/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.9.10-200.fc33.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: SanDisk SDSSDA480G Serial Number: -- LU WWN Device Id: 5 001b44 ... Firmware Version: Z32080RL User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Nov 28 14:53:16 2020 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Retired_Block_Count -O--CK 100 100 000 - 0 9 Power_On_Hours_and_Msec -O--CK 000 100 000 - 9386h+00m+00.000s 12 Power_Cycle_Count -O--CK 100 100 000 - 982 165 Unknown_Attribute -O--CK 100 100 000 - 8663146760970 166 Unknown_Attribute -O--CK 100 100 000 - 1 167 Unknown_Attribute -O--CK 100 100 000 - 0 168 Unknown_Attribute -O--CK 100 100 000 - 24 169 Unknown_Attribute -O--CK 100 100 000 - 0 170 Reserve_Block_Count -O--CK 100 100 000 - 0 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 Unknown_SandForce_Attr -O--CK 100 100 000 - 11 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 22 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 063 024 000 - 37 (Min/Max 0/76) 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 230 Life_Curve_Status -O--CK 100 100 000 - 4045870007214 232 Available_Reservd_Space PO--CK 100 100 004 - 100 233 SandForce_Internal -O--CK 100 100 000 - 5495 234 SandForce_Internal -O--CK 100 100 000 - 52961 241 Lifetime_Writes_GiB ----CK 253 253 000 - 12720 242 Lifetime_Reads_GiB ----CK 253 253 000 - 21609 244 Unknown_Attribute -O--CK 000 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 9206 - # 2 Short offline Completed without error 00% 6188 - # 3 Short offline Completed without error 00% 6166 - # 4 Short offline Completed without error 00% 6143 - # 5 Short offline Completed without error 00% 6120 - # 6 Short offline Completed without error 00% 6097 - # 7 Short offline Completed without error 00% 6074 - # 8 Short offline Completed without error 00% 6051 - # 9 Short offline Completed without error 00% 6027 - #10 Short offline Completed without error 00% 6009 - #11 Short offline Completed without error 00% 5994 - #12 Short offline Completed without error 00% 5971 - #13 Short offline Completed without error 00% 5949 - #14 Short offline Completed without error 00% 5928 - #15 Short offline Completed without error 00% 5905 - #16 Short offline Completed without error 00% 5882 - #17 Short offline Completed without error 00% 5859 - #18 Short offline Completed without error 00% 5836 - #19 Short offline Completed without error 00% 5815 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 982 --- Lifetime Power-On Resets 0x01 0x010 4 9386 --- Power-on Hours 0x01 0x018 6 907810899 --- Logical Sectors Written 0x01 0x020 6 862585568 --- Number of Write Commands 0x01 0x028 6 2368317968 --- Logical Sectors Read 0x01 0x030 6 629794030 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.9.10-200.fc33.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sat Nov 28 14:53:16 2020 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12960) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 216) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 4 2 Throughput_Performance -OS--K 056 055 000 - 11761 3 Spin_Up_Time PO---K 091 075 025 - 2787 4 Start_Stop_Count -O--CK 091 091 000 - 9694 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 8285 10 Spin_Retry_Count -O--CK 252 252 051 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1077 191 G-Sense_Error_Rate -O---K 100 100 000 - 277 192 Power-Off_Retract_Count -O---K 100 100 000 - 90 194 Temperature_Celsius -O---- 064 055 000 - 36 (Min/Max 16/45) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 100 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 1475 223 Load_Retry_Count -O--CK 100 100 000 - 562 225 Load_Cycle_Count -O--CK 073 073 000 - 281933 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 4597 hours (191 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 68 00 00 00 01 b6 b0 40 00 Error: UNC 104 sectors at LBA = 0x0001b6b0 = 112304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 00 01 b6 98 40 00 00:00:00.042 READ DMA EXT 25 00 00 00 70 00 00 00 01 b6 28 40 00 00:00:00.042 READ DMA EXT 25 00 00 00 70 00 00 00 01 b6 28 40 00 00:00:00.042 READ DMA EXT 25 00 00 00 80 00 00 00 01 b5 a8 40 00 00:00:00.042 READ DMA EXT 25 00 00 00 70 00 00 00 01 b5 38 40 00 00:00:00.042 READ DMA EXT SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5640 - # 2 Short offline Completed without error 00% 5611 - # 3 Short offline Completed without error 00% 5587 - # 4 Short offline Completed without error 00% 5563 - # 5 Short offline Completed without error 00% 5539 - # 6 Short offline Completed without error 00% 5515 - # 7 Short offline Completed without error 00% 5491 - # 8 Short offline Completed without error 00% 5467 - # 9 Short offline Completed without error 00% 5443 - #10 Short offline Completed without error 00% 5419 - #11 Short offline Completed without error 00% 5395 - #12 Short offline Completed without error 00% 5371 - #13 Short offline Completed without error 00% 5347 - #14 Short offline Completed without error 00% 5323 - #15 Short offline Completed without error 00% 5299 - #16 Short offline Completed without error 00% 5275 - #17 Short offline Completed without error 00% 5251 - #18 Short offline Completed without error 00% 5227 - #19 Short offline Completed without error 00% 5203 - #20 Short offline Completed without error 00% 5179 - #21 Short offline Completed without error 00% 5155 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 30/43 Celsius Lifetime Min/Max Temperature: 16/44 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (4) Index Estimated Time Temperature Celsius 5 2020-11-28 04:15 36 ***************** 6 2020-11-28 04:20 35 **************** ... ..( 13 skipped). .. **************** 20 2020-11-28 05:30 35 **************** 21 2020-11-28 05:35 34 *************** ... ..( 25 skipped). .. *************** 47 2020-11-28 07:45 34 *************** 48 2020-11-28 07:50 33 ************** 49 2020-11-28 07:55 33 ************** 50 2020-11-28 08:00 34 *************** 51 2020-11-28 08:05 33 ************** 52 2020-11-28 08:10 34 *************** ... ..( 2 skipped). .. *************** 55 2020-11-28 08:25 34 *************** 56 2020-11-28 08:30 33 ************** ... ..( 39 skipped). .. ************** 96 2020-11-28 11:50 33 ************** 97 2020-11-28 11:55 34 *************** ... ..( 17 skipped). .. *************** 115 2020-11-28 13:25 34 *************** 116 2020-11-28 13:30 35 **************** ... ..( 12 skipped). .. **************** 1 2020-11-28 14:35 35 **************** 2 2020-11-28 14:40 36 ***************** 3 2020-11-28 14:45 36 ***************** 4 2020-11-28 14:50 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific