/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Black Device Model: WDC WD5001AALS-00L3B2 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.03B01 User Capacity: 500 107 862 016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Tue Nov 21 12:43:59 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 131) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 161 159 021 - 4908 4 Start_Stop_Count -O--CK 093 093 000 - 7040 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 056 056 000 - 32312 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 093 093 000 - 7008 192 Power-Off_Retract_Count -O--CK 200 200 000 - 546 193 Load_Cycle_Count -O--CK 198 198 000 - 7040 194 Temperature_Celsius -O---K 108 098 000 - 39 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 252 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 26728 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 28/39 Celsius Lifetime Min/Max Temperature: 29/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (123) Index Estimated Time Temperature Celsius 124 2017-11-21 10:36 43 ************************ ... ..( 23 skipped). .. ************************ 20 2017-11-21 11:00 43 ************************ 21 2017-11-21 11:01 42 *********************** ... ..( 22 skipped). .. *********************** 44 2017-11-21 11:24 42 *********************** 45 2017-11-21 11:25 41 ********************** 46 2017-11-21 11:26 42 *********************** 47 2017-11-21 11:27 ? - 48 2017-11-21 11:28 28 ********* 49 2017-11-21 11:29 29 ********** 50 2017-11-21 11:30 29 ********** 51 2017-11-21 11:31 30 *********** 52 2017-11-21 11:32 30 *********** 53 2017-11-21 11:33 31 ************ 54 2017-11-21 11:34 32 ************* 55 2017-11-21 11:35 32 ************* 56 2017-11-21 11:36 33 ************** 57 2017-11-21 11:37 33 ************** 58 2017-11-21 11:38 33 ************** 59 2017-11-21 11:39 34 *************** ... ..( 2 skipped). .. *************** 62 2017-11-21 11:42 34 *************** 63 2017-11-21 11:43 35 **************** 64 2017-11-21 11:44 35 **************** 65 2017-11-21 11:45 35 **************** 66 2017-11-21 11:46 36 ***************** 67 2017-11-21 11:47 36 ***************** 68 2017-11-21 11:48 36 ***************** 69 2017-11-21 11:49 37 ****************** ... ..( 7 skipped). .. ****************** 77 2017-11-21 11:57 37 ****************** 78 2017-11-21 11:58 38 ******************* 79 2017-11-21 11:59 ? - 80 2017-11-21 12:00 28 ********* 81 2017-11-21 12:01 29 ********** 82 2017-11-21 12:02 29 ********** 83 2017-11-21 12:03 30 *********** 84 2017-11-21 12:04 30 *********** 85 2017-11-21 12:05 31 ************ 86 2017-11-21 12:06 32 ************* 87 2017-11-21 12:07 33 ************** ... ..( 2 skipped). .. ************** 90 2017-11-21 12:10 33 ************** 91 2017-11-21 12:11 34 *************** ... ..( 2 skipped). .. *************** 94 2017-11-21 12:14 34 *************** 95 2017-11-21 12:15 35 **************** 96 2017-11-21 12:16 36 ***************** 97 2017-11-21 12:17 36 ***************** 98 2017-11-21 12:18 36 ***************** 99 2017-11-21 12:19 37 ****************** ... ..( 8 skipped). .. ****************** 108 2017-11-21 12:28 37 ****************** 109 2017-11-21 12:29 38 ******************* ... ..( 2 skipped). .. ******************* 112 2017-11-21 12:32 38 ******************* 113 2017-11-21 12:33 39 ******************** 114 2017-11-21 12:34 38 ******************* 115 2017-11-21 12:35 38 ******************* 116 2017-11-21 12:36 39 ******************** ... ..( 6 skipped). .. ******************** 123 2017-11-21 12:43 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x8000 4 2663 Vendor specific