Probe #f1de99a0da of MSI MEG X570 UNIFY Desktop Computer (MS-7C35)

Log: smartctl

/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.18.7-200.fc36.x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Force MP510 Serial Number: -- Firmware Version: ECFM22.5 PCI Vendor/Subsystem ID: 0x1987 IEEE OUI Identifier: 0x6479a7 Total NVM Capacity: 240,057,409,536 [240 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 240,057,409,536 [240 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 ... Local Time is: Mon Jul 4 21:17:43 2022 MSK Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x08): Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.77W - - 0 0 0 0 0 0 1 + 5.71W - - 1 1 1 1 0 0 2 + 5.19W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 45 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 1% Data Units Read: 2,441,602 [1.25 TB] Data Units Written: 2,189,611 [1.12 TB] Host Read Commands: 27,865,146 Host Write Commands: 44,123,157 Controller Busy Time: 105 Power Cycles: 542 Power On Hours: 3,619 Unsafe Shutdowns: 37 Media and Data Integrity Errors: 0 Error Information Log Entries: 1,496 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 63 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 1496 0 0x5012 0x4004 0x028 0 0 - /dev/nvme1n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.18.7-200.fc36.x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Force MP510 Serial Number: -- Firmware Version: ECFM22.5 PCI Vendor/Subsystem ID: 0x1987 IEEE OUI Identifier: 0x6479a7 Total NVM Capacity: 960,197,124,096 [960 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 960,197,124,096 [960 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 ... Local Time is: Mon Jul 4 21:17:43 2022 MSK Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x08): Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 11.52W - - 0 0 0 0 0 0 1 + 8.09W - - 1 1 1 1 0 0 2 + 6.37W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 42 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 1% Data Units Read: 6,639,430 [3.39 TB] Data Units Written: 10,051,551 [5.14 TB] Host Read Commands: 61,926,983 Host Write Commands: 64,616,210 Controller Busy Time: 260 Power Cycles: 882 Power On Hours: 4,946 Unsafe Shutdowns: 137 Media and Data Integrity Errors: 0 Error Information Log Entries: 2,241 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 63 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 2241 0 0x0000 0x4004 0x028 0 0 - /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.18.7-200.fc36.x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ASMT106x_ V0Safe Serial Number: -- Firmware Version: 150910 User Capacity: 320,042,172,416 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: Not in smartctl database 7.3/5319 ATA Version is: ATA8-ACS (minor revision not indicated) Local Time is: Mon Jul 4 21:17:43 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Unavailable Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 122) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 184 184 021 - 1758 4 Start_Stop_Count -O--CK 100 100 000 - 836 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 095 095 000 - 4133 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 828 192 Power-Off_Retract_Count -O--CK 200 200 000 - 47 193 Load_Cycle_Count -O--CK 194 194 000 - 19658 194 Temperature_Celsius -O---K 111 091 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x8000 4 33883 Vendor specific /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.18.7-200.fc36.x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD10JFCX-68N6GN0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 82.00A82 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Jul 4 21:17:43 2022 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (19440) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 217) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 180 175 021 - 1991 4 Start_Stop_Count -O--CK 100 100 000 - 692 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 060 060 000 - 29218 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 678 192 Power-Off_Retract_Count -O--CK 200 200 000 - 143 193 Load_Cycle_Count -O--CK 198 198 000 - 6095 194 Temperature_Celsius -O---K 109 093 000 - 38 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 26788 hours (1116 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 08 00 00 0e 8e 14 28 40 00 Error: IDNF 8 sectors at LBA = 0x0e8e1428 = 244192296 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 08 00 00 0e 8e 14 28 40 00 00:03:43.991 WRITE DMA EXT 25 00 00 00 08 00 00 00 d8 46 d0 40 00 00:03:42.740 READ DMA EXT 25 00 00 00 08 00 00 13 eb 1d c0 40 00 00:03:42.730 READ DMA EXT 25 00 00 00 08 00 00 00 d8 47 70 40 00 00:03:42.721 READ DMA EXT 25 00 00 00 08 00 00 0e 96 04 70 40 00 00:03:42.719 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 27/42 Celsius Lifetime Min/Max Temperature: 19/54 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (18) Index Estimated Time Temperature Celsius 19 2022-07-04 13:20 36 ***************** ... ..(210 skipped). .. ***************** 230 2022-07-04 16:51 36 ***************** 231 2022-07-04 16:52 37 ****************** 232 2022-07-04 16:53 37 ****************** 233 2022-07-04 16:54 37 ****************** 234 2022-07-04 16:55 38 ******************* 235 2022-07-04 16:56 39 ******************** 236 2022-07-04 16:57 38 ******************* 237 2022-07-04 16:58 38 ******************* 238 2022-07-04 16:59 38 ******************* 239 2022-07-04 17:00 37 ****************** 240 2022-07-04 17:01 37 ****************** 241 2022-07-04 17:02 37 ****************** 242 2022-07-04 17:03 38 ******************* ... ..( 2 skipped). .. ******************* 245 2022-07-04 17:06 38 ******************* 246 2022-07-04 17:07 39 ******************** ... ..( 5 skipped). .. ******************** 252 2022-07-04 17:13 39 ******************** 253 2022-07-04 17:14 40 ********************* 254 2022-07-04 17:15 39 ******************** 255 2022-07-04 17:16 39 ******************** 256 2022-07-04 17:17 38 ******************* ... ..( 2 skipped). .. ******************* 259 2022-07-04 17:20 38 ******************* 260 2022-07-04 17:21 37 ****************** 261 2022-07-04 17:22 38 ******************* 262 2022-07-04 17:23 38 ******************* 263 2022-07-04 17:24 38 ******************* 264 2022-07-04 17:25 39 ******************** ... ..( 2 skipped). .. ******************** 267 2022-07-04 17:28 39 ******************** 268 2022-07-04 17:29 40 ********************* ... ..( 10 skipped). .. ********************* 279 2022-07-04 17:40 40 ********************* 280 2022-07-04 17:41 41 ********************** ... ..( 6 skipped). .. ********************** 287 2022-07-04 17:48 41 ********************** 288 2022-07-04 17:49 42 *********************** ... ..( 3 skipped). .. *********************** 292 2022-07-04 17:53 42 *********************** 293 2022-07-04 17:54 41 ********************** ... ..( 3 skipped). .. ********************** 297 2022-07-04 17:58 41 ********************** 298 2022-07-04 17:59 42 *********************** ... ..( 3 skipped). .. *********************** 302 2022-07-04 18:03 42 *********************** 303 2022-07-04 18:04 41 ********************** ... ..( 2 skipped). .. ********************** 306 2022-07-04 18:07 41 ********************** 307 2022-07-04 18:08 40 ********************* ... ..( 6 skipped). .. ********************* 314 2022-07-04 18:15 40 ********************* 315 2022-07-04 18:16 39 ******************** ... ..( 2 skipped). .. ******************** 318 2022-07-04 18:19 39 ******************** 319 2022-07-04 18:20 40 ********************* ... ..( 7 skipped). .. ********************* 327 2022-07-04 18:28 40 ********************* 328 2022-07-04 18:29 39 ******************** 329 2022-07-04 18:30 39 ******************** 330 2022-07-04 18:31 38 ******************* ... ..( 2 skipped). .. ******************* 333 2022-07-04 18:34 38 ******************* 334 2022-07-04 18:35 37 ****************** ... ..( 4 skipped). .. ****************** 339 2022-07-04 18:40 37 ****************** 340 2022-07-04 18:41 36 ***************** ... ..( 6 skipped). .. ***************** 347 2022-07-04 18:48 36 ***************** 348 2022-07-04 18:49 37 ****************** 349 2022-07-04 18:50 37 ****************** 350 2022-07-04 18:51 38 ******************* ... ..( 2 skipped). .. ******************* 353 2022-07-04 18:54 38 ******************* 354 2022-07-04 18:55 39 ******************** ... ..( 7 skipped). .. ******************** 362 2022-07-04 19:03 39 ******************** 363 2022-07-04 19:04 40 ********************* ... ..( 42 skipped). .. ********************* 406 2022-07-04 19:47 40 ********************* 407 2022-07-04 19:48 39 ******************** 408 2022-07-04 19:49 39 ******************** 409 2022-07-04 19:50 38 ******************* 410 2022-07-04 19:51 38 ******************* 411 2022-07-04 19:52 38 ******************* 412 2022-07-04 19:53 37 ****************** ... ..( 4 skipped). .. ****************** 417 2022-07-04 19:58 37 ****************** 418 2022-07-04 19:59 36 ***************** ... ..( 8 skipped). .. ***************** 427 2022-07-04 20:08 36 ***************** 428 2022-07-04 20:09 37 ****************** 429 2022-07-04 20:10 37 ****************** 430 2022-07-04 20:11 37 ****************** 431 2022-07-04 20:12 38 ******************* 432 2022-07-04 20:13 38 ******************* 433 2022-07-04 20:14 38 ******************* 434 2022-07-04 20:15 39 ******************** 435 2022-07-04 20:16 38 ******************* 436 2022-07-04 20:17 38 ******************* 437 2022-07-04 20:18 38 ******************* 438 2022-07-04 20:19 37 ****************** ... ..( 4 skipped). .. ****************** 443 2022-07-04 20:24 37 ****************** 444 2022-07-04 20:25 36 ***************** ... ..( 51 skipped). .. ***************** 18 2022-07-04 21:17 36 ***************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 27107 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 33943 Vendor specific


Hardware for Linux and BSD

GitHub