All GPUs supported by the amdgpu kernel driver [ 9.251] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 9.258] (II) Loading sub module "fb" [ 9.258] (II) LoadModule: "fb" [ 9.258] (II) Module "fb" already built-in [ 9.258] (II) Loading sub module "wfb" [ 9.258] (II) LoadModule: "wfb" [ 9.258] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 9.258] (II) Module wfb: vendor="X.Org Foundation" [ 9.258] compiled for 1.21.1.16, module version = 1.0.0 [ 9.258] ABI class: X.Org ANSI C Emulation, version 0.4 [ 9.258] (WW) Falling back to old probe method for modesetting [ 9.261] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 9.261] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 9.261] (==) NVIDIA(0): RGB weight 888 [ 9.261] (==) NVIDIA(0): Default visual is TrueColor [ 9.261] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 9.261] (II) Applying OutputClass "nvidia" options to /dev/dri/card1 [ 9.261] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" [ 9.261] (**) NVIDIA(0): Enabling 2D acceleration [ 9.261] (II) Loading sub module "glxserver_nvidia" [ 9.261] (II) LoadModule: "glxserver_nvidia" [ 9.261] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so [ 9.311] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation" [ 9.311] compiled for 1.6.99.901, module version = 1.0.0 [ 9.311] Module class: X.Org Server Extension [ 9.311] (II) NVIDIA GLX Module 570.144 Thu Apr 10 20:06:53 UTC 2025 [ 9.311] (II) NVIDIA: The X server supports PRIME Render Offload. [ 9.313] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0 [ 9.313] (--) NVIDIA(0): DFP-0 [ 9.313] (--) NVIDIA(0): DFP-1 (boot) [ 9.313] (--) NVIDIA(0): DFP-2 [ 9.314] (--) NVIDIA(0): DFP-3 [ 9.314] (--) NVIDIA(0): DFP-4 [ 9.314] (--) NVIDIA(0): DFP-5 [ 9.314] (--) NVIDIA(0): DFP-6 [ 9.328] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3060 (GA104-B) at PCI:1:0:0 [ 9.328] (II) NVIDIA(0): (GPU-0) [ 9.328] (--) NVIDIA(0): Memory: 8388608 kBytes [ 9.328] (--) NVIDIA(0): VideoBIOS: 94.04.99.00.46 [ 9.328] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 9.500] (--) NVIDIA(GPU-0): Samsung C27F390 (DFP-0): connected [ 9.500] (--) NVIDIA(GPU-0): Samsung C27F390 (DFP-0): Internal TMDS [ 9.500] (--) NVIDIA(GPU-0): Samsung C27F390 (DFP-0): 600.0 MHz maximum pixel clock [ 9.500] (--) NVIDIA(GPU-0): [ 9.500] (--) NVIDIA(GPU-0): DELL S3222DGM (DFP-1): connected [ 9.500] (--) NVIDIA(GPU-0): DELL S3222DGM (DFP-1): Internal DisplayPort [ 9.500] (--) NVIDIA(GPU-0): DELL S3222DGM (DFP-1): 2670.0 MHz maximum pixel clock [ 9.500] (--) NVIDIA(GPU-0): [ 9.505] (--) NVIDIA(GPU-0): DFP-2: disconnected [ 9.505] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS [ 9.505] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock [ 9.505] (--) NVIDIA(GPU-0): [ 9.506] (--) NVIDIA(GPU-0): DFP-3: disconnected [ 9.506] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort [ 9.506] (--) NVIDIA(GPU-0): DFP-3: 2670.0 MHz maximum pixel clock [ 9.506] (--) NVIDIA(GPU-0): [ 9.506] (--) NVIDIA(GPU-0): DFP-4: disconnected [ 9.506] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS [ 9.506] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock [ 9.506] (--) NVIDIA(GPU-0): [ 9.506] (--) NVIDIA(GPU-0): DFP-5: disconnected [ 9.506] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort [ 9.506] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock [ 9.506] (--) NVIDIA(GPU-0): [ 9.506] (--) NVIDIA(GPU-0): DFP-6: disconnected [ 9.506] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS [ 9.506] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock [ 9.506] (--) NVIDIA(GPU-0): [ 9.558] (==) NVIDIA(0): [ 9.558] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 9.558] (==) NVIDIA(0): will be used as the requested mode. [ 9.558] (==) NVIDIA(0): [ 9.561] (II) NVIDIA(0): Validated MetaModes: [ 9.561] (II) NVIDIA(0): "DFP-1:nvidia-auto-select,DFP-0:nvidia-auto-select" [ 9.561] (II) NVIDIA(0): Virtual screen size determined to be 4480 x 1440 [ 9.724] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config [ 9.724] (--) NVIDIA(0): option [ 9.724] (==) AMDGPU(G0): Depth 24, (--) framebuffer bpp 32 [ 9.724] (II) AMDGPU(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 9.724] (==) AMDGPU(G0): Default visual is TrueColor [ 9.724] (II) Applying OutputClass "AMDgpu" options to /dev/dri/card0 [ 9.724] (==) AMDGPU(G0): RGB weight 888 [ 9.724] (II) AMDGPU(G0): Using 8 bits per RGB (8 bit DAC) [ 9.724] (--) AMDGPU(G0): Chipset: "AMD Radeon Graphics" (ChipID = 0x164e) [ 9.724] (II) Loading sub module "fb" [ 9.724] (II) LoadModule: "fb" [ 9.724] (II) Module "fb" already built-in [ 9.724] (II) Loading sub module "dri2" [ 9.724] (II) LoadModule: "dri2" [ 9.724] (II) Module "dri2" already built-in [ 9.805] (II) Loading sub module "glamoregl" [ 9.805] (II) LoadModule: "glamoregl" [ 9.805] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 9.807] (II) Module glamoregl: vendor="X.Org Foundation" [ 9.807] compiled for 1.21.1.16, module version = 1.0.1 [ 9.807] ABI class: X.Org ANSI C Emulation, version 0.4 [ 9.826] (II) AMDGPU(G0): glamor X acceleration enabled on AMD Radeon Graphics (radeonsi, raphael_mendocino, LLVM 19.1.7, DRM 3.61, 6.14.6-zen1-1-zen) [ 9.826] (II) AMDGPU(G0): glamor detected, initialising EGL layer. [ 9.826] (==) AMDGPU(G0): TearFree property default: auto [ 9.826] (II) AMDGPU(G0): Output HDMI-A-1-1 has no monitor section [ 9.826] (II) AMDGPU(G0): Output DisplayPort-1-3 has no monitor section [ 9.826] (II) AMDGPU(G0): Output DisplayPort-1-4 has no monitor section [ 9.826] (II) AMDGPU(G0): Output DisplayPort-1-5 has no monitor section [ 9.827] (II) AMDGPU(G0): EDID for output HDMI-A-1-1 [ 9.827] (II) AMDGPU(G0): EDID for output DisplayPort-1-3 [ 9.827] (II) AMDGPU(G0): EDID for output DisplayPort-1-4 [ 9.827] (II) AMDGPU(G0): EDID for output DisplayPort-1-5 [ 9.827] (II) AMDGPU(G0): mem size init: gart size :3cd02a000 vram size: s:1e83d000 visible:1e83d000 [ 9.827] (==) AMDGPU(G0): DPI set to (96, 96) [ 9.827] (==) AMDGPU(G0): Using gamma correction (1.0, 1.0, 1.0) [ 9.827] (II) Loading sub module "ramdac" [ 9.827] (II) LoadModule: "ramdac" [ 9.827] (II) Module "ramdac" already built-in [ 9.827] (II) UnloadModule: "nouveau" [ 9.827] (II) Unloading nouveau [ 9.827] (II) UnloadModule: "modesetting" [ 9.827] (II) Unloading modesetting [ 9.828] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory [ 9.828] (II) NVIDIA: access. [ 9.834] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon [ 9.834] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X [ 9.834] (II) NVIDIA(0): configuration option may not be set correctly. When the [ 9.834] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will [ 9.834] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For [ 9.834] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and [ 9.834] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X [ 9.834] (II) NVIDIA(0): Config Options in the README. [ 9.846] (II) NVIDIA(0): Setting mode "DFP-1:nvidia-auto-select,DFP-0:nvidia-auto-select" [ 9.912] (==) NVIDIA(0): Disabling shared memory pixmaps [ 9.912] (==) NVIDIA(0): Backing store enabled [ 9.912] (==) NVIDIA(0): Silken mouse enabled [ 9.912] (==) NVIDIA(0): DPMS enabled [ 9.912] (II) Loading sub module "dri2" [ 9.912] (II) LoadModule: "dri2" [ 9.912] (II) Module "dri2" already built-in [ 9.912] (II) NVIDIA(0): [DRI2] Setup complete [ 9.912] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 9.912] (II) AMDGPU(G0): [DRI2] Setup complete [ 9.912] (II) AMDGPU(G0): [DRI2] DRI driver: radeonsi [ 9.912] (II) AMDGPU(G0): [DRI2] VDPAU driver: radeonsi [ 9.912] (II) AMDGPU(G0): Front buffer pitch: 4096 bytes [ 9.912] (II) AMDGPU(G0): SYNC extension fences enabled [ 9.912] (II) AMDGPU(G0): Present extension enabled [ 9.912] (==) AMDGPU(G0): DRI3 enabled [ 9.912] (==) AMDGPU(G0): Backing store enabled [ 9.912] (II) AMDGPU(G0): Direct rendering enabled [ 9.919] (II) AMDGPU(G0): Use GLAMOR acceleration. [ 9.919] (II) AMDGPU(G0): Acceleration enabled [ 9.919] (==) AMDGPU(G0): DPMS enabled [ 9.919] (==) AMDGPU(G0): Silken mouse enabled [ 9.920] (WW) AMDGPU(G0): Option "HotplugDriver" is not used [ 9.920] (II) Initializing extension Generic Event Extension [ 9.920] (II) Initializing extension SHAPE [ 9.920] (II) Initializing extension MIT-SHM [ 9.920] (II) Initializing extension XInputExtension [ 9.920] (II) Initializing extension XTEST [ 9.920] (II) Initializing extension BIG-REQUESTS [ 9.920] (II) Initializing extension SYNC [ 9.920] (II) Initializing extension XKEYBOARD [ 9.920] (II) Initializing extension XC-MISC [ 9.920] (II) Initializing extension SECURITY [ 9.920] (II) Initializing extension XFIXES [ 9.920] (II) Initializing extension RENDER [ 9.920] (II) Initializing extension RANDR [ 9.920] (II) Initializing extension COMPOSITE [ 9.920] (II) Initializing extension DAMAGE [ 9.920] (II) Initializing extension MIT-SCREEN-SAVER [ 9.920] (II) Initializing extension DOUBLE-BUFFER [ 9.921] (II) Initializing extension RECORD [ 9.921] (II) Initializing extension DPMS [ 9.921] (II) Initializing extension Present [ 9.921] (II) Initializing extension DRI3 [ 9.921] (II) Initializing extension X-Resource [ 9.921] (II) Initializing extension XVideo [ 9.921] (II) Initializing extension XVideo-MotionCompensation [ 9.921] (II) Initializing extension GLX [ 9.921] (II) Initializing extension GLX [ 9.921] (II) Indirect GLX disabled. [ 9.921] (II) GLX: Another vendor is already registered for screen 0 [ 9.921] (II) Initializing extension XFree86-VidModeExtension [ 9.921] (II) Initializing extension XFree86-DGA [ 9.921] (II) Initializing extension XFree86-DRI [ 9.921] (II) Initializing extension DRI2 [ 9.921] (II) Initializing extension NV-GLX [ 9.921] (II) Initializing extension NV-CONTROL [ 9.921] (II) Initializing extension XINERAMA [ 9.977] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 9.977] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 9.977] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 9.977] (**) Power Button: Applying InputClass "system-keyboard" [ 9.977] (II) LoadModule: "libinput" [ 9.977] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 9.978] (II) Module libinput: vendor="X.Org Foundation" [ 9.978] compiled for 1.21.1.13, module version = 1.5.0 [ 9.978] Module class: X.Org XInput Driver [ 9.978] ABI class: X.Org XInput driver, version 24.4 [ 9.978] (II) Using input driver 'libinput' for 'Power Button' [ 9.978] (**) Power Button: always reports core events [ 9.978] (**) Option "Device" "/dev/input/event1" [ 9.981] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 9.981] (II) event1 - Power Button: device is a keyboard [ 9.981] (II) event1 - Power Button: device removed [ 9.981] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 9.981] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 9.981] (**) Option "xkb_layout" "us" [ 9.981] (WW) Option "xkb_variant" requires a string value [ 9.981] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 9.981] (II) event1 - Power Button: device is a keyboard [ 9.981] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 9.981] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 9.981] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 9.981] (**) Video Bus: Applying InputClass "system-keyboard" [ 9.981] (II) Using input driver 'libinput' for 'Video Bus' [ 9.981] (**) Video Bus: always reports core events [ 9.981] (**) Option "Device" "/dev/input/event2" [ 9.982] (II) event2 - Video Bus: is tagged by udev as: Keyboard [ 9.982] (II) event2 - Video Bus: device is a keyboard [ 9.982] (II) event2 - Video Bus: device removed [ 10.003] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input2/event2" [ 10.003] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 10.003] (**) Option "xkb_layout" "us" [ 10.003] (WW) Option "xkb_variant" requires a string value [ 10.003] (II) event2 - Video Bus: is tagged by udev as: Keyboard [ 10.003] (II) event2 - Video Bus: device is a keyboard [ 10.003] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 10.003] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 10.003] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 10.003] (**) Power Button: Applying InputClass "system-keyboard" [ 10.003] (II) Using input driver 'libinput' for 'Power Button' [ 10.003] (**) Power Button: always reports core events [ 10.003] (**) Option "Device" "/dev/input/event0" [ 10.004] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 10.004] (II) event0 - Power Button: device is a keyboard [ 10.004] (II) event0 - Power Button: device removed [ 10.004] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 10.004] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 10.004] (**) Option "xkb_layout" "us" [ 10.004] (WW) Option "xkb_variant" requires a string value [ 10.004] (II) event0 - Power Button: is tagged by udev as: Keyboard [ 10.004] (II) event0 - Power Button: device is a keyboard [ 10.005] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14) [ 10.005] (II) No input driver specified, ignoring this device. [ 10.005] (II) This device may have been added with another device file. [ 10.005] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15) [ 10.005] (II) No input driver specified, ignoring this device. [ 10.005] (II) This device may have been added with another device file. [ 10.005] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event17) [ 10.005] (II) No input driver specified, ignoring this device. [ 10.005] (II) This device may have been added with another device file. [ 10.005] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19) [ 10.005] (II) No input driver specified, ignoring this device. [ 10.005] (II) This device may have been added with another device file. [ 10.006] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8) [ 10.006] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall" [ 10.006] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall" [ 10.006] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 10.006] (**) Logitech USB Receiver: always reports core events [ 10.006] (**) Option "Device" "/dev/input/event8" [ 10.058] (II) event8 - Logitech USB Receiver: is tagged by udev as: Mouse [ 10.058] (II) event8 - Logitech USB Receiver: device is a pointer [ 10.058] (II) event8 - Logitech USB Receiver: device removed [ 10.068] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.068] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.068] (II) libinput: Logitech USB Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.068] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:02:00.0/0000:03:0c.0/0000:0c:00.0/usb1/1-10/1-10:1.0/0003:046D:C547.0008/input/input8/event8" [ 10.068] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9) [ 10.068] (**) Option "AccelerationScheme" "none" [ 10.068] (**) Logitech USB Receiver: (accel) selected scheme none/0 [ 10.068] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 10.068] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 10.120] (II) event8 - Logitech USB Receiver: is tagged by udev as: Mouse [ 10.120] (II) event8 - Logitech USB Receiver: device is a pointer [ 10.120] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2) [ 10.120] (II) No input driver specified, ignoring this device. [ 10.120] (II) This device may have been added with another device file. [ 10.121] (II) config/udev: Adding input device Logitech USB Receiver Keyboard (/dev/input/event9) [ 10.121] (**) Logitech USB Receiver Keyboard: Applying InputClass "evdev keyboard catchall" [ 10.121] (**) Logitech USB Receiver Keyboard: Applying InputClass "libinput keyboard catchall" [ 10.121] (**) Logitech USB Receiver Keyboard: Applying InputClass "system-keyboard" [ 10.121] (II) Using input driver 'libinput' for 'Logitech USB Receiver Keyboard' [ 10.121] (**) Logitech USB Receiver Keyboard: always reports core events [ 10.121] (**) Option "Device" "/dev/input/event9" [ 10.122] (II) event9 - Logitech USB Receiver Keyboard: is tagged by udev as: Keyboard [ 10.122] (II) event9 - Logitech USB Receiver Keyboard: device is a keyboard [ 10.122] (II) event9 - Logitech USB Receiver Keyboard: device removed [ 10.122] (II) libinput: Logitech USB Receiver Keyboard: needs a virtual subdevice [ 10.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:02:00.0/0000:03:0c.0/0000:0c:00.0/usb1/1-10/1-10:1.1/0003:046D:C547.0009/input/input9/event9" [ 10.122] (II) XINPUT: Adding extended input device "Logitech USB Receiver Keyboard" (type: MOUSE, id 10) [ 10.122] (**) Option "AccelerationScheme" "none" [ 10.122] (**) Logitech USB Receiver Keyboard: (accel) selected scheme none/0 [ 10.122] (**) Logitech USB Receiver Keyboard: (accel) acceleration factor: 2.000 [ 10.122] (**) Logitech USB Receiver Keyboard: (accel) acceleration threshold: 4 [ 10.122] (II) event9 - Logitech USB Receiver Keyboard: is tagged by udev as: Keyboard [ 10.122] (II) event9 - Logitech USB Receiver Keyboard: device is a keyboard [ 10.123] (II) config/udev: Adding input device 8BitDo 8BitDo Retro Keyboard Receiver (/dev/input/event6) [ 10.123] (**) 8BitDo 8BitDo Retro Keyboard Receiver: Applying InputClass "evdev pointer catchall" [ 10.123] (**) 8BitDo 8BitDo Retro Keyboard Receiver: Applying InputClass "libinput pointer catchall" [ 10.123] (II) Using input driver 'libinput' for '8BitDo 8BitDo Retro Keyboard Receiver' [ 10.123] (**) 8BitDo 8BitDo Retro Keyboard Receiver: always reports core events [ 10.123] (**) Option "Device" "/dev/input/event6" [ 10.175] (II) event6 - 8BitDo 8BitDo Retro Keyboard Receiver: is tagged by udev as: Mouse [ 10.175] (II) event6 - 8BitDo 8BitDo Retro Keyboard Receiver: device is a pointer [ 10.175] (II) event6 - 8BitDo 8BitDo Retro Keyboard Receiver: device removed [ 10.192] (II) libinput: 8BitDo 8BitDo Retro Keyboard Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.192] (II) libinput: 8BitDo 8BitDo Retro Keyboard Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.192] (II) libinput: 8BitDo 8BitDo Retro Keyboard Receiver: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.192] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:02:00.0/0000:03:0c.0/0000:0c:00.0/usb1/1-2/1-2:1.0/0003:2DC8:5201.0005/input/input6/event6" [ 10.192] (II) XINPUT: Adding extended input device "8BitDo 8BitDo Retro Keyboard Receiver" (type: MOUSE, id 11) [ 10.192] (**) Option "AccelerationScheme" "none" [ 10.192] (**) 8BitDo 8BitDo Retro Keyboard Receiver: (accel) selected scheme none/0 [ 10.192] (**) 8BitDo 8BitDo Retro Keyboard Receiver: (accel) acceleration factor: 2.000 [ 10.192] (**) 8BitDo 8BitDo Retro Keyboard Receiver: (accel) acceleration threshold: 4 [ 10.244] (II) event6 - 8BitDo 8BitDo Retro Keyboard Receiver: is tagged by udev as: Mouse [ 10.244] (II) event6 - 8BitDo 8BitDo Retro Keyboard Receiver: device is a pointer [ 10.244] (II) config/udev: Adding input device 8BitDo 8BitDo Retro Keyboard Receiver (/dev/input/mouse1) [ 10.244] (II) No input driver specified, ignoring this device. [ 10.244] (II) This device may have been added with another device file. [ 10.245] (II) config/udev: Adding input device 8BitDo 8BitDo Retro Keyboard Receiver Keyboard (/dev/input/event7) [ 10.245] (**) 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: Applying InputClass "evdev keyboard catchall" [ 10.245] (**) 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: Applying InputClass "libinput keyboard catchall" [ 10.245] (**) 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: Applying InputClass "system-keyboard" [ 10.245] (II) Using input driver 'libinput' for '8BitDo 8BitDo Retro Keyboard Receiver Keyboard' [ 10.245] (**) 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: always reports core events [ 10.245] (**) Option "Device" "/dev/input/event7" [ 10.246] (II) event7 - 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: is tagged by udev as: Keyboard [ 10.246] (II) event7 - 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: device is a keyboard [ 10.246] (II) event7 - 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: device removed [ 10.246] (II) libinput: 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: needs a virtual subdevice [ 10.246] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:02:00.0/0000:03:0c.0/0000:0c:00.0/usb1/1-2/1-2:1.2/0003:2DC8:5201.0007/input/input7/event7" [ 10.246] (II) XINPUT: Adding extended input device "8BitDo 8BitDo Retro Keyboard Receiver Keyboard" (type: MOUSE, id 12) [ 10.246] (**) Option "AccelerationScheme" "none" [ 10.246] (**) 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: (accel) selected scheme none/0 [ 10.246] (**) 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: (accel) acceleration factor: 2.000 [ 10.246] (**) 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: (accel) acceleration threshold: 4 [ 10.247] (II) event7 - 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: is tagged by udev as: Keyboard [ 10.247] (II) event7 - 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: device is a keyboard [ 10.247] (II) config/udev: Adding input device Actions GT Lynck 3 Consumer Control (/dev/input/event10) [ 10.247] (**) Actions GT Lynck 3 Consumer Control: Applying InputClass "evdev keyboard catchall" [ 10.247] (**) Actions GT Lynck 3 Consumer Control: Applying InputClass "libinput keyboard catchall" [ 10.247] (**) Actions GT Lynck 3 Consumer Control: Applying InputClass "system-keyboard" [ 10.247] (II) Using input driver 'libinput' for 'Actions GT Lynck 3 Consumer Control' [ 10.247] (**) Actions GT Lynck 3 Consumer Control: always reports core events [ 10.247] (**) Option "Device" "/dev/input/event10" [ 10.248] (II) event10 - Actions GT Lynck 3 Consumer Control: is tagged by udev as: Keyboard [ 10.248] (II) event10 - Actions GT Lynck 3 Consumer Control: device is a keyboard [ 10.248] (II) event10 - Actions GT Lynck 3 Consumer Control: device removed [ 10.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:02:00.0/0000:03:0c.0/0000:0c:00.0/usb1/1-9/1-9.1/1-9.1:1.0/0003:10D6:DD00.000B/input/input10/event10" [ 10.269] (II) XINPUT: Adding extended input device "Actions GT Lynck 3 Consumer Control" (type: KEYBOARD, id 13) [ 10.269] (**) Option "xkb_layout" "us" [ 10.269] (WW) Option "xkb_variant" requires a string value [ 10.270] (II) event10 - Actions GT Lynck 3 Consumer Control: is tagged by udev as: Keyboard [ 10.270] (II) event10 - Actions GT Lynck 3 Consumer Control: device is a keyboard [ 10.270] (II) config/udev: Adding input device Actions GT Lynck 3 (/dev/input/event11) [ 10.270] (**) Actions GT Lynck 3: Applying InputClass "evdev keyboard catchall" [ 10.270] (**) Actions GT Lynck 3: Applying InputClass "libinput keyboard catchall" [ 10.270] (**) Actions GT Lynck 3: Applying InputClass "system-keyboard" [ 10.270] (II) Using input driver 'libinput' for 'Actions GT Lynck 3' [ 10.270] (**) Actions GT Lynck 3: always reports core events [ 10.270] (**) Option "Device" "/dev/input/event11" [ 10.271] (II) event11 - Actions GT Lynck 3: is tagged by udev as: Keyboard [ 10.271] (II) event11 - Actions GT Lynck 3: device is a keyboard [ 10.271] (II) event11 - Actions GT Lynck 3: device removed [ 10.287] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:02:00.0/0000:03:0c.0/0000:0c:00.0/usb1/1-9/1-9.1/1-9.1:1.0/0003:10D6:DD00.000B/input/input11/event11" [ 10.287] (II) XINPUT: Adding extended input device "Actions GT Lynck 3" (type: KEYBOARD, id 14) [ 10.287] (**) Option "xkb_layout" "us" [ 10.287] (WW) Option "xkb_variant" requires a string value [ 10.287] (II) event11 - Actions GT Lynck 3: is tagged by udev as: Keyboard [ 10.287] (II) event11 - Actions GT Lynck 3: device is a keyboard [ 10.288] (II) config/udev: Adding input device Actions GT Lynck 3 (/dev/input/event12) [ 10.288] (II) No input driver specified, ignoring this device. [ 10.288] (II) This device may have been added with another device file. [ 10.288] (II) config/udev: Adding input device Actions GT Lynck 3 (/dev/input/event13) [ 10.288] (II) No input driver specified, ignoring this device. [ 10.289] (II) This device may have been added with another device file. [ 10.289] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event16) [ 10.289] (II) No input driver specified, ignoring this device. [ 10.289] (II) This device may have been added with another device file. [ 10.289] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event18) [ 10.289] (II) No input driver specified, ignoring this device. [ 10.289] (II) This device may have been added with another device file. [ 10.289] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event20) [ 10.289] (II) No input driver specified, ignoring this device. [ 10.289] (II) This device may have been added with another device file. [ 10.289] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event21) [ 10.289] (II) No input driver specified, ignoring this device. [ 10.289] (II) This device may have been added with another device file. [ 10.290] (II) config/udev: Adding input device 8BitDo Retro 18 Numpad (/dev/input/event4) [ 10.290] (**) 8BitDo Retro 18 Numpad: Applying InputClass "evdev pointer catchall" [ 10.290] (**) 8BitDo Retro 18 Numpad: Applying InputClass "libinput pointer catchall" [ 10.290] (II) Using input driver 'libinput' for '8BitDo Retro 18 Numpad' [ 10.290] (**) 8BitDo Retro 18 Numpad: always reports core events [ 10.290] (**) Option "Device" "/dev/input/event4" [ 10.342] (II) event4 - 8BitDo Retro 18 Numpad: is tagged by udev as: Mouse [ 10.342] (II) event4 - 8BitDo Retro 18 Numpad: device is a pointer [ 10.342] (II) event4 - 8BitDo Retro 18 Numpad: device removed [ 10.359] (II) libinput: 8BitDo Retro 18 Numpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.359] (II) libinput: 8BitDo Retro 18 Numpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.359] (II) libinput: 8BitDo Retro 18 Numpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.359] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0f:00.4/usb5/5-2/5-2:1.0/0003:2DC8:5204.0002/input/input4/event4" [ 10.359] (II) XINPUT: Adding extended input device "8BitDo Retro 18 Numpad" (type: MOUSE, id 15) [ 10.359] (**) Option "AccelerationScheme" "none" [ 10.359] (**) 8BitDo Retro 18 Numpad: (accel) selected scheme none/0 [ 10.359] (**) 8BitDo Retro 18 Numpad: (accel) acceleration factor: 2.000 [ 10.359] (**) 8BitDo Retro 18 Numpad: (accel) acceleration threshold: 4 [ 10.411] (II) event4 - 8BitDo Retro 18 Numpad: is tagged by udev as: Mouse [ 10.411] (II) event4 - 8BitDo Retro 18 Numpad: device is a pointer [ 10.411] (II) config/udev: Adding input device 8BitDo Retro 18 Numpad (/dev/input/mouse0) [ 10.411] (II) No input driver specified, ignoring this device. [ 10.411] (II) This device may have been added with another device file. [ 10.412] (II) config/udev: Adding input device 8BitDo Retro 18 Numpad Keyboard (/dev/input/event5) [ 10.412] (**) 8BitDo Retro 18 Numpad Keyboard: Applying InputClass "evdev keyboard catchall" [ 10.412] (**) 8BitDo Retro 18 Numpad Keyboard: Applying InputClass "libinput keyboard catchall" [ 10.412] (**) 8BitDo Retro 18 Numpad Keyboard: Applying InputClass "system-keyboard" [ 10.412] (II) Using input driver 'libinput' for '8BitDo Retro 18 Numpad Keyboard' [ 10.412] (**) 8BitDo Retro 18 Numpad Keyboard: always reports core events [ 10.412] (**) Option "Device" "/dev/input/event5" [ 10.412] (II) event5 - 8BitDo Retro 18 Numpad Keyboard: is tagged by udev as: Keyboard [ 10.412] (II) event5 - 8BitDo Retro 18 Numpad Keyboard: device is a keyboard [ 10.412] (II) event5 - 8BitDo Retro 18 Numpad Keyboard: device removed [ 10.412] (II) libinput: 8BitDo Retro 18 Numpad Keyboard: needs a virtual subdevice [ 10.412] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0f:00.4/usb5/5-2/5-2:1.1/0003:2DC8:5204.0003/input/input5/event5" [ 10.412] (II) XINPUT: Adding extended input device "8BitDo Retro 18 Numpad Keyboard" (type: MOUSE, id 16) [ 10.412] (**) Option "AccelerationScheme" "none" [ 10.412] (**) 8BitDo Retro 18 Numpad Keyboard: (accel) selected scheme none/0 [ 10.412] (**) 8BitDo Retro 18 Numpad Keyboard: (accel) acceleration factor: 2.000 [ 10.412] (**) 8BitDo Retro 18 Numpad Keyboard: (accel) acceleration threshold: 4 [ 10.413] (II) event5 - 8BitDo Retro 18 Numpad Keyboard: is tagged by udev as: Keyboard [ 10.413] (II) event5 - 8BitDo Retro 18 Numpad Keyboard: device is a keyboard [ 10.413] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event22) [ 10.413] (II) No input driver specified, ignoring this device. [ 10.413] (II) This device may have been added with another device file. [ 10.414] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event23) [ 10.414] (II) No input driver specified, ignoring this device. [ 10.414] (II) This device may have been added with another device file. [ 10.414] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event24) [ 10.414] (II) No input driver specified, ignoring this device. [ 10.414] (II) This device may have been added with another device file. [ 10.414] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event25) [ 10.414] (II) No input driver specified, ignoring this device. [ 10.414] (II) This device may have been added with another device file. [ 10.414] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event26) [ 10.414] (II) No input driver specified, ignoring this device. [ 10.414] (II) This device may have been added with another device file. [ 10.418] (**) Logitech USB Receiver Keyboard: Applying InputClass "evdev keyboard catchall" [ 10.418] (**) Logitech USB Receiver Keyboard: Applying InputClass "libinput keyboard catchall" [ 10.418] (**) Logitech USB Receiver Keyboard: Applying InputClass "system-keyboard" [ 10.418] (II) Using input driver 'libinput' for 'Logitech USB Receiver Keyboard' [ 10.418] (**) Logitech USB Receiver Keyboard: always reports core events [ 10.418] (**) Option "Device" "/dev/input/event9" [ 10.418] (II) libinput: Logitech USB Receiver Keyboard: is a virtual subdevice [ 10.418] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:02:00.0/0000:03:0c.0/0000:0c:00.0/usb1/1-10/1-10:1.1/0003:046D:C547.0009/input/input9/event9" [ 10.418] (II) XINPUT: Adding extended input device "Logitech USB Receiver Keyboard" (type: KEYBOARD, id 17) [ 10.418] (**) Option "xkb_layout" "us" [ 10.418] (WW) Option "xkb_variant" requires a string value [ 10.418] (**) 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: Applying InputClass "evdev keyboard catchall" [ 10.418] (**) 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: Applying InputClass "libinput keyboard catchall" [ 10.418] (**) 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: Applying InputClass "system-keyboard" [ 10.418] (II) Using input driver 'libinput' for '8BitDo 8BitDo Retro Keyboard Receiver Keyboard' [ 10.418] (**) 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: always reports core events [ 10.418] (**) Option "Device" "/dev/input/event7" [ 10.418] (II) libinput: 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: is a virtual subdevice [ 10.418] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:02:00.0/0000:03:0c.0/0000:0c:00.0/usb1/1-2/1-2:1.2/0003:2DC8:5201.0007/input/input7/event7" [ 10.418] (II) XINPUT: Adding extended input device "8BitDo 8BitDo Retro Keyboard Receiver Keyboard" (type: KEYBOARD, id 18) [ 10.418] (**) Option "xkb_layout" "us" [ 10.418] (WW) Option "xkb_variant" requires a string value [ 10.418] (**) 8BitDo Retro 18 Numpad Keyboard: Applying InputClass "evdev keyboard catchall" [ 10.418] (**) 8BitDo Retro 18 Numpad Keyboard: Applying InputClass "libinput keyboard catchall" [ 10.418] (**) 8BitDo Retro 18 Numpad Keyboard: Applying InputClass "system-keyboard" [ 10.418] (II) Using input driver 'libinput' for '8BitDo Retro 18 Numpad Keyboard' [ 10.418] (**) 8BitDo Retro 18 Numpad Keyboard: always reports core events [ 10.418] (**) Option "Device" "/dev/input/event5" [ 10.418] (II) libinput: 8BitDo Retro 18 Numpad Keyboard: is a virtual subdevice [ 10.418] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:08.1/0000:0f:00.4/usb5/5-2/5-2:1.1/0003:2DC8:5204.0003/input/input5/event5" [ 10.418] (II) XINPUT: Adding extended input device "8BitDo Retro 18 Numpad Keyboard" (type: KEYBOARD, id 19) [ 10.418] (**) Option "xkb_layout" "us" [ 10.418] (WW) Option "xkb_variant" requires a string value [ 10.463] (--) NVIDIA(GPU-0): Samsung C27F390 (DFP-0): connected [ 10.463] (--) NVIDIA(GPU-0): Samsung C27F390 (DFP-0): Internal TMDS [ 10.463] (--) NVIDIA(GPU-0): Samsung C27F390 (DFP-0): 600.0 MHz maximum pixel clock [ 10.463] (--) NVIDIA(GPU-0): [ 10.507] (--) NVIDIA(GPU-0): Samsung C27F390 (DFP-0): connected [ 10.507] (--) NVIDIA(GPU-0): Samsung C27F390 (DFP-0): Internal TMDS [ 10.507] (--) NVIDIA(GPU-0): Samsung C27F390 (DFP-0): 600.0 MHz maximum pixel clock [ 10.508] (--) NVIDIA(GPU-0): [ 10.584] (II) event1 - Power Button: device removed [ 10.584] (II) event2 - Video Bus: device removed [ 10.590] (II) event0 - Power Button: device removed [ 10.590] (II) event8 - Logitech USB Receiver: device removed [ 10.594] (II) event6 - 8BitDo 8BitDo Retro Keyboard Receiver: device removed [ 10.608] (II) event10 - Actions GT Lynck 3 Consumer Control: device removed [ 10.615] (II) event11 - Actions GT Lynck 3: device removed [ 10.631] (II) event4 - 8BitDo Retro 18 Numpad: device removed [ 10.639] (II) event9 - Logitech USB Receiver Keyboard: device removed [ 10.639] (II) event7 - 8BitDo 8BitDo Retro Keyboard Receiver Keyboard: device removed [ 10.639] (II) event5 - 8BitDo Retro 18 Numpad Keyboard: device removed [ 6489.504] (II) config/udev: Adding input device Garrett's Z Fold5 (AVRCP) (/dev/input/event27) [ 6489.504] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "evdev keyboard catchall" [ 6489.504] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "libinput keyboard catchall" [ 6489.504] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "system-keyboard" [ 6489.504] (II) Using input driver 'libinput' for 'Garrett's Z Fold5 (AVRCP)' [ 6489.504] (**) Garrett's Z Fold5 (AVRCP): always reports core events [ 6489.504] (**) Option "Device" "/dev/input/event27" [ 6489.504] (II) event27 - Garrett's Z Fold5 (AVRCP): is tagged by udev as: Keyboard [ 6489.504] (II) event27 - Garrett's Z Fold5 (AVRCP): device is a keyboard [ 6489.505] (II) event27 - Garrett's Z Fold5 (AVRCP): device removed [ 6489.505] (**) Option "config_info" "udev:/sys/devices/virtual/input/input27/event27" [ 6489.505] (II) XINPUT: Adding extended input device "Garrett's Z Fold5 (AVRCP)" (type: KEYBOARD, id 20) [ 6489.505] (**) Option "xkb_layout" "us" [ 6489.505] (WW) Option "xkb_variant" requires a string value [ 9718.065] (II) config/udev: removing device Garrett's Z Fold5 (AVRCP) [ 9718.065] (II) UnloadModule: "libinput" [ 9720.409] (II) config/udev: Adding input device Garrett's Z Fold5 (AVRCP) (/dev/input/event27) [ 9720.409] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "evdev keyboard catchall" [ 9720.409] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "libinput keyboard catchall" [ 9720.409] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "system-keyboard" [ 9720.409] (II) Using input driver 'libinput' for 'Garrett's Z Fold5 (AVRCP)' [ 9720.409] (**) Garrett's Z Fold5 (AVRCP): always reports core events [ 9720.409] (**) Option "Device" "/dev/input/event27" [ 9720.410] (II) event27 - Garrett's Z Fold5 (AVRCP): is tagged by udev as: Keyboard [ 9720.410] (II) event27 - Garrett's Z Fold5 (AVRCP): device is a keyboard [ 9720.410] (II) event27 - Garrett's Z Fold5 (AVRCP): device removed [ 9720.410] (**) Option "config_info" "udev:/sys/devices/virtual/input/input28/event27" [ 9720.410] (II) XINPUT: Adding extended input device "Garrett's Z Fold5 (AVRCP)" (type: KEYBOARD, id 20) [ 9720.410] (**) Option "xkb_layout" "us" [ 9720.410] (WW) Option "xkb_variant" requires a string value [ 9813.525] (II) config/udev: removing device Garrett's Z Fold5 (AVRCP) [ 9813.525] (II) UnloadModule: "libinput" [ 24816.239] (II) config/udev: Adding input device Logitech G502 X PLUS MILLENNIUM FALCON (/dev/input/mouse3) [ 24816.239] (II) No input driver specified, ignoring this device. [ 24816.239] (II) This device may have been added with another device file. [ 24816.245] (II) config/udev: Adding input device Logitech G502 X PLUS MILLENNIUM FALCON Keyboard (/dev/input/event28) [ 24816.245] (**) Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: Applying InputClass "evdev keyboard catchall" [ 24816.245] (**) Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: Applying InputClass "libinput keyboard catchall" [ 24816.245] (**) Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: Applying InputClass "system-keyboard" [ 24816.245] (II) Using input driver 'libinput' for 'Logitech G502 X PLUS MILLENNIUM FALCON Keyboard' [ 24816.245] (**) Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: always reports core events [ 24816.245] (**) Option "Device" "/dev/input/event28" [ 24816.246] (II) event28 - Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: is tagged by udev as: Keyboard [ 24816.246] (II) event28 - Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: device is a keyboard [ 24816.246] (II) event28 - Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: device removed [ 24816.246] (II) libinput: Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: needs a virtual subdevice [ 24816.246] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:02:00.0/0000:03:0c.0/0000:0c:00.0/usb1/1-1/1-1:1.1/0003:046D:C09E.000D/input/input30/event28" [ 24816.246] (II) XINPUT: Adding extended input device "Logitech G502 X PLUS MILLENNIUM FALCON Keyboard" (type: MOUSE, id 20) [ 24816.246] (**) Option "AccelerationScheme" "none" [ 24816.246] (**) Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: (accel) selected scheme none/0 [ 24816.246] (**) Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: (accel) acceleration factor: 2.000 [ 24816.246] (**) Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: (accel) acceleration threshold: 4 [ 24816.246] (**) Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: Applying InputClass "evdev keyboard catchall" [ 24816.246] (**) Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: Applying InputClass "libinput keyboard catchall" [ 24816.246] (**) Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: Applying InputClass "system-keyboard" [ 24816.246] (II) Using input driver 'libinput' for 'Logitech G502 X PLUS MILLENNIUM FALCON Keyboard' [ 24816.246] (**) Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: always reports core events [ 24816.246] (**) Option "Device" "/dev/input/event28" [ 24816.246] (II) libinput: Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: is a virtual subdevice [ 24816.246] (EE) libinput: Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: Parent device not available [ 24816.247] (II) event28 - Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: is tagged by udev as: Keyboard [ 24816.247] (II) event28 - Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: device is a keyboard [ 24816.247] (II) event28 - Logitech G502 X PLUS MILLENNIUM FALCON Keyboard: device removed [ 24816.247] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:02:00.0/0000:03:0c.0/0000:0c:00.0/usb1/1-1/1-1:1.1/0003:046D:C09E.000D/input/input30/event28" [ 24816.247] (II) XINPUT: Adding extended input device "Logitech G502 X PLUS MILLENNIUM FALCON Keyboard" (type: KEYBOARD, id 21) [ 24816.247] (**) Option "xkb_layout" "us" [ 24816.247] (WW) Option "xkb_variant" requires a string value [ 24816.306] (II) config/udev: Adding input device Logitech G502 X PLUS MILLENNIUM FALCON (/dev/input/event27) [ 24816.306] (**) Logitech G502 X PLUS MILLENNIUM FALCON: Applying InputClass "evdev pointer catchall" [ 24816.306] (**) Logitech G502 X PLUS MILLENNIUM FALCON: Applying InputClass "libinput pointer catchall" [ 24816.306] (II) Using input driver 'libinput' for 'Logitech G502 X PLUS MILLENNIUM FALCON' [ 24816.306] (**) Logitech G502 X PLUS MILLENNIUM FALCON: always reports core events [ 24816.306] (**) Option "Device" "/dev/input/event27" [ 24816.358] (II) event27 - Logitech G502 X PLUS MILLENNIUM FALCON: is tagged by udev as: Mouse [ 24816.358] (II) event27 - Logitech G502 X PLUS MILLENNIUM FALCON: device is a pointer [ 24816.358] (II) event27 - Logitech G502 X PLUS MILLENNIUM FALCON: device removed [ 24816.358] (II) libinput: Logitech G502 X PLUS MILLENNIUM FALCON: Step value 0 was provided, libinput Fallback acceleration function is used. [ 24816.358] (II) libinput: Logitech G502 X PLUS MILLENNIUM FALCON: Step value 0 was provided, libinput Fallback acceleration function is used. [ 24816.358] (II) libinput: Logitech G502 X PLUS MILLENNIUM FALCON: Step value 0 was provided, libinput Fallback acceleration function is used. [ 24816.358] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/0000:02:00.0/0000:03:0c.0/0000:0c:00.0/usb1/1-1/1-1:1.0/0003:046D:C09E.000C/input/input29/event27" [ 24816.358] (II) XINPUT: Adding extended input device "Logitech G502 X PLUS MILLENNIUM FALCON" (type: MOUSE, id 22) [ 24816.358] (**) Option "AccelerationScheme" "none" [ 24816.358] (**) Logitech G502 X PLUS MILLENNIUM FALCON: (accel) selected scheme none/0 [ 24816.358] (**) Logitech G502 X PLUS MILLENNIUM FALCON: (accel) acceleration factor: 2.000 [ 24816.358] (**) Logitech G502 X PLUS MILLENNIUM FALCON: (accel) acceleration threshold: 4 [ 30919.192] (II) config/udev: Adding input device Garrett's Z Fold5 (AVRCP) (/dev/input/event29) [ 30919.192] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "evdev keyboard catchall" [ 30919.192] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "libinput keyboard catchall" [ 30919.192] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "system-keyboard" [ 30919.192] (II) Using input driver 'libinput' for 'Garrett's Z Fold5 (AVRCP)' [ 30919.192] (**) Garrett's Z Fold5 (AVRCP): always reports core events [ 30919.192] (**) Option "Device" "/dev/input/event29" [ 30919.193] (II) event29 - Garrett's Z Fold5 (AVRCP): is tagged by udev as: Keyboard [ 30919.193] (II) event29 - Garrett's Z Fold5 (AVRCP): device is a keyboard [ 30919.193] (II) event29 - Garrett's Z Fold5 (AVRCP): device removed [ 30919.193] (**) Option "config_info" "udev:/sys/devices/virtual/input/input31/event29" [ 30919.193] (II) XINPUT: Adding extended input device "Garrett's Z Fold5 (AVRCP)" (type: KEYBOARD, id 23) [ 30919.193] (**) Option "xkb_layout" "us" [ 30919.193] (WW) Option "xkb_variant" requires a string value [ 30921.935] (II) config/udev: removing device Garrett's Z Fold5 (AVRCP) [ 30921.936] (II) UnloadModule: "libinput" [ 30936.213] (II) config/udev: Adding input device Garrett's Z Fold5 (AVRCP) (/dev/input/event29) [ 30936.213] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "evdev keyboard catchall" [ 30936.213] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "libinput keyboard catchall" [ 30936.213] (**) Garrett's Z Fold5 (AVRCP): Applying InputClass "system-keyboard" [ 30936.213] (II) Using input driver 'libinput' for 'Garrett's Z Fold5 (AVRCP)' [ 30936.213] (**) Garrett's Z Fold5 (AVRCP): always reports core events [ 30936.213] (**) Option "Device" "/dev/input/event29" [ 30936.213] (II) event29 - Garrett's Z Fold5 (AVRCP): is tagged by udev as: Keyboard [ 30936.214] (II) event29 - Garrett's Z Fold5 (AVRCP): device is a keyboard [ 30936.214] (II) event29 - Garrett's Z Fold5 (AVRCP): device removed [ 30936.214] (**) Option "config_info" "udev:/sys/devices/virtual/input/input32/event29" [ 30936.214] (II) XINPUT: Adding extended input device "Garrett's Z Fold5 (AVRCP)" (type: KEYBOARD, id 23) [ 30936.214] (**) Option "xkb_layout" "us" [ 30936.214] (WW) Option "xkb_variant" requires a string value [ 31078.449] (II) config/udev: removing device Garrett's Z Fold5 (AVRCP) [ 31078.449] (II) UnloadModule: "libinput"