/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.5.0-21-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: CT500BX100SSD1 Serial Number: -- LU WWN Device Id: 5 00a075 ... Firmware Version: MU02 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jan 1 19:45:25 2025 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 7734 12 Power_Cycle_Count ------ 100 100 000 - 3086 160 Uncorrectable_Error_Cnt ------ 100 100 000 - 0 161 Valid_Spare_Block_Cnt ------ 100 100 000 - 66 163 Initial_Bad_Block_Count ------ 100 100 000 - 25 164 Total_Erase_Count ------ 100 100 000 - 233447 165 Max_Erase_Count ------ 100 100 000 - 273 166 Min_Erase_Count ------ 100 100 000 - 177 167 Average_Erase_Count ------ 100 100 000 - 227 168 Max_Erase_Count_of_Spec ------ 100 100 000 - 2000 169 Remaining_Lifetime_Perc ------ 100 100 000 - 92 175 Program_Fail_Count_Chip ------ 100 100 000 - 0 176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 177 Wear_Leveling_Count ------ 100 100 000 - 599 178 Runtime_Invalid_Blk_Cnt ------ 100 100 000 - 0 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 192 Power-Off_Retract_Count ------ 100 100 000 - 52 194 Temperature_Celsius ------ 100 100 000 - 39 195 Hardware_ECC_Recovered ------ 100 100 000 - 203250 196 Reallocated_Event_Count ------ 100 100 000 - 0 197 Current_Pending_Sector ------ 100 100 000 - 0 198 Offline_Uncorrectable ------ 100 100 000 - 0 199 UDMA_CRC_Error_Count ------ 100 100 000 - 3 232 Available_Reservd_Space ------ 100 100 000 - 100 241 Host_Writes_32MiB ------ 100 100 000 - 2264521 242 Host_Reads_32MiB ------ 100 100 000 - 1680167 245 TLC_Writes_32MiB ------ 100 100 000 - 3735152 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 64 Current Device Internal Status Data log 0x25 GPL R/O 64 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: 31/40 Celsius Lifetime Min/Max Temperature: 0/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (104) Index Estimated Time Temperature Celsius 105 2025-01-01 17:38 32 ************* ... ..( 24 skipped). .. ************* 2 2025-01-01 18:03 32 ************* 3 2025-01-01 18:04 34 *************** ... ..( 4 skipped). .. *************** 8 2025-01-01 18:09 34 *************** 9 2025-01-01 18:10 35 **************** ... ..( 11 skipped). .. **************** 21 2025-01-01 18:22 35 **************** 22 2025-01-01 18:23 36 ***************** ... ..( 31 skipped). .. ***************** 54 2025-01-01 18:55 36 ***************** 55 2025-01-01 18:56 37 ****************** ... ..( 4 skipped). .. ****************** 60 2025-01-01 19:01 37 ****************** 61 2025-01-01 19:02 39 ******************** ... ..( 11 skipped). .. ******************** 73 2025-01-01 19:14 39 ******************** 74 2025-01-01 19:15 40 ********************* ... ..( 16 skipped). .. ********************* 91 2025-01-01 19:32 40 ********************* 92 2025-01-01 19:33 39 ******************** ... ..( 10 skipped). .. ******************** 103 2025-01-01 19:44 39 ******************** 104 2025-01-01 19:45 32 ************* SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 3086 --- Lifetime Power-On Resets 0x01 0x010 4 7734 --- Power-on Hours 0x01 0x018 6 2378764595 --- Logical Sectors Written 0x01 0x020 6 2080955642 --- Number of Write Commands 0x01 0x028 6 2737260255 --- Logical Sectors Read 0x01 0x030 6 1197647282 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 55 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 16724 --- Number of Hardware Resets 0x06 0x018 4 3 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 11 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 22 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC