/dev/sda smartctl 7.1 2019-12-30 r5022 [i686-linux-5.4.32-generic-2rosa-i586] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Hitachi HDS721050CLA360 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP2OA50E User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Jun 29 14:58:47 2021 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled Read SMART Data failed: scsi error badly formed scsi parameters === START OF READ SMART DATA SECTION === SMART Status command failed: scsi error badly formed scsi parameters SMART overall-health self-assessment test result: UNKNOWN! SMART Status, Attributes and Thresholds cannot be read. General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 9343 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9343 [2] occurred at disk power-on lifetime: 23229 hours (967 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 18 c9 d2 99 08 00 Error: UNC 1 sectors at LBA = 0x18c9d299 = 415879833 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 18 c9 d2 99 e0 08 41d+21:02:54.854 READ DMA EXT 25 00 00 00 05 00 00 18 c9 d2 9b e8 08 41d+21:02:54.819 READ DMA EXT 25 00 00 00 01 00 00 18 c9 d2 9a e0 08 41d+21:02:54.648 READ DMA EXT c8 00 00 00 20 38 60 2f 00 00 00 e0 08 41d+21:02:54.547 READ DMA 27 00 00 00 00 00 00 00 00 00 00 e0 08 41d+21:02:54.545 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 9342 [1] occurred at disk power-on lifetime: 23229 hours (967 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 18 c9 d2 99 08 00 Error: UNC 1 sectors at LBA = 0x18c9d299 = 415879833 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 01 00 00 18 c9 d2 99 e0 08 41d+21:02:27.122 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 41d+21:02:27.120 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 00 00 00 00 00 00 00 00 a0 08 41d+21:02:27.105 IDENTIFY DEVICE ef 00 03 00 46 38 60 2f 00 00 00 a0 08 41d+21:02:27.092 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 00 00 00 00 e0 08 41d+21:02:27.090 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 9341 [0] occurred at disk power-on lifetime: 23229 hours (967 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 07 00 00 18 c9 d2 99 08 00 Error: UNC 7 sectors at LBA = 0x18c9d299 = 415879833 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 18 c9 d2 98 e0 08 41d+21:01:59.319 READ DMA EXT 25 00 00 00 08 00 00 18 c9 d2 90 e0 08 41d+21:01:55.354 READ DMA EXT 25 00 00 00 40 00 00 18 c9 d3 10 e0 08 41d+21:01:55.282 READ DMA EXT 27 00 00 00 00 00 00 00 00 00 00 e0 08 41d+21:01:55.280 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 03 00 00 00 00 00 00 00 00 00 a0 08 41d+21:01:55.265 IDENTIFY DEVICE Error 9340 [3] occurred at disk power-on lifetime: 23229 hours (967 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 77 00 00 18 c9 d2 99 08 00 Error: UNC 119 sectors at LBA = 0x18c9d299 = 415879833 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 80 00 00 18 c9 d2 90 e0 08 41d+21:01:13.085 READ DMA EXT 25 00 00 00 40 00 00 18 c9 d2 50 e8 08 41d+21:01:13.083 READ DMA EXT 25 00 00 00 40 00 00 18 c9 d2 10 e8 08 41d+21:01:13.082 READ DMA EXT 25 00 00 00 80 00 00 18 c9 d1 90 e8 08 41d+21:01:13.078 READ DMA EXT 25 00 00 00 40 00 00 18 c9 d1 50 e8 08 41d+21:01:13.076 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 36/37 Celsius Lifetime Min/Max Temperature: 4/51 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (95) Index Estimated Time Temperature Celsius 96 2021-06-29 12:51 37 ****************** 97 2021-06-29 12:52 36 ***************** ... ..( 3 skipped). .. ***************** 101 2021-06-29 12:56 36 ***************** 102 2021-06-29 12:57 37 ****************** 103 2021-06-29 12:58 36 ***************** 104 2021-06-29 12:59 36 ***************** 105 2021-06-29 13:00 36 ***************** 106 2021-06-29 13:01 37 ****************** ... ..( 5 skipped). .. ****************** 112 2021-06-29 13:07 37 ****************** 113 2021-06-29 13:08 36 ***************** 114 2021-06-29 13:09 37 ****************** 115 2021-06-29 13:10 36 ***************** ... ..( 13 skipped). .. ***************** 1 2021-06-29 13:24 36 ***************** 2 2021-06-29 13:25 37 ****************** ... ..( 19 skipped). .. ****************** 22 2021-06-29 13:45 37 ****************** 23 2021-06-29 13:46 36 ***************** 24 2021-06-29 13:47 37 ****************** ... ..( 26 skipped). .. ****************** 51 2021-06-29 14:14 37 ****************** 52 2021-06-29 14:15 36 ***************** 53 2021-06-29 14:16 37 ****************** ... ..( 31 skipped). .. ****************** 85 2021-06-29 14:48 37 ****************** 86 2021-06-29 14:49 ? - 87 2021-06-29 14:50 37 ****************** 88 2021-06-29 14:51 37 ****************** 89 2021-06-29 14:52 37 ****************** 90 2021-06-29 14:53 36 ***************** 91 2021-06-29 14:54 36 ***************** 92 2021-06-29 14:55 37 ****************** ... ..( 2 skipped). .. ****************** 95 2021-06-29 14:58 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description ATA_READ_LOG_EXT (addr=0x04:0x00, page=1, n=1) failed: scsi error badly formed scsi parameters Read Device Statistics page 0x01 failed Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS