/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.9-gentoo-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: INTEL SSDPEKNW010T8 Serial Number: -- Firmware Version: 02CA PCI Vendor/Subsystem ID: 0x8086 IEEE OUI Identifier: 0x5cd2e4 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] Namespace 1 Formatted LBA Size: 512 Local Time is: Sun Oct 3 03:07:11 2021 UTC Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Maximum Data Transfer Size: 32 Pages Warning Comp. Temp. Threshold: 77 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 5.50W - - 0 0 0 0 0 0 1 + 3.60W - - 1 1 1 1 0 0 2 + 2.60W - - 2 2 2 2 0 0 3 - 0.0300W - - 3 3 3 3 5000 5000 4 - 0.0040W - - 4 4 4 4 5000 9000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 29 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 1% Data Units Read: 35,130,554 [17.9 TB] Data Units Written: 25,448,572 [13.0 TB] Host Read Commands: 384,379,567 Host Write Commands: 335,817,165 Controller Busy Time: 11,911 Power Cycles: 967 Power On Hours: 8,456 Unsafe Shutdowns: 178 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Thermal Temp. 1 Transition Count: 97 Thermal Temp. 1 Total Time: 463 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/nvme1n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.9-gentoo-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: KIOXIA-EXCERIA SSD Serial Number: -- Firmware Version: ECFA15.1 PCI Vendor/Subsystem ID: 0x1e0f IEEE OUI Identifier: 0x8ce38e Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 8ce38e ... Local Time is: Sun Oct 3 03:07:11 2021 UTC Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0a): Cmd_Eff_Lg Telmtry_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 72 Celsius Critical Comp. Temp. Threshold: 90 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.69W - - 0 0 0 0 1 1 1 + 6.18W - - 1 1 1 1 1 1 2 + 5.42W - - 2 2 2 2 1 1 3 - 0.0500W - - 3 3 3 3 7000 5000 4 - 0.0050W - - 4 4 4 4 13000 36000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 45 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 4% Data Units Read: 3,110,785 [1.59 TB] Data Units Written: 4,028,589 [2.06 TB] Host Read Commands: 42,925,471 Host Write Commands: 43,013,152 Controller Busy Time: 131 Power Cycles: 91 Power On Hours: 3,891 Unsafe Shutdowns: 33 Media and Data Integrity Errors: 0 Error Information Log Entries: 264 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Thermal Temp. 1 Transition Count: 15 Thermal Temp. 1 Total Time: 2621 Error Information (NVMe Log 0x01, 16 of 63 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 264 0 0x1006 0x4004 0x028 0 0 - /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.9-gentoo-x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba P300 Device Model: TOSHIBA HDWD130 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX6OACF0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Oct 3 03:07:11 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (21791) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 364) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 140 140 054 - 69 3 Spin_Up_Time POS--- 141 141 024 - 430 (Average 383) 4 Start_Stop_Count -O--C- 100 100 000 - 2993 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 099 099 000 - 7720 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 098 098 000 - 2994 193 Load_Cycle_Count -O--C- 098 098 000 - 2994 194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 16/47) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: 25/47 Celsius Lifetime Min/Max Temperature: 16/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (82) Index Estimated Time Temperature Celsius 83 2021-10-03 01:00 33 ************** ... ..( 46 skipped). .. ************** 2 2021-10-03 01:47 33 ************** 3 2021-10-03 01:48 34 *************** ... ..( 2 skipped). .. *************** 6 2021-10-03 01:51 34 *************** 7 2021-10-03 01:52 35 **************** 8 2021-10-03 01:53 35 **************** 9 2021-10-03 01:54 35 **************** 10 2021-10-03 01:55 36 ***************** 11 2021-10-03 01:56 36 ***************** 12 2021-10-03 01:57 36 ***************** 13 2021-10-03 01:58 37 ****************** ... ..( 2 skipped). .. ****************** 16 2021-10-03 02:01 37 ****************** 17 2021-10-03 02:02 38 ******************* ... ..( 4 skipped). .. ******************* 22 2021-10-03 02:07 38 ******************* 23 2021-10-03 02:08 39 ******************** ... ..( 3 skipped). .. ******************** 27 2021-10-03 02:12 39 ******************** 28 2021-10-03 02:13 40 ********************* ... ..( 4 skipped). .. ********************* 33 2021-10-03 02:18 40 ********************* 34 2021-10-03 02:19 41 ********************** ... ..( 3 skipped). .. ********************** 38 2021-10-03 02:23 41 ********************** 39 2021-10-03 02:24 42 *********************** ... ..( 15 skipped). .. *********************** 55 2021-10-03 02:40 42 *********************** 56 2021-10-03 02:41 43 ************************ 57 2021-10-03 02:42 42 *********************** ... ..( 3 skipped). .. *********************** 61 2021-10-03 02:46 42 *********************** 62 2021-10-03 02:47 43 ************************ ... ..( 16 skipped). .. ************************ 79 2021-10-03 03:04 43 ************************ 80 2021-10-03 03:05 44 ************************* 81 2021-10-03 03:06 43 ************************ 82 2021-10-03 03:07 43 ************************ SMART WRITE LOG does not return COUNT and LBA_LOW register SCT (Get) Error Recovery Control command failed Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 11 --- Lifetime Power-On Resets 0x01 0x010 4 7720 --- Power-on Hours 0x01 0x018 6 6368207168 --- Logical Sectors Written 0x01 0x020 6 21550943 --- Number of Write Commands 0x01 0x028 6 3359159708 --- Logical Sectors Read 0x01 0x030 6 36418115 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 1389 --- Spindle Motor Power-on Hours 0x03 0x010 4 1389 --- Head Flying Hours 0x03 0x018 4 2994 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 6 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 43 --- Current Temperature 0x05 0x010 1 41 N-- Average Short Term Temperature 0x05 0x018 1 35 N-- Average Long Term Temperature 0x05 0x020 1 47 --- Highest Temperature 0x05 0x028 1 16 --- Lowest Temperature 0x05 0x030 1 42 N-- Highest Average Short Term Temperature 0x05 0x038 1 24 N-- Lowest Average Short Term Temperature 0x05 0x040 1 37 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 16744 --- Number of Hardware Resets 0x06 0x010 4 10948 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 10359 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6680 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS