/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-84-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Black (AF) Device Model: WDC WD7500BPKT-60PK4T0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Sep 19 15:42:27 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12060) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 120) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 2 3 Spin_Up_Time POS--K 196 171 021 - 1183 4 Start_Stop_Count -O--CK 087 087 000 - 13603 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-K 200 200 051 - 0 9 Power_On_Hours -O--CK 076 076 000 - 17604 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 6552 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 4295032833 190 Airflow_Temperature_Cel -O---K 058 038 040 Past 42 (Min/Max 33/44 #105) 191 G-Sense_Error_Rate -O--CK 001 001 000 - 14725 192 Power-Off_Retract_Count -O--CK 199 199 000 - 918 193 Load_Cycle_Count -O--CK 183 183 000 - 52607 194 Temperature_Celsius -O---K 105 085 000 - 42 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 15878 hours (661 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 f7 df 38 07 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 40 00 02:21:10.273 FLUSH CACHE EXT 61 00 08 00 08 00 00 00 19 2b 08 40 00 02:21:10.135 WRITE FPDMA QUEUED 61 00 50 00 00 00 00 00 6e 81 a8 40 00 02:21:10.122 WRITE FPDMA QUEUED 61 00 78 00 00 00 00 00 6f 3d 20 40 00 02:21:09.982 WRITE FPDMA QUEUED 61 00 10 00 08 00 00 0f 31 9c 40 40 00 02:21:09.967 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 33/44 Celsius Lifetime Min/Max Temperature: 33/62 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (87) Index Estimated Time Temperature Celsius 88 2023-09-19 13:35 41 ********************** ... ..( 5 skipped). .. ********************** 94 2023-09-19 13:41 41 ********************** 95 2023-09-19 13:42 42 *********************** 96 2023-09-19 13:43 42 *********************** 97 2023-09-19 13:44 41 ********************** 98 2023-09-19 13:45 41 ********************** 99 2023-09-19 13:46 42 *********************** ... ..( 5 skipped). .. *********************** 105 2023-09-19 13:52 42 *********************** 106 2023-09-19 13:53 43 ************************ ... ..( 4 skipped). .. ************************ 111 2023-09-19 13:58 43 ************************ 112 2023-09-19 13:59 44 ************************* ... ..( 12 skipped). .. ************************* 125 2023-09-19 14:12 44 ************************* 126 2023-09-19 14:13 43 ************************ 127 2023-09-19 14:14 44 ************************* 0 2023-09-19 14:15 44 ************************* 1 2023-09-19 14:16 43 ************************ 2 2023-09-19 14:17 44 ************************* ... ..( 3 skipped). .. ************************* 6 2023-09-19 14:21 44 ************************* 7 2023-09-19 14:22 43 ************************ 8 2023-09-19 14:23 44 ************************* ... ..( 10 skipped). .. ************************* 19 2023-09-19 14:34 44 ************************* 20 2023-09-19 14:35 43 ************************ 21 2023-09-19 14:36 44 ************************* 22 2023-09-19 14:37 43 ************************ 23 2023-09-19 14:38 44 ************************* 24 2023-09-19 14:39 44 ************************* 25 2023-09-19 14:40 44 ************************* 26 2023-09-19 14:41 43 ************************ 27 2023-09-19 14:42 43 ************************ 28 2023-09-19 14:43 43 ************************ 29 2023-09-19 14:44 44 ************************* 30 2023-09-19 14:45 43 ************************ ... ..( 5 skipped). .. ************************ 36 2023-09-19 14:51 43 ************************ 37 2023-09-19 14:52 44 ************************* 38 2023-09-19 14:53 43 ************************ 39 2023-09-19 14:54 44 ************************* 40 2023-09-19 14:55 43 ************************ 41 2023-09-19 14:56 44 ************************* ... ..( 10 skipped). .. ************************* 52 2023-09-19 15:07 44 ************************* 53 2023-09-19 15:08 43 ************************ 54 2023-09-19 15:09 43 ************************ 55 2023-09-19 15:10 43 ************************ 56 2023-09-19 15:11 42 *********************** 57 2023-09-19 15:12 42 *********************** 58 2023-09-19 15:13 42 *********************** 59 2023-09-19 15:14 41 ********************** 60 2023-09-19 15:15 41 ********************** 61 2023-09-19 15:16 42 *********************** 62 2023-09-19 15:17 42 *********************** 63 2023-09-19 15:18 41 ********************** 64 2023-09-19 15:19 41 ********************** 65 2023-09-19 15:20 42 *********************** ... ..( 6 skipped). .. *********************** 72 2023-09-19 15:27 42 *********************** 73 2023-09-19 15:28 41 ********************** 74 2023-09-19 15:29 42 *********************** 75 2023-09-19 15:30 41 ********************** ... ..( 11 skipped). .. ********************** 87 2023-09-19 15:42 41 ********************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 12280 Vendor specific