Probe #920263168c of ASUSTek 970 PRO GAMING Desktop Computer

Log: smartctl

/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.6.0-1-default] (SUSE RPM) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-22MFCA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Apr 8 20:53:19 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11220) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 116) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 176 170 021 - 2200 4 Start_Stop_Count -O--CK 100 100 000 - 731 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 081 081 000 - 14061 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 731 192 Power-Off_Retract_Count -O--CK 200 200 000 - 54 193 Load_Cycle_Count -O--CK 200 200 000 - 719 194 Temperature_Celsius -O---K 107 097 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 14060 - # 2 Short offline Completed without error 00% 14056 - # 3 Short offline Completed without error 00% 14052 - # 4 Short offline Completed without error 00% 14039 - # 5 Short offline Completed without error 00% 14029 - # 6 Short offline Completed without error 00% 14023 - # 7 Short offline Completed without error 00% 14016 - # 8 Short offline Completed without error 00% 14005 - # 9 Short offline Completed without error 00% 14000 - #10 Short offline Completed without error 00% 13993 - #11 Short offline Completed without error 00% 13980 - #12 Short offline Completed without error 00% 13972 - #13 Short offline Completed without error 00% 13969 - #14 Short offline Completed without error 00% 13963 - #15 Short offline Completed without error 00% 13956 - #16 Short offline Completed without error 00% 13949 - #17 Short offline Completed without error 00% 13943 - #18 Short offline Completed without error 00% 13933 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 22/36 Celsius Lifetime Min/Max Temperature: 15/46 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (98) Index Estimated Time Temperature Celsius 99 2020-04-08 12:56 36 ***************** ... ..( 33 skipped). .. ***************** 133 2020-04-08 13:30 36 ***************** 134 2020-04-08 13:31 ? - 135 2020-04-08 13:32 22 *** 136 2020-04-08 13:33 22 *** 137 2020-04-08 13:34 22 *** 138 2020-04-08 13:35 23 **** 139 2020-04-08 13:36 23 **** 140 2020-04-08 13:37 24 ***** 141 2020-04-08 13:38 25 ****** 142 2020-04-08 13:39 25 ****** 143 2020-04-08 13:40 26 ******* 144 2020-04-08 13:41 26 ******* 145 2020-04-08 13:42 26 ******* 146 2020-04-08 13:43 27 ******** 147 2020-04-08 13:44 27 ******** 148 2020-04-08 13:45 28 ********* 149 2020-04-08 13:46 28 ********* 150 2020-04-08 13:47 28 ********* 151 2020-04-08 13:48 29 ********** 152 2020-04-08 13:49 29 ********** 153 2020-04-08 13:50 29 ********** 154 2020-04-08 13:51 30 *********** ... ..( 2 skipped). .. *********** 157 2020-04-08 13:54 30 *********** 158 2020-04-08 13:55 31 ************ 159 2020-04-08 13:56 31 ************ 160 2020-04-08 13:57 31 ************ 161 2020-04-08 13:58 32 ************* ... ..( 2 skipped). .. ************* 164 2020-04-08 14:01 32 ************* 165 2020-04-08 14:02 33 ************** ... ..( 3 skipped). .. ************** 169 2020-04-08 14:06 33 ************** 170 2020-04-08 14:07 34 *************** ... ..( 2 skipped). .. *************** 173 2020-04-08 14:10 34 *************** 174 2020-04-08 14:11 35 **************** ... ..( 5 skipped). .. **************** 180 2020-04-08 14:17 35 **************** 181 2020-04-08 14:18 36 ***************** ... ..( 38 skipped). .. ***************** 220 2020-04-08 14:57 36 ***************** 221 2020-04-08 14:58 35 **************** ... ..( 85 skipped). .. **************** 307 2020-04-08 16:24 35 **************** 308 2020-04-08 16:25 36 ***************** ... ..( 67 skipped). .. ***************** 376 2020-04-08 17:33 36 ***************** 377 2020-04-08 17:34 ? - 378 2020-04-08 17:35 22 *** ... ..( 2 skipped). .. *** 381 2020-04-08 17:38 22 *** 382 2020-04-08 17:39 23 **** 383 2020-04-08 17:40 24 ***** 384 2020-04-08 17:41 24 ***** 385 2020-04-08 17:42 25 ****** 386 2020-04-08 17:43 25 ****** 387 2020-04-08 17:44 26 ******* 388 2020-04-08 17:45 26 ******* 389 2020-04-08 17:46 27 ******** 390 2020-04-08 17:47 27 ******** 391 2020-04-08 17:48 27 ******** 392 2020-04-08 17:49 28 ********* 393 2020-04-08 17:50 28 ********* 394 2020-04-08 17:51 29 ********** ... ..( 2 skipped). .. ********** 397 2020-04-08 17:54 29 ********** 398 2020-04-08 17:55 30 *********** ... ..( 3 skipped). .. *********** 402 2020-04-08 17:59 30 *********** 403 2020-04-08 18:00 31 ************ ... ..( 2 skipped). .. ************ 406 2020-04-08 18:03 31 ************ 407 2020-04-08 18:04 32 ************* ... ..( 3 skipped). .. ************* 411 2020-04-08 18:08 32 ************* 412 2020-04-08 18:09 33 ************** ... ..( 8 skipped). .. ************** 421 2020-04-08 18:18 33 ************** 422 2020-04-08 18:19 34 *************** ... ..( 17 skipped). .. *************** 440 2020-04-08 18:37 34 *************** 441 2020-04-08 18:38 35 **************** ... ..( 41 skipped). .. **************** 5 2020-04-08 19:20 35 **************** 6 2020-04-08 19:21 36 ***************** ... ..( 91 skipped). .. ***************** 98 2020-04-08 20:53 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 5206 Vendor specific /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.6.0-1-default] (SUSE RPM) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-08WN4A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Apr 8 20:53:19 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10740) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 112) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 176 169 021 - 2191 4 Start_Stop_Count -O--CK 100 100 000 - 749 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 083 083 000 - 12930 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 749 192 Power-Off_Retract_Count -O--CK 200 200 000 - 48 193 Load_Cycle_Count -O--CK 199 199 000 - 4262 194 Temperature_Celsius -O---K 107 096 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 48 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 12929 - # 2 Short offline Completed without error 00% 12925 - # 3 Short offline Completed without error 00% 12921 - # 4 Short offline Completed without error 00% 12908 - # 5 Short offline Completed without error 00% 12897 - # 6 Short offline Completed without error 00% 12891 - # 7 Short offline Completed without error 00% 12885 - # 8 Short offline Completed without error 00% 12874 - # 9 Short offline Completed without error 00% 12869 - #10 Short offline Completed without error 00% 12862 - #11 Short offline Completed without error 00% 12849 - #12 Short offline Completed without error 00% 12841 - #13 Short offline Completed without error 00% 12837 - #14 Short offline Completed without error 00% 12832 - #15 Short offline Completed without error 00% 12825 - #16 Short offline Completed without error 00% 12818 - #17 Short offline Completed without error 00% 12811 - #18 Short offline Completed without error 00% 12802 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 22/37 Celsius Lifetime Min/Max Temperature: 15/48 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (152) Index Estimated Time Temperature Celsius 153 2020-04-08 12:56 29 ********** 154 2020-04-08 12:57 29 ********** 155 2020-04-08 12:58 30 *********** ... ..( 2 skipped). .. *********** 158 2020-04-08 13:01 30 *********** 159 2020-04-08 13:02 31 ************ ... ..( 4 skipped). .. ************ 164 2020-04-08 13:07 31 ************ 165 2020-04-08 13:08 32 ************* ... ..( 6 skipped). .. ************* 172 2020-04-08 13:15 32 ************* 173 2020-04-08 13:16 33 ************** ... ..( 4 skipped). .. ************** 178 2020-04-08 13:21 33 ************** 179 2020-04-08 13:22 34 *************** 180 2020-04-08 13:23 35 **************** ... ..( 13 skipped). .. **************** 194 2020-04-08 13:37 35 **************** 195 2020-04-08 13:38 36 ***************** ... ..( 22 skipped). .. ***************** 218 2020-04-08 14:01 36 ***************** 219 2020-04-08 14:02 37 ****************** ... ..( 3 skipped). .. ****************** 223 2020-04-08 14:06 37 ****************** 224 2020-04-08 14:07 36 ***************** 225 2020-04-08 14:08 35 **************** ... ..( 34 skipped). .. **************** 260 2020-04-08 14:43 35 **************** 261 2020-04-08 14:44 36 ***************** ... ..( 11 skipped). .. ***************** 273 2020-04-08 14:56 36 ***************** 274 2020-04-08 14:57 37 ****************** ... ..( 2 skipped). .. ****************** 277 2020-04-08 15:00 37 ****************** 278 2020-04-08 15:01 36 ***************** ... ..( 18 skipped). .. ***************** 297 2020-04-08 15:20 36 ***************** 298 2020-04-08 15:21 35 **************** 299 2020-04-08 15:22 36 ***************** 300 2020-04-08 15:23 35 **************** ... ..( 11 skipped). .. **************** 312 2020-04-08 15:35 35 **************** 313 2020-04-08 15:36 36 ***************** ... ..( 21 skipped). .. ***************** 335 2020-04-08 15:58 36 ***************** 336 2020-04-08 15:59 35 **************** 337 2020-04-08 16:00 36 ***************** 338 2020-04-08 16:01 35 **************** ... ..( 41 skipped). .. **************** 380 2020-04-08 16:43 35 **************** 381 2020-04-08 16:44 ? - 382 2020-04-08 16:45 22 *** 383 2020-04-08 16:46 22 *** 384 2020-04-08 16:47 22 *** 385 2020-04-08 16:48 23 **** 386 2020-04-08 16:49 24 ***** 387 2020-04-08 16:50 24 ***** 388 2020-04-08 16:51 25 ****** 389 2020-04-08 16:52 25 ****** 390 2020-04-08 16:53 26 ******* 391 2020-04-08 16:54 26 ******* 392 2020-04-08 16:55 26 ******* 393 2020-04-08 16:56 27 ******** 394 2020-04-08 16:57 29 ********** ... ..( 2 skipped). .. ********** 397 2020-04-08 17:00 29 ********** 398 2020-04-08 17:01 30 *********** ... ..( 3 skipped). .. *********** 402 2020-04-08 17:05 30 *********** 403 2020-04-08 17:06 31 ************ ... ..( 4 skipped). .. ************ 408 2020-04-08 17:11 31 ************ 409 2020-04-08 17:12 32 ************* ... ..( 7 skipped). .. ************* 417 2020-04-08 17:20 32 ************* 418 2020-04-08 17:21 33 ************** ... ..( 3 skipped). .. ************** 422 2020-04-08 17:25 33 ************** 423 2020-04-08 17:26 35 **************** ... ..( 16 skipped). .. **************** 440 2020-04-08 17:43 35 **************** 441 2020-04-08 17:44 34 *************** ... ..( 6 skipped). .. *************** 448 2020-04-08 17:51 34 *************** 449 2020-04-08 17:52 35 **************** ... ..( 2 skipped). .. **************** 452 2020-04-08 17:55 35 **************** 453 2020-04-08 17:56 36 ***************** ... ..( 12 skipped). .. ***************** 466 2020-04-08 18:09 36 ***************** 467 2020-04-08 18:10 35 **************** ... ..( 18 skipped). .. **************** 8 2020-04-08 18:29 35 **************** 9 2020-04-08 18:30 36 ***************** ... ..( 55 skipped). .. ***************** 65 2020-04-08 19:26 36 ***************** 66 2020-04-08 19:27 37 ****************** ... ..( 9 skipped). .. ****************** 76 2020-04-08 19:37 37 ****************** 77 2020-04-08 19:38 36 ***************** ... ..( 46 skipped). .. ***************** 124 2020-04-08 20:25 36 ***************** 125 2020-04-08 20:26 37 ****************** ... ..( 11 skipped). .. ****************** 137 2020-04-08 20:38 37 ****************** 138 2020-04-08 20:39 ? - 139 2020-04-08 20:40 22 *** 140 2020-04-08 20:41 22 *** 141 2020-04-08 20:42 23 **** 142 2020-04-08 20:43 23 **** 143 2020-04-08 20:44 24 ***** 144 2020-04-08 20:45 25 ****** 145 2020-04-08 20:46 25 ****** 146 2020-04-08 20:47 27 ******** 147 2020-04-08 20:48 27 ******** 148 2020-04-08 20:49 27 ******** 149 2020-04-08 20:50 28 ********* 150 2020-04-08 20:51 28 ********* 151 2020-04-08 20:52 28 ********* 152 2020-04-08 20:53 29 ********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 5207 Vendor specific


Hardware for Linux and BSD

GitHub