/dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.14-desktop-1omv4002] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: LSILOGIC Product: Logical Volume Revision: 3000 User Capacity: 497,998,102,528 bytes [497 GB] Logical block size: 512 bytes Logical Unit id: 0x600508e000000000c447e258784f9107 Device type: disk Local Time is: Tue Aug 31 22:32:03 2021 UTC SMART support is: Unavailable - device lacks SMART capability. Read Cache is: Enabled Writeback Cache is: Disabled === START OF READ SMART DATA SECTION === Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported Device does not support Self Test logging Device does not support Background scan results logging /dev/sg2 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.14-desktop-1omv4002] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE3 Serial ATA Device Model: WD2502ABYS-23B7A0 39M4511 42C0463IBM Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.03B05 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Tue Aug 31 22:32:03 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown (0xe001) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 58) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 201 199 021 - 941 4 Start_Stop_Count -O--CK 100 100 000 - 325 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 001 001 000 - 75073 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 325 192 Power-Off_Retract_Count -O--CK 200 200 000 - 323 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 110 099 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 7 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 [6] occurred at disk power-on lifetime: 9371 hours (390 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 1b 00 41 29 40 00 Error: UNC at LBA = 0x1b004129 = 453001513 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 3e 00 00 00 00 00 63 47 42 40 00 00:07:07.876 READ FPDMA QUEUED 60 00 10 00 18 00 00 01 18 68 70 40 00 00:07:07.875 READ FPDMA QUEUED 60 00 20 00 10 00 00 01 2d d7 42 40 00 00:07:07.872 READ FPDMA QUEUED 60 00 08 00 10 00 00 02 b2 48 78 40 00 00:07:07.865 READ FPDMA QUEUED 60 00 08 00 10 00 00 02 b2 48 70 40 00 00:07:07.865 READ FPDMA QUEUED Error 6 [5] occurred at disk power-on lifetime: 9371 hours (390 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 1b 00 41 29 40 00 Error: UNC at LBA = 0x1b004129 = 453001513 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 00 00 00 00 41 1b 29 40 00 00:03:35.532 READ FPDMA QUEUED e5 00 00 00 00 00 00 00 00 00 00 00 00 00:03:35.102 CHECK POWER MODE e5 00 00 00 00 00 00 00 00 00 00 00 00 00:03:35.100 CHECK POWER MODE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:03:35.098 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:03:35.096 IDENTIFY DEVICE Error 5 [4] occurred at disk power-on lifetime: 9371 hours (390 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 1b 00 41 29 40 00 Error: UNC at LBA = 0x1b004129 = 453001513 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 00 00 00 00 41 1b 29 40 00 00:03:30.787 READ FPDMA QUEUED ef 00 66 00 00 00 00 00 00 00 00 00 00 00:03:30.546 SET FEATURES [Disable revert defaults] ef 00 82 00 00 00 00 00 00 00 00 00 00 00:03:30.546 SET FEATURES [Disable write cache] ef 00 aa 00 00 00 00 00 00 00 00 00 00 00:03:30.546 SET FEATURES [Enable read look-ahead] ef 00 03 00 46 00 00 00 00 00 00 00 00 00:03:30.546 SET FEATURES [Set transfer mode] Error 4 [3] occurred at disk power-on lifetime: 9371 hours (390 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 1b 00 41 29 40 00 Error: UNC at LBA = 0x1b004129 = 453001513 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 00 00 00 00 41 1b 29 40 00 00:03:25.888 READ FPDMA QUEUED 61 00 01 00 00 00 00 1d 1b 99 6f 40 00 00:03:25.757 WRITE FPDMA QUEUED 61 00 05 00 00 00 00 1d 1b 99 70 40 00 00:03:25.750 WRITE FPDMA QUEUED 60 00 01 00 00 00 00 1d 1b 99 74 40 00 00:03:25.749 READ FPDMA QUEUED 61 00 01 00 00 00 00 1d 1b 99 6f 40 00 00:03:25.739 WRITE FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 9371 hours (390 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 1b 00 41 29 40 00 Error: UNC at LBA = 0x1b004129 = 453001513 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 00 00 00 00 41 1b 29 40 00 00:03:21.801 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:03:21.795 READ LOG EXT 60 00 01 00 00 00 00 00 41 1b 29 40 00 00:03:18.068 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 41 1b 28 40 00 00:03:18.054 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:03:18.049 READ LOG EXT Error 2 [1] occurred at disk power-on lifetime: 9371 hours (390 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 1b 00 41 29 40 00 Error: UNC at LBA = 0x1b004129 = 453001513 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 01 00 00 00 00 00 41 1b 29 40 00 00:03:18.068 READ FPDMA QUEUED 60 00 01 00 00 00 00 00 41 1b 28 40 00 00:03:18.054 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:03:18.049 READ LOG EXT 60 00 08 00 00 00 00 00 41 1b 28 40 00 00:03:14.799 READ FPDMA QUEUED 61 00 08 00 00 00 00 00 34 24 80 40 00 00:03:14.780 WRITE FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 9371 hours (390 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 1b 00 41 29 40 00 Error: UNC at LBA = 0x1b004129 = 453001513 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 00 41 1b 28 40 00 00:03:14.799 READ FPDMA QUEUED 61 00 08 00 00 00 00 00 34 24 80 40 00 00:03:14.780 WRITE FPDMA QUEUED 61 00 01 00 00 00 00 1d 1b 99 6f 40 00 00:03:14.502 WRITE FPDMA QUEUED 61 00 04 00 00 00 00 1d 1b 99 76 40 00 00:03:14.496 WRITE FPDMA QUEUED 60 00 05 00 00 00 00 1d 1b 99 76 40 00 00:03:14.491 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 26/33 Celsius Lifetime Min/Max Temperature: 26/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (306) Index Estimated Time Temperature Celsius 307 2021-08-31 14:35 33 ************** ... ..( 53 skipped). .. ************** 361 2021-08-31 15:29 33 ************** 362 2021-08-31 15:30 36 ***************** 363 2021-08-31 15:31 36 ***************** 364 2021-08-31 15:32 36 ***************** 365 2021-08-31 15:33 35 **************** 366 2021-08-31 15:34 36 ***************** 367 2021-08-31 15:35 36 ***************** 368 2021-08-31 15:36 35 **************** 369 2021-08-31 15:37 36 ***************** 370 2021-08-31 15:38 36 ***************** 371 2021-08-31 15:39 35 **************** 372 2021-08-31 15:40 35 **************** 373 2021-08-31 15:41 35 **************** 374 2021-08-31 15:42 36 ***************** 375 2021-08-31 15:43 35 **************** 376 2021-08-31 15:44 36 ***************** 377 2021-08-31 15:45 35 **************** 378 2021-08-31 15:46 36 ***************** ... ..( 6 skipped). .. ***************** 385 2021-08-31 15:53 36 ***************** 386 2021-08-31 15:54 37 ****************** 387 2021-08-31 15:55 36 ***************** ... ..( 7 skipped). .. ***************** 395 2021-08-31 16:03 36 ***************** 396 2021-08-31 16:04 35 **************** ... ..( 6 skipped). .. **************** 403 2021-08-31 16:11 35 **************** 404 2021-08-31 16:12 36 ***************** ... ..( 8 skipped). .. ***************** 413 2021-08-31 16:21 36 ***************** 414 2021-08-31 16:22 35 **************** ... ..(188 skipped). .. **************** 125 2021-08-31 19:31 35 **************** 126 2021-08-31 19:32 36 ***************** 127 2021-08-31 19:33 35 **************** ... ..( 55 skipped). .. **************** 183 2021-08-31 20:29 35 **************** 184 2021-08-31 20:30 36 ***************** 185 2021-08-31 20:31 36 ***************** 186 2021-08-31 20:32 36 ***************** 187 2021-08-31 20:33 ? - 188 2021-08-31 20:34 35 **************** ... ..( 3 skipped). .. **************** 192 2021-08-31 20:38 35 **************** 193 2021-08-31 20:39 ? - 194 2021-08-31 20:40 35 **************** ... ..( 7 skipped). .. **************** 202 2021-08-31 20:48 35 **************** 203 2021-08-31 20:49 36 ***************** ... ..( 2 skipped). .. ***************** 206 2021-08-31 20:52 36 ***************** 207 2021-08-31 20:53 35 **************** 208 2021-08-31 20:54 35 **************** 209 2021-08-31 20:55 36 ***************** ... ..( 5 skipped). .. ***************** 215 2021-08-31 21:01 36 ***************** 216 2021-08-31 21:02 37 ****************** ... ..( 2 skipped). .. ****************** 219 2021-08-31 21:05 37 ****************** 220 2021-08-31 21:06 36 ***************** 221 2021-08-31 21:07 37 ****************** 222 2021-08-31 21:08 37 ****************** 223 2021-08-31 21:09 37 ****************** 224 2021-08-31 21:10 36 ***************** 225 2021-08-31 21:11 37 ****************** ... ..( 2 skipped). .. ****************** 228 2021-08-31 21:14 37 ****************** 229 2021-08-31 21:15 36 ***************** 230 2021-08-31 21:16 36 ***************** 231 2021-08-31 21:17 37 ****************** 232 2021-08-31 21:18 37 ****************** 233 2021-08-31 21:19 36 ***************** ... ..( 11 skipped). .. ***************** 245 2021-08-31 21:31 36 ***************** 246 2021-08-31 21:32 35 **************** 247 2021-08-31 21:33 35 **************** 248 2021-08-31 21:34 36 ***************** 249 2021-08-31 21:35 35 **************** ... ..( 9 skipped). .. **************** 259 2021-08-31 21:45 35 **************** 260 2021-08-31 21:46 ? - 261 2021-08-31 21:47 27 ******** 262 2021-08-31 21:48 27 ******** 263 2021-08-31 21:49 28 ********* 264 2021-08-31 21:50 29 ********** 265 2021-08-31 21:51 29 ********** 266 2021-08-31 21:52 30 *********** 267 2021-08-31 21:53 30 *********** 268 2021-08-31 21:54 30 *********** 269 2021-08-31 21:55 31 ************ 270 2021-08-31 21:56 ? - 271 2021-08-31 21:57 26 ******* 272 2021-08-31 21:58 26 ******* 273 2021-08-31 21:59 26 ******* 274 2021-08-31 22:00 27 ******** 275 2021-08-31 22:01 28 ********* 276 2021-08-31 22:02 29 ********** 277 2021-08-31 22:03 29 ********** 278 2021-08-31 22:04 29 ********** 279 2021-08-31 22:05 30 *********** ... ..( 2 skipped). .. *********** 282 2021-08-31 22:08 30 *********** 283 2021-08-31 22:09 31 ************ ... ..( 3 skipped). .. ************ 287 2021-08-31 22:13 31 ************ 288 2021-08-31 22:14 32 ************* ... ..( 9 skipped). .. ************* 298 2021-08-31 22:24 32 ************* 299 2021-08-31 22:25 33 ************** ... ..( 6 skipped). .. ************** 306 2021-08-31 22:32 33 ************** SMART WRITE LOG returns COUNT and LBA_LOW register unchanged SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x8000 4 5553 Vendor specific /dev/sg3 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.14-desktop-1omv4002] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital RE3 Serial ATA Device Model: WD2502ABYS-23B7A0 39M4511 42C0463IBM Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 02.03B05 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Tue Aug 31 22:32:03 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown (0xe001) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 58) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 199 198 021 - 1008 4 Start_Stop_Count -O--CK 100 100 000 - 336 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 001 001 000 - 75073 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 334 192 Power-Off_Retract_Count -O--CK 200 200 000 - 332 193 Load_Cycle_Count -O--CK 200 200 000 - 3 194 Temperature_Celsius -O---K 113 100 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 24/30 Celsius Lifetime Min/Max Temperature: 25/43 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (183) Index Estimated Time Temperature Celsius 184 2021-08-31 14:35 30 *********** ... ..( 53 skipped). .. *********** 238 2021-08-31 15:29 30 *********** 239 2021-08-31 15:30 34 *************** ... ..( 4 skipped). .. *************** 244 2021-08-31 15:35 34 *************** 245 2021-08-31 15:36 33 ************** 246 2021-08-31 15:37 34 *************** ... ..( 26 skipped). .. *************** 273 2021-08-31 16:04 34 *************** 274 2021-08-31 16:05 33 ************** 275 2021-08-31 16:06 33 ************** 276 2021-08-31 16:07 33 ************** 277 2021-08-31 16:08 34 *************** 278 2021-08-31 16:09 33 ************** 279 2021-08-31 16:10 33 ************** 280 2021-08-31 16:11 33 ************** 281 2021-08-31 16:12 34 *************** ... ..(208 skipped). .. *************** 12 2021-08-31 19:41 34 *************** 13 2021-08-31 19:42 33 ************** ... ..( 44 skipped). .. ************** 58 2021-08-31 20:27 33 ************** 59 2021-08-31 20:28 34 *************** ... ..( 3 skipped). .. *************** 63 2021-08-31 20:32 34 *************** 64 2021-08-31 20:33 ? - 65 2021-08-31 20:34 34 *************** ... ..( 3 skipped). .. *************** 69 2021-08-31 20:38 34 *************** 70 2021-08-31 20:39 ? - 71 2021-08-31 20:40 34 *************** ... ..( 57 skipped). .. *************** 129 2021-08-31 21:38 34 *************** 130 2021-08-31 21:39 33 ************** ... ..( 5 skipped). .. ************** 136 2021-08-31 21:45 33 ************** 137 2021-08-31 21:46 ? - 138 2021-08-31 21:47 26 ******* 139 2021-08-31 21:48 26 ******* 140 2021-08-31 21:49 26 ******* 141 2021-08-31 21:50 27 ******** 142 2021-08-31 21:51 28 ********* 143 2021-08-31 21:52 28 ********* 144 2021-08-31 21:53 29 ********** 145 2021-08-31 21:54 29 ********** 146 2021-08-31 21:55 29 ********** 147 2021-08-31 21:56 ? - 148 2021-08-31 21:57 24 ***** 149 2021-08-31 21:58 25 ****** 150 2021-08-31 21:59 25 ****** 151 2021-08-31 22:00 26 ******* 152 2021-08-31 22:01 26 ******* 153 2021-08-31 22:02 27 ******** 154 2021-08-31 22:03 27 ******** 155 2021-08-31 22:04 28 ********* 156 2021-08-31 22:05 29 ********** ... ..( 3 skipped). .. ********** 160 2021-08-31 22:09 29 ********** 161 2021-08-31 22:10 30 *********** ... ..( 21 skipped). .. *********** 183 2021-08-31 22:32 30 *********** SMART WRITE LOG returns COUNT and LBA_LOW register unchanged SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x8000 4 5552 Vendor specific