Probe #a0779807a2 of Gigabyte B85M-D2V-SI Desktop Computer

Log: smartctl

/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.14-desktop-1omv4002] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: OCZ/Toshiba Trion SSDs Device Model: TOSHIBA Q300 Serial Number: -- LU WWN Device Id: 5 00080d ... Firmware Version: SAFM11.2 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Feb 15 04:13:34 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 30) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 9 Power_On_Hours -O--C- 100 100 000 - 8666 12 Power_Cycle_Count -O--C- 100 100 000 - 5077 167 SSD_Protect_Mode -O---K 100 100 000 - 0 168 SATA_PHY_Error_Count -O--C- 100 100 000 - 54 169 Bad_Block_Count PO---- 100 100 010 - 0 173 Erase_Count -O--C- 195 195 000 - 0 192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 160 194 Temperature_Celsius PO---K 070 041 030 - 30 (Min/Max 11/59) ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 5077 --- Lifetime Power-On Resets 0x01 0x010 4 8666 --- Power-on Hours 0x01 0x018 6 20158664513 --- Logical Sectors Written 0x01 0x020 6 336888899 --- Number of Write Commands 0x01 0x028 6 30290855664 --- Logical Sectors Read 0x01 0x030 6 458198705 --- Number of Read Commands 0x01 0x038 6 1613081615233 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 21325 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 15 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x010 1 32 --- Average Short Term Temperature 0x05 0x018 1 32 --- Average Long Term Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 5 --- Lowest Temperature 0x05 0x030 1 50 --- Highest Average Short Term Temperature 0x05 0x038 1 16 --- Lowest Average Short Term Temperature 0x05 0x040 1 50 --- Highest Average Long Term Temperature 0x05 0x048 1 16 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 50 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 665667 --- Number of Hardware Resets 0x06 0x018 4 5 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 5 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 1 Command failed due to ICRC error 0x0003 2 5 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 48 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 86284184 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 18972 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 48 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.14-desktop-1omv4002] (OpenMandriva Lx 7.2-2) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST31000524AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: JC45 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Feb 15 04:13:34 2021 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 208 (intermediate), recommended: 208 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 609) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 179) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 75113019 3 Spin_Up_Time PO---- 100 100 000 - 0 4 Start_Stop_Count -O--CK 088 088 020 - 12299 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 088 060 030 - 789541250 9 Power_On_Hours -O--CK 082 082 000 - 16024 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 091 091 020 - 10188 183 Runtime_Bad_Block -O--CK 097 097 000 - 3 184 End-to-End_Error -O--CK 001 001 099 NOW 459 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 028 000 - 146031117379 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 066 043 045 Past 34 (0 22 34 19 0) 194 Temperature_Celsius -O---K 034 057 000 - 34 (0 13 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 032 024 000 - 75113019 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 172 000 - 19422 240 Head_Flying_Hours ------ 100 253 000 - 44828 (18 117 0) 241 Total_LBAs_Written ------ 100 253 000 - 1627430471 242 Total_LBAs_Read ------ 100 253 000 - 3800756788 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 7269 hours (302 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 62 a0 de 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:06:11.282 FLUSH CACHE EXT 60 00 00 00 40 00 00 01 95 9d 47 40 00 00:06:11.275 READ FPDMA QUEUED 61 00 00 01 00 00 00 40 37 69 71 40 00 00:06:11.275 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 62 85 af 40 00 00:06:11.274 WRITE FPDMA QUEUED 61 00 00 00 08 00 00 00 03 74 f7 40 00 00:06:11.274 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 19/34 Celsius Lifetime Min/Max Temperature: 13/56 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (19) Index Estimated Time Temperature Celsius 20 2021-02-09 23:15 ? - 21 2021-02-10 00:14 33 ************** 22 2021-02-10 01:13 ? - 23 2021-02-10 02:12 33 ************** 24 2021-02-10 03:11 ? - 25 2021-02-10 04:10 33 ************** 26 2021-02-10 05:09 ? - 27 2021-02-10 06:08 18 - 28 2021-02-10 07:07 18 - 29 2021-02-10 08:06 31 ************ 30 2021-02-10 09:05 34 *************** 31 2021-02-10 10:04 33 ************** 32 2021-02-10 11:03 33 ************** 33 2021-02-10 12:02 ? - 34 2021-02-10 13:01 18 - 35 2021-02-10 14:00 18 - 36 2021-02-10 14:59 32 ************* 37 2021-02-10 15:58 34 *************** 38 2021-02-10 16:57 ? - 39 2021-02-10 17:56 22 *** 40 2021-02-10 18:55 22 *** 41 2021-02-10 19:54 ? - 42 2021-02-10 20:53 22 *** 43 2021-02-10 21:52 ? - 44 2021-02-10 22:51 20 * 45 2021-02-10 23:50 20 * 46 2021-02-11 00:49 ? - 47 2021-02-11 01:48 20 * 48 2021-02-11 02:47 20 * 49 2021-02-11 03:46 35 **************** 50 2021-02-11 04:45 35 **************** 51 2021-02-11 05:44 ? - 52 2021-02-11 06:43 18 - 53 2021-02-11 07:42 18 - 54 2021-02-11 08:41 31 ************ 55 2021-02-11 09:40 31 ************ 56 2021-02-11 10:39 32 ************* 57 2021-02-11 11:38 33 ************** 58 2021-02-11 12:37 ? - 59 2021-02-11 13:36 22 *** 60 2021-02-11 14:35 ? - 61 2021-02-11 15:34 20 * 62 2021-02-11 16:33 20 * 63 2021-02-11 17:32 32 ************* 64 2021-02-11 18:31 32 ************* 65 2021-02-11 19:30 ? - 66 2021-02-11 20:29 20 * 67 2021-02-11 21:28 ? - 68 2021-02-11 22:27 22 *** 69 2021-02-11 23:26 22 *** 70 2021-02-12 00:25 32 ************* 71 2021-02-12 01:24 34 *************** 72 2021-02-12 02:23 34 *************** 73 2021-02-12 03:22 34 *************** 74 2021-02-12 04:21 35 **************** 75 2021-02-12 05:20 ? - 76 2021-02-12 06:19 19 - 77 2021-02-12 07:18 19 - 78 2021-02-12 08:17 32 ************* 79 2021-02-12 09:16 33 ************** 80 2021-02-12 10:15 ? - 81 2021-02-12 11:14 22 *** 82 2021-02-12 12:13 22 *** 83 2021-02-12 13:12 34 *************** 84 2021-02-12 14:11 32 ************* 85 2021-02-12 15:10 32 ************* 86 2021-02-12 16:09 33 ************** 87 2021-02-12 17:08 32 ************* 88 2021-02-12 18:07 33 ************** 89 2021-02-12 19:06 34 *************** 90 2021-02-12 20:05 ? - 91 2021-02-12 21:04 19 - 92 2021-02-12 22:03 19 - 93 2021-02-12 23:02 32 ************* 94 2021-02-13 00:01 34 *************** 95 2021-02-13 01:00 ? - 96 2021-02-13 01:59 21 ** 97 2021-02-13 02:58 21 ** 98 2021-02-13 03:57 37 ****************** 99 2021-02-13 04:56 ? - 100 2021-02-13 05:55 20 * 101 2021-02-13 06:54 ? - 102 2021-02-13 07:53 20 * 103 2021-02-13 08:52 20 * 104 2021-02-13 09:51 35 **************** 105 2021-02-13 10:50 36 ***************** 106 2021-02-13 11:49 37 ****************** 107 2021-02-13 12:48 ? - 108 2021-02-13 13:47 23 **** 109 2021-02-13 14:46 23 **** 110 2021-02-13 15:45 36 ***************** 111 2021-02-13 16:44 37 ****************** 112 2021-02-13 17:43 36 ***************** 113 2021-02-13 18:42 37 ****************** 114 2021-02-13 19:41 34 *************** 115 2021-02-13 20:40 ? - 116 2021-02-13 21:39 34 *************** 117 2021-02-13 22:38 34 *************** 118 2021-02-13 23:37 ? - 119 2021-02-14 00:36 20 * 120 2021-02-14 01:35 20 * 121 2021-02-14 02:34 ? - 122 2021-02-14 03:33 20 * 123 2021-02-14 04:32 ? - 124 2021-02-14 05:31 22 *** 125 2021-02-14 06:30 22 *** 126 2021-02-14 07:29 33 ************** 127 2021-02-14 08:28 34 *************** 0 2021-02-14 09:27 36 ***************** 1 2021-02-14 10:26 34 *************** 2 2021-02-14 11:25 35 **************** 3 2021-02-14 12:24 ? - 4 2021-02-14 13:23 20 * 5 2021-02-14 14:22 ? - 6 2021-02-14 15:21 33 ************** 7 2021-02-14 16:20 33 ************** 8 2021-02-14 17:19 ? - 9 2021-02-14 18:18 23 **** 10 2021-02-14 19:17 ? - 11 2021-02-14 20:16 23 **** 12 2021-02-14 21:15 ? - 13 2021-02-14 22:14 19 - 14 2021-02-14 23:13 ? - 15 2021-02-15 00:12 19 - 16 2021-02-15 01:11 19 - 17 2021-02-15 02:10 32 ************* 18 2021-02-15 03:09 33 ************** 19 2021-02-15 04:08 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS


Hardware for Linux and BSD

GitHub