[ 10.275] (--) Log file renamed from "/var/log/Xorg.pid-1163.log" to "/var/log/Xorg.0.log" [ 10.275] X.Org X Server 1.21.1.16 X Protocol Version 11, Revision 0 [ 10.275] Current Operating System: Linux XXX 6.13.6-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 07 Mar 2025 20:19:00 +0000 x86_64 [ 10.275] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=HASH_1ED-A3F3-6DE2-9B86-7270D80C9F64 zswap.enabled=0 rootflags=subvol=@ rw rootfstype=btrfs quiet splash NVreg_EnableGpuFirmware=0 [ 10.275] [ 10.275] Current version of pixman: 0.44.2 [ 10.275] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 10.275] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 10.275] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 13 09:37:04 2025 [ 10.276] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 10.276] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 10.276] (==) No Layout section. Using the first Screen section. [ 10.276] (==) No screen section available. Using defaults. [ 10.276] (**) |-->Screen "Default Screen Section" (0) [ 10.276] (**) | |-->Monitor "<default monitor>" [ 10.276] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 10.276] (**) Allowing byte-swapped clients [ 10.276] (==) Automatically adding devices [ 10.276] (==) Automatically enabling devices [ 10.276] (==) Automatically adding GPU devices [ 10.276] (==) Automatically binding GPU devices [ 10.276] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 10.276] (WW) The directory "/usr/share/fonts/misc" does not exist. [ 10.276] Entry deleted from font path. [ 10.276] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF". [ 10.276] Entry deleted from font path. [ 10.276] (Run 'mkfontdir' on "/usr/share/fonts/TTF"). [ 10.276] (WW) The directory "/usr/share/fonts/OTF" does not exist. [ 10.276] Entry deleted from font path. [ 10.276] (WW) The directory "/usr/share/fonts/Type1" does not exist. [ 10.276] Entry deleted from font path. [ 10.276] (WW) The directory "/usr/share/fonts/100dpi" does not exist. [ 10.276] Entry deleted from font path. [ 10.276] (WW) The directory "/usr/share/fonts/75dpi" does not exist. [ 10.276] Entry deleted from font path. [ 10.276] (==) FontPath set to: [ 10.276] (==) ModulePath set to "/usr/lib/xorg/modules" [ 10.276] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 10.276] (II) Module ABI versions: [ 10.276] X.Org ANSI C Emulation: 0.4 [ 10.276] X.Org Video Driver: 25.2 [ 10.276] X.Org XInput driver : 24.4 [ 10.276] X.Org Server Extension : 10.0 [ 10.276] (++) using VT number 2 [ 10.276] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 10.277] (II) xfree86: Adding drm device (/dev/dri/card1) [ 10.277] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 [ 10.278] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules" [ 10.278] (--) PCI:*(1@0:0:0) 10de:2702:1462:511c rev 161, Mem @ 0x40000000/16777216, 0x4000000000/17179869184, 0x4400000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288 [ 10.278] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 10.278] (II) LoadModule: "glx" [ 10.279] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 10.282] (II) Module glx: vendor="X.Org Foundation" [ 10.282] compiled for 1.21.1.16, module version = 1.0.0 [ 10.282] ABI class: X.Org Server Extension, version 10.0 [ 10.282] (II) Applying OutputClass "nvidia" to /dev/dri/card1 [ 10.282] loading driver: nvidia [ 10.282] (==) Matched nvidia as autoconfigured driver 0 [ 10.282] (==) Matched nouveau as autoconfigured driver 1 [ 10.282] (==) Matched nv as autoconfigured driver 2 [ 10.282] (==) Matched modesetting as autoconfigured driver 3 [ 10.282] (==) Matched fbdev as autoconfigured driver 4 [ 10.282] (==) Matched vesa as autoconfigured driver 5 [ 10.282] (==) Assigned the driver to the xf86ConfigLayout [ 10.282] (II) LoadModule: "nvidia" [ 10.282] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 10.288] (II) Module nvidia: vendor="NVIDIA Corporation" [ 10.288] compiled for 1.6.99.901, module version = 1.0.0 [ 10.288] Module class: X.Org Video Driver [ 10.288] (II) LoadModule: "nouveau" [ 10.288] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 10.289] (II) Module nouveau: vendor="X.Org Foundation" [ 10.289] compiled for 1.21.1.14, module version = 1.0.18 [ 10.289] Module class: X.Org Video Driver [ 10.289] ABI class: X.Org Video Driver, version 25.2 [ 10.289] (II) LoadModule: "nv" [ 10.289] (WW) Warning, couldn't open module nv [ 10.289] (EE) Failed to load module "nv" (module does not exist, 0) [ 10.289] (II) LoadModule: "modesetting" [ 10.289] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 10.290] (II) Module modesetting: vendor="X.Org Foundation" [ 10.290] compiled for 1.21.1.16, module version = 1.21.1 [ 10.290] Module class: X.Org Video Driver [ 10.290] ABI class: X.Org Video Driver, version 25.2 [ 10.290] (II) LoadModule: "fbdev" [ 10.290] (WW) Warning, couldn't open module fbdev [ 10.290] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 10.290] (II) LoadModule: "vesa" [ 10.290] (WW) Warning, couldn't open module vesa [ 10.290] (EE) Failed to load module "vesa" (module does not exist, 0) [ 10.290] (II) NVIDIA dlloader X Driver 570.124.04 Tue Feb 25 03:40:59 UTC 2025 [ 10.290] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 10.290] (II) NOUVEAU driver [ 10.290] (II) NOUVEAU driver for NVIDIA chipset families : [ 10.290] RIVA TNT (NV04) [ 10.290] RIVA TNT2 (NV05) [ 10.290] GeForce 256 (NV10) [ 10.290] GeForce 2 (NV11, NV15) [ 10.290] GeForce 4MX (NV17, NV18) [ 10.290] GeForce 3 (NV20) [ 10.290] GeForce 4Ti (NV25, NV28) [ 10.290] GeForce FX (NV3x) [ 10.290] GeForce 6 (NV4x) [ 10.290] GeForce 7 (G7x) [ 10.290] GeForce 8 (G8x) [ 10.290] GeForce 9 (G9x) [ 10.290] GeForce GTX 2xx/3xx (GT2xx) [ 10.290] GeForce GTX 4xx/5xx (GFxxx) [ 10.290] GeForce GTX 6xx/7xx (GKxxx) [ 10.290] GeForce GTX 9xx (GMxxx) [ 10.290] GeForce GTX 10xx (GPxxx) [ 10.290] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 10.290] (II) Loading sub module "fb" [ 10.290] (II) LoadModule: "fb" [ 10.291] (II) Module "fb" already built-in [ 10.291] (II) Loading sub module "wfb" [ 10.291] (II) LoadModule: "wfb" [ 10.291] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 10.291] (II) Module wfb: vendor="X.Org Foundation" [ 10.291] compiled for 1.21.1.16, module version = 1.0.0 [ 10.291] ABI class: X.Org ANSI C Emulation, version 0.4 [ 10.291] (WW) Falling back to old probe method for modesetting [ 10.291] (EE) open /dev/dri/card0: No such file or directory [ 10.291] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 10.291] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32 [ 10.291] (==) NVIDIA(0): RGB weight 888 [ 10.291] (==) NVIDIA(0): Default visual is TrueColor [ 10.291] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 10.291] (II) Applying OutputClass "nvidia" options to /dev/dri/card1 [ 10.291] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" [ 10.291] (**) NVIDIA(0): Enabling 2D acceleration [ 10.291] (II) Loading sub module "glxserver_nvidia" [ 10.291] (II) LoadModule: "glxserver_nvidia" [ 10.291] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so [ 10.337] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation" [ 10.337] compiled for 1.6.99.901, module version = 1.0.0 [ 10.337] Module class: X.Org Server Extension [ 10.337] (II) NVIDIA GLX Module 570.124.04 Tue Feb 25 03:45:00 UTC 2025 [ 10.337] (II) NVIDIA: The X server supports PRIME Render Offload. [ 10.339] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0 [ 10.339] (--) NVIDIA(0): DFP-0 [ 10.339] (--) NVIDIA(0): DFP-1 [ 10.339] (--) NVIDIA(0): DFP-2 [ 10.339] (--) NVIDIA(0): DFP-3 (boot) [ 10.339] (--) NVIDIA(0): DFP-4 [ 10.339] (--) NVIDIA(0): DFP-5 [ 10.339] (--) NVIDIA(0): DFP-6 [ 10.344] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 4080 SUPER (AD103-A) at [ 10.344] (II) NVIDIA(0): PCI:1:0:0 (GPU-0) [ 10.344] (--) NVIDIA(0): Memory: 16769024 kBytes [ 10.344] (--) NVIDIA(0): VideoBIOS: 95.03.44.40.3e [ 10.344] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 10.393] (--) NVIDIA(GPU-0): DFP-0: disconnected [ 10.393] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS [ 10.393] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock [ 10.393] (--) NVIDIA(GPU-0): [ 10.393] (--) NVIDIA(GPU-0): DFP-1: disconnected [ 10.393] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort [ 10.393] (--) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock [ 10.393] (--) NVIDIA(GPU-0): [ 10.394] (--) NVIDIA(GPU-0): DFP-2: disconnected [ 10.394] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS [ 10.394] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock [ 10.394] (--) NVIDIA(GPU-0): [ 10.395] (--) NVIDIA(GPU-0): Dell AW3423DW (DFP-3): connected [ 10.395] (--) NVIDIA(GPU-0): Dell AW3423DW (DFP-3): Internal DisplayPort [ 10.395] (--) NVIDIA(GPU-0): Dell AW3423DW (DFP-3): 2670.0 MHz maximum pixel clock [ 10.395] (--) NVIDIA(GPU-0): [ 10.399] (--) NVIDIA(GPU-0): DFP-4: disconnected [ 10.399] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS [ 10.399] (--) NVIDIA(GPU-0): DFP-4: 165.0 MHz maximum pixel clock [ 10.399] (--) NVIDIA(GPU-0): [ 10.399] (--) NVIDIA(GPU-0): DFP-5: disconnected [ 10.399] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort [ 10.399] (--) NVIDIA(GPU-0): DFP-5: 2670.0 MHz maximum pixel clock [ 10.399] (--) NVIDIA(GPU-0): [ 10.399] (--) NVIDIA(GPU-0): DFP-6: disconnected [ 10.399] (--) NVIDIA(GPU-0): DFP-6: Internal TMDS [ 10.399] (--) NVIDIA(GPU-0): DFP-6: 165.0 MHz maximum pixel clock [ 10.399] (--) NVIDIA(GPU-0): [ 10.406] (==) NVIDIA(0): [ 10.406] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 10.406] (==) NVIDIA(0): will be used as the requested mode. [ 10.406] (==) NVIDIA(0): [ 10.408] (II) NVIDIA(0): Validated MetaModes: [ 10.408] (II) NVIDIA(0): "DFP-3:nvidia-auto-select" [ 10.408] (II) NVIDIA(0): Virtual screen size determined to be 3440 x 1440 [ 10.480] (--) NVIDIA(0): DPI set to (107, 104); computed from "UseEdidDpi" X config [ 10.480] (--) NVIDIA(0): option [ 10.480] (II) UnloadModule: "nouveau" [ 10.480] (II) Unloading nouveau [ 10.480] (II) UnloadModule: "modesetting" [ 10.480] (II) Unloading modesetting [ 10.482] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory [ 10.482] (II) NVIDIA: access. [ 10.487] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon [ 10.487] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X [ 10.487] (II) NVIDIA(0): configuration option may not be set correctly. When the [ 10.487] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will [ 10.487] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For [ 10.487] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and [ 10.487] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X [ 10.487] (II) NVIDIA(0): Config Options in the README. [ 10.504] (II) NVIDIA(0): Setting mode "DFP-3:nvidia-auto-select" [ 10.598] (==) NVIDIA(0): Disabling shared memory pixmaps [ 10.598] (==) NVIDIA(0): Backing store enabled [ 10.598] (==) NVIDIA(0): Silken mouse enabled [ 10.598] (==) NVIDIA(0): DPMS enabled [ 10.599] (II) Loading sub module "dri2" [ 10.599] (II) LoadModule: "dri2" [ 10.599] (II) Module "dri2" already built-in [ 10.599] (II) NVIDIA(0): [DRI2] Setup complete [ 10.599] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 10.599] (II) Initializing extension Generic Event Extension [ 10.599] (II) Initializing extension SHAPE [ 10.599] (II) Initializing extension MIT-SHM [ 10.599] (II) Initializing extension XInputExtension [ 10.599] (II) Initializing extension XTEST [ 10.599] (II) Initializing extension BIG-REQUESTS [ 10.599] (II) Initializing extension SYNC [ 10.599] (II) Initializing extension XKEYBOARD [ 10.599] (II) Initializing extension XC-MISC [ 10.599] (II) Initializing extension SECURITY [ 10.599] (II) Initializing extension XFIXES [ 10.599] (II) Initializing extension RENDER [ 10.599] (II) Initializing extension RANDR [ 10.599] (II) Initializing extension COMPOSITE [ 10.599] (II) Initializing extension DAMAGE [ 10.599] (II) Initializing extension MIT-SCREEN-SAVER [ 10.599] (II) Initializing extension DOUBLE-BUFFER [ 10.599] (II) Initializing extension RECORD [ 10.599] (II) Initializing extension DPMS [ 10.599] (II) Initializing extension Present [ 10.600] (II) Initializing extension DRI3 [ 10.600] (II) Initializing extension X-Resource [ 10.600] (II) Initializing extension XVideo [ 10.600] (II) Initializing extension XVideo-MotionCompensation [ 10.600] (II) Initializing extension GLX [ 10.600] (II) Initializing extension GLX [ 10.600] (II) Indirect GLX disabled. [ 10.600] (II) GLX: Another vendor is already registered for screen 0 [ 10.600] (II) Initializing extension XFree86-VidModeExtension [ 10.600] (II) Initializing extension XFree86-DGA [ 10.600] (II) Initializing extension XFree86-DRI [ 10.600] (II) Initializing extension DRI2 [ 10.600] (II) Initializing extension NV-GLX [ 10.600] (II) Initializing extension NV-CONTROL [ 10.600] (II) Initializing extension XINERAMA [ 10.645] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 10.645] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 10.645] (**) Power Button: Applying InputClass "system-keyboard" [ 10.645] (II) LoadModule: "libinput" [ 10.645] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 10.648] (II) Module libinput: vendor="X.Org Foundation" [ 10.648] compiled for 1.21.1.13, module version = 1.5.0 [ 10.648] Module class: X.Org XInput Driver [ 10.648] ABI class: X.Org XInput driver, version 24.4 [ 10.648] (II) Using input driver 'libinput' for 'Power Button' [ 10.648] (**) Power Button: always reports core events [ 10.648] (**) Option "Device" "/dev/input/event2" [ 10.650] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 10.650] (II) event2 - Power Button: device is a keyboard [ 10.650] (II) event2 - Power Button: device removed [ 10.665] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 10.665] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 10.665] (**) Option "xkb_model" "pc105+inet" [ 10.665] (**) Option "xkb_layout" "us" [ 10.665] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 10.673] (II) event2 - Power Button: is tagged by udev as: Keyboard [ 10.673] (II) event2 - Power Button: device is a keyboard [ 10.673] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 10.673] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 10.673] (**) Power Button: Applying InputClass "system-keyboard" [ 10.673] (II) Using input driver 'libinput' for 'Power Button' [ 10.673] (**) Power Button: always reports core events [ 10.673] (**) Option "Device" "/dev/input/event1" [ 10.673] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 10.673] (II) event1 - Power Button: device is a keyboard [ 10.673] (II) event1 - Power Button: device removed [ 10.686] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1" [ 10.686] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 10.686] (**) Option "xkb_model" "pc105+inet" [ 10.686] (**) Option "xkb_layout" "us" [ 10.686] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 10.686] (II) event1 - Power Button: is tagged by udev as: Keyboard [ 10.686] (II) event1 - Power Button: device is a keyboard [ 10.686] (II) config/udev: Adding input device Sleep Button (/dev/input/event0) [ 10.686] (**) Sleep Button: Applying InputClass "libinput keyboard catchall" [ 10.686] (**) Sleep Button: Applying InputClass "system-keyboard" [ 10.686] (II) Using input driver 'libinput' for 'Sleep Button' [ 10.686] (**) Sleep Button: always reports core events [ 10.686] (**) Option "Device" "/dev/input/event0" [ 10.687] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 10.687] (II) event0 - Sleep Button: device is a keyboard [ 10.687] (II) event0 - Sleep Button: device removed [ 10.703] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0" [ 10.703] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8) [ 10.703] (**) Option "xkb_model" "pc105+inet" [ 10.703] (**) Option "xkb_layout" "us" [ 10.703] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 10.703] (II) event0 - Sleep Button: is tagged by udev as: Keyboard [ 10.703] (II) event0 - Sleep Button: device is a keyboard [ 10.704] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event19) [ 10.704] (II) No input driver specified, ignoring this device. [ 10.704] (II) This device may have been added with another device file. [ 10.704] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event20) [ 10.704] (II) No input driver specified, ignoring this device. [ 10.704] (II) This device may have been added with another device file. [ 10.704] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event21) [ 10.704] (II) No input driver specified, ignoring this device. [ 10.704] (II) This device may have been added with another device file. [ 10.704] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event22) [ 10.704] (II) No input driver specified, ignoring this device. [ 10.704] (II) This device may have been added with another device file. [ 10.705] (II) config/udev: Adding input device Keychron Keychron Q3 Max (/dev/input/event8) [ 10.705] (**) Keychron Keychron Q3 Max: Applying InputClass "libinput keyboard catchall" [ 10.705] (**) Keychron Keychron Q3 Max: Applying InputClass "system-keyboard" [ 10.705] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max' [ 10.705] (**) Keychron Keychron Q3 Max: always reports core events [ 10.705] (**) Option "Device" "/dev/input/event8" [ 10.706] (II) event8 - Keychron Keychron Q3 Max: is tagged by udev as: Keyboard [ 10.706] (II) event8 - Keychron Keychron Q3 Max: device is a keyboard [ 10.706] (II) event8 - Keychron Keychron Q3 Max: device removed [ 10.719] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.0/0003:3434:0830.0006/input/input9/event8" [ 10.719] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max" (type: KEYBOARD, id 9) [ 10.719] (**) Option "xkb_model" "pc105+inet" [ 10.719] (**) Option "xkb_layout" "us" [ 10.719] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 10.720] (II) event8 - Keychron Keychron Q3 Max: is tagged by udev as: Keyboard [ 10.720] (II) event8 - Keychron Keychron Q3 Max: device is a keyboard [ 10.721] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/event9) [ 10.721] (**) Keychron Keychron Q3 Max Mouse: Applying InputClass "libinput pointer catchall" [ 10.721] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Mouse' [ 10.721] (**) Keychron Keychron Q3 Max Mouse: always reports core events [ 10.721] (**) Option "Device" "/dev/input/event9" [ 10.722] (II) event9 - Keychron Keychron Q3 Max Mouse: is tagged by udev as: Mouse [ 10.722] (II) event9 - Keychron Keychron Q3 Max Mouse: device is a pointer [ 10.722] (II) event9 - Keychron Keychron Q3 Max Mouse: device removed [ 10.755] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.755] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.755] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.755] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0008/input/input10/event9" [ 10.755] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Mouse" (type: MOUSE, id 10) [ 10.755] (**) Option "AccelerationScheme" "none" [ 10.755] (**) Keychron Keychron Q3 Max Mouse: (accel) selected scheme none/0 [ 10.755] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration factor: 2.000 [ 10.755] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration threshold: 4 [ 10.760] (II) event9 - Keychron Keychron Q3 Max Mouse: is tagged by udev as: Mouse [ 10.760] (II) event9 - Keychron Keychron Q3 Max Mouse: device is a pointer [ 10.762] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/mouse0) [ 10.763] (II) No input driver specified, ignoring this device. [ 10.763] (II) This device may have been added with another device file. [ 10.765] (II) config/udev: Adding input device Keychron Keychron Q3 Max System Control (/dev/input/event10) [ 10.765] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "libinput keyboard catchall" [ 10.765] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "system-keyboard" [ 10.765] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max System Control' [ 10.765] (**) Keychron Keychron Q3 Max System Control: always reports core events [ 10.765] (**) Option "Device" "/dev/input/event10" [ 10.769] (II) event10 - Keychron Keychron Q3 Max System Control: is tagged by udev as: Keyboard Joystick [ 10.769] (II) event10 - Keychron Keychron Q3 Max System Control: device is a keyboard [ 10.770] (II) event10 - Keychron Keychron Q3 Max System Control: device removed [ 10.783] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0008/input/input11/event10" [ 10.783] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max System Control" (type: KEYBOARD, id 11) [ 10.783] (**) Option "xkb_model" "pc105+inet" [ 10.783] (**) Option "xkb_layout" "us" [ 10.783] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 10.787] (II) event10 - Keychron Keychron Q3 Max System Control: is tagged by udev as: Keyboard Joystick [ 10.788] (II) event10 - Keychron Keychron Q3 Max System Control: device is a keyboard [ 10.791] (II) config/udev: Adding input device Keychron Keychron Q3 Max Consumer Control (/dev/input/event11) [ 10.791] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 10.791] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 10.791] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 10.791] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 10.791] (**) Option "Device" "/dev/input/event11" [ 10.795] (II) event11 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 10.795] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 10.796] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device removed [ 10.812] (II) libinput: Keychron Keychron Q3 Max Consumer Control: needs a virtual subdevice [ 10.812] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0008/input/input12/event11" [ 10.812] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: MOUSE, id 12) [ 10.812] (**) Option "AccelerationScheme" "none" [ 10.812] (**) Keychron Keychron Q3 Max Consumer Control: (accel) selected scheme none/0 [ 10.812] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration factor: 2.000 [ 10.812] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration threshold: 4 [ 10.816] (II) event11 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 10.817] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 10.819] (II) config/udev: Adding input device Keychron Keychron Q3 Max Keyboard (/dev/input/event12) [ 10.820] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "libinput keyboard catchall" [ 10.820] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "system-keyboard" [ 10.820] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Keyboard' [ 10.820] (**) Keychron Keychron Q3 Max Keyboard: always reports core events [ 10.820] (**) Option "Device" "/dev/input/event12" [ 10.824] (II) event12 - Keychron Keychron Q3 Max Keyboard: is tagged by udev as: Keyboard [ 10.824] (II) event12 - Keychron Keychron Q3 Max Keyboard: device is a keyboard [ 10.825] (II) event12 - Keychron Keychron Q3 Max Keyboard: device removed [ 10.843] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0008/input/input13/event12" [ 10.843] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Keyboard" (type: KEYBOARD, id 13) [ 10.843] (**) Option "xkb_model" "pc105+inet" [ 10.843] (**) Option "xkb_layout" "us" [ 10.843] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 10.847] (II) event12 - Keychron Keychron Q3 Max Keyboard: is tagged by udev as: Keyboard [ 10.848] (II) event12 - Keychron Keychron Q3 Max Keyboard: device is a keyboard [ 10.851] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller (/dev/input/event5) [ 10.851] (II) No input driver specified, ignoring this device. [ 10.851] (II) This device may have been added with another device file. [ 10.853] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller (/dev/input/js0) [ 10.853] (II) No input driver specified, ignoring this device. [ 10.853] (II) This device may have been added with another device file. [ 10.855] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller Motion Sensors (/dev/input/event7) [ 10.855] (II) No input driver specified, ignoring this device. [ 10.855] (II) This device may have been added with another device file. [ 10.857] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller Motion Sensors (/dev/input/js1) [ 10.857] (II) No input driver specified, ignoring this device. [ 10.857] (II) This device may have been added with another device file. [ 10.859] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller Touchpad (/dev/input/event13) [ 10.859] (**) Sony Interactive Entertainment DualSense Wireless Controller Touchpad: Applying InputClass "libinput touchpad catchall" [ 10.859] (II) Using input driver 'libinput' for 'Sony Interactive Entertainment DualSense Wireless Controller Touchpad' [ 10.859] (**) Sony Interactive Entertainment DualSense Wireless Controller Touchpad: always reports core events [ 10.859] (**) Option "Device" "/dev/input/event13" [ 10.860] (II) event13 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: is tagged by udev as: Touchpad [ 10.860] (II) event13 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: no resolution or size hints, assuming a size of 69x50mm [ 10.861] (II) event13 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: device is a touchpad [ 10.861] (II) event13 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: device removed [ 10.889] (II) libinput: Sony Interactive Entertainment DualSense Wireless Controller Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.889] (II) libinput: Sony Interactive Entertainment DualSense Wireless Controller Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.889] (II) libinput: Sony Interactive Entertainment DualSense Wireless Controller Touchpad: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.889] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.3/1-5.1.3:1.3/0003:054C:0CE6.0009/input/input27/event13" [ 10.889] (II) XINPUT: Adding extended input device "Sony Interactive Entertainment DualSense Wireless Controller Touchpad" (type: TOUCHPAD, id 14) [ 10.889] (**) Option "AccelerationScheme" "none" [ 10.889] (**) Sony Interactive Entertainment DualSense Wireless Controller Touchpad: (accel) selected scheme none/0 [ 10.889] (**) Sony Interactive Entertainment DualSense Wireless Controller Touchpad: (accel) acceleration factor: 2.000 [ 10.889] (**) Sony Interactive Entertainment DualSense Wireless Controller Touchpad: (accel) acceleration threshold: 4 [ 10.890] (II) event13 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: is tagged by udev as: Touchpad [ 10.890] (II) event13 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: no resolution or size hints, assuming a size of 69x50mm [ 10.891] (II) event13 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: device is a touchpad [ 10.892] (II) config/udev: Adding input device Sony Interactive Entertainment DualSense Wireless Controller Touchpad (/dev/input/mouse2) [ 10.892] (II) No input driver specified, ignoring this device. [ 10.892] (II) This device may have been added with another device file. [ 10.892] (II) config/udev: Adding input device Keychron Keychron Q0 Plus (/dev/input/event14) [ 10.892] (**) Keychron Keychron Q0 Plus: Applying InputClass "libinput keyboard catchall" [ 10.892] (**) Keychron Keychron Q0 Plus: Applying InputClass "system-keyboard" [ 10.892] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus' [ 10.892] (**) Keychron Keychron Q0 Plus: always reports core events [ 10.892] (**) Option "Device" "/dev/input/event14" [ 10.893] (II) event14 - Keychron Keychron Q0 Plus: is tagged by udev as: Keyboard [ 10.893] (II) event14 - Keychron Keychron Q0 Plus: device is a keyboard [ 10.893] (II) event14 - Keychron Keychron Q0 Plus: device removed [ 10.907] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.0/0003:3434:0131.000B/input/input15/event14" [ 10.907] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus" (type: KEYBOARD, id 15) [ 10.907] (**) Option "xkb_model" "pc105+inet" [ 10.907] (**) Option "xkb_layout" "us" [ 10.907] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 10.908] (II) event14 - Keychron Keychron Q0 Plus: is tagged by udev as: Keyboard [ 10.908] (II) event14 - Keychron Keychron Q0 Plus: device is a keyboard [ 10.908] (II) config/udev: Adding input device Keychron Keychron Q0 Plus Mouse (/dev/input/event15) [ 10.908] (**) Keychron Keychron Q0 Plus Mouse: Applying InputClass "libinput pointer catchall" [ 10.908] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus Mouse' [ 10.908] (**) Keychron Keychron Q0 Plus Mouse: always reports core events [ 10.908] (**) Option "Device" "/dev/input/event15" [ 10.909] (II) event15 - Keychron Keychron Q0 Plus Mouse: is tagged by udev as: Mouse [ 10.909] (II) event15 - Keychron Keychron Q0 Plus Mouse: device is a pointer [ 10.909] (II) event15 - Keychron Keychron Q0 Plus Mouse: device removed [ 10.935] (II) libinput: Keychron Keychron Q0 Plus Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.935] (II) libinput: Keychron Keychron Q0 Plus Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.935] (II) libinput: Keychron Keychron Q0 Plus Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 10.935] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.2/0003:3434:0131.000D/input/input16/event15" [ 10.935] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus Mouse" (type: MOUSE, id 16) [ 10.935] (**) Option "AccelerationScheme" "none" [ 10.935] (**) Keychron Keychron Q0 Plus Mouse: (accel) selected scheme none/0 [ 10.935] (**) Keychron Keychron Q0 Plus Mouse: (accel) acceleration factor: 2.000 [ 10.935] (**) Keychron Keychron Q0 Plus Mouse: (accel) acceleration threshold: 4 [ 10.936] (II) event15 - Keychron Keychron Q0 Plus Mouse: is tagged by udev as: Mouse [ 10.936] (II) event15 - Keychron Keychron Q0 Plus Mouse: device is a pointer [ 10.937] (II) config/udev: Adding input device Keychron Keychron Q0 Plus Mouse (/dev/input/mouse1) [ 10.937] (II) No input driver specified, ignoring this device. [ 10.937] (II) This device may have been added with another device file. [ 10.938] (II) config/udev: Adding input device Keychron Keychron Q0 Plus System Control (/dev/input/event16) [ 10.938] (**) Keychron Keychron Q0 Plus System Control: Applying InputClass "libinput keyboard catchall" [ 10.938] (**) Keychron Keychron Q0 Plus System Control: Applying InputClass "system-keyboard" [ 10.938] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus System Control' [ 10.938] (**) Keychron Keychron Q0 Plus System Control: always reports core events [ 10.938] (**) Option "Device" "/dev/input/event16" [ 10.940] (II) event16 - Keychron Keychron Q0 Plus System Control: is tagged by udev as: Keyboard Joystick [ 10.940] (II) event16 - Keychron Keychron Q0 Plus System Control: device is a keyboard [ 10.940] (II) event16 - Keychron Keychron Q0 Plus System Control: device removed [ 10.954] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.2/0003:3434:0131.000D/input/input17/event16" [ 10.954] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus System Control" (type: KEYBOARD, id 17) [ 10.954] (**) Option "xkb_model" "pc105+inet" [ 10.954] (**) Option "xkb_layout" "us" [ 10.954] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 10.957] (II) event16 - Keychron Keychron Q0 Plus System Control: is tagged by udev as: Keyboard Joystick [ 10.957] (II) event16 - Keychron Keychron Q0 Plus System Control: device is a keyboard [ 10.959] (II) config/udev: Adding input device Keychron Keychron Q0 Plus Consumer Control (/dev/input/event17) [ 10.959] (**) Keychron Keychron Q0 Plus Consumer Control: Applying InputClass "libinput keyboard catchall" [ 10.959] (**) Keychron Keychron Q0 Plus Consumer Control: Applying InputClass "system-keyboard" [ 10.959] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus Consumer Control' [ 10.959] (**) Keychron Keychron Q0 Plus Consumer Control: always reports core events [ 10.959] (**) Option "Device" "/dev/input/event17" [ 10.963] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: is tagged by udev as: Keyboard [ 10.963] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: device is a keyboard [ 10.963] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: device removed [ 10.981] (II) libinput: Keychron Keychron Q0 Plus Consumer Control: needs a virtual subdevice [ 10.981] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.2/0003:3434:0131.000D/input/input18/event17" [ 10.981] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus Consumer Control" (type: MOUSE, id 18) [ 10.981] (**) Option "AccelerationScheme" "none" [ 10.981] (**) Keychron Keychron Q0 Plus Consumer Control: (accel) selected scheme none/0 [ 10.981] (**) Keychron Keychron Q0 Plus Consumer Control: (accel) acceleration factor: 2.000 [ 10.981] (**) Keychron Keychron Q0 Plus Consumer Control: (accel) acceleration threshold: 4 [ 10.986] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: is tagged by udev as: Keyboard [ 10.986] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: device is a keyboard [ 10.989] (II) config/udev: Adding input device Keychron Keychron Q0 Plus Keyboard (/dev/input/event18) [ 10.989] (**) Keychron Keychron Q0 Plus Keyboard: Applying InputClass "libinput keyboard catchall" [ 10.989] (**) Keychron Keychron Q0 Plus Keyboard: Applying InputClass "system-keyboard" [ 10.989] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus Keyboard' [ 10.989] (**) Keychron Keychron Q0 Plus Keyboard: always reports core events [ 10.989] (**) Option "Device" "/dev/input/event18" [ 10.993] (II) event18 - Keychron Keychron Q0 Plus Keyboard: is tagged by udev as: Keyboard [ 10.993] (II) event18 - Keychron Keychron Q0 Plus Keyboard: device is a keyboard [ 10.994] (II) event18 - Keychron Keychron Q0 Plus Keyboard: device removed [ 11.010] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.2/0003:3434:0131.000D/input/input19/event18" [ 11.010] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus Keyboard" (type: KEYBOARD, id 19) [ 11.010] (**) Option "xkb_model" "pc105+inet" [ 11.010] (**) Option "xkb_layout" "us" [ 11.010] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 11.014] (II) event18 - Keychron Keychron Q0 Plus Keyboard: is tagged by udev as: Keyboard [ 11.015] (II) event18 - Keychron Keychron Q0 Plus Keyboard: device is a keyboard [ 11.018] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/event4) [ 11.018] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 11.018] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 11.018] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 11.018] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 11.018] (**) Logitech MX Ergo: always reports core events [ 11.018] (**) Option "Device" "/dev/input/event4" [ 11.022] (II) event4 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 11.023] (II) event4 - Logitech MX Ergo: device set to 380 DPI [ 11.023] (II) event4 - Logitech MX Ergo: device is a pointer [ 11.023] (II) event4 - Logitech MX Ergo: device is a keyboard [ 11.024] (II) event4 - Logitech MX Ergo: device removed [ 11.040] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.040] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.040] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.040] (II) libinput: Logitech MX Ergo: needs a virtual subdevice [ 11.040] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0005/0003:046D:406F.0010/input/input28/event4" [ 11.040] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: MOUSE, id 20) [ 11.040] (**) Option "AccelerationScheme" "none" [ 11.040] (**) Logitech MX Ergo: (accel) selected scheme none/0 [ 11.040] (**) Logitech MX Ergo: (accel) acceleration factor: 2.000 [ 11.040] (**) Logitech MX Ergo: (accel) acceleration threshold: 4 [ 11.045] (II) event4 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 11.045] (II) event4 - Logitech MX Ergo: device set to 380 DPI [ 11.045] (II) event4 - Logitech MX Ergo: device is a pointer [ 11.045] (II) event4 - Logitech MX Ergo: device is a keyboard [ 11.048] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/mouse3) [ 11.048] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 11.048] (II) No input driver specified, ignoring this device. [ 11.048] (II) This device may have been added with another device file. [ 11.050] (II) config/udev: Adding input device Yubico YubiKey OTP+FIDO+CCID (/dev/input/event3) [ 11.050] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "libinput keyboard catchall" [ 11.050] (**) Yubico YubiKey OTP+FIDO+CCID: Applying InputClass "system-keyboard" [ 11.050] (II) Using input driver 'libinput' for 'Yubico YubiKey OTP+FIDO+CCID' [ 11.050] (**) Yubico YubiKey OTP+FIDO+CCID: always reports core events [ 11.050] (**) Option "Device" "/dev/input/event3" [ 11.054] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard [ 11.054] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard [ 11.055] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: device removed [ 11.069] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:1050:0407.0001/input/input3/event3" [ 11.069] (II) XINPUT: Adding extended input device "Yubico YubiKey OTP+FIDO+CCID" (type: KEYBOARD, id 21) [ 11.069] (**) Option "xkb_model" "pc105+inet" [ 11.069] (**) Option "xkb_layout" "us" [ 11.069] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 11.073] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: is tagged by udev as: Keyboard [ 11.073] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: device is a keyboard [ 11.075] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event23) [ 11.075] (II) No input driver specified, ignoring this device. [ 11.075] (II) This device may have been added with another device file. [ 11.076] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event24) [ 11.076] (II) No input driver specified, ignoring this device. [ 11.076] (II) This device may have been added with another device file. [ 11.077] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event25) [ 11.077] (II) No input driver specified, ignoring this device. [ 11.077] (II) This device may have been added with another device file. [ 11.078] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event26) [ 11.078] (II) No input driver specified, ignoring this device. [ 11.078] (II) This device may have been added with another device file. [ 11.079] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event27) [ 11.079] (II) No input driver specified, ignoring this device. [ 11.079] (II) This device may have been added with another device file. [ 11.080] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event28) [ 11.080] (II) No input driver specified, ignoring this device. [ 11.080] (II) This device may have been added with another device file. [ 11.080] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event29) [ 11.081] (II) No input driver specified, ignoring this device. [ 11.081] (II) This device may have been added with another device file. [ 11.082] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 11.082] (II) No input driver specified, ignoring this device. [ 11.082] (II) This device may have been added with another device file. [ 11.094] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 11.095] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 11.095] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 11.095] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 11.095] (**) Option "Device" "/dev/input/event11" [ 11.095] (II) libinput: Keychron Keychron Q3 Max Consumer Control: is a virtual subdevice [ 11.095] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0008/input/input12/event11" [ 11.095] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: KEYBOARD, id 22) [ 11.095] (**) Option "xkb_model" "pc105+inet" [ 11.095] (**) Option "xkb_layout" "us" [ 11.095] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 11.095] (**) Keychron Keychron Q0 Plus Consumer Control: Applying InputClass "libinput keyboard catchall" [ 11.095] (**) Keychron Keychron Q0 Plus Consumer Control: Applying InputClass "system-keyboard" [ 11.095] (II) Using input driver 'libinput' for 'Keychron Keychron Q0 Plus Consumer Control' [ 11.095] (**) Keychron Keychron Q0 Plus Consumer Control: always reports core events [ 11.095] (**) Option "Device" "/dev/input/event17" [ 11.095] (II) libinput: Keychron Keychron Q0 Plus Consumer Control: is a virtual subdevice [ 11.095] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.4/1-5.1.4:1.2/0003:3434:0131.000D/input/input18/event17" [ 11.095] (II) XINPUT: Adding extended input device "Keychron Keychron Q0 Plus Consumer Control" (type: KEYBOARD, id 23) [ 11.095] (**) Option "xkb_model" "pc105+inet" [ 11.095] (**) Option "xkb_layout" "us" [ 11.095] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 11.095] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 11.095] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 11.095] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 11.095] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 11.095] (**) Logitech MX Ergo: always reports core events [ 11.095] (**) Option "Device" "/dev/input/event4" [ 11.095] (II) libinput: Logitech MX Ergo: is a virtual subdevice [ 11.095] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.095] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.095] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11.095] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0005/0003:046D:406F.0010/input/input28/event4" [ 11.095] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: KEYBOARD, id 24) [ 11.095] (**) Option "xkb_model" "pc105+inet" [ 11.095] (**) Option "xkb_layout" "us" [ 11.095] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 22.579] (II) event2 - Power Button: device removed [ 22.590] (II) event1 - Power Button: device removed [ 22.602] (II) event0 - Sleep Button: device removed [ 22.610] (II) event8 - Keychron Keychron Q3 Max: device removed [ 22.618] (II) event9 - Keychron Keychron Q3 Max Mouse: device removed [ 22.630] (II) event10 - Keychron Keychron Q3 Max System Control: device removed [ 22.639] (II) event12 - Keychron Keychron Q3 Max Keyboard: device removed [ 22.651] (II) event13 - Sony Interactive Entertainment DualSense Wireless Controller Touchpad: device removed [ 22.667] (II) event14 - Keychron Keychron Q0 Plus: device removed [ 22.679] (II) event15 - Keychron Keychron Q0 Plus Mouse: device removed [ 22.705] (II) event16 - Keychron Keychron Q0 Plus System Control: device removed [ 22.717] (II) event18 - Keychron Keychron Q0 Plus Keyboard: device removed [ 22.733] (II) event3 - Yubico YubiKey OTP+FIDO+CCID: device removed [ 22.749] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device removed [ 22.758] (II) event17 - Keychron Keychron Q0 Plus Consumer Control: device removed [ 22.774] (II) event4 - Logitech MX Ergo: device removed [ 28.215] (II) config/udev: Adding input device Mouse passthrough (/dev/input/mouse4) [ 28.215] (II) No input driver specified, ignoring this device. [ 28.215] (II) This device may have been added with another device file. [ 28.216] (II) config/udev: Adding input device Wolf mouse (abs) virtual device (/dev/input/js2) [ 28.216] (II) No input driver specified, ignoring this device. [ 28.216] (II) This device may have been added with another device file. [ 28.216] (II) config/udev: Adding input device Wolf mouse (abs) virtual device (/dev/input/mouse5) [ 28.216] (II) No input driver specified, ignoring this device. [ 28.216] (II) This device may have been added with another device file. [ 28.217] (II) config/udev: Adding input device Sunshine X-Box One (virtual) pad (/dev/input/js4) [ 28.217] (II) No input driver specified, ignoring this device. [ 28.217] (II) This device may have been added with another device file. [ 28.217] (II) config/udev: Adding input device Sunshine Nintendo (virtual) pad (/dev/input/js3) [ 28.217] (II) No input driver specified, ignoring this device. [ 28.217] (II) This device may have been added with another device file. [ 28.231] (II) config/udev: Adding input device Wolf mouse (abs) virtual device (/dev/input/event31) [ 28.231] (**) Wolf mouse (abs) virtual device: Applying InputClass "libinput pointer catchall" [ 28.231] (II) Using input driver 'libinput' for 'Wolf mouse (abs) virtual device' [ 28.231] (**) Wolf mouse (abs) virtual device: always reports core events [ 28.231] (**) Option "Device" "/dev/input/event31" [ 28.231] (II) event31 - Wolf mouse (abs) virtual device: is tagged by udev as: Mouse [ 28.231] (II) event31 - Wolf mouse (abs) virtual device: device is a pointer [ 28.231] (II) event31 - Wolf mouse (abs) virtual device: device removed [ 28.246] (**) Option "config_info" "udev:/sys/devices/virtual/input/input42/event31" [ 28.246] (II) XINPUT: Adding extended input device "Wolf mouse (abs) virtual device" (type: MOUSE, id 25) [ 28.246] (**) Option "AccelerationScheme" "none" [ 28.246] (**) Wolf mouse (abs) virtual device: (accel) selected scheme none/0 [ 28.246] (**) Wolf mouse (abs) virtual device: (accel) acceleration factor: 2.000 [ 28.246] (**) Wolf mouse (abs) virtual device: (accel) acceleration threshold: 4 [ 28.246] (II) config/udev: Adding input device Keyboard passthrough (/dev/input/event256) [ 28.246] (**) Keyboard passthrough: Applying InputClass "libinput keyboard catchall" [ 28.246] (**) Keyboard passthrough: Applying InputClass "system-keyboard" [ 28.246] (II) Using input driver 'libinput' for 'Keyboard passthrough' [ 28.246] (**) Keyboard passthrough: always reports core events [ 28.246] (**) Option "Device" "/dev/input/event256" [ 28.246] (II) event256 - Keyboard passthrough: is tagged by udev as: Keyboard [ 28.246] (II) event256 - Keyboard passthrough: device is a keyboard [ 28.246] (II) event256 - Keyboard passthrough: device removed [ 28.259] (**) Option "config_info" "udev:/sys/devices/virtual/input/input43/event256" [ 28.259] (II) XINPUT: Adding extended input device "Keyboard passthrough" (type: KEYBOARD, id 26) [ 28.259] (**) Option "xkb_model" "pc105+inet" [ 28.259] (**) Option "xkb_layout" "us" [ 28.259] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 28.259] (II) config/udev: Adding input device Sunshine X-Box One (virtual) pad (/dev/input/event258) [ 28.259] (II) No input driver specified, ignoring this device. [ 28.259] (II) This device may have been added with another device file. [ 28.259] (II) config/udev: Adding input device Sunshine Nintendo (virtual) pad (/dev/input/event257) [ 28.259] (II) No input driver specified, ignoring this device. [ 28.259] (II) This device may have been added with another device file. [ 28.259] (II) config/udev: Adding input device Mouse passthrough (/dev/input/event30) [ 28.259] (**) Mouse passthrough: Applying InputClass "libinput pointer catchall" [ 28.259] (II) Using input driver 'libinput' for 'Mouse passthrough' [ 28.259] (**) Mouse passthrough: always reports core events [ 28.259] (**) Option "Device" "/dev/input/event30" [ 28.260] (II) event30 - Mouse passthrough: is tagged by udev as: Mouse [ 28.260] (II) event30 - Mouse passthrough: device is a pointer [ 28.260] (II) event30 - Mouse passthrough: device removed [ 28.271] (II) libinput: Mouse passthrough: Step value 0 was provided, libinput Fallback acceleration function is used. [ 28.271] (II) libinput: Mouse passthrough: Step value 0 was provided, libinput Fallback acceleration function is used. [ 28.271] (II) libinput: Mouse passthrough: Step value 0 was provided, libinput Fallback acceleration function is used. [ 28.271] (**) Option "config_info" "udev:/sys/devices/virtual/input/input41/event30" [ 28.271] (II) XINPUT: Adding extended input device "Mouse passthrough" (type: MOUSE, id 27) [ 28.271] (**) Option "AccelerationScheme" "none" [ 28.271] (**) Mouse passthrough: (accel) selected scheme none/0 [ 28.271] (**) Mouse passthrough: (accel) acceleration factor: 2.000 [ 28.271] (**) Mouse passthrough: (accel) acceleration threshold: 4 [ 173.070] (II) config/udev: Adding input device Drew's S24 Ultra (AVRCP) (/dev/input/event257) [ 173.070] (**) Drew's S24 Ultra (AVRCP): Applying InputClass "libinput keyboard catchall" [ 173.070] (**) Drew's S24 Ultra (AVRCP): Applying InputClass "system-keyboard" [ 173.070] (II) Using input driver 'libinput' for 'Drew's S24 Ultra (AVRCP)' [ 173.070] (**) Drew's S24 Ultra (AVRCP): always reports core events [ 173.070] (**) Option "Device" "/dev/input/event257" [ 173.070] (II) event257 - Drew's S24 Ultra (AVRCP): is tagged by udev as: Keyboard [ 173.070] (II) event257 - Drew's S24 Ultra (AVRCP): device is a keyboard [ 173.070] (II) event257 - Drew's S24 Ultra (AVRCP): device removed [ 173.081] (**) Option "config_info" "udev:/sys/devices/virtual/input/input46/event257" [ 173.081] (II) XINPUT: Adding extended input device "Drew's S24 Ultra (AVRCP)" (type: KEYBOARD, id 28) [ 173.081] (**) Option "xkb_model" "pc105+inet" [ 173.081] (**) Option "xkb_layout" "us" [ 173.081] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 1828.331] (II) config/udev: removing device Logitech MX Ergo [ 1828.331] (II) UnloadModule: "libinput" [ 1828.331] (II) config/udev: removing device Logitech MX Ergo [ 1828.331] (II) UnloadModule: "libinput" [ 1870.967] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/mouse3) [ 1870.967] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 1870.967] (II) No input driver specified, ignoring this device. [ 1870.967] (II) This device may have been added with another device file. [ 1870.999] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/event4) [ 1870.999] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 1870.999] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 1870.999] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 1870.999] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 1870.999] (**) Logitech MX Ergo: always reports core events [ 1870.999] (**) Option "Device" "/dev/input/event4" [ 1871.000] (II) event4 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 1871.000] (II) event4 - Logitech MX Ergo: device set to 380 DPI [ 1871.000] (II) event4 - Logitech MX Ergo: device is a pointer [ 1871.000] (II) event4 - Logitech MX Ergo: device is a keyboard [ 1871.000] (II) event4 - Logitech MX Ergo: device removed [ 1871.008] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1871.008] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1871.008] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1871.008] (II) libinput: Logitech MX Ergo: needs a virtual subdevice [ 1871.008] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0014/0003:046D:406F.0015/input/input47/event4" [ 1871.008] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: MOUSE, id 20) [ 1871.008] (**) Option "AccelerationScheme" "none" [ 1871.008] (**) Logitech MX Ergo: (accel) selected scheme none/0 [ 1871.008] (**) Logitech MX Ergo: (accel) acceleration factor: 2.000 [ 1871.008] (**) Logitech MX Ergo: (accel) acceleration threshold: 4 [ 1871.008] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 1871.008] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 1871.008] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 1871.008] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 1871.008] (**) Logitech MX Ergo: always reports core events [ 1871.008] (**) Option "Device" "/dev/input/event4" [ 1871.008] (II) libinput: Logitech MX Ergo: is a virtual subdevice [ 1871.008] (EE) libinput: Logitech MX Ergo: Parent device not available [ 1871.009] (II) event4 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 1871.009] (II) event4 - Logitech MX Ergo: device set to 380 DPI [ 1871.009] (II) event4 - Logitech MX Ergo: device is a pointer [ 1871.009] (II) event4 - Logitech MX Ergo: device is a keyboard [ 1871.009] (II) event4 - Logitech MX Ergo: device removed [ 1871.024] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1871.024] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1871.024] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 1871.024] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0014/0003:046D:406F.0015/input/input47/event4" [ 1871.024] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: KEYBOARD, id 24) [ 1871.024] (**) Option "xkb_model" "pc105+inet" [ 1871.024] (**) Option "xkb_layout" "us" [ 1871.024] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 2520.714] (II) config/udev: removing device Yubico YubiKey OTP+FIDO+CCID [ 2520.714] (II) UnloadModule: "libinput" [ 2843.257] (II) config/udev: removing device Drew's S24 Ultra (AVRCP) [ 2843.257] (II) UnloadModule: "libinput" [ 5100.496] (II) config/udev: removing device Logitech MX Ergo [ 5100.496] (II) UnloadModule: "libinput" [ 5100.496] (II) config/udev: removing device Logitech MX Ergo [ 5100.496] (II) UnloadModule: "libinput" [ 5135.563] (II) config/udev: removing device Keychron Keychron Q3 Max [ 5135.563] (II) UnloadModule: "libinput" [ 5135.576] (II) config/udev: removing device Keychron Keychron Q3 Max Mouse [ 5135.576] (II) UnloadModule: "libinput" [ 5135.613] (II) config/udev: removing device Keychron Keychron Q3 Max System Control [ 5135.613] (II) UnloadModule: "libinput" [ 5135.636] (II) config/udev: removing device Keychron Keychron Q3 Max Consumer Control [ 5135.636] (II) UnloadModule: "libinput" [ 5135.636] (II) config/udev: removing device Keychron Keychron Q3 Max Consumer Control [ 5135.636] (II) UnloadModule: "libinput" [ 5135.738] (II) config/udev: removing device Keychron Keychron Q3 Max Keyboard [ 5135.738] (II) UnloadModule: "libinput" [ 5332.808] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/mouse0) [ 5332.808] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 5332.808] (II) No input driver specified, ignoring this device. [ 5332.808] (II) This device may have been added with another device file. [ 5332.831] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/event3) [ 5332.831] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 5332.831] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 5332.831] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 5332.831] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 5332.831] (**) Logitech MX Ergo: always reports core events [ 5332.831] (**) Option "Device" "/dev/input/event3" [ 5332.831] (II) event3 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 5332.831] (II) event3 - Logitech MX Ergo: device set to 380 DPI [ 5332.831] (II) event3 - Logitech MX Ergo: device is a pointer [ 5332.831] (II) event3 - Logitech MX Ergo: device is a keyboard [ 5332.832] (II) event3 - Logitech MX Ergo: device removed [ 5332.844] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 5332.844] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 5332.844] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 5332.844] (II) libinput: Logitech MX Ergo: needs a virtual subdevice [ 5332.844] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0018/0003:046D:406F.0019/input/input48/event3" [ 5332.844] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: MOUSE, id 9) [ 5332.844] (**) Option "AccelerationScheme" "none" [ 5332.844] (**) Logitech MX Ergo: (accel) selected scheme none/0 [ 5332.844] (**) Logitech MX Ergo: (accel) acceleration factor: 2.000 [ 5332.844] (**) Logitech MX Ergo: (accel) acceleration threshold: 4 [ 5332.844] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 5332.844] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 5332.844] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 5332.844] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 5332.844] (**) Logitech MX Ergo: always reports core events [ 5332.844] (**) Option "Device" "/dev/input/event3" [ 5332.844] (II) libinput: Logitech MX Ergo: is a virtual subdevice [ 5332.844] (EE) libinput: Logitech MX Ergo: Parent device not available [ 5332.844] (II) event3 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 5332.844] (II) event3 - Logitech MX Ergo: device set to 380 DPI [ 5332.844] (II) event3 - Logitech MX Ergo: device is a pointer [ 5332.844] (II) event3 - Logitech MX Ergo: device is a keyboard [ 5332.845] (II) event3 - Logitech MX Ergo: device removed [ 5332.860] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 5332.860] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 5332.860] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 5332.860] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0018/0003:046D:406F.0019/input/input48/event3" [ 5332.860] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: KEYBOARD, id 10) [ 5332.860] (**) Option "xkb_model" "pc105+inet" [ 5332.860] (**) Option "xkb_layout" "us" [ 5332.860] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 5345.663] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/mouse3) [ 5345.663] (II) No input driver specified, ignoring this device. [ 5345.663] (II) This device may have been added with another device file. [ 5345.688] (II) config/udev: Adding input device Keychron Keychron Q3 Max Consumer Control (/dev/input/event10) [ 5345.688] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 5345.688] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 5345.688] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 5345.688] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 5345.688] (**) Option "Device" "/dev/input/event10" [ 5345.689] (II) event10 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 5345.689] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 5345.689] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device removed [ 5345.696] (II) libinput: Keychron Keychron Q3 Max Consumer Control: needs a virtual subdevice [ 5345.696] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.001C/input/input52/event10" [ 5345.696] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: MOUSE, id 11) [ 5345.696] (**) Option "AccelerationScheme" "none" [ 5345.696] (**) Keychron Keychron Q3 Max Consumer Control: (accel) selected scheme none/0 [ 5345.696] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration factor: 2.000 [ 5345.696] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration threshold: 4 [ 5345.696] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 5345.696] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 5345.696] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 5345.696] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 5345.696] (**) Option "Device" "/dev/input/event10" [ 5345.696] (II) libinput: Keychron Keychron Q3 Max Consumer Control: is a virtual subdevice [ 5345.696] (EE) libinput: Keychron Keychron Q3 Max Consumer Control: Parent device not available [ 5345.696] (II) event10 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 5345.697] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 5345.697] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device removed [ 5345.713] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.001C/input/input52/event10" [ 5345.713] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: KEYBOARD, id 12) [ 5345.713] (**) Option "xkb_model" "pc105+inet" [ 5345.713] (**) Option "xkb_layout" "us" [ 5345.713] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 5345.713] (II) config/udev: Adding input device Keychron Keychron Q3 Max Keyboard (/dev/input/event11) [ 5345.713] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "libinput keyboard catchall" [ 5345.713] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "system-keyboard" [ 5345.713] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Keyboard' [ 5345.713] (**) Keychron Keychron Q3 Max Keyboard: always reports core events [ 5345.713] (**) Option "Device" "/dev/input/event11" [ 5345.714] (II) event11 - Keychron Keychron Q3 Max Keyboard: is tagged by udev as: Keyboard [ 5345.714] (II) event11 - Keychron Keychron Q3 Max Keyboard: device is a keyboard [ 5345.714] (II) event11 - Keychron Keychron Q3 Max Keyboard: device removed [ 5345.730] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.001C/input/input53/event11" [ 5345.730] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Keyboard" (type: KEYBOARD, id 13) [ 5345.730] (**) Option "xkb_model" "pc105+inet" [ 5345.730] (**) Option "xkb_layout" "us" [ 5345.730] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 5345.730] (II) config/udev: Adding input device Keychron Keychron Q3 Max System Control (/dev/input/event9) [ 5345.730] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "libinput keyboard catchall" [ 5345.730] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "system-keyboard" [ 5345.730] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max System Control' [ 5345.730] (**) Keychron Keychron Q3 Max System Control: always reports core events [ 5345.730] (**) Option "Device" "/dev/input/event9" [ 5345.731] (II) event9 - Keychron Keychron Q3 Max System Control: is tagged by udev as: Keyboard Joystick [ 5345.731] (II) event9 - Keychron Keychron Q3 Max System Control: device is a keyboard [ 5345.731] (II) event9 - Keychron Keychron Q3 Max System Control: device removed [ 5345.752] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.001C/input/input51/event9" [ 5345.752] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max System Control" (type: KEYBOARD, id 20) [ 5345.752] (**) Option "xkb_model" "pc105+inet" [ 5345.752] (**) Option "xkb_layout" "us" [ 5345.752] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 5345.752] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/event8) [ 5345.752] (**) Keychron Keychron Q3 Max Mouse: Applying InputClass "libinput pointer catchall" [ 5345.752] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Mouse' [ 5345.752] (**) Keychron Keychron Q3 Max Mouse: always reports core events [ 5345.752] (**) Option "Device" "/dev/input/event8" [ 5345.753] (II) event8 - Keychron Keychron Q3 Max Mouse: is tagged by udev as: Mouse [ 5345.753] (II) event8 - Keychron Keychron Q3 Max Mouse: device is a pointer [ 5345.753] (II) event8 - Keychron Keychron Q3 Max Mouse: device removed [ 5345.778] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 5345.778] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 5345.778] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 5345.778] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.001C/input/input50/event8" [ 5345.778] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Mouse" (type: MOUSE, id 21) [ 5345.778] (**) Option "AccelerationScheme" "none" [ 5345.778] (**) Keychron Keychron Q3 Max Mouse: (accel) selected scheme none/0 [ 5345.778] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration factor: 2.000 [ 5345.778] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration threshold: 4 [ 5345.778] (II) config/udev: Adding input device Keychron Keychron Q3 Max (/dev/input/event4) [ 5345.778] (**) Keychron Keychron Q3 Max: Applying InputClass "libinput keyboard catchall" [ 5345.778] (**) Keychron Keychron Q3 Max: Applying InputClass "system-keyboard" [ 5345.778] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max' [ 5345.778] (**) Keychron Keychron Q3 Max: always reports core events [ 5345.778] (**) Option "Device" "/dev/input/event4" [ 5345.779] (II) event4 - Keychron Keychron Q3 Max: is tagged by udev as: Keyboard [ 5345.779] (II) event4 - Keychron Keychron Q3 Max: device is a keyboard [ 5345.779] (II) event4 - Keychron Keychron Q3 Max: device removed [ 5345.794] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.0/0003:3434:0830.001A/input/input49/event4" [ 5345.794] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max" (type: KEYBOARD, id 22) [ 5345.794] (**) Option "xkb_model" "pc105+inet" [ 5345.794] (**) Option "xkb_layout" "us" [ 5345.794] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 6117.854] (II) config/udev: removing device Keychron Keychron Q3 Max [ 6117.854] (II) UnloadModule: "libinput" [ 6117.865] (II) config/udev: removing device Keychron Keychron Q3 Max Mouse [ 6117.865] (II) UnloadModule: "libinput" [ 6117.903] (II) config/udev: removing device Keychron Keychron Q3 Max System Control [ 6117.903] (II) UnloadModule: "libinput" [ 6117.924] (II) config/udev: removing device Keychron Keychron Q3 Max Consumer Control [ 6117.924] (II) UnloadModule: "libinput" [ 6117.924] (II) config/udev: removing device Keychron Keychron Q3 Max Consumer Control [ 6117.924] (II) UnloadModule: "libinput" [ 6118.015] (II) config/udev: removing device Keychron Keychron Q3 Max Keyboard [ 6118.015] (II) UnloadModule: "libinput" [ 6285.784] (II) config/udev: removing device Logitech MX Ergo [ 6285.784] (II) UnloadModule: "libinput" [ 6285.784] (II) config/udev: removing device Logitech MX Ergo [ 6285.784] (II) UnloadModule: "libinput" [ 6394.175] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/mouse0) [ 6394.175] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 6394.175] (II) No input driver specified, ignoring this device. [ 6394.175] (II) This device may have been added with another device file. [ 6394.209] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/event3) [ 6394.209] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 6394.209] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 6394.209] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 6394.209] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 6394.209] (**) Logitech MX Ergo: always reports core events [ 6394.209] (**) Option "Device" "/dev/input/event3" [ 6394.209] (II) event3 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 6394.209] (II) event3 - Logitech MX Ergo: device set to 380 DPI [ 6394.209] (II) event3 - Logitech MX Ergo: device is a pointer [ 6394.209] (II) event3 - Logitech MX Ergo: device is a keyboard [ 6394.210] (II) event3 - Logitech MX Ergo: device removed [ 6394.226] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6394.226] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6394.226] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6394.226] (II) libinput: Logitech MX Ergo: needs a virtual subdevice [ 6394.226] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.001F/0003:046D:406F.0020/input/input54/event3" [ 6394.226] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: MOUSE, id 9) [ 6394.226] (**) Option "AccelerationScheme" "none" [ 6394.226] (**) Logitech MX Ergo: (accel) selected scheme none/0 [ 6394.226] (**) Logitech MX Ergo: (accel) acceleration factor: 2.000 [ 6394.226] (**) Logitech MX Ergo: (accel) acceleration threshold: 4 [ 6394.226] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 6394.226] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 6394.226] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 6394.226] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 6394.226] (**) Logitech MX Ergo: always reports core events [ 6394.226] (**) Option "Device" "/dev/input/event3" [ 6394.226] (II) libinput: Logitech MX Ergo: is a virtual subdevice [ 6394.226] (EE) libinput: Logitech MX Ergo: Parent device not available [ 6394.226] (II) event3 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 6394.227] (II) event3 - Logitech MX Ergo: device set to 380 DPI [ 6394.227] (II) event3 - Logitech MX Ergo: device is a pointer [ 6394.227] (II) event3 - Logitech MX Ergo: device is a keyboard [ 6394.227] (II) event3 - Logitech MX Ergo: device removed [ 6394.242] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6394.242] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6394.242] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6394.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.001F/0003:046D:406F.0020/input/input54/event3" [ 6394.242] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: KEYBOARD, id 10) [ 6394.242] (**) Option "xkb_model" "pc105+inet" [ 6394.242] (**) Option "xkb_layout" "us" [ 6394.242] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 6435.719] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/mouse3) [ 6435.719] (II) No input driver specified, ignoring this device. [ 6435.719] (II) This device may have been added with another device file. [ 6435.751] (II) config/udev: Adding input device Keychron Keychron Q3 Max (/dev/input/event4) [ 6435.751] (**) Keychron Keychron Q3 Max: Applying InputClass "libinput keyboard catchall" [ 6435.751] (**) Keychron Keychron Q3 Max: Applying InputClass "system-keyboard" [ 6435.751] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max' [ 6435.751] (**) Keychron Keychron Q3 Max: always reports core events [ 6435.751] (**) Option "Device" "/dev/input/event4" [ 6435.752] (II) event4 - Keychron Keychron Q3 Max: is tagged by udev as: Keyboard [ 6435.752] (II) event4 - Keychron Keychron Q3 Max: device is a keyboard [ 6435.752] (II) event4 - Keychron Keychron Q3 Max: device removed [ 6435.766] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.0/0003:3434:0830.0021/input/input55/event4" [ 6435.766] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max" (type: KEYBOARD, id 11) [ 6435.766] (**) Option "xkb_model" "pc105+inet" [ 6435.766] (**) Option "xkb_layout" "us" [ 6435.766] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 6435.766] (II) config/udev: Adding input device Keychron Keychron Q3 Max Keyboard (/dev/input/event11) [ 6435.766] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "libinput keyboard catchall" [ 6435.766] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "system-keyboard" [ 6435.766] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Keyboard' [ 6435.766] (**) Keychron Keychron Q3 Max Keyboard: always reports core events [ 6435.766] (**) Option "Device" "/dev/input/event11" [ 6435.767] (II) event11 - Keychron Keychron Q3 Max Keyboard: is tagged by udev as: Keyboard [ 6435.767] (II) event11 - Keychron Keychron Q3 Max Keyboard: device is a keyboard [ 6435.767] (II) event11 - Keychron Keychron Q3 Max Keyboard: device removed [ 6435.785] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0023/input/input59/event11" [ 6435.785] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Keyboard" (type: KEYBOARD, id 12) [ 6435.785] (**) Option "xkb_model" "pc105+inet" [ 6435.785] (**) Option "xkb_layout" "us" [ 6435.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 6435.785] (II) config/udev: Adding input device Keychron Keychron Q3 Max Consumer Control (/dev/input/event10) [ 6435.785] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 6435.785] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 6435.785] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 6435.785] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 6435.785] (**) Option "Device" "/dev/input/event10" [ 6435.786] (II) event10 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 6435.786] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 6435.786] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device removed [ 6435.810] (II) libinput: Keychron Keychron Q3 Max Consumer Control: needs a virtual subdevice [ 6435.810] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0023/input/input58/event10" [ 6435.810] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: MOUSE, id 13) [ 6435.810] (**) Option "AccelerationScheme" "none" [ 6435.810] (**) Keychron Keychron Q3 Max Consumer Control: (accel) selected scheme none/0 [ 6435.810] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration factor: 2.000 [ 6435.810] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration threshold: 4 [ 6435.810] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 6435.810] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 6435.810] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 6435.810] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 6435.810] (**) Option "Device" "/dev/input/event10" [ 6435.810] (II) libinput: Keychron Keychron Q3 Max Consumer Control: is a virtual subdevice [ 6435.810] (EE) libinput: Keychron Keychron Q3 Max Consumer Control: Parent device not available [ 6435.811] (II) event10 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 6435.811] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 6435.811] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device removed [ 6435.829] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0023/input/input58/event10" [ 6435.829] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: KEYBOARD, id 20) [ 6435.829] (**) Option "xkb_model" "pc105+inet" [ 6435.829] (**) Option "xkb_layout" "us" [ 6435.829] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 6435.829] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/event8) [ 6435.829] (**) Keychron Keychron Q3 Max Mouse: Applying InputClass "libinput pointer catchall" [ 6435.829] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Mouse' [ 6435.829] (**) Keychron Keychron Q3 Max Mouse: always reports core events [ 6435.829] (**) Option "Device" "/dev/input/event8" [ 6435.830] (II) event8 - Keychron Keychron Q3 Max Mouse: is tagged by udev as: Mouse [ 6435.830] (II) event8 - Keychron Keychron Q3 Max Mouse: device is a pointer [ 6435.830] (II) event8 - Keychron Keychron Q3 Max Mouse: device removed [ 6435.842] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6435.842] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6435.842] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 6435.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0023/input/input56/event8" [ 6435.842] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Mouse" (type: MOUSE, id 21) [ 6435.842] (**) Option "AccelerationScheme" "none" [ 6435.842] (**) Keychron Keychron Q3 Max Mouse: (accel) selected scheme none/0 [ 6435.842] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration factor: 2.000 [ 6435.842] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration threshold: 4 [ 6435.842] (II) config/udev: Adding input device Keychron Keychron Q3 Max System Control (/dev/input/event9) [ 6435.842] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "libinput keyboard catchall" [ 6435.842] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "system-keyboard" [ 6435.842] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max System Control' [ 6435.842] (**) Keychron Keychron Q3 Max System Control: always reports core events [ 6435.842] (**) Option "Device" "/dev/input/event9" [ 6435.843] (II) event9 - Keychron Keychron Q3 Max System Control: is tagged by udev as: Keyboard Joystick [ 6435.843] (II) event9 - Keychron Keychron Q3 Max System Control: device is a keyboard [ 6435.843] (II) event9 - Keychron Keychron Q3 Max System Control: device removed [ 6435.867] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0023/input/input57/event9" [ 6435.867] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max System Control" (type: KEYBOARD, id 22) [ 6435.867] (**) Option "xkb_model" "pc105+inet" [ 6435.867] (**) Option "xkb_layout" "us" [ 6435.867] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 6771.393] (II) config/udev: removing device Keychron Keychron Q3 Max [ 6771.393] (II) UnloadModule: "libinput" [ 6771.399] (II) config/udev: removing device Keychron Keychron Q3 Max Mouse [ 6771.399] (II) UnloadModule: "libinput" [ 6771.451] (II) config/udev: removing device Keychron Keychron Q3 Max System Control [ 6771.451] (II) UnloadModule: "libinput" [ 6771.472] (II) config/udev: removing device Keychron Keychron Q3 Max Consumer Control [ 6771.472] (II) UnloadModule: "libinput" [ 6771.472] (II) config/udev: removing device Keychron Keychron Q3 Max Consumer Control [ 6771.472] (II) UnloadModule: "libinput" [ 6771.565] (II) config/udev: removing device Keychron Keychron Q3 Max Keyboard [ 6771.565] (II) UnloadModule: "libinput" [ 7184.560] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 7184.560] (II) No input driver specified, ignoring this device. [ 7184.560] (II) This device may have been added with another device file. [ 7184.586] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 7184.586] (II) No input driver specified, ignoring this device. [ 7184.586] (II) This device may have been added with another device file. [ 7423.804] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 7423.804] (II) No input driver specified, ignoring this device. [ 7423.804] (II) This device may have been added with another device file. [ 7423.826] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 7423.826] (II) No input driver specified, ignoring this device. [ 7423.826] (II) This device may have been added with another device file. [ 7494.477] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/mouse3) [ 7494.477] (II) No input driver specified, ignoring this device. [ 7494.477] (II) This device may have been added with another device file. [ 7494.498] (II) config/udev: Adding input device Keychron Keychron Q3 Max Consumer Control (/dev/input/event11) [ 7494.498] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 7494.498] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 7494.498] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 7494.498] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 7494.498] (**) Option "Device" "/dev/input/event11" [ 7494.499] (II) event11 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 7494.499] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 7494.499] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device removed [ 7494.509] (II) libinput: Keychron Keychron Q3 Max Consumer Control: needs a virtual subdevice [ 7494.509] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0026/input/input65/event11" [ 7494.509] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: MOUSE, id 11) [ 7494.509] (**) Option "AccelerationScheme" "none" [ 7494.509] (**) Keychron Keychron Q3 Max Consumer Control: (accel) selected scheme none/0 [ 7494.509] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration factor: 2.000 [ 7494.509] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration threshold: 4 [ 7494.509] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 7494.509] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 7494.509] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 7494.509] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 7494.509] (**) Option "Device" "/dev/input/event11" [ 7494.509] (II) libinput: Keychron Keychron Q3 Max Consumer Control: is a virtual subdevice [ 7494.509] (EE) libinput: Keychron Keychron Q3 Max Consumer Control: Parent device not available [ 7494.509] (II) event11 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 7494.509] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 7494.510] (II) event11 - Keychron Keychron Q3 Max Consumer Control: device removed [ 7494.527] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0026/input/input65/event11" [ 7494.527] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: KEYBOARD, id 12) [ 7494.527] (**) Option "xkb_model" "pc105+inet" [ 7494.527] (**) Option "xkb_layout" "us" [ 7494.527] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 7494.527] (II) config/udev: Adding input device Keychron Keychron Q3 Max (/dev/input/event8) [ 7494.527] (**) Keychron Keychron Q3 Max: Applying InputClass "libinput keyboard catchall" [ 7494.527] (**) Keychron Keychron Q3 Max: Applying InputClass "system-keyboard" [ 7494.527] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max' [ 7494.527] (**) Keychron Keychron Q3 Max: always reports core events [ 7494.527] (**) Option "Device" "/dev/input/event8" [ 7494.528] (II) event8 - Keychron Keychron Q3 Max: is tagged by udev as: Keyboard [ 7494.528] (II) event8 - Keychron Keychron Q3 Max: device is a keyboard [ 7494.528] (II) event8 - Keychron Keychron Q3 Max: device removed [ 7494.540] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.0/0003:3434:0830.0024/input/input62/event8" [ 7494.540] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max" (type: KEYBOARD, id 13) [ 7494.540] (**) Option "xkb_model" "pc105+inet" [ 7494.540] (**) Option "xkb_layout" "us" [ 7494.540] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 7494.540] (II) config/udev: Adding input device Keychron Keychron Q3 Max Keyboard (/dev/input/event12) [ 7494.540] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "libinput keyboard catchall" [ 7494.540] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "system-keyboard" [ 7494.540] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Keyboard' [ 7494.540] (**) Keychron Keychron Q3 Max Keyboard: always reports core events [ 7494.540] (**) Option "Device" "/dev/input/event12" [ 7494.541] (II) event12 - Keychron Keychron Q3 Max Keyboard: is tagged by udev as: Keyboard [ 7494.541] (II) event12 - Keychron Keychron Q3 Max Keyboard: device is a keyboard [ 7494.541] (II) event12 - Keychron Keychron Q3 Max Keyboard: device removed [ 7494.553] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0026/input/input66/event12" [ 7494.553] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Keyboard" (type: KEYBOARD, id 20) [ 7494.553] (**) Option "xkb_model" "pc105+inet" [ 7494.553] (**) Option "xkb_layout" "us" [ 7494.553] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 7494.553] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/event9) [ 7494.553] (**) Keychron Keychron Q3 Max Mouse: Applying InputClass "libinput pointer catchall" [ 7494.553] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Mouse' [ 7494.553] (**) Keychron Keychron Q3 Max Mouse: always reports core events [ 7494.553] (**) Option "Device" "/dev/input/event9" [ 7494.554] (II) event9 - Keychron Keychron Q3 Max Mouse: is tagged by udev as: Mouse [ 7494.554] (II) event9 - Keychron Keychron Q3 Max Mouse: device is a pointer [ 7494.554] (II) event9 - Keychron Keychron Q3 Max Mouse: device removed [ 7494.565] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7494.565] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7494.565] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7494.565] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0026/input/input63/event9" [ 7494.565] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Mouse" (type: MOUSE, id 21) [ 7494.565] (**) Option "AccelerationScheme" "none" [ 7494.565] (**) Keychron Keychron Q3 Max Mouse: (accel) selected scheme none/0 [ 7494.565] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration factor: 2.000 [ 7494.565] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration threshold: 4 [ 7494.565] (II) config/udev: Adding input device Keychron Keychron Q3 Max System Control (/dev/input/event10) [ 7494.565] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "libinput keyboard catchall" [ 7494.565] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "system-keyboard" [ 7494.565] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max System Control' [ 7494.565] (**) Keychron Keychron Q3 Max System Control: always reports core events [ 7494.565] (**) Option "Device" "/dev/input/event10" [ 7494.566] (II) event10 - Keychron Keychron Q3 Max System Control: is tagged by udev as: Keyboard Joystick [ 7494.566] (II) event10 - Keychron Keychron Q3 Max System Control: device is a keyboard [ 7494.566] (II) event10 - Keychron Keychron Q3 Max System Control: device removed [ 7494.572] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0026/input/input64/event10" [ 7494.572] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max System Control" (type: KEYBOARD, id 22) [ 7494.572] (**) Option "xkb_model" "pc105+inet" [ 7494.572] (**) Option "xkb_layout" "us" [ 7494.572] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 7578.814] (II) config/udev: removing device Logitech MX Ergo [ 7578.814] (II) UnloadModule: "libinput" [ 7578.814] (II) config/udev: removing device Logitech MX Ergo [ 7578.814] (II) UnloadModule: "libinput" [ 7620.030] (II) config/udev: removing device Keychron Keychron Q3 Max [ 7620.030] (II) UnloadModule: "libinput" [ 7620.039] (II) config/udev: removing device Keychron Keychron Q3 Max Mouse [ 7620.039] (II) UnloadModule: "libinput" [ 7620.069] (II) config/udev: removing device Keychron Keychron Q3 Max System Control [ 7620.069] (II) UnloadModule: "libinput" [ 7620.085] (II) config/udev: removing device Keychron Keychron Q3 Max Consumer Control [ 7620.085] (II) UnloadModule: "libinput" [ 7620.085] (II) config/udev: removing device Keychron Keychron Q3 Max Consumer Control [ 7620.085] (II) UnloadModule: "libinput" [ 7620.155] (II) config/udev: removing device Keychron Keychron Q3 Max Keyboard [ 7620.155] (II) UnloadModule: "libinput" [ 7647.568] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/mouse0) [ 7647.568] (II) No input driver specified, ignoring this device. [ 7647.568] (II) This device may have been added with another device file. [ 7647.588] (II) config/udev: Adding input device Keychron Keychron Q3 Max System Control (/dev/input/event9) [ 7647.588] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "libinput keyboard catchall" [ 7647.588] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "system-keyboard" [ 7647.588] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max System Control' [ 7647.588] (**) Keychron Keychron Q3 Max System Control: always reports core events [ 7647.588] (**) Option "Device" "/dev/input/event9" [ 7647.588] (II) event9 - Keychron Keychron Q3 Max System Control: is tagged by udev as: Keyboard Joystick [ 7647.588] (II) event9 - Keychron Keychron Q3 Max System Control: device is a keyboard [ 7647.589] (II) event9 - Keychron Keychron Q3 Max System Control: device removed [ 7647.595] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0029/input/input69/event9" [ 7647.595] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max System Control" (type: KEYBOARD, id 9) [ 7647.595] (**) Option "xkb_model" "pc105+inet" [ 7647.595] (**) Option "xkb_layout" "us" [ 7647.595] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 7647.596] (II) config/udev: Adding input device Keychron Keychron Q3 Max (/dev/input/event3) [ 7647.596] (**) Keychron Keychron Q3 Max: Applying InputClass "libinput keyboard catchall" [ 7647.596] (**) Keychron Keychron Q3 Max: Applying InputClass "system-keyboard" [ 7647.596] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max' [ 7647.596] (**) Keychron Keychron Q3 Max: always reports core events [ 7647.596] (**) Option "Device" "/dev/input/event3" [ 7647.596] (II) event3 - Keychron Keychron Q3 Max: is tagged by udev as: Keyboard [ 7647.596] (II) event3 - Keychron Keychron Q3 Max: device is a keyboard [ 7647.597] (II) event3 - Keychron Keychron Q3 Max: device removed [ 7647.614] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.0/0003:3434:0830.0027/input/input67/event3" [ 7647.614] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max" (type: KEYBOARD, id 10) [ 7647.614] (**) Option "xkb_model" "pc105+inet" [ 7647.614] (**) Option "xkb_layout" "us" [ 7647.614] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 7647.614] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/event8) [ 7647.614] (**) Keychron Keychron Q3 Max Mouse: Applying InputClass "libinput pointer catchall" [ 7647.614] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Mouse' [ 7647.614] (**) Keychron Keychron Q3 Max Mouse: always reports core events [ 7647.614] (**) Option "Device" "/dev/input/event8" [ 7647.615] (II) event8 - Keychron Keychron Q3 Max Mouse: is tagged by udev as: Mouse [ 7647.615] (II) event8 - Keychron Keychron Q3 Max Mouse: device is a pointer [ 7647.615] (II) event8 - Keychron Keychron Q3 Max Mouse: device removed [ 7647.627] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7647.627] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7647.627] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7647.627] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0029/input/input68/event8" [ 7647.627] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Mouse" (type: MOUSE, id 11) [ 7647.627] (**) Option "AccelerationScheme" "none" [ 7647.627] (**) Keychron Keychron Q3 Max Mouse: (accel) selected scheme none/0 [ 7647.627] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration factor: 2.000 [ 7647.627] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration threshold: 4 [ 7647.627] (II) config/udev: Adding input device Keychron Keychron Q3 Max Keyboard (/dev/input/event11) [ 7647.627] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "libinput keyboard catchall" [ 7647.627] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "system-keyboard" [ 7647.627] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Keyboard' [ 7647.627] (**) Keychron Keychron Q3 Max Keyboard: always reports core events [ 7647.627] (**) Option "Device" "/dev/input/event11" [ 7647.628] (II) event11 - Keychron Keychron Q3 Max Keyboard: is tagged by udev as: Keyboard [ 7647.628] (II) event11 - Keychron Keychron Q3 Max Keyboard: device is a keyboard [ 7647.628] (II) event11 - Keychron Keychron Q3 Max Keyboard: device removed [ 7647.641] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0029/input/input71/event11" [ 7647.641] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Keyboard" (type: KEYBOARD, id 12) [ 7647.641] (**) Option "xkb_model" "pc105+inet" [ 7647.641] (**) Option "xkb_layout" "us" [ 7647.641] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 7647.641] (II) config/udev: Adding input device Keychron Keychron Q3 Max Consumer Control (/dev/input/event10) [ 7647.641] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 7647.641] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 7647.641] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 7647.641] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 7647.641] (**) Option "Device" "/dev/input/event10" [ 7647.642] (II) event10 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 7647.643] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 7647.643] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device removed [ 7647.652] (II) libinput: Keychron Keychron Q3 Max Consumer Control: needs a virtual subdevice [ 7647.652] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0029/input/input70/event10" [ 7647.652] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: MOUSE, id 13) [ 7647.652] (**) Option "AccelerationScheme" "none" [ 7647.652] (**) Keychron Keychron Q3 Max Consumer Control: (accel) selected scheme none/0 [ 7647.652] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration factor: 2.000 [ 7647.652] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration threshold: 4 [ 7647.652] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 7647.652] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 7647.652] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 7647.652] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 7647.652] (**) Option "Device" "/dev/input/event10" [ 7647.652] (II) libinput: Keychron Keychron Q3 Max Consumer Control: is a virtual subdevice [ 7647.652] (EE) libinput: Keychron Keychron Q3 Max Consumer Control: Parent device not available [ 7647.653] (II) event10 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 7647.653] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 7647.653] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device removed [ 7647.660] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0029/input/input70/event10" [ 7647.660] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: KEYBOARD, id 20) [ 7647.660] (**) Option "xkb_model" "pc105+inet" [ 7647.660] (**) Option "xkb_layout" "us" [ 7647.660] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 7653.422] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/mouse3) [ 7653.423] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 7653.423] (II) No input driver specified, ignoring this device. [ 7653.423] (II) This device may have been added with another device file. [ 7653.447] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/event12) [ 7653.447] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 7653.447] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 7653.447] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 7653.447] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 7653.447] (**) Logitech MX Ergo: always reports core events [ 7653.447] (**) Option "Device" "/dev/input/event12" [ 7653.448] (II) event12 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 7653.448] (II) event12 - Logitech MX Ergo: device set to 380 DPI [ 7653.448] (II) event12 - Logitech MX Ergo: device is a pointer [ 7653.448] (II) event12 - Logitech MX Ergo: device is a keyboard [ 7653.448] (II) event12 - Logitech MX Ergo: device removed [ 7653.457] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7653.457] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7653.457] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7653.457] (II) libinput: Logitech MX Ergo: needs a virtual subdevice [ 7653.457] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.002C/0003:046D:406F.002D/input/input72/event12" [ 7653.457] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: MOUSE, id 21) [ 7653.457] (**) Option "AccelerationScheme" "none" [ 7653.457] (**) Logitech MX Ergo: (accel) selected scheme none/0 [ 7653.457] (**) Logitech MX Ergo: (accel) acceleration factor: 2.000 [ 7653.457] (**) Logitech MX Ergo: (accel) acceleration threshold: 4 [ 7653.457] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 7653.457] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 7653.457] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 7653.457] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 7653.457] (**) Logitech MX Ergo: always reports core events [ 7653.457] (**) Option "Device" "/dev/input/event12" [ 7653.457] (II) libinput: Logitech MX Ergo: is a virtual subdevice [ 7653.457] (EE) libinput: Logitech MX Ergo: Parent device not available [ 7653.458] (II) event12 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 7653.458] (II) event12 - Logitech MX Ergo: device set to 380 DPI [ 7653.458] (II) event12 - Logitech MX Ergo: device is a pointer [ 7653.458] (II) event12 - Logitech MX Ergo: device is a keyboard [ 7653.459] (II) event12 - Logitech MX Ergo: device removed [ 7653.471] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7653.471] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7653.471] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 7653.471] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.002C/0003:046D:406F.002D/input/input72/event12" [ 7653.471] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: KEYBOARD, id 22) [ 7653.471] (**) Option "xkb_model" "pc105+inet" [ 7653.471] (**) Option "xkb_layout" "us" [ 7653.471] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 7901.373] (II) config/udev: removing device Keychron Keychron Q3 Max [ 7901.373] (II) UnloadModule: "libinput" [ 7901.386] (II) config/udev: removing device Keychron Keychron Q3 Max Mouse [ 7901.386] (II) UnloadModule: "libinput" [ 7901.413] (II) config/udev: removing device Keychron Keychron Q3 Max System Control [ 7901.413] (II) UnloadModule: "libinput" [ 7901.428] (II) config/udev: removing device Keychron Keychron Q3 Max Consumer Control [ 7901.428] (II) UnloadModule: "libinput" [ 7901.428] (II) config/udev: removing device Keychron Keychron Q3 Max Consumer Control [ 7901.428] (II) UnloadModule: "libinput" [ 7901.496] (II) config/udev: removing device Keychron Keychron Q3 Max Keyboard [ 7901.496] (II) UnloadModule: "libinput" [ 8195.913] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/mouse0) [ 8195.913] (II) No input driver specified, ignoring this device. [ 8195.913] (II) This device may have been added with another device file. [ 8195.931] (II) config/udev: Adding input device Keychron Keychron Q3 Max System Control (/dev/input/event9) [ 8195.931] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "libinput keyboard catchall" [ 8195.931] (**) Keychron Keychron Q3 Max System Control: Applying InputClass "system-keyboard" [ 8195.931] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max System Control' [ 8195.931] (**) Keychron Keychron Q3 Max System Control: always reports core events [ 8195.931] (**) Option "Device" "/dev/input/event9" [ 8195.932] (II) event9 - Keychron Keychron Q3 Max System Control: is tagged by udev as: Keyboard Joystick [ 8195.932] (II) event9 - Keychron Keychron Q3 Max System Control: device is a keyboard [ 8195.933] (II) event9 - Keychron Keychron Q3 Max System Control: device removed [ 8195.941] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0030/input/input75/event9" [ 8195.941] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max System Control" (type: KEYBOARD, id 9) [ 8195.941] (**) Option "xkb_model" "pc105+inet" [ 8195.941] (**) Option "xkb_layout" "us" [ 8195.941] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8195.942] (II) config/udev: Adding input device Keychron Keychron Q3 Max Consumer Control (/dev/input/event10) [ 8195.942] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 8195.942] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 8195.942] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 8195.942] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 8195.942] (**) Option "Device" "/dev/input/event10" [ 8195.943] (II) event10 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 8195.943] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 8195.943] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device removed [ 8195.962] (II) libinput: Keychron Keychron Q3 Max Consumer Control: needs a virtual subdevice [ 8195.962] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0030/input/input76/event10" [ 8195.962] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: MOUSE, id 10) [ 8195.962] (**) Option "AccelerationScheme" "none" [ 8195.962] (**) Keychron Keychron Q3 Max Consumer Control: (accel) selected scheme none/0 [ 8195.962] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration factor: 2.000 [ 8195.962] (**) Keychron Keychron Q3 Max Consumer Control: (accel) acceleration threshold: 4 [ 8195.962] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "libinput keyboard catchall" [ 8195.962] (**) Keychron Keychron Q3 Max Consumer Control: Applying InputClass "system-keyboard" [ 8195.962] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Consumer Control' [ 8195.962] (**) Keychron Keychron Q3 Max Consumer Control: always reports core events [ 8195.962] (**) Option "Device" "/dev/input/event10" [ 8195.962] (II) libinput: Keychron Keychron Q3 Max Consumer Control: is a virtual subdevice [ 8195.962] (EE) libinput: Keychron Keychron Q3 Max Consumer Control: Parent device not available [ 8195.963] (II) event10 - Keychron Keychron Q3 Max Consumer Control: is tagged by udev as: Keyboard [ 8195.963] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device is a keyboard [ 8195.963] (II) event10 - Keychron Keychron Q3 Max Consumer Control: device removed [ 8195.975] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0030/input/input76/event10" [ 8195.975] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Consumer Control" (type: KEYBOARD, id 11) [ 8195.975] (**) Option "xkb_model" "pc105+inet" [ 8195.975] (**) Option "xkb_layout" "us" [ 8195.975] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8195.975] (II) config/udev: Adding input device Keychron Keychron Q3 Max Mouse (/dev/input/event8) [ 8195.975] (**) Keychron Keychron Q3 Max Mouse: Applying InputClass "libinput pointer catchall" [ 8195.975] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Mouse' [ 8195.975] (**) Keychron Keychron Q3 Max Mouse: always reports core events [ 8195.975] (**) Option "Device" "/dev/input/event8" [ 8195.976] (II) event8 - Keychron Keychron Q3 Max Mouse: is tagged by udev as: Mouse [ 8195.976] (II) event8 - Keychron Keychron Q3 Max Mouse: device is a pointer [ 8195.976] (II) event8 - Keychron Keychron Q3 Max Mouse: device removed [ 8195.985] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8195.985] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8195.985] (II) libinput: Keychron Keychron Q3 Max Mouse: Step value 0 was provided, libinput Fallback acceleration function is used. [ 8195.985] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0030/input/input74/event8" [ 8195.985] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Mouse" (type: MOUSE, id 12) [ 8195.985] (**) Option "AccelerationScheme" "none" [ 8195.985] (**) Keychron Keychron Q3 Max Mouse: (accel) selected scheme none/0 [ 8195.985] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration factor: 2.000 [ 8195.985] (**) Keychron Keychron Q3 Max Mouse: (accel) acceleration threshold: 4 [ 8195.985] (II) config/udev: Adding input device Keychron Keychron Q3 Max Keyboard (/dev/input/event11) [ 8195.985] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "libinput keyboard catchall" [ 8195.985] (**) Keychron Keychron Q3 Max Keyboard: Applying InputClass "system-keyboard" [ 8195.985] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max Keyboard' [ 8195.985] (**) Keychron Keychron Q3 Max Keyboard: always reports core events [ 8195.985] (**) Option "Device" "/dev/input/event11" [ 8195.986] (II) event11 - Keychron Keychron Q3 Max Keyboard: is tagged by udev as: Keyboard [ 8195.986] (II) event11 - Keychron Keychron Q3 Max Keyboard: device is a keyboard [ 8195.986] (II) event11 - Keychron Keychron Q3 Max Keyboard: device removed [ 8195.998] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.2/0003:3434:0830.0030/input/input77/event11" [ 8195.998] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max Keyboard" (type: KEYBOARD, id 13) [ 8195.998] (**) Option "xkb_model" "pc105+inet" [ 8195.998] (**) Option "xkb_layout" "us" [ 8195.998] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 8195.998] (II) config/udev: Adding input device Keychron Keychron Q3 Max (/dev/input/event3) [ 8195.998] (**) Keychron Keychron Q3 Max: Applying InputClass "libinput keyboard catchall" [ 8195.998] (**) Keychron Keychron Q3 Max: Applying InputClass "system-keyboard" [ 8195.998] (II) Using input driver 'libinput' for 'Keychron Keychron Q3 Max' [ 8195.998] (**) Keychron Keychron Q3 Max: always reports core events [ 8195.998] (**) Option "Device" "/dev/input/event3" [ 8195.999] (II) event3 - Keychron Keychron Q3 Max: is tagged by udev as: Keyboard [ 8195.999] (II) event3 - Keychron Keychron Q3 Max: device is a keyboard [ 8195.999] (II) event3 - Keychron Keychron Q3 Max: device removed [ 8196.010] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1.1/1-5.1.1:1.0/0003:3434:0830.002E/input/input73/event3" [ 8196.010] (II) XINPUT: Adding extended input device "Keychron Keychron Q3 Max" (type: KEYBOARD, id 20) [ 8196.010] (**) Option "xkb_model" "pc105+inet" [ 8196.010] (**) Option "xkb_layout" "us" [ 8196.010] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9452.216] (II) config/udev: removing device Logitech MX Ergo [ 9452.216] (II) UnloadModule: "libinput" [ 9452.216] (II) config/udev: removing device Logitech MX Ergo [ 9452.216] (II) UnloadModule: "libinput" [ 9487.662] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/mouse3) [ 9487.662] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 9487.662] (II) No input driver specified, ignoring this device. [ 9487.662] (II) This device may have been added with another device file. [ 9487.687] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/event12) [ 9487.687] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 9487.687] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 9487.687] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 9487.687] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 9487.687] (**) Logitech MX Ergo: always reports core events [ 9487.687] (**) Option "Device" "/dev/input/event12" [ 9487.689] (II) event12 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 9487.689] (II) event12 - Logitech MX Ergo: device set to 380 DPI [ 9487.689] (II) event12 - Logitech MX Ergo: device is a pointer [ 9487.689] (II) event12 - Logitech MX Ergo: device is a keyboard [ 9487.689] (II) event12 - Logitech MX Ergo: device removed [ 9487.698] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9487.698] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9487.698] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9487.698] (II) libinput: Logitech MX Ergo: needs a virtual subdevice [ 9487.698] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0033/0003:046D:406F.0034/input/input78/event12" [ 9487.698] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: MOUSE, id 21) [ 9487.698] (**) Option "AccelerationScheme" "none" [ 9487.698] (**) Logitech MX Ergo: (accel) selected scheme none/0 [ 9487.698] (**) Logitech MX Ergo: (accel) acceleration factor: 2.000 [ 9487.698] (**) Logitech MX Ergo: (accel) acceleration threshold: 4 [ 9487.698] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 9487.698] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 9487.698] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 9487.698] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 9487.698] (**) Logitech MX Ergo: always reports core events [ 9487.698] (**) Option "Device" "/dev/input/event12" [ 9487.698] (II) libinput: Logitech MX Ergo: is a virtual subdevice [ 9487.698] (EE) libinput: Logitech MX Ergo: Parent device not available [ 9487.699] (II) event12 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 9487.699] (II) event12 - Logitech MX Ergo: device set to 380 DPI [ 9487.699] (II) event12 - Logitech MX Ergo: device is a pointer [ 9487.699] (II) event12 - Logitech MX Ergo: device is a keyboard [ 9487.699] (II) event12 - Logitech MX Ergo: device removed [ 9487.706] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9487.706] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9487.706] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9487.706] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0033/0003:046D:406F.0034/input/input78/event12" [ 9487.706] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: KEYBOARD, id 22) [ 9487.706] (**) Option "xkb_model" "pc105+inet" [ 9487.706] (**) Option "xkb_layout" "us" [ 9487.706] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 9503.931] (II) config/udev: removing device Logitech MX Ergo [ 9503.931] (II) UnloadModule: "libinput" [ 9503.931] (II) config/udev: removing device Logitech MX Ergo [ 9503.931] (II) UnloadModule: "libinput" [ 9885.744] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/mouse3) [ 9885.744] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 9885.744] (II) No input driver specified, ignoring this device. [ 9885.744] (II) This device may have been added with another device file. [ 9885.764] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/event12) [ 9885.764] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 9885.764] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 9885.764] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 9885.764] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 9885.764] (**) Logitech MX Ergo: always reports core events [ 9885.764] (**) Option "Device" "/dev/input/event12" [ 9885.765] (II) event12 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 9885.765] (II) event12 - Logitech MX Ergo: device set to 380 DPI [ 9885.765] (II) event12 - Logitech MX Ergo: device is a pointer [ 9885.765] (II) event12 - Logitech MX Ergo: device is a keyboard [ 9885.766] (II) event12 - Logitech MX Ergo: device removed [ 9885.779] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9885.779] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9885.779] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9885.779] (II) libinput: Logitech MX Ergo: needs a virtual subdevice [ 9885.779] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0037/0003:046D:406F.0038/input/input79/event12" [ 9885.779] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: MOUSE, id 21) [ 9885.779] (**) Option "AccelerationScheme" "none" [ 9885.779] (**) Logitech MX Ergo: (accel) selected scheme none/0 [ 9885.779] (**) Logitech MX Ergo: (accel) acceleration factor: 2.000 [ 9885.779] (**) Logitech MX Ergo: (accel) acceleration threshold: 4 [ 9885.779] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 9885.779] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 9885.779] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 9885.779] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 9885.779] (**) Logitech MX Ergo: always reports core events [ 9885.779] (**) Option "Device" "/dev/input/event12" [ 9885.779] (II) libinput: Logitech MX Ergo: is a virtual subdevice [ 9885.779] (EE) libinput: Logitech MX Ergo: Parent device not available [ 9885.780] (II) event12 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 9885.780] (II) event12 - Logitech MX Ergo: device set to 380 DPI [ 9885.780] (II) event12 - Logitech MX Ergo: device is a pointer [ 9885.780] (II) event12 - Logitech MX Ergo: device is a keyboard [ 9885.780] (II) event12 - Logitech MX Ergo: device removed [ 9885.792] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9885.792] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9885.792] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 9885.792] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.0037/0003:046D:406F.0038/input/input79/event12" [ 9885.792] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: KEYBOARD, id 22) [ 9885.792] (**) Option "xkb_model" "pc105+inet" [ 9885.792] (**) Option "xkb_layout" "us" [ 9885.792] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 11192.249] (II) config/udev: removing device Logitech MX Ergo [ 11192.249] (II) UnloadModule: "libinput" [ 11192.249] (II) config/udev: removing device Logitech MX Ergo [ 11192.249] (II) UnloadModule: "libinput" [ 11526.430] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/mouse3) [ 11526.430] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 11526.430] (II) No input driver specified, ignoring this device. [ 11526.430] (II) This device may have been added with another device file. [ 11526.451] (II) config/udev: Adding input device Logitech MX Ergo (/dev/input/event12) [ 11526.451] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 11526.451] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 11526.451] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 11526.451] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 11526.451] (**) Logitech MX Ergo: always reports core events [ 11526.451] (**) Option "Device" "/dev/input/event12" [ 11526.451] (II) event12 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 11526.452] (II) event12 - Logitech MX Ergo: device set to 380 DPI [ 11526.452] (II) event12 - Logitech MX Ergo: device is a pointer [ 11526.452] (II) event12 - Logitech MX Ergo: device is a keyboard [ 11526.452] (II) event12 - Logitech MX Ergo: device removed [ 11526.463] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11526.463] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11526.463] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11526.463] (II) libinput: Logitech MX Ergo: needs a virtual subdevice [ 11526.463] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.003B/0003:046D:406F.003C/input/input80/event12" [ 11526.463] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: MOUSE, id 21) [ 11526.463] (**) Option "AccelerationScheme" "none" [ 11526.463] (**) Logitech MX Ergo: (accel) selected scheme none/0 [ 11526.463] (**) Logitech MX Ergo: (accel) acceleration factor: 2.000 [ 11526.463] (**) Logitech MX Ergo: (accel) acceleration threshold: 4 [ 11526.463] (**) Logitech MX Ergo: Applying InputClass "libinput pointer catchall" [ 11526.463] (**) Logitech MX Ergo: Applying InputClass "libinput keyboard catchall" [ 11526.463] (**) Logitech MX Ergo: Applying InputClass "system-keyboard" [ 11526.463] (II) Using input driver 'libinput' for 'Logitech MX Ergo' [ 11526.463] (**) Logitech MX Ergo: always reports core events [ 11526.463] (**) Option "Device" "/dev/input/event12" [ 11526.463] (II) libinput: Logitech MX Ergo: is a virtual subdevice [ 11526.463] (EE) libinput: Logitech MX Ergo: Parent device not available [ 11526.464] (II) event12 - Logitech MX Ergo: is tagged by udev as: Keyboard Mouse Trackball [ 11526.464] (II) event12 - Logitech MX Ergo: device set to 380 DPI [ 11526.464] (II) event12 - Logitech MX Ergo: device is a pointer [ 11526.464] (II) event12 - Logitech MX Ergo: device is a keyboard [ 11526.464] (II) event12 - Logitech MX Ergo: device removed [ 11526.473] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11526.473] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11526.473] (II) libinput: Logitech MX Ergo: Step value 0 was provided, libinput Fallback acceleration function is used. [ 11526.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.2/0003:046D:C52B.003B/0003:046D:406F.003C/input/input80/event12" [ 11526.473] (II) XINPUT: Adding extended input device "Logitech MX Ergo" (type: KEYBOARD, id 22) [ 11526.473] (**) Option "xkb_model" "pc105+inet" [ 11526.473] (**) Option "xkb_layout" "us" [ 11526.473] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 11937.025] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 11937.025] (II) No input driver specified, ignoring this device. [ 11937.025] (II) This device may have been added with another device file. [ 11937.048] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 11937.048] (II) No input driver specified, ignoring this device. [ 11937.048] (II) This device may have been added with another device file. [ 15864.484] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 15864.484] (II) No input driver specified, ignoring this device. [ 15864.484] (II) This device may have been added with another device file. [ 15864.503] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 15864.503] (II) No input driver specified, ignoring this device. [ 15864.503] (II) This device may have been added with another device file. [ 17346.724] (II) config/udev: Adding input device Drew's S24 Ultra (AVRCP) (/dev/input/event257) [ 17346.724] (**) Drew's S24 Ultra (AVRCP): Applying InputClass "libinput keyboard catchall" [ 17346.724] (**) Drew's S24 Ultra (AVRCP): Applying InputClass "system-keyboard" [ 17346.724] (II) Using input driver 'libinput' for 'Drew's S24 Ultra (AVRCP)' [ 17346.724] (**) Drew's S24 Ultra (AVRCP): always reports core events [ 17346.724] (**) Option "Device" "/dev/input/event257" [ 17346.724] (II) event257 - Drew's S24 Ultra (AVRCP): is tagged by udev as: Keyboard [ 17346.724] (II) event257 - Drew's S24 Ultra (AVRCP): device is a keyboard [ 17346.724] (II) event257 - Drew's S24 Ultra (AVRCP): device removed [ 17346.739] (**) Option "config_info" "udev:/sys/devices/virtual/input/input83/event257" [ 17346.739] (II) XINPUT: Adding extended input device "Drew's S24 Ultra (AVRCP)" (type: KEYBOARD, id 24) [ 17346.739] (**) Option "xkb_model" "pc105+inet" [ 17346.739] (**) Option "xkb_layout" "us" [ 17346.739] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 17453.520] (II) config/udev: removing device Drew's S24 Ultra (AVRCP) [ 17453.520] (II) UnloadModule: "libinput" [ 17467.140] (II) config/udev: Adding input device Drew's S24 Ultra (AVRCP) (/dev/input/event257) [ 17467.140] (**) Drew's S24 Ultra (AVRCP): Applying InputClass "libinput keyboard catchall" [ 17467.140] (**) Drew's S24 Ultra (AVRCP): Applying InputClass "system-keyboard" [ 17467.140] (II) Using input driver 'libinput' for 'Drew's S24 Ultra (AVRCP)' [ 17467.140] (**) Drew's S24 Ultra (AVRCP): always reports core events [ 17467.140] (**) Option "Device" "/dev/input/event257" [ 17467.140] (II) event257 - Drew's S24 Ultra (AVRCP): is tagged by udev as: Keyboard [ 17467.140] (II) event257 - Drew's S24 Ultra (AVRCP): device is a keyboard [ 17467.140] (II) event257 - Drew's S24 Ultra (AVRCP): device removed [ 17467.147] (**) Option "config_info" "udev:/sys/devices/virtual/input/input84/event257" [ 17467.147] (II) XINPUT: Adding extended input device "Drew's S24 Ultra (AVRCP)" (type: KEYBOARD, id 24) [ 17467.147] (**) Option "xkb_model" "pc105+inet" [ 17467.147] (**) Option "xkb_layout" "us" [ 17467.147] (**) Option "xkb_options" "terminate:ctrl_alt_bksp" [ 19067.453] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 19067.453] (II) No input driver specified, ignoring this device. [ 19067.453] (II) This device may have been added with another device file. [ 19067.478] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 19067.478] (II) No input driver specified, ignoring this device. [ 19067.478] (II) This device may have been added with another device file. [ 29119.287] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 29119.288] (II) No input driver specified, ignoring this device. [ 29119.288] (II) This device may have been added with another device file. [ 29119.306] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 29119.306] (II) No input driver specified, ignoring this device. [ 29119.306] (II) This device may have been added with another device file. [ 31055.843] (II) config/udev: removing device Drew's S24 Ultra (AVRCP) [ 31055.875] (II) UnloadModule: "libinput" [ 31101.288] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 31101.288] (II) No input driver specified, ignoring this device. [ 31101.288] (II) This device may have been added with another device file. [ 31101.304] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 31101.304] (II) No input driver specified, ignoring this device. [ 31101.304] (II) This device may have been added with another device file. [ 31472.433] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 31472.433] (II) No input driver specified, ignoring this device. [ 31472.433] (II) This device may have been added with another device file. [ 31472.451] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 31472.451] (II) No input driver specified, ignoring this device. [ 31472.451] (II) This device may have been added with another device file. [ 31479.232] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 31479.232] (II) No input driver specified, ignoring this device. [ 31479.232] (II) This device may have been added with another device file. [ 31479.251] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 31479.251] (II) No input driver specified, ignoring this device. [ 31479.251] (II) This device may have been added with another device file. [ 31686.985] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 31686.985] (II) No input driver specified, ignoring this device. [ 31686.985] (II) This device may have been added with another device file. [ 31687.005] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 31687.005] (II) No input driver specified, ignoring this device. [ 31687.005] (II) This device may have been added with another device file. [ 31698.696] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 31698.696] (II) No input driver specified, ignoring this device. [ 31698.696] (II) This device may have been added with another device file. [ 31698.706] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 31698.706] (II) No input driver specified, ignoring this device. [ 31698.706] (II) This device may have been added with another device file. [ 31701.082] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 31701.082] (II) No input driver specified, ignoring this device. [ 31701.082] (II) This device may have been added with another device file. [ 31701.098] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 31701.098] (II) No input driver specified, ignoring this device. [ 31701.098] (II) This device may have been added with another device file. [ 31724.885] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 31724.885] (II) No input driver specified, ignoring this device. [ 31724.885] (II) This device may have been added with another device file. [ 31724.901] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 31724.901] (II) No input driver specified, ignoring this device. [ 31724.901] (II) This device may have been added with another device file. [ 31791.886] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 31791.886] (II) No input driver specified, ignoring this device. [ 31791.886] (II) This device may have been added with another device file. [ 31791.903] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 31791.903] (II) No input driver specified, ignoring this device. [ 31791.903] (II) This device may have been added with another device file. [ 31911.687] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 31911.687] (II) No input driver specified, ignoring this device. [ 31911.687] (II) This device may have been added with another device file. [ 31911.704] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 31911.704] (II) No input driver specified, ignoring this device. [ 31911.704] (II) This device may have been added with another device file. [ 31982.989] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 31982.989] (II) No input driver specified, ignoring this device. [ 31982.989] (II) This device may have been added with another device file. [ 31983.005] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 31983.005] (II) No input driver specified, ignoring this device. [ 31983.005] (II) This device may have been added with another device file. [ 31993.786] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 31993.786] (II) No input driver specified, ignoring this device. [ 31993.786] (II) This device may have been added with another device file. [ 31993.804] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 31993.804] (II) No input driver specified, ignoring this device. [ 31993.804] (II) This device may have been added with another device file. [ 32069.692] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 32069.692] (II) No input driver specified, ignoring this device. [ 32069.692] (II) This device may have been added with another device file. [ 32069.723] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 32069.723] (II) No input driver specified, ignoring this device. [ 32069.723] (II) This device may have been added with another device file. [ 32110.289] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 32110.289] (II) No input driver specified, ignoring this device. [ 32110.289] (II) This device may have been added with another device file. [ 32110.311] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 32110.311] (II) No input driver specified, ignoring this device. [ 32110.311] (II) This device may have been added with another device file. [ 32177.390] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 32177.390] (II) No input driver specified, ignoring this device. [ 32177.390] (II) This device may have been added with another device file. [ 32177.411] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 32177.411] (II) No input driver specified, ignoring this device. [ 32177.411] (II) This device may have been added with another device file. [ 32233.889] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 32233.889] (II) No input driver specified, ignoring this device. [ 32233.889] (II) This device may have been added with another device file. [ 32233.912] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 32233.912] (II) No input driver specified, ignoring this device. [ 32233.912] (II) This device may have been added with another device file. [ 32334.191] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 32334.191] (II) No input driver specified, ignoring this device. [ 32334.191] (II) This device may have been added with another device file. [ 32334.206] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 32334.206] (II) No input driver specified, ignoring this device. [ 32334.206] (II) This device may have been added with another device file. [ 32337.240] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 32337.240] (II) No input driver specified, ignoring this device. [ 32337.240] (II) This device may have been added with another device file. [ 32337.258] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 32337.258] (II) No input driver specified, ignoring this device. [ 32337.258] (II) This device may have been added with another device file. [ 32405.043] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 32405.043] (II) No input driver specified, ignoring this device. [ 32405.043] (II) This device may have been added with another device file. [ 32405.059] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 32405.060] (II) No input driver specified, ignoring this device. [ 32405.060] (II) This device may have been added with another device file. [ 32431.446] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 32431.446] (II) No input driver specified, ignoring this device. [ 32431.446] (II) This device may have been added with another device file. [ 32431.462] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 32431.462] (II) No input driver specified, ignoring this device. [ 32431.462] (II) This device may have been added with another device file. [ 32524.744] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 32524.744] (II) No input driver specified, ignoring this device. [ 32524.744] (II) This device may have been added with another device file. [ 32524.760] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 32524.760] (II) No input driver specified, ignoring this device. [ 32524.760] (II) This device may have been added with another device file. [ 32572.543] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 32572.543] (II) No input driver specified, ignoring this device. [ 32572.543] (II) This device may have been added with another device file. [ 32572.566] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 32572.566] (II) No input driver specified, ignoring this device. [ 32572.566] (II) This device may have been added with another device file. [ 33355.453] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 33355.453] (II) No input driver specified, ignoring this device. [ 33355.453] (II) This device may have been added with another device file. [ 33355.471] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 33355.471] (II) No input driver specified, ignoring this device. [ 33355.471] (II) This device may have been added with another device file. [ 33433.753] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 33433.753] (II) No input driver specified, ignoring this device. [ 33433.753] (II) This device may have been added with another device file. [ 33433.767] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 33433.768] (II) No input driver specified, ignoring this device. [ 33433.768] (II) This device may have been added with another device file. [ 33488.504] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 33488.504] (II) No input driver specified, ignoring this device. [ 33488.504] (II) This device may have been added with another device file. [ 33488.524] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 33488.524] (II) No input driver specified, ignoring this device. [ 33488.524] (II) This device may have been added with another device file. [ 33670.957] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 33670.957] (II) No input driver specified, ignoring this device. [ 33670.957] (II) This device may have been added with another device file. [ 33670.975] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 33670.975] (II) No input driver specified, ignoring this device. [ 33670.975] (II) This device may have been added with another device file. [ 33745.354] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 33745.354] (II) No input driver specified, ignoring this device. [ 33745.354] (II) This device may have been added with another device file. [ 33745.373] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 33745.373] (II) No input driver specified, ignoring this device. [ 33745.373] (II) This device may have been added with another device file. [ 34594.814] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 34594.814] (II) No input driver specified, ignoring this device. [ 34594.814] (II) This device may have been added with another device file. [ 34594.832] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 34594.832] (II) No input driver specified, ignoring this device. [ 34594.832] (II) This device may have been added with another device file. [ 34624.012] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 34624.012] (II) No input driver specified, ignoring this device. [ 34624.012] (II) This device may have been added with another device file. [ 34624.030] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 34624.030] (II) No input driver specified, ignoring this device. [ 34624.030] (II) This device may have been added with another device file. [ 34629.613] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 34629.613] (II) No input driver specified, ignoring this device. [ 34629.613] (II) This device may have been added with another device file. [ 34629.633] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 34629.633] (II) No input driver specified, ignoring this device. [ 34629.633] (II) This device may have been added with another device file. [ 34790.966] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 34790.966] (II) No input driver specified, ignoring this device. [ 34790.966] (II) This device may have been added with another device file. [ 34790.984] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 34790.984] (II) No input driver specified, ignoring this device. [ 34790.984] (II) This device may have been added with another device file. [ 34811.515] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 34811.515] (II) No input driver specified, ignoring this device. [ 34811.515] (II) This device may have been added with another device file. [ 34811.532] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 34811.532] (II) No input driver specified, ignoring this device. [ 34811.532] (II) This device may have been added with another device file. [ 34837.068] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 34837.068] (II) No input driver specified, ignoring this device. [ 34837.068] (II) This device may have been added with another device file. [ 34837.087] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 34837.087] (II) No input driver specified, ignoring this device. [ 34837.087] (II) This device may have been added with another device file. [ 35041.069] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 35041.069] (II) No input driver specified, ignoring this device. [ 35041.069] (II) This device may have been added with another device file. [ 35041.093] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 35041.093] (II) No input driver specified, ignoring this device. [ 35041.093] (II) This device may have been added with another device file. [ 35075.674] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 35075.675] (II) No input driver specified, ignoring this device. [ 35075.675] (II) This device may have been added with another device file. [ 35075.686] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 35075.686] (II) No input driver specified, ignoring this device. [ 35075.686] (II) This device may have been added with another device file. [ 35140.570] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 35140.570] (II) No input driver specified, ignoring this device. [ 35140.570] (II) This device may have been added with another device file. [ 35140.594] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 35140.594] (II) No input driver specified, ignoring this device. [ 35140.594] (II) This device may have been added with another device file. [ 35978.026] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 35978.026] (II) No input driver specified, ignoring this device. [ 35978.026] (II) This device may have been added with another device file. [ 35978.046] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 35978.046] (II) No input driver specified, ignoring this device. [ 35978.046] (II) This device may have been added with another device file. [ 35978.097] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 35978.097] (II) No input driver specified, ignoring this device. [ 35978.097] (II) This device may have been added with another device file. [ 35978.119] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 35978.119] (II) No input driver specified, ignoring this device. [ 35978.119] (II) This device may have been added with another device file. [ 35978.272] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/js3) [ 35978.272] (II) No input driver specified, ignoring this device. [ 35978.272] (II) This device may have been added with another device file. [ 35978.291] (II) config/udev: Adding input device Microsoft X-Box 360 pad 0 (/dev/input/event4) [ 35978.291] (II) No input driver specified, ignoring this device. [ 35978.291] (II) This device may have been added with another device file. [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.852] (II) UnloadModule: "libinput" [ 41079.854] (II) UnloadModule: "libinput" [ 41079.898] (II) NVIDIA(GPU-0): Deleting GPU-0 [ 41079.899] (II) Server terminated successfully (0). Closing log file.