/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD5000AAKX-001CA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 15.01H15 User Capacity: 500 107 862 016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed May 17 14:05:39 2017 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9180) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 93) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 191 051 - 1174 3 Spin_Up_Time POS--K 140 139 021 - 3983 4 Start_Stop_Count -O--CK 100 100 000 - 330 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 098 098 000 - 1978 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 330 192 Power-Off_Retract_Count -O--CK 200 200 000 - 144 193 Load_Cycle_Count -O--CK 200 200 000 - 185 194 Temperature_Celsius -O---K 110 088 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 12 198 Offline_Uncorrectable ----CK 200 200 000 - 12 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 11 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1229 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1229 [4] occurred at disk power-on lifetime: 1969 hours (82 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 5e ac 38 e0 00 Error: UNC 8 sectors at LBA = 0x005eac38 = 6204472 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 5e ac 37 e0 00 02:02:45.617 READ DMA EXT 25 00 00 00 08 00 00 00 5e ac 2f e0 00 02:02:45.617 READ DMA EXT 25 00 00 00 08 00 00 00 5e ac 27 e0 00 02:02:45.617 READ DMA EXT 25 00 00 00 08 00 00 00 5e ac 1f e0 00 02:02:45.617 READ DMA EXT 25 00 00 00 08 00 00 1f 42 79 0f e0 00 02:02:45.592 READ DMA EXT Error 1228 [3] occurred at disk power-on lifetime: 1969 hours (82 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 00 5e ac 38 e0 00 Error: UNC 32 sectors at LBA = 0x005eac38 = 6204472 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 00 5e ac 1f e0 00 02:02:43.949 READ DMA EXT 25 00 00 00 08 00 00 1f 42 42 1f e0 00 02:02:43.930 READ DMA EXT ea 00 00 00 00 2b 5a b5 00 00 00 e0 00 02:02:43.882 FLUSH CACHE EXT 35 00 00 00 01 00 00 01 2b 5a b5 e0 00 02:02:43.882 WRITE DMA EXT 35 00 00 00 08 00 00 00 5e 00 47 e0 00 02:02:43.882 WRITE DMA EXT Error 1227 [2] occurred at disk power-on lifetime: 1969 hours (82 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 5e ab 3c e0 00 Error: UNC 8 sectors at LBA = 0x005eab3c = 6204220 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 5e ab 37 e0 00 02:02:41.320 READ DMA EXT 25 00 00 00 40 00 00 02 1f e0 5f e0 00 02:02:41.320 READ DMA EXT 25 00 00 00 08 00 00 00 5e ab 2f e0 00 02:02:41.320 READ DMA EXT 25 00 00 00 40 00 00 02 1f e0 1f e0 00 02:02:41.319 READ DMA EXT 25 00 00 00 08 00 00 00 5e ab 27 e0 00 02:02:41.319 READ DMA EXT Error 1226 [1] occurred at disk power-on lifetime: 1969 hours (82 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 00 5e ab 3c e0 00 Error: UNC 32 sectors at LBA = 0x005eab3c = 6204220 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 00 5e ab 1f e0 00 02:02:39.649 READ DMA EXT 35 00 00 00 03 00 00 01 2b 5a 96 e0 00 02:02:39.649 WRITE DMA EXT 35 00 00 00 18 00 00 00 78 af 47 e0 00 02:02:39.649 WRITE DMA EXT 25 00 00 00 08 00 00 00 60 37 87 e0 00 02:02:39.648 READ DMA EXT 35 00 00 00 20 00 00 00 95 54 bf e0 00 02:02:39.648 WRITE DMA EXT Error 1225 [0] occurred at disk power-on lifetime: 1969 hours (82 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 60 9d c4 e0 00 Error: UNC 8 sectors at LBA = 0x00609dc4 = 6331844 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 60 9d bf e0 00 02:01:56.343 READ DMA EXT 25 00 00 00 08 00 00 00 60 29 07 e0 00 02:01:56.335 READ DMA EXT 25 00 00 00 40 00 00 00 13 ca 39 e0 00 02:01:56.327 READ DMA EXT 25 00 00 00 08 00 00 00 07 f2 a7 e0 00 02:01:56.318 READ DMA EXT 25 00 00 00 1b 00 00 00 04 c0 f9 e0 00 02:01:56.307 READ DMA EXT Error 1224 [23] occurred at disk power-on lifetime: 1969 hours (82 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 20 00 00 00 60 9d c4 e0 00 Error: UNC 32 sectors at LBA = 0x00609dc4 = 6331844 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 20 00 00 00 60 9d bf e0 00 02:01:54.587 READ DMA EXT 35 00 00 00 50 00 00 00 5e a1 b7 e0 00 02:01:54.587 WRITE DMA EXT 35 00 00 00 28 00 00 00 5e a1 87 e0 00 02:01:54.587 WRITE DMA EXT 25 00 00 00 40 00 00 00 13 ca 79 e0 00 02:01:54.568 READ DMA EXT 25 00 00 00 08 00 00 1f 42 8c 5f e0 00 02:01:54.568 READ DMA EXT Error 1223 [22] occurred at disk power-on lifetime: 1969 hours (82 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 00 5f 96 c0 e0 00 Error: UNC 8 sectors at LBA = 0x005f96c0 = 6264512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 00 5f 96 bf e0 00 01:58:18.990 READ DMA EXT 25 00 00 00 80 00 00 0e 25 ea 27 e0 00 01:58:18.942 READ DMA EXT 25 00 00 00 40 00 00 0a 92 57 e7 e0 00 01:58:18.929 READ DMA EXT 25 00 00 00 20 00 00 04 55 f3 87 e0 00 01:58:18.925 READ DMA EXT 25 00 00 00 10 00 00 04 54 d3 0f e0 00 01:58:18.909 READ DMA EXT Error 1222 [21] occurred at disk power-on lifetime: 1969 hours (82 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 01 00 00 00 00 5f 96 c0 e0 00 Error: UNC 256 sectors at LBA = 0x005f96c0 = 6264512 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 00 5f 96 bf e0 00 01:58:17.112 READ DMA EXT 35 00 00 00 20 00 00 1d 41 83 9f e0 00 01:58:17.103 WRITE DMA EXT 35 00 00 00 60 00 00 1d 43 48 7f e0 00 01:58:17.103 WRITE DMA EXT 35 00 00 01 00 00 00 1d 43 47 7f e0 00 01:58:17.102 WRITE DMA EXT 35 00 00 01 00 00 00 1d 43 46 7f e0 00 01:58:17.102 WRITE DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 28/32 Celsius Lifetime Min/Max Temperature: 0/55 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (150) Index Estimated Time Temperature Celsius 151 2017-05-17 06:08 41 ********************** ... ..( 14 skipped). .. ********************** 166 2017-05-17 06:23 41 ********************** 167 2017-05-17 06:24 ? - 168 2017-05-17 06:25 41 ********************** 169 2017-05-17 06:26 ? - 170 2017-05-17 06:27 42 *********************** 171 2017-05-17 06:28 41 ********************** 172 2017-05-17 06:29 42 *********************** 173 2017-05-17 06:30 42 *********************** 174 2017-05-17 06:31 43 ************************ ... ..( 8 skipped). .. ************************ 183 2017-05-17 06:40 43 ************************ 184 2017-05-17 06:41 42 *********************** ... ..( 7 skipped). .. *********************** 192 2017-05-17 06:49 42 *********************** 193 2017-05-17 06:50 ? - 194 2017-05-17 06:51 28 ********* 195 2017-05-17 06:52 29 ********** 196 2017-05-17 06:53 29 ********** 197 2017-05-17 06:54 30 *********** 198 2017-05-17 06:55 31 ************ 199 2017-05-17 06:56 32 ************* 200 2017-05-17 06:57 32 ************* 201 2017-05-17 06:58 40 ********************* ... ..( 4 skipped). .. ********************* 206 2017-05-17 07:03 40 ********************* 207 2017-05-17 07:04 41 ********************** ... ..( 19 skipped). .. ********************** 227 2017-05-17 07:24 41 ********************** 228 2017-05-17 07:25 42 *********************** 229 2017-05-17 07:26 42 *********************** 230 2017-05-17 07:27 41 ********************** 231 2017-05-17 07:28 42 *********************** 232 2017-05-17 07:29 41 ********************** ... ..(111 skipped). .. ********************** 344 2017-05-17 09:21 41 ********************** 345 2017-05-17 09:22 42 *********************** 346 2017-05-17 09:23 41 ********************** 347 2017-05-17 09:24 42 *********************** 348 2017-05-17 09:25 41 ********************** ... ..( 2 skipped). .. ********************** 351 2017-05-17 09:28 41 ********************** 352 2017-05-17 09:29 42 *********************** ... ..( 3 skipped). .. *********************** 356 2017-05-17 09:33 42 *********************** 357 2017-05-17 09:34 41 ********************** 358 2017-05-17 09:35 41 ********************** 359 2017-05-17 09:36 42 *********************** 360 2017-05-17 09:37 41 ********************** 361 2017-05-17 09:38 42 *********************** 362 2017-05-17 09:39 41 ********************** 363 2017-05-17 09:40 42 *********************** 364 2017-05-17 09:41 41 ********************** ... ..( 3 skipped). .. ********************** 368 2017-05-17 09:45 41 ********************** 369 2017-05-17 09:46 42 *********************** 370 2017-05-17 09:47 41 ********************** 371 2017-05-17 09:48 41 ********************** 372 2017-05-17 09:49 42 *********************** 373 2017-05-17 09:50 41 ********************** 374 2017-05-17 09:51 42 *********************** 375 2017-05-17 09:52 41 ********************** 376 2017-05-17 09:53 41 ********************** 377 2017-05-17 09:54 42 *********************** 378 2017-05-17 09:55 41 ********************** ... ..(127 skipped). .. ********************** 28 2017-05-17 12:03 41 ********************** 29 2017-05-17 12:04 42 *********************** ... ..( 10 skipped). .. *********************** 40 2017-05-17 12:15 42 *********************** 41 2017-05-17 12:16 43 ************************ ... ..( 3 skipped). .. ************************ 45 2017-05-17 12:20 43 ************************ 46 2017-05-17 12:21 44 ************************* ... ..( 9 skipped). .. ************************* 56 2017-05-17 12:31 44 ************************* 57 2017-05-17 12:32 43 ************************ ... ..( 6 skipped). .. ************************ 64 2017-05-17 12:39 43 ************************ 65 2017-05-17 12:40 42 *********************** ... ..( 6 skipped). .. *********************** 72 2017-05-17 12:47 42 *********************** 73 2017-05-17 12:48 43 ************************ ... ..( 5 skipped). .. ************************ 79 2017-05-17 12:54 43 ************************ 80 2017-05-17 12:55 44 ************************* ... ..( 5 skipped). .. ************************* 86 2017-05-17 13:01 44 ************************* 87 2017-05-17 13:02 45 ************************** 88 2017-05-17 13:03 44 ************************* 89 2017-05-17 13:04 45 ************************** 90 2017-05-17 13:05 44 ************************* ... ..( 3 skipped). .. ************************* 94 2017-05-17 13:09 44 ************************* 95 2017-05-17 13:10 43 ************************ ... ..( 5 skipped). .. ************************ 101 2017-05-17 13:16 43 ************************ 102 2017-05-17 13:17 42 *********************** ... ..( 10 skipped). .. *********************** 113 2017-05-17 13:28 42 *********************** 114 2017-05-17 13:29 41 ********************** 115 2017-05-17 13:30 41 ********************** 116 2017-05-17 13:31 42 *********************** 117 2017-05-17 13:32 41 ********************** ... ..( 32 skipped). .. ********************** 150 2017-05-17 14:05 41 ********************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 463 Vendor specific /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3160815A Serial Number: -- Firmware Version: 3.AAD User Capacity: 160 040 803 840 bytes [160 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Wed May 17 14:05:39 2017 +07 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 116 092 006 - 112873711 3 Spin_Up_Time PO---- 099 097 000 - 0 4 Start_Stop_Count -O--CK 093 093 020 - 7172 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 089 060 030 - 5160414598 9 Power_On_Hours -O--CK 071 071 000 - 25728 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5670 187 Reported_Uncorrect -O--CK 096 096 000 - 4 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 067 044 045 Past 33 (Min/Max 27/33) 194 Temperature_Celsius -O---K 033 056 000 - 33 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 088 063 000 - 198480787 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 52 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23552 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 93 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 93 [12] occurred at disk power-on lifetime: 15993 hours (666 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 f5 00 22 69 f0 00 00:04:07.302 READ DMA EXT 25 00 00 01 00 00 00 f4 00 22 69 f0 00 00:04:06.843 READ DMA EXT 25 00 00 01 00 00 00 f3 00 22 69 f0 00 00:04:06.398 READ DMA EXT 25 00 00 01 00 00 00 f2 00 22 69 f0 00 00:04:14.185 READ DMA EXT 25 00 00 01 00 00 00 f1 00 22 69 f0 00 00:04:13.727 READ DMA EXT Error 92 [11] occurred at disk power-on lifetime: 15993 hours (666 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 f8 00 22 69 f0 00 00:04:15.562 READ DMA EXT 25 00 00 01 00 00 00 f7 00 22 69 f0 00 00:04:15.103 READ DMA EXT 25 00 00 01 00 00 00 f6 00 22 69 f0 00 00:04:14.644 READ DMA EXT 25 00 00 01 00 00 00 f5 00 22 69 f0 00 00:04:14.185 READ DMA EXT 25 00 00 01 00 00 00 f4 00 22 69 f0 00 00:04:13.727 READ DMA EXT Error 91 [10] occurred at disk power-on lifetime: 15993 hours (666 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 f7 00 22 69 f0 00 00:04:07.302 READ DMA EXT 25 00 00 01 00 00 00 f6 00 22 69 f0 00 00:04:15.103 READ DMA EXT 25 00 00 01 00 00 00 f5 00 22 69 f0 00 00:04:14.644 READ DMA EXT 25 00 00 01 00 00 00 f4 00 22 69 f0 00 00:04:14.185 READ DMA EXT 25 00 00 01 00 00 00 f3 00 22 69 f0 00 00:04:13.727 READ DMA EXT Error 90 [9] occurred at disk power-on lifetime: 15993 hours (666 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 f6 00 22 69 f0 00 00:04:07.302 READ DMA EXT 25 00 00 01 00 00 00 f5 00 22 69 f0 00 00:04:06.843 READ DMA EXT 25 00 00 01 00 00 00 f4 00 22 69 f0 00 00:04:14.644 READ DMA EXT 25 00 00 01 00 00 00 f3 00 22 69 f0 00 00:04:14.185 READ DMA EXT 25 00 00 01 00 00 00 f2 00 22 69 f0 00 00:04:13.727 READ DMA EXT Error 89 [8] occurred at disk power-on lifetime: 15993 hours (666 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 f5 00 22 69 f0 00 00:04:07.302 READ DMA EXT 25 00 00 01 00 00 00 f4 00 22 69 f0 00 00:04:06.843 READ DMA EXT 25 00 00 01 00 00 00 f3 00 22 69 f0 00 00:04:06.398 READ DMA EXT 25 00 00 01 00 00 00 f2 00 22 69 f0 00 00:04:14.185 READ DMA EXT 25 00 00 01 00 00 00 f1 00 22 69 f0 00 00:04:13.727 READ DMA EXT Error 88 [7] occurred at disk power-on lifetime: 15993 hours (666 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 f8 00 22 69 f0 00 00:04:15.562 READ DMA EXT 25 00 00 01 00 00 00 f7 00 22 69 f0 00 00:04:15.103 READ DMA EXT 25 00 00 01 00 00 00 f6 00 22 69 f0 00 00:04:14.644 READ DMA EXT 25 00 00 01 00 00 00 f5 00 22 69 f0 00 00:04:14.185 READ DMA EXT 25 00 00 01 00 00 00 f4 00 22 69 f0 00 00:04:13.727 READ DMA EXT Error 87 [6] occurred at disk power-on lifetime: 15993 hours (666 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 f7 00 22 69 f0 00 00:04:07.302 READ DMA EXT 25 00 00 01 00 00 00 f6 00 22 69 f0 00 00:04:15.103 READ DMA EXT 25 00 00 01 00 00 00 f5 00 22 69 f0 00 00:04:14.644 READ DMA EXT 25 00 00 01 00 00 00 f4 00 22 69 f0 00 00:04:14.185 READ DMA EXT 25 00 00 01 00 00 00 f3 00 22 69 f0 00 00:04:13.727 READ DMA EXT Error 86 [5] occurred at disk power-on lifetime: 15993 hours (666 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 00 00 00 00 00 00 00 f0 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 f6 00 22 69 f0 00 00:04:07.302 READ DMA EXT 25 00 00 01 00 00 00 f5 00 22 69 f0 00 00:04:06.843 READ DMA EXT 25 00 00 01 00 00 00 f4 00 22 69 f0 00 00:04:14.644 READ DMA EXT 25 00 00 01 00 00 00 f3 00 22 69 f0 00 00:04:14.185 READ DMA EXT 25 00 00 01 00 00 00 f2 00 22 69 f0 00 00:04:13.727 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1455 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported