/dev/nvme0n1 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-51-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WDS100T3X0C-00SJG0 Serial Number: -- Firmware Version: 111110WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 1,000,204,886,016 [1.00 TB] Unallocated NVM Capacity: 0 Controller ID: 8215 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,000,204,886,016 [1.00 TB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Thu Oct 15 03:22:22 2020 UTC Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 88 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.00W - - 0 0 0 0 0 0 1 + 3.50W - - 1 1 1 1 0 0 2 + 3.00W - - 2 2 2 2 0 0 3 - 0.1000W - - 3 3 3 3 4000 10000 4 - 0.0025W - - 4 4 4 4 4000 40000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 41 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 3,389 [1.73 GB] Data Units Written: 9,394 [4.80 GB] Host Read Commands: 43,884 Host Write Commands: 105,331 Controller Busy Time: 0 Power Cycles: 13 Power On Hours: 1 Unsafe Shutdowns: 6 Media and Data Integrity Errors: 0 Error Information Log Entries: 1 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, max 256 entries) No Errors Logged /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-51-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST6000VN0033-2EE110 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SC60 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 15 03:22:22 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 607) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 081 064 044 - 136988053 3 Spin_Up_Time PO---- 087 086 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 125 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 082 060 045 - 147356941 9 Power_On_Hours -O--CK 079 079 000 - 18914 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 130 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 066 062 040 - 34 (Min/Max 34/34) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 1959 192 Power-Off_Retract_Count -O--CK 100 100 000 - 61 193 Load_Cycle_Count -O--CK 097 097 000 - 6322 194 Temperature_Celsius -O---K 034 040 000 - 34 (0 21 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 005 002 000 - 136988053 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 1348 (44 166 0) 241 Total_LBAs_Written ------ 100 253 000 - 19180582975 242 Total_LBAs_Read ------ 100 253 000 - 49332957720 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xad GPL VS 16 Device vendor specific log 0xb0 GPL VS 9048 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xd1 GPL VS 264 Device vendor specific log 0xd2 GPL VS 10000 Device vendor specific log 0xd4 GPL VS 2048 Device vendor specific log 0xda GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 34/34 Celsius Lifetime Min/Max Temperature: 21/38 Celsius Under/Over Temperature Limit Count: 0/1 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 10/25 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (93) Index Estimated Time Temperature Celsius 94 2020-10-09 22:18 35 **************** ... ..( 11 skipped). .. **************** 106 2020-10-10 10:06 35 **************** 107 2020-10-10 11:05 34 *************** 108 2020-10-10 12:04 35 **************** ... ..( 5 skipped). .. **************** 114 2020-10-10 17:58 35 **************** 115 2020-10-10 18:57 36 ***************** 116 2020-10-10 19:56 35 **************** ... ..( 7 skipped). .. **************** 124 2020-10-11 03:48 35 **************** 125 2020-10-11 04:47 34 *************** 126 2020-10-11 05:46 35 **************** 127 2020-10-11 06:45 35 **************** 0 2020-10-11 07:44 ? - 1 2020-10-11 08:43 25 ****** 2 2020-10-11 09:42 ? - 3 2020-10-11 10:41 26 ******* 4 2020-10-11 11:40 ? - 5 2020-10-11 12:39 26 ******* 6 2020-10-11 13:38 ? - 7 2020-10-11 14:37 27 ******** 8 2020-10-11 15:36 ? - 9 2020-10-11 16:35 33 ************** 10 2020-10-11 17:34 ? - 11 2020-10-11 18:33 33 ************** 12 2020-10-11 19:32 ? - 13 2020-10-11 20:31 34 *************** 14 2020-10-11 21:30 ? - 15 2020-10-11 22:29 34 *************** 16 2020-10-11 23:28 ? - 17 2020-10-12 00:27 34 *************** 18 2020-10-12 01:26 ? - 19 2020-10-12 02:25 34 *************** 20 2020-10-12 03:24 ? - 21 2020-10-12 04:23 33 ************** 22 2020-10-12 05:22 ? - 23 2020-10-12 06:21 34 *************** 24 2020-10-12 07:20 ? - 25 2020-10-12 08:19 34 *************** 26 2020-10-12 09:18 ? - 27 2020-10-12 10:17 34 *************** 28 2020-10-12 11:16 ? - 29 2020-10-12 12:15 34 *************** 30 2020-10-12 13:14 ? - 31 2020-10-12 14:13 34 *************** 32 2020-10-12 15:12 ? - 33 2020-10-12 16:11 34 *************** 34 2020-10-12 17:10 ? - 35 2020-10-12 18:09 33 ************** 36 2020-10-12 19:08 ? - 37 2020-10-12 20:07 33 ************** 38 2020-10-12 21:06 ? - 39 2020-10-12 22:05 33 ************** 40 2020-10-12 23:04 ? - 41 2020-10-13 00:03 33 ************** 42 2020-10-13 01:02 ? - 43 2020-10-13 02:01 33 ************** 44 2020-10-13 03:00 ? - 45 2020-10-13 03:59 33 ************** 46 2020-10-13 04:58 ? - 47 2020-10-13 05:57 33 ************** 48 2020-10-13 06:56 ? - 49 2020-10-13 07:55 31 ************ 50 2020-10-13 08:54 ? - 51 2020-10-13 09:53 32 ************* 52 2020-10-13 10:52 ? - 53 2020-10-13 11:51 32 ************* 54 2020-10-13 12:50 ? - 55 2020-10-13 13:49 32 ************* 56 2020-10-13 14:48 ? - 57 2020-10-13 15:47 32 ************* 58 2020-10-13 16:46 ? - 59 2020-10-13 17:45 32 ************* 60 2020-10-13 18:44 ? - 61 2020-10-13 19:43 33 ************** 62 2020-10-13 20:42 ? - 63 2020-10-13 21:41 24 ***** 64 2020-10-13 22:40 33 ************** ... ..( 2 skipped). .. ************** 67 2020-10-14 01:37 33 ************** 68 2020-10-14 02:36 34 *************** 69 2020-10-14 03:35 34 *************** 70 2020-10-14 04:34 34 *************** 71 2020-10-14 05:33 33 ************** 72 2020-10-14 06:32 33 ************** 73 2020-10-14 07:31 34 *************** 74 2020-10-14 08:30 34 *************** 75 2020-10-14 09:29 33 ************** 76 2020-10-14 10:28 ? - 77 2020-10-14 11:27 30 *********** 78 2020-10-14 12:26 ? - 79 2020-10-14 13:25 33 ************** 80 2020-10-14 14:24 ? - 81 2020-10-14 15:23 32 ************* 82 2020-10-14 16:22 ? - 83 2020-10-14 17:21 32 ************* 84 2020-10-14 18:20 ? - 85 2020-10-14 19:19 32 ************* 86 2020-10-14 20:18 ? - 87 2020-10-14 21:17 31 ************ 88 2020-10-14 22:16 ? - 89 2020-10-14 23:15 33 ************** 90 2020-10-15 00:14 ? - 91 2020-10-15 01:13 34 *************** 92 2020-10-15 02:12 ? - 93 2020-10-15 03:11 34 *************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 130 --- Lifetime Power-On Resets 0x01 0x010 4 18914 --- Power-on Hours 0x01 0x018 6 19243544831 --- Logical Sectors Written 0x01 0x020 6 12060915 --- Number of Write Commands 0x01 0x028 6 49388576258 --- Logical Sectors Read 0x01 0x030 6 176754551 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 1225012887 N-- Spindle Motor Power-on Hours 0x03 0x010 4 1224995540 N-- Head Flying Hours 0x03 0x018 4 6322 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 59 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 --- Current Temperature 0x05 0x010 1 34 --- Average Short Term Temperature 0x05 0x018 1 34 --- Average Long Term Temperature 0x05 0x020 1 38 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 36 --- Highest Average Short Term Temperature 0x05 0x038 1 27 --- Lowest Average Short Term Temperature 0x05 0x040 1 34 --- Highest Average Long Term Temperature 0x05 0x048 1 29 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 232 --- Number of Hardware Resets 0x06 0x010 4 95 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-51-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST6000VN0033-2EE110 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SC60 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 15 03:22:22 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 633) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 080 064 044 - 100322590 3 Spin_Up_Time PO---- 087 086 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 129 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 083 060 045 - 211498909 9 Power_On_Hours -O--CK 079 079 000 - 18914 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 131 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 065 060 040 - 35 (Min/Max 35/35) 191 G-Sense_Error_Rate -O--CK 098 098 000 - 5229 192 Power-Off_Retract_Count -O--CK 100 100 000 - 63 193 Load_Cycle_Count -O--CK 096 096 000 - 9848 194 Temperature_Celsius -O---K 035 040 000 - 35 (0 21 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 006 001 000 - 100322590 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 1795 (212 5 0) 241 Total_LBAs_Written ------ 100 253 000 - 19694950518 242 Total_LBAs_Read ------ 100 253 000 - 46601409742 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 2048 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x15 GPL R/W 1 Rebuild Assist log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa6 GPL VS 192 Device vendor specific log 0xa8-0xa9 GPL,SL VS 136 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xad GPL VS 16 Device vendor specific log 0xb0 GPL VS 9048 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xd1 GPL VS 264 Device vendor specific log 0xd2 GPL VS 10000 Device vendor specific log 0xd4 GPL VS 2048 Device vendor specific log 0xda GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 35/35 Celsius Lifetime Min/Max Temperature: 21/40 Celsius Under/Over Temperature Limit Count: 0/1 SCT Temperature History Version: 2 Temperature Sampling Period: 3 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 10/25 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (99) Index Estimated Time Temperature Celsius 100 2020-10-09 22:18 35 **************** 101 2020-10-09 23:17 36 ***************** 102 2020-10-10 00:16 36 ***************** 103 2020-10-10 01:15 35 **************** 104 2020-10-10 02:14 36 ***************** 105 2020-10-10 03:13 35 **************** ... ..( 3 skipped). .. **************** 109 2020-10-10 07:09 35 **************** 110 2020-10-10 08:08 36 ***************** 111 2020-10-10 09:07 36 ***************** 112 2020-10-10 10:06 35 **************** 113 2020-10-10 11:05 36 ***************** 114 2020-10-10 12:04 36 ***************** 115 2020-10-10 13:03 35 **************** 116 2020-10-10 14:02 36 ***************** 117 2020-10-10 15:01 35 **************** 118 2020-10-10 16:00 36 ***************** ... ..( 2 skipped). .. ***************** 121 2020-10-10 18:57 36 ***************** 122 2020-10-10 19:56 35 **************** ... ..( 3 skipped). .. **************** 126 2020-10-10 23:52 35 **************** 127 2020-10-11 00:51 36 ***************** 0 2020-10-11 01:50 35 **************** 1 2020-10-11 02:49 35 **************** 2 2020-10-11 03:48 35 **************** 3 2020-10-11 04:47 36 ***************** 4 2020-10-11 05:46 ? - 5 2020-10-11 06:45 25 ****** 6 2020-10-11 07:44 ? - 7 2020-10-11 08:43 26 ******* 8 2020-10-11 09:42 ? - 9 2020-10-11 10:41 26 ******* 10 2020-10-11 11:40 ? - 11 2020-10-11 12:39 27 ******** 12 2020-10-11 13:38 ? - 13 2020-10-11 14:37 28 ********* 14 2020-10-11 15:36 ? - 15 2020-10-11 16:35 33 ************** 16 2020-10-11 17:34 ? - 17 2020-10-11 18:33 34 *************** 18 2020-10-11 19:32 ? - 19 2020-10-11 20:31 34 *************** 20 2020-10-11 21:30 ? - 21 2020-10-11 22:29 34 *************** 22 2020-10-11 23:28 ? - 23 2020-10-12 00:27 34 *************** 24 2020-10-12 01:26 ? - 25 2020-10-12 02:25 35 **************** 26 2020-10-12 03:24 ? - 27 2020-10-12 04:23 33 ************** 28 2020-10-12 05:22 ? - 29 2020-10-12 06:21 34 *************** 30 2020-10-12 07:20 ? - 31 2020-10-12 08:19 34 *************** 32 2020-10-12 09:18 ? - 33 2020-10-12 10:17 34 *************** 34 2020-10-12 11:16 ? - 35 2020-10-12 12:15 34 *************** 36 2020-10-12 13:14 ? - 37 2020-10-12 14:13 34 *************** 38 2020-10-12 15:12 ? - 39 2020-10-12 16:11 35 **************** 40 2020-10-12 17:10 ? - 41 2020-10-12 18:09 34 *************** 42 2020-10-12 19:08 ? - 43 2020-10-12 20:07 33 ************** 44 2020-10-12 21:06 ? - 45 2020-10-12 22:05 34 *************** 46 2020-10-12 23:04 ? - 47 2020-10-13 00:03 34 *************** 48 2020-10-13 01:02 ? - 49 2020-10-13 02:01 34 *************** 50 2020-10-13 03:00 ? - 51 2020-10-13 03:59 34 *************** 52 2020-10-13 04:58 ? - 53 2020-10-13 05:57 34 *************** 54 2020-10-13 06:56 ? - 55 2020-10-13 07:55 32 ************* 56 2020-10-13 08:54 ? - 57 2020-10-13 09:53 33 ************** 58 2020-10-13 10:52 ? - 59 2020-10-13 11:51 33 ************** 60 2020-10-13 12:50 ? - 61 2020-10-13 13:49 33 ************** 62 2020-10-13 14:48 ? - 63 2020-10-13 15:47 33 ************** 64 2020-10-13 16:46 ? - 65 2020-10-13 17:45 33 ************** 66 2020-10-13 18:44 ? - 67 2020-10-13 19:43 33 ************** 68 2020-10-13 20:42 ? - 69 2020-10-13 21:41 24 ***** 70 2020-10-13 22:40 34 *************** ... ..( 3 skipped). .. *************** 74 2020-10-14 02:36 34 *************** 75 2020-10-14 03:35 35 **************** 76 2020-10-14 04:34 35 **************** 77 2020-10-14 05:33 34 *************** ... ..( 3 skipped). .. *************** 81 2020-10-14 09:29 34 *************** 82 2020-10-14 10:28 ? - 83 2020-10-14 11:27 31 ************ 84 2020-10-14 12:26 ? - 85 2020-10-14 13:25 33 ************** 86 2020-10-14 14:24 ? - 87 2020-10-14 15:23 32 ************* 88 2020-10-14 16:22 ? - 89 2020-10-14 17:21 32 ************* 90 2020-10-14 18:20 ? - 91 2020-10-14 19:19 32 ************* 92 2020-10-14 20:18 ? - 93 2020-10-14 21:17 32 ************* 94 2020-10-14 22:16 ? - 95 2020-10-14 23:15 33 ************** 96 2020-10-15 00:14 ? - 97 2020-10-15 01:13 34 *************** 98 2020-10-15 02:12 ? - 99 2020-10-15 03:11 35 **************** SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 131 --- Lifetime Power-On Resets 0x01 0x010 4 18914 --- Power-on Hours 0x01 0x018 6 19683087702 --- Logical Sectors Written 0x01 0x020 6 12341192 --- Number of Write Commands 0x01 0x028 6 46607526093 --- Logical Sectors Read 0x01 0x030 6 181675561 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 481763468 N-- Spindle Motor Power-on Hours 0x03 0x010 4 481746541 N-- Head Flying Hours 0x03 0x018 4 9848 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 59 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 34 --- Average Short Term Temperature 0x05 0x018 1 35 --- Average Long Term Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 36 --- Highest Average Short Term Temperature 0x05 0x038 1 28 --- Lowest Average Short Term Temperature 0x05 0x040 1 35 --- Highest Average Long Term Temperature 0x05 0x048 1 29 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 245 --- Number of Hardware Resets 0x06 0x010 4 96 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-51-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD10SPCX-24HWST0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 15 03:22:22 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (16500) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 185) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 198 198 051 - 40415 3 Spin_Up_Time POS--K 189 188 021 - 1533 4 Start_Stop_Count -O--CK 001 001 000 - 204416 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-K 200 200 051 - 0 9 Power_On_Hours -O--CK 032 032 000 - 49932 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 150 192 Power-Off_Retract_Count -O--CK 200 200 000 - 102 193 Load_Cycle_Count -O--CK 001 001 000 - 1216055 194 Temperature_Celsius -O---K 117 105 000 - 30 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 198 198 000 - 365 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 1 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 240 Head_Flying_Hours -O--CK 036 036 000 - 47293 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 38 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1420 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1420 [3] occurred at disk power-on lifetime: 49929 hours (2080 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 48 ec 38 40 00 Error: UNC at LBA = 0x6c48ec38 = 1816718392 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 c0 00 00 6c 48 ec 38 40 08 09:20:33.137 READ FPDMA QUEUED 60 00 08 00 b8 00 00 6c 48 ec 30 40 08 09:20:32.772 READ FPDMA QUEUED 60 00 08 00 b0 00 00 6c 48 ec 28 40 08 09:20:32.418 READ FPDMA QUEUED 60 00 08 00 a8 00 00 6c 48 ec 20 40 08 09:20:32.385 READ FPDMA QUEUED 60 00 08 00 a0 00 00 6c 48 ec 18 40 08 09:20:32.352 READ FPDMA QUEUED Error 1419 [2] occurred at disk power-on lifetime: 49929 hours (2080 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 48 ec 38 40 00 Error: UNC at LBA = 0x6c48ec38 = 1816718392 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 e0 00 00 51 d8 c0 00 40 08 09:20:26.425 READ FPDMA QUEUED 60 01 00 00 d8 00 00 6c 48 ec 08 40 08 09:20:26.425 READ FPDMA QUEUED 60 01 00 00 d0 00 00 6c 48 eb 08 40 08 09:20:24.597 READ FPDMA QUEUED 60 01 00 00 c8 00 00 6c 48 ea 08 40 08 09:20:24.577 READ FPDMA QUEUED 60 02 00 00 c0 00 00 6c 48 e8 08 40 08 09:20:24.576 READ FPDMA QUEUED Error 1418 [1] occurred at disk power-on lifetime: 49929 hours (2080 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 48 ec 38 40 00 Error: UNC at LBA = 0x6c48ec38 = 1816718392 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 38 00 00 6c 48 ec 38 40 08 09:19:27.429 READ FPDMA QUEUED 61 00 10 00 30 00 00 00 03 8c 38 40 08 09:19:27.429 WRITE FPDMA QUEUED 61 00 08 00 28 00 00 00 03 8a 18 40 08 09:19:27.429 WRITE FPDMA QUEUED 61 00 08 00 20 00 00 00 03 86 28 40 08 09:19:27.429 WRITE FPDMA QUEUED 61 00 08 00 18 00 00 00 03 86 08 40 08 09:19:27.429 WRITE FPDMA QUEUED Error 1417 [0] occurred at disk power-on lifetime: 49929 hours (2080 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 48 ec 38 40 00 Error: UNC at LBA = 0x6c48ec38 = 1816718392 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 a0 00 00 6c 48 ec 38 40 08 09:19:23.542 READ FPDMA QUEUED 60 00 08 00 98 00 00 6c 48 ec 30 40 08 09:19:23.531 READ FPDMA QUEUED 60 00 08 00 90 00 00 6c 48 ec 28 40 08 09:19:23.520 READ FPDMA QUEUED 60 00 08 00 88 00 00 6c 48 ec 20 40 08 09:19:23.509 READ FPDMA QUEUED 60 00 08 00 80 00 00 6c 48 ec 18 40 08 09:19:23.476 READ FPDMA QUEUED Error 1416 [23] occurred at disk power-on lifetime: 49929 hours (2080 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 48 ec 38 40 00 Error: UNC at LBA = 0x6c48ec38 = 1816718392 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 01 00 00 c0 00 00 51 d8 c0 00 40 08 09:19:17.693 READ FPDMA QUEUED 60 01 00 00 b8 00 00 6c 48 ec 08 40 08 09:19:17.693 READ FPDMA QUEUED 60 01 00 00 b0 00 00 6c 48 eb 08 40 08 09:19:15.335 READ FPDMA QUEUED 60 01 00 00 a8 00 00 6c 48 ea 08 40 08 09:19:15.305 READ FPDMA QUEUED 60 02 00 00 a0 00 00 6c 48 e8 08 40 08 09:19:15.304 READ FPDMA QUEUED Error 1415 [22] occurred at disk power-on lifetime: 49929 hours (2080 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6e 41 28 10 40 00 Error: UNC at LBA = 0x6e412810 = 1849763856 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 b8 00 00 6e 41 28 10 40 08 09:15:21.200 READ FPDMA QUEUED 60 00 08 00 b0 00 00 66 04 12 b8 40 08 09:15:21.189 READ FPDMA QUEUED 60 00 08 00 a8 00 00 6e 41 36 b0 40 08 09:15:20.591 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 09:15:20.589 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 09:15:20.589 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 1414 [21] occurred at disk power-on lifetime: 49929 hours (2080 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6e 41 27 c8 40 00 Error: UNC at LBA = 0x6e4127c8 = 1849763784 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 18 00 00 6e 41 27 c8 40 08 09:15:16.630 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 09:15:16.583 FLUSH CACHE EXT 60 00 58 00 00 00 00 6c 04 64 40 40 08 09:15:15.812 READ FPDMA QUEUED 61 00 08 00 f0 00 00 06 44 b4 08 40 08 09:15:15.812 WRITE FPDMA QUEUED ea 00 00 00 00 00 00 00 00 00 00 e0 08 09:15:15.709 FLUSH CACHE EXT Error 1413 [20] occurred at disk power-on lifetime: 49929 hours (2080 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 72 45 56 a8 40 00 Error: UNC at LBA = 0x724556a8 = 1917146792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 e8 00 00 72 45 56 a8 40 08 09:14:57.716 READ FPDMA QUEUED ef 00 10 00 02 00 00 00 00 00 00 a0 08 09:14:57.716 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 09:14:57.716 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 09:14:57.715 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 09:14:57.715 SET FEATURES [Set transfer mode] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 29/31 Celsius Lifetime Min/Max Temperature: 21/42 Celsius Specified Max Operating Temperature: 31 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (32) Index Estimated Time Temperature Celsius 33 2020-10-15 01:15 35 **************** ... ..( 36 skipped). .. **************** 70 2020-10-15 01:52 35 **************** 71 2020-10-15 01:53 ? - 72 2020-10-15 01:54 27 ******** 73 2020-10-15 01:55 29 ********** 74 2020-10-15 01:56 29 ********** 75 2020-10-15 01:57 30 *********** ... ..( 2 skipped). .. *********** 78 2020-10-15 02:00 30 *********** 79 2020-10-15 02:01 ? - 80 2020-10-15 02:02 30 *********** 81 2020-10-15 02:03 ? - 82 2020-10-15 02:04 30 *********** 83 2020-10-15 02:05 32 ************* 84 2020-10-15 02:06 32 ************* 85 2020-10-15 02:07 ? - 86 2020-10-15 02:08 29 ********** 87 2020-10-15 02:09 ? - 88 2020-10-15 02:10 30 *********** 89 2020-10-15 02:11 32 ************* 90 2020-10-15 02:12 32 ************* 91 2020-10-15 02:13 33 ************** 92 2020-10-15 02:14 ? - 93 2020-10-15 02:15 32 ************* 94 2020-10-15 02:16 ? - 95 2020-10-15 02:17 32 ************* 96 2020-10-15 02:18 33 ************** 97 2020-10-15 02:19 ? - 98 2020-10-15 02:20 33 ************** 99 2020-10-15 02:21 33 ************** 100 2020-10-15 02:22 32 ************* ... ..( 2 skipped). .. ************* 103 2020-10-15 02:25 32 ************* 104 2020-10-15 02:26 31 ************ 105 2020-10-15 02:27 ? - 106 2020-10-15 02:28 31 ************ 107 2020-10-15 02:29 31 ************ 108 2020-10-15 02:30 ? - 109 2020-10-15 02:31 31 ************ 110 2020-10-15 02:32 31 ************ 111 2020-10-15 02:33 32 ************* 112 2020-10-15 02:34 ? - 113 2020-10-15 02:35 32 ************* 114 2020-10-15 02:36 32 ************* 115 2020-10-15 02:37 ? - 116 2020-10-15 02:38 32 ************* 117 2020-10-15 02:39 ? - 118 2020-10-15 02:40 32 ************* 119 2020-10-15 02:41 32 ************* 120 2020-10-15 02:42 ? - 121 2020-10-15 02:43 32 ************* ... ..( 4 skipped). .. ************* 126 2020-10-15 02:48 32 ************* 127 2020-10-15 02:49 ? - 0 2020-10-15 02:50 32 ************* 1 2020-10-15 02:51 31 ************ 2 2020-10-15 02:52 33 ************** 3 2020-10-15 02:53 32 ************* ... ..( 2 skipped). .. ************* 6 2020-10-15 02:56 32 ************* 7 2020-10-15 02:57 ? - 8 2020-10-15 02:58 32 ************* 9 2020-10-15 02:59 32 ************* 10 2020-10-15 03:00 31 ************ ... ..( 4 skipped). .. ************ 15 2020-10-15 03:05 31 ************ 16 2020-10-15 03:06 ? - 17 2020-10-15 03:07 31 ************ 18 2020-10-15 03:08 ? - 19 2020-10-15 03:09 29 ********** 20 2020-10-15 03:10 31 ************ 21 2020-10-15 03:11 30 *********** ... ..( 8 skipped). .. *********** 30 2020-10-15 03:20 30 *********** 31 2020-10-15 03:21 ? - 32 2020-10-15 03:22 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 706 Vendor specific /dev/sdd smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-51-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Desktop SSHD Device Model: ST4000DX001-1CE168 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC44 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 15 03:22:23 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 107) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 512) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1081) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 118 099 006 - 181521128 3 Spin_Up_Time PO---- 092 091 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 170 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-- 059 049 030 - 98804771046 9 Power_On_Hours -O--CK 044 044 000 - 49405 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 207 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 3 3 5 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 067 062 045 - 33 (Min/Max 32/33) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 107 193 Load_Cycle_Count -O--CK 100 100 000 - 1399 194 Temperature_Celsius -O---K 033 040 000 - 33 (0 21 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 22317h+07m+32.891s 241 Total_LBAs_Written ------ 100 253 000 - 124831401603 242 Total_LBAs_Read ------ 100 253 000 - 83725869276 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 1223 Current Device Internal Status Data log 0x25 GPL R/O 1223 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 3900 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 4580 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xc2 GPL,SL VS 50 Device vendor specific log 0xc4 GPL,SL VS 5 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 25/32 Celsius Lifetime Min/Max Temperature: 21/49 Celsius Under/Over Temperature Limit Count: 0/0 SCT Data Table command not supported SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS