/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.0-76060800daily20240311-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Corsair Force LE SSD Serial Number: -- Firmware Version: SAFC12.2 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5319 ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu May 30 23:31:16 2024 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 30) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 23350 12 Power_Cycle_Count -O--C- 100 100 000 - 3207 162 Unknown_Attribute PO---- 100 100 000 - 66 170 Unknown_Attribute -O---- 100 100 000 - 0 173 Unknown_Attribute -O--C- 100 100 000 - 13238525 174 Unknown_Attribute -O--C- 100 100 000 - 1250 181 Program_Fail_Cnt_Total -O--C- 100 100 000 - 0 187 Reported_Uncorrect -O--C- 100 100 000 - 0 192 Power-Off_Retract_Count -O--C- 100 100 000 - 1250 194 Temperature_Celsius PO---K 070 070 030 - 30 (Min/Max 30/30) 196 Reallocated_Event_Count -O---- 100 100 010 - 0 218 Unknown_Attribute PO-R-- 100 100 050 - 0 231 Unknown_SSD_Attribute PO--C- 100 100 000 - 80 241 Total_LBAs_Written -O--C- 100 100 000 - 33267 242 Total_LBAs_Read -O--C- 100 100 000 - 43525 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 6 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 3207 --- Lifetime Power-On Resets 0x01 0x010 4 23350 --- Power-on Hours 0x01 0x018 6 69767132664 --- Logical Sectors Written 0x01 0x020 6 999381145 --- Number of Write Commands 0x01 0x028 6 91280536026 --- Logical Sectors Read 0x01 0x030 6 1446268765 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 32 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x010 1 32 --- Average Short Term Temperature 0x05 0x018 1 32 --- Average Long Term Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 5 --- Lowest Temperature 0x05 0x030 1 50 --- Highest Average Short Term Temperature 0x05 0x038 1 16 --- Lowest Average Short Term Temperature 0x05 0x040 1 50 --- Highest Average Long Term Temperature 0x05 0x048 1 16 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 50 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 7620 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 25 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 5 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.0-76060800daily20240311-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar E7K1000 Device Model: Hitachi HDE721010SLA330 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: ST6OA3BF User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database 7.3/5319 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Thu May 30 23:31:16 2024 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14090) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 235) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 131 131 054 - 116 3 Spin_Up_Time POS--- 176 176 024 - 355 (Average 295) 4 Start_Stop_Count -O--C- 099 099 000 - 4935 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 123 123 020 - 34 9 Power_On_Hours -O--C- 090 090 000 - 75767 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 3346 192 Power-Off_Retract_Count -O--CK 096 096 000 - 5639 193 Load_Cycle_Count -O--C- 096 096 000 - 5639 194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 18/54) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 2 198 Offline_Uncorrectable ---R-- 100 100 000 - 2 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 60 Current Device Internal Status Data log 0x80 GPL R/W 60 Host vendor specific log 0x81-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 6 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 6 [1] occurred at disk power-on lifetime: 17274 hours (719 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 7c 00 00 70 87 08 b3 e0 00 Error: UNC 124 sectors at LBA = 0x708708b3 = 1887897779 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 c0 00 00 70 87 05 6f e0 00 42d+09:35:51.028 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 0a 42d+09:35:51.028 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 46 00 00 00 00 00 00 00 a0 0a 42d+09:35:51.028 IDENTIFY DEVICE ef 00 03 00 46 70 6d af 00 00 00 a0 0a 42d+09:35:51.028 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 0a 42d+09:35:51.028 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 5 [0] occurred at disk power-on lifetime: 17274 hours (719 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 7c 00 00 70 87 08 b3 e0 00 Error: UNC 124 sectors at LBA = 0x708708b3 = 1887897779 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 c0 00 00 70 87 05 6f e0 00 42d+09:35:45.628 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 0a 42d+09:35:45.628 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 46 00 00 00 00 00 00 00 a0 0a 42d+09:35:45.628 IDENTIFY DEVICE ef 00 03 00 46 70 6d af 00 00 00 a0 0a 42d+09:35:45.628 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 0a 42d+09:35:45.628 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 4 [3] occurred at disk power-on lifetime: 17274 hours (719 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 7c 00 00 70 87 08 b3 e0 00 Error: UNC 124 sectors at LBA = 0x708708b3 = 1887897779 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 c0 00 00 70 87 05 6f e0 00 42d+09:35:40.328 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 0a 42d+09:35:40.328 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 46 00 00 00 00 00 00 00 a0 0a 42d+09:35:40.328 IDENTIFY DEVICE ef 00 03 00 46 70 6d af 00 00 00 a0 0a 42d+09:35:40.328 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 0a 42d+09:35:40.328 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 3 [2] occurred at disk power-on lifetime: 17274 hours (719 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 7c 00 00 70 87 08 b3 e0 00 Error: UNC 124 sectors at LBA = 0x708708b3 = 1887897779 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 03 c0 00 00 70 87 05 6f e0 00 42d+09:35:34.928 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 0a 42d+09:35:34.928 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 46 00 00 00 00 00 00 00 a0 0a 42d+09:35:34.928 IDENTIFY DEVICE ef 00 03 00 46 70 6d af 00 00 00 a0 0a 42d+09:35:34.928 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 0a 42d+09:35:34.928 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short captive Completed without error 00% 21895 - # 2 Short captive Completed without error 00% 21892 - # 3 Short offline Completed without error 00% 5458 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 34/36 Celsius Lifetime Min/Max Temperature: 18/54 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (121) Index Estimated Time Temperature Celsius 122 2024-05-30 21:24 37 ****************** 123 2024-05-30 21:25 37 ****************** 124 2024-05-30 21:26 37 ****************** 125 2024-05-30 21:27 36 ***************** ... ..( 8 skipped). .. ***************** 6 2024-05-30 21:36 36 ***************** 7 2024-05-30 21:37 35 **************** 8 2024-05-30 21:38 36 ***************** 9 2024-05-30 21:39 35 **************** 10 2024-05-30 21:40 36 ***************** 11 2024-05-30 21:41 36 ***************** 12 2024-05-30 21:42 36 ***************** 13 2024-05-30 21:43 35 **************** 14 2024-05-30 21:44 36 ***************** 15 2024-05-30 21:45 35 **************** ... ..( 28 skipped). .. **************** 44 2024-05-30 22:14 35 **************** 45 2024-05-30 22:15 34 *************** 46 2024-05-30 22:16 35 **************** 47 2024-05-30 22:17 35 **************** 48 2024-05-30 22:18 34 *************** 49 2024-05-30 22:19 35 **************** ... ..( 18 skipped). .. **************** 68 2024-05-30 22:38 35 **************** 69 2024-05-30 22:39 ? - 70 2024-05-30 22:40 32 ************* 71 2024-05-30 22:41 33 ************** 72 2024-05-30 22:42 ? - 73 2024-05-30 22:43 32 ************* 74 2024-05-30 22:44 ? - 75 2024-05-30 22:45 32 ************* 76 2024-05-30 22:46 33 ************** ... ..( 4 skipped). .. ************** 81 2024-05-30 22:51 33 ************** 82 2024-05-30 22:52 34 *************** 83 2024-05-30 22:53 34 *************** 84 2024-05-30 22:54 ? - 85 2024-05-30 22:55 ? - 86 2024-05-30 22:56 34 *************** ... ..( 6 skipped). .. *************** 93 2024-05-30 23:03 34 *************** 94 2024-05-30 23:04 35 **************** 95 2024-05-30 23:05 34 *************** 96 2024-05-30 23:06 34 *************** 97 2024-05-30 23:07 35 **************** ... ..( 21 skipped). .. **************** 119 2024-05-30 23:29 35 **************** 120 2024-05-30 23:30 36 ***************** 121 2024-05-30 23:31 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0009 2 78 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS