Probe #bb33d2d5bb of ASUSTek M2N-MX Desktop Computer

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE Serial ATA Device Model: WDC WD800JD-22MSA1 Serial Number: -- Firmware Version: 10.01E01 User Capacity: 80 026 361 856 bytes [80,0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Fri Feb 24 14:31:29 2017 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Unavailable Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 33) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 3 Spin_Up_Time PO---- 169 166 021 - 2541 4 Start_Stop_Count -O--CK 100 100 000 - 585 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 085 085 000 - 10950 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 576 190 Airflow_Temperature_Cel -O---K 058 041 045 Past 42 194 Temperature_Celsius -O---K 101 084 000 - 42 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 199 000 - 5 200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 42 Celsius Power Cycle Max Temperature: 42 Celsius Lifetime Max Temperature: 60 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/65 Celsius Min/Max Temperature Limit: 1/70 Celsius Temperature History Size (Index): 128 (1) Index Estimated Time Temperature Celsius 2 2017-02-24 12:24 44 ************************* ... ..( 5 skipped). .. ************************* 8 2017-02-24 12:30 44 ************************* 9 2017-02-24 12:31 43 ************************ 10 2017-02-24 12:32 43 ************************ 11 2017-02-24 12:33 42 *********************** 12 2017-02-24 12:34 43 ************************ 13 2017-02-24 12:35 43 ************************ 14 2017-02-24 12:36 44 ************************* 15 2017-02-24 12:37 43 ************************ 16 2017-02-24 12:38 42 *********************** ... ..( 2 skipped). .. *********************** 19 2017-02-24 12:41 42 *********************** 20 2017-02-24 12:42 43 ************************ 21 2017-02-24 12:43 44 ************************* 22 2017-02-24 12:44 44 ************************* 23 2017-02-24 12:45 43 ************************ 24 2017-02-24 12:46 42 *********************** 25 2017-02-24 12:47 42 *********************** 26 2017-02-24 12:48 43 ************************ 27 2017-02-24 12:49 44 ************************* 28 2017-02-24 12:50 43 ************************ 29 2017-02-24 12:51 43 ************************ 30 2017-02-24 12:52 42 *********************** 31 2017-02-24 12:53 42 *********************** 32 2017-02-24 12:54 43 ************************ 33 2017-02-24 12:55 43 ************************ 34 2017-02-24 12:56 44 ************************* 35 2017-02-24 12:57 43 ************************ 36 2017-02-24 12:58 44 ************************* ... ..( 21 skipped). .. ************************* 58 2017-02-24 13:20 44 ************************* 59 2017-02-24 13:21 45 ************************** 60 2017-02-24 13:22 45 ************************** 61 2017-02-24 13:23 45 ************************** 62 2017-02-24 13:24 44 ************************* ... ..( 26 skipped). .. ************************* 89 2017-02-24 13:51 44 ************************* 90 2017-02-24 13:52 ? - 91 2017-02-24 13:53 30 *********** 92 2017-02-24 13:54 32 ************* 93 2017-02-24 13:55 33 ************** 94 2017-02-24 13:56 34 *************** 95 2017-02-24 13:57 34 *************** 96 2017-02-24 13:58 35 **************** 97 2017-02-24 13:59 35 **************** 98 2017-02-24 14:00 36 ***************** 99 2017-02-24 14:01 37 ****************** ... ..( 4 skipped). .. ****************** 104 2017-02-24 14:06 37 ****************** 105 2017-02-24 14:07 38 ******************* 106 2017-02-24 14:08 39 ******************** ... ..( 7 skipped). .. ******************** 114 2017-02-24 14:16 39 ******************** 115 2017-02-24 14:17 40 ********************* 116 2017-02-24 14:18 41 ********************** 117 2017-02-24 14:19 42 *********************** ... ..( 11 skipped). .. *********************** 1 2017-02-24 14:31 42 *********************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x8000 4 2402 Vendor specific


Hardware for Linux and BSD

GitHub