Probe #97174d322e of Acer EQ45M Desktop Computer (Veriton M670G/M670)

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P80 SD Device Model: SAMSUNG HD080HJ Serial Number: -- Firmware Version: ZH100-47 User Capacity: 80.026.361.856 bytes [80,0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a Local Time is: Fri May 5 16:09:58 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1848) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 1 3 Spin_Up_Time POS--- 253 253 025 - 3904 4 Start_Stop_Count -O--CK 100 100 000 - 455 5 Reallocated_Sector_Ct PO--CK 253 253 010 - 0 7 Seek_Error_Rate POSR-- 253 253 051 - 0 8 Seek_Time_Performance P-S--K 253 253 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 3440 10 Spin_Retry_Count PO--CK 253 253 051 - 0 11 Calibration_Retry_Count -O--C- 253 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 263 187 Reported_Uncorrect -O--CK 253 253 000 - 0 190 Airflow_Temperature_Cel -O---K 085 055 000 - 51 194 Temperature_Celsius -O---K 085 055 000 - 51 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 9987872 196 Reallocated_Event_Count -O--CK 253 253 000 - 0 197 Current_Pending_Sector -O--C- 253 253 000 - 0 198 Offline_Uncorrectable ----CK 253 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 100 100 000 - 0 202 Data_Address_Mark_Errs -O--CK 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 51 Celsius Power Cycle Max Temperature: 53 Celsius Lifetime Max Temperature: 65 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 10/55 Celsius Min/Max Temperature Limit: 5/60 Celsius Temperature History Size (Index): 128 (41) Index Estimated Time Temperature Celsius 42 2017-05-05 14:02 52 ********************************* ... ..( 5 skipped). .. ********************************* 48 2017-05-05 14:08 52 ********************************* 49 2017-05-05 14:09 51 ******************************** ... ..( 39 skipped). .. ******************************** 89 2017-05-05 14:49 51 ******************************** 90 2017-05-05 14:50 52 ********************************* ... ..( 3 skipped). .. ********************************* 94 2017-05-05 14:54 52 ********************************* 95 2017-05-05 14:55 51 ******************************** 96 2017-05-05 14:56 51 ******************************** 97 2017-05-05 14:57 52 ********************************* 98 2017-05-05 14:58 52 ********************************* 99 2017-05-05 14:59 51 ******************************** ... ..( 69 skipped). .. ******************************** 41 2017-05-05 16:09 51 ******************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 20 Device-to-host register FISes sent due to a COMRESET 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x8001 2 0 Vendor specific /dev/sdb === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green Device Model: WDC WD10EAVS-00D7B1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1.000.204.886.016 bytes [1,00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Fri May 5 16:09:58 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (23400) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 268) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 165 162 021 - 6741 4 Start_Stop_Count -O--CK 094 094 000 - 6977 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 089 089 000 - 8055 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5289 192 Power-Off_Retract_Count -O--CK 197 197 000 - 2698 193 Load_Cycle_Count -O--CK 198 198 000 - 6977 194 Temperature_Celsius -O---K 107 099 000 - 43 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 43 Celsius Power Cycle Min/Max Temperature: 29/43 Celsius Lifetime Min/Max Temperature: 42/51 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (345) Index Estimated Time Temperature Celsius 346 2017-05-05 08:12 41 ********************** ... ..( 16 skipped). .. ********************** 363 2017-05-05 08:29 41 ********************** 364 2017-05-05 08:30 42 *********************** 365 2017-05-05 08:31 41 ********************** 366 2017-05-05 08:32 42 *********************** 367 2017-05-05 08:33 42 *********************** 368 2017-05-05 08:34 42 *********************** 369 2017-05-05 08:35 41 ********************** ... ..( 25 skipped). .. ********************** 395 2017-05-05 09:01 41 ********************** 396 2017-05-05 09:02 42 *********************** ... ..( 2 skipped). .. *********************** 399 2017-05-05 09:05 42 *********************** 400 2017-05-05 09:06 41 ********************** ... ..( 7 skipped). .. ********************** 408 2017-05-05 09:14 41 ********************** 409 2017-05-05 09:15 42 *********************** ... ..( 13 skipped). .. *********************** 423 2017-05-05 09:29 42 *********************** 424 2017-05-05 09:30 41 ********************** ... ..( 4 skipped). .. ********************** 429 2017-05-05 09:35 41 ********************** 430 2017-05-05 09:36 42 *********************** ... ..( 6 skipped). .. *********************** 437 2017-05-05 09:43 42 *********************** 438 2017-05-05 09:44 41 ********************** ... ..( 38 skipped). .. ********************** 477 2017-05-05 10:23 41 ********************** 0 2017-05-05 10:24 40 ********************* 1 2017-05-05 10:25 41 ********************** 2 2017-05-05 10:26 40 ********************* ... ..( 8 skipped). .. ********************* 11 2017-05-05 10:35 40 ********************* 12 2017-05-05 10:36 41 ********************** 13 2017-05-05 10:37 40 ********************* 14 2017-05-05 10:38 41 ********************** ... ..( 39 skipped). .. ********************** 54 2017-05-05 11:18 41 ********************** 55 2017-05-05 11:19 42 *********************** ... ..( 6 skipped). .. *********************** 62 2017-05-05 11:26 42 *********************** 63 2017-05-05 11:27 43 ************************ ... ..( 11 skipped). .. ************************ 75 2017-05-05 11:39 43 ************************ 76 2017-05-05 11:40 42 *********************** ... ..( 27 skipped). .. *********************** 104 2017-05-05 12:08 42 *********************** 105 2017-05-05 12:09 43 ************************ ... ..( 2 skipped). .. ************************ 108 2017-05-05 12:12 43 ************************ 109 2017-05-05 12:13 42 *********************** 110 2017-05-05 12:14 43 ************************ ... ..( 5 skipped). .. ************************ 116 2017-05-05 12:20 43 ************************ 117 2017-05-05 12:21 42 *********************** 118 2017-05-05 12:22 42 *********************** 119 2017-05-05 12:23 43 ************************ ... ..( 78 skipped). .. ************************ 198 2017-05-05 13:42 43 ************************ 199 2017-05-05 13:43 42 *********************** ... ..( 17 skipped). .. *********************** 217 2017-05-05 14:01 42 *********************** 218 2017-05-05 14:02 43 ************************ 219 2017-05-05 14:03 40 ********************* ... ..( 89 skipped). .. ********************* 309 2017-05-05 15:33 40 ********************* 310 2017-05-05 15:34 41 ********************** ... ..( 2 skipped). .. ********************** 313 2017-05-05 15:37 41 ********************** 314 2017-05-05 15:38 40 ********************* 315 2017-05-05 15:39 40 ********************* 316 2017-05-05 15:40 41 ********************** 317 2017-05-05 15:41 40 ********************* 318 2017-05-05 15:42 41 ********************** 319 2017-05-05 15:43 40 ********************* 320 2017-05-05 15:44 40 ********************* 321 2017-05-05 15:45 41 ********************** ... ..( 4 skipped). .. ********************** 326 2017-05-05 15:50 41 ********************** 327 2017-05-05 15:51 42 *********************** ... ..( 15 skipped). .. *********************** 343 2017-05-05 16:07 42 *********************** 344 2017-05-05 16:08 41 ********************** 345 2017-05-05 16:09 41 ********************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 18 Device-to-host register FISes sent due to a COMRESET 0x8000 4 70142 Vendor specific


Hardware for Linux and BSD

GitHub