/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD2500AAKX-07U6AA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 17.01H17 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Apr 19 12:04:28 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4200) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 45) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 145 144 021 - 3708 4 Start_Stop_Count -O--CK 098 098 000 - 2377 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 089 089 000 - 8649 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1932 192 Power-Off_Retract_Count -O--CK 200 200 000 - 132 193 Load_Cycle_Count -O--CK 200 200 000 - 2244 194 Temperature_Celsius -O---K 113 099 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 21/30 Celsius Lifetime Min/Max Temperature: 0/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (218) Index Estimated Time Temperature Celsius 219 2020-04-19 04:07 30 *********** ... ..( 23 skipped). .. *********** 243 2020-04-19 04:31 30 *********** 244 2020-04-19 04:32 29 ********** ... ..( 59 skipped). .. ********** 304 2020-04-19 05:32 29 ********** 305 2020-04-19 05:33 ? - 306 2020-04-19 05:34 21 ** 307 2020-04-19 05:35 22 *** 308 2020-04-19 05:36 22 *** 309 2020-04-19 05:37 23 **** 310 2020-04-19 05:38 24 ***** 311 2020-04-19 05:39 24 ***** 312 2020-04-19 05:40 25 ****** 313 2020-04-19 05:41 25 ****** 314 2020-04-19 05:42 25 ****** 315 2020-04-19 05:43 26 ******* ... ..( 4 skipped). .. ******* 320 2020-04-19 05:48 26 ******* 321 2020-04-19 05:49 27 ******** ... ..( 6 skipped). .. ******** 328 2020-04-19 05:56 27 ******** 329 2020-04-19 05:57 28 ********* ... ..( 6 skipped). .. ********* 336 2020-04-19 06:04 28 ********* 337 2020-04-19 06:05 29 ********** 338 2020-04-19 06:06 28 ********* 339 2020-04-19 06:07 29 ********** ... ..(190 skipped). .. ********** 52 2020-04-19 09:18 29 ********** 53 2020-04-19 09:19 30 *********** ... ..( 45 skipped). .. *********** 99 2020-04-19 10:05 30 *********** 100 2020-04-19 10:06 31 ************ 101 2020-04-19 10:07 30 *********** 102 2020-04-19 10:08 30 *********** 103 2020-04-19 10:09 31 ************ 104 2020-04-19 10:10 30 *********** ... ..( 8 skipped). .. *********** 113 2020-04-19 10:19 30 *********** 114 2020-04-19 10:20 31 ************ ... ..( 2 skipped). .. ************ 117 2020-04-19 10:23 31 ************ 118 2020-04-19 10:24 32 ************* 119 2020-04-19 10:25 31 ************ 120 2020-04-19 10:26 32 ************* ... ..( 14 skipped). .. ************* 135 2020-04-19 10:41 32 ************* 136 2020-04-19 10:42 31 ************ ... ..( 2 skipped). .. ************ 139 2020-04-19 10:45 31 ************ 140 2020-04-19 10:46 30 *********** ... ..( 13 skipped). .. *********** 154 2020-04-19 11:00 30 *********** 155 2020-04-19 11:01 29 ********** ... ..( 14 skipped). .. ********** 170 2020-04-19 11:16 29 ********** 171 2020-04-19 11:17 30 *********** ... ..( 46 skipped). .. *********** 218 2020-04-19 12:04 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 15891 Vendor specific /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD10EZRX-00A8LB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Apr 19 12:04:28 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 156) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 3 3 Spin_Up_Time POS--K 137 127 021 - 4133 4 Start_Stop_Count -O--CK 083 083 000 - 17675 5 Reallocated_Sector_Ct PO--CK 185 185 140 - 640 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 030 030 000 - 51486 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 083 083 000 - 17477 192 Power-Off_Retract_Count -O--CK 176 176 000 - 18021 193 Load_Cycle_Count -O--CK 126 126 000 - 224001 194 Temperature_Celsius -O---K 113 101 000 - 30 196 Reallocated_Event_Count -O--CK 001 001 000 - 640 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 941 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 941 [4] occurred at disk power-on lifetime: 48820 hours (2034 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 08 9c 67 50 40 00 Error: UNC at LBA = 0x089c6750 = 144467792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 68 00 00 08 9c 67 50 40 08 06:13:11.581 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 06:13:11.580 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 06:13:11.580 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 06:13:11.579 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 06:13:11.579 SET FEATURES [Set transfer mode] Error 940 [3] occurred at disk power-on lifetime: 48820 hours (2034 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 08 9c 67 50 40 00 Error: WP at LBA = 0x089c6750 = 144467792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 02 b8 00 c0 00 00 0b 87 53 48 40 08 06:13:08.605 WRITE FPDMA QUEUED 61 05 48 00 b8 00 00 0b 87 4e 00 40 08 06:13:08.601 WRITE FPDMA QUEUED 61 06 00 00 b0 00 00 0b 87 48 00 40 08 06:13:08.595 WRITE FPDMA QUEUED 61 0a 00 00 a8 00 00 0b 87 3e 00 40 08 06:13:08.586 WRITE FPDMA QUEUED 61 06 00 00 a0 00 00 0b 87 38 00 40 08 06:13:08.581 WRITE FPDMA QUEUED Error 939 [2] occurred at disk power-on lifetime: 48820 hours (2034 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 08 9c 67 50 40 00 Error: WP at LBA = 0x089c6750 = 144467792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 0a 00 00 28 00 00 0b 7f de 00 40 08 06:13:03.925 WRITE FPDMA QUEUED 61 06 00 00 20 00 00 0b 7f d8 00 40 08 06:13:03.925 WRITE FPDMA QUEUED 60 04 00 00 b0 00 00 08 9c 66 80 40 08 06:13:03.925 READ FPDMA QUEUED 60 01 a8 00 a8 00 00 08 9c 64 d8 40 08 06:13:03.892 READ FPDMA QUEUED 60 06 58 00 a0 00 00 08 9c 5e 80 40 08 06:13:03.891 READ FPDMA QUEUED Error 938 [1] occurred at disk power-on lifetime: 17426 hours (726 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 40 00 00 03 e8 ba c8 e0 00 Device Fault; Error: ABRT 64 sectors at LBA = 0x03e8bac8 = 65583816 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 40 00 00 03 e8 ba c8 e0 00 00:01:16.353 READ DMA EXT 35 00 00 01 00 00 00 04 6a 46 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 45 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 44 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 43 28 e0 00 00:01:16.292 WRITE DMA EXT Error 937 [0] occurred at disk power-on lifetime: 17426 hours (726 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 01 00 00 00 04 6a 46 28 e0 00 Device Fault; Error: ABRT 256 sectors at LBA = 0x046a4628 = 74073640 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 04 6a 46 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 45 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 44 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 43 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 42 28 e0 00 00:01:16.292 WRITE DMA EXT Error 936 [23] occurred at disk power-on lifetime: 17426 hours (726 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 01 00 00 00 04 6a 45 28 e0 00 Device Fault; Error: ABRT 256 sectors at LBA = 0x046a4528 = 74073384 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 04 6a 45 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 44 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 43 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 42 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 41 28 e0 00 00:01:16.292 WRITE DMA EXT Error 935 [22] occurred at disk power-on lifetime: 17426 hours (726 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 01 00 00 00 04 6a 44 28 e0 00 Device Fault; Error: ABRT 256 sectors at LBA = 0x046a4428 = 74073128 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 04 6a 44 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 43 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 42 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 41 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 40 28 e0 00 00:01:16.291 WRITE DMA EXT Error 934 [21] occurred at disk power-on lifetime: 17426 hours (726 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 01 00 00 00 04 6a 43 28 e0 00 Device Fault; Error: ABRT 256 sectors at LBA = 0x046a4328 = 74072872 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 04 6a 43 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 42 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 41 28 e0 00 00:01:16.292 WRITE DMA EXT 35 00 00 01 00 00 00 04 6a 40 28 e0 00 00:01:16.291 WRITE DMA EXT 25 00 00 00 40 00 00 04 30 ac 7a e0 00 00:01:16.291 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 48747 144467792 # 2 Conveyance offline Completed without error 00% 48742 - # 3 Short offline Completed: read failure 10% 48742 144467792 # 4 Short offline Completed: read failure 10% 48731 144467792 # 5 Short offline Completed: read failure 10% 48707 144467792 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 18/31 Celsius Lifetime Min/Max Temperature: 5/42 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (98) Index Estimated Time Temperature Celsius 99 2020-04-19 04:07 31 ************ ... ..( 2 skipped). .. ************ 102 2020-04-19 04:10 31 ************ 103 2020-04-19 04:11 30 *********** 104 2020-04-19 04:12 30 *********** 105 2020-04-19 04:13 31 ************ ... ..( 2 skipped). .. ************ 108 2020-04-19 04:16 31 ************ 109 2020-04-19 04:17 30 *********** ... ..(123 skipped). .. *********** 233 2020-04-19 06:21 30 *********** 234 2020-04-19 06:22 29 ********** 235 2020-04-19 06:23 30 *********** ... ..( 5 skipped). .. *********** 241 2020-04-19 06:29 30 *********** 242 2020-04-19 06:30 29 ********** 243 2020-04-19 06:31 29 ********** 244 2020-04-19 06:32 29 ********** 245 2020-04-19 06:33 30 *********** 246 2020-04-19 06:34 29 ********** ... ..( 7 skipped). .. ********** 254 2020-04-19 06:42 29 ********** 255 2020-04-19 06:43 30 *********** 256 2020-04-19 06:44 29 ********** ... ..( 7 skipped). .. ********** 264 2020-04-19 06:52 29 ********** 265 2020-04-19 06:53 30 *********** 266 2020-04-19 06:54 29 ********** ... ..( 5 skipped). .. ********** 272 2020-04-19 07:00 29 ********** 273 2020-04-19 07:01 ? - 274 2020-04-19 07:02 18 - 275 2020-04-19 07:03 18 - 276 2020-04-19 07:04 19 - 277 2020-04-19 07:05 19 - 278 2020-04-19 07:06 20 * 279 2020-04-19 07:07 20 * 280 2020-04-19 07:08 20 * 281 2020-04-19 07:09 21 ** 282 2020-04-19 07:10 21 ** 283 2020-04-19 07:11 22 *** 284 2020-04-19 07:12 22 *** 285 2020-04-19 07:13 23 **** ... ..( 3 skipped). .. **** 289 2020-04-19 07:17 23 **** 290 2020-04-19 07:18 24 ***** 291 2020-04-19 07:19 24 ***** 292 2020-04-19 07:20 24 ***** 293 2020-04-19 07:21 25 ****** 294 2020-04-19 07:22 25 ****** 295 2020-04-19 07:23 26 ******* ... ..( 7 skipped). .. ******* 303 2020-04-19 07:31 26 ******* 304 2020-04-19 07:32 27 ******** ... ..( 9 skipped). .. ******** 314 2020-04-19 07:42 27 ******** 315 2020-04-19 07:43 28 ********* ... ..( 18 skipped). .. ********* 334 2020-04-19 08:02 28 ********* 335 2020-04-19 08:03 29 ********** ... ..( 17 skipped). .. ********** 353 2020-04-19 08:21 29 ********** 354 2020-04-19 08:22 28 ********* 355 2020-04-19 08:23 29 ********** ... ..( 99 skipped). .. ********** 455 2020-04-19 10:03 29 ********** 456 2020-04-19 10:04 30 *********** 457 2020-04-19 10:05 29 ********** ... ..( 6 skipped). .. ********** 464 2020-04-19 10:12 29 ********** 465 2020-04-19 10:13 30 *********** 466 2020-04-19 10:14 29 ********** ... ..( 7 skipped). .. ********** 474 2020-04-19 10:22 29 ********** 475 2020-04-19 10:23 30 *********** 476 2020-04-19 10:24 29 ********** ... ..( 7 skipped). .. ********** 6 2020-04-19 10:32 29 ********** 7 2020-04-19 10:33 30 *********** 8 2020-04-19 10:34 29 ********** ... ..( 7 skipped). .. ********** 16 2020-04-19 10:42 29 ********** 17 2020-04-19 10:43 30 *********** ... ..( 37 skipped). .. *********** 55 2020-04-19 11:21 30 *********** 56 2020-04-19 11:22 31 ************ 57 2020-04-19 11:23 30 *********** ... ..( 36 skipped). .. *********** 94 2020-04-19 12:00 30 *********** 95 2020-04-19 12:01 31 ************ ... ..( 2 skipped). .. ************ 98 2020-04-19 12:04 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 15 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 10 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 15891 Vendor specific