Probe #903dfc6f62 of Gigabyte B250M-D3H-CF Desktop Computer (B250M-D3H)

Log: smartctl

/dev/nvme0n1 smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-91-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Force MP510 Serial Number: -- Firmware Version: ECFM22.7 PCI Vendor/Subsystem ID: 0x1987 IEEE OUI Identifier: 0x6479a7 Total NVM Capacity: 240,057,409,536 [240 GB] Unallocated NVM Capacity: 0 Controller ID: 1 Number of Namespaces: 1 Namespace 1 Size/Capacity: 240,057,409,536 [240 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 6479a7 ... Local Time is: Mon Dec 13 12:56:21 2021 -03 Firmware Updates (0x12): 1 Slot, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.77W - - 0 0 0 0 0 0 1 + 5.71W - - 1 1 1 1 0 0 2 + 5.19W - - 2 2 2 2 0 0 3 - 0.0490W - - 3 3 3 3 2000 2000 4 - 0.0018W - - 4 4 4 4 25000 25000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 34 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 0% Data Units Read: 76,142 [38.9 GB] Data Units Written: 322,600 [165 GB] Host Read Commands: 1,292,990 Host Write Commands: 4,982,420 Controller Busy Time: 21 Power Cycles: 9 Power On Hours: 375 Unsafe Shutdowns: 2 Media and Data Integrity Errors: 0 Error Information Log Entries: 33 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, max 63 entries) No Errors Logged /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-91-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST3500418AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: AP73 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Dec 13 12:56:21 2021 -03 ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213891en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 83) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -OSR-- 119 099 006 - 234297835 3 Spin_Up_Time PO---- 100 100 000 - 0 4 Start_Stop_Count -O--CK 096 096 020 - 4546 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 089 060 030 - 816102409 9 Power_On_Hours -O--CK 049 049 000 - 44796 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 096 096 020 - 4400 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 099 000 - 10 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 063 037 045 Past 37 (22 13 37 23 0) 194 Temperature_Celsius -O---K 037 063 000 - 37 (0 10 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 026 015 000 - 234297835 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 132 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa5 GPL,SL VS 132 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 3040 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 23/37 Celsius Lifetime Min/Max Temperature: 10/63 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 3/62 Celsius Min/Max Temperature Limit: 0/65 Celsius Temperature History Size (Index): 128 (112) Index Estimated Time Temperature Celsius 113 2021-12-08 07:37 36 ***************** 114 2021-12-08 08:36 37 ****************** ... ..( 3 skipped). .. ****************** 118 2021-12-08 12:32 37 ****************** 119 2021-12-08 13:31 38 ******************* 120 2021-12-08 14:30 38 ******************* 121 2021-12-08 15:29 37 ****************** ... ..( 6 skipped). .. ****************** 0 2021-12-08 22:22 37 ****************** 1 2021-12-08 23:21 36 ***************** ... ..( 6 skipped). .. ***************** 8 2021-12-09 06:14 36 ***************** 9 2021-12-09 07:13 37 ****************** ... ..( 6 skipped). .. ****************** 16 2021-12-09 14:06 37 ****************** 17 2021-12-09 15:05 38 ******************* ... ..( 5 skipped). .. ******************* 23 2021-12-09 20:59 38 ******************* 24 2021-12-09 21:58 37 ****************** ... ..( 10 skipped). .. ****************** 35 2021-12-10 08:47 37 ****************** 36 2021-12-10 09:46 38 ******************* 37 2021-12-10 10:45 37 ****************** 38 2021-12-10 11:44 38 ******************* 39 2021-12-10 12:43 38 ******************* 40 2021-12-10 13:42 38 ******************* 41 2021-12-10 14:41 37 ****************** ... ..( 7 skipped). .. ****************** 49 2021-12-10 22:33 37 ****************** 50 2021-12-10 23:32 38 ******************* ... ..( 2 skipped). .. ******************* 53 2021-12-11 02:29 38 ******************* 54 2021-12-11 03:28 37 ****************** 55 2021-12-11 04:27 37 ****************** 56 2021-12-11 05:26 38 ******************* 57 2021-12-11 06:25 40 ********************* 58 2021-12-11 07:24 39 ******************** 59 2021-12-11 08:23 38 ******************* 60 2021-12-11 09:22 37 ****************** ... ..( 22 skipped). .. ****************** 83 2021-12-12 07:59 37 ****************** 84 2021-12-12 08:58 38 ******************* ... ..( 8 skipped). .. ******************* 93 2021-12-12 17:49 38 ******************* 94 2021-12-12 18:48 37 ****************** ... ..( 14 skipped). .. ****************** 109 2021-12-13 09:33 37 ****************** 110 2021-12-13 10:32 ? - 111 2021-12-13 11:31 23 **** 112 2021-12-13 12:30 23 **** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-91-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-00ZF5A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Dec 13 12:56:21 2021 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10920) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 126) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 175 171 021 - 2241 4 Start_Stop_Count -O--CK 097 097 000 - 3600 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 074 074 000 - 19490 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1854 192 Power-Off_Retract_Count -O--CK 199 199 000 - 754 193 Load_Cycle_Count -O--CK 200 200 000 - 2845 194 Temperature_Celsius -O---K 108 084 000 - 35 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb5 GPL,SL VS 1 Device vendor specific log 0xb6 GPL VS 1 Device vendor specific log 0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15949 - # 2 Short offline Completed without error 00% 15925 - # 3 Short offline Completed without error 00% 15901 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 23/35 Celsius Lifetime Min/Max Temperature: 23/59 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (257) Index Estimated Time Temperature Celsius 258 2021-12-13 04:59 35 **************** ... ..(309 skipped). .. **************** 90 2021-12-13 10:09 35 **************** 91 2021-12-13 10:10 ? - 92 2021-12-13 10:11 23 **** 93 2021-12-13 10:12 23 **** 94 2021-12-13 10:13 24 ***** 95 2021-12-13 10:14 25 ****** 96 2021-12-13 10:15 26 ******* 97 2021-12-13 10:16 26 ******* 98 2021-12-13 10:17 27 ******** 99 2021-12-13 10:18 27 ******** 100 2021-12-13 10:19 27 ******** 101 2021-12-13 10:20 28 ********* 102 2021-12-13 10:21 28 ********* 103 2021-12-13 10:22 29 ********** 104 2021-12-13 10:23 29 ********** 105 2021-12-13 10:24 30 *********** ... ..( 4 skipped). .. *********** 110 2021-12-13 10:29 30 *********** 111 2021-12-13 10:30 31 ************ ... ..( 2 skipped). .. ************ 114 2021-12-13 10:33 31 ************ 115 2021-12-13 10:34 32 ************* ... ..( 3 skipped). .. ************* 119 2021-12-13 10:38 32 ************* 120 2021-12-13 10:39 33 ************** ... ..( 7 skipped). .. ************** 128 2021-12-13 10:47 33 ************** 129 2021-12-13 10:48 34 *************** ... ..( 19 skipped). .. *************** 149 2021-12-13 11:08 34 *************** 150 2021-12-13 11:09 35 **************** ... ..(106 skipped). .. **************** 257 2021-12-13 12:56 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 3551 Vendor specific /dev/sdc smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-91-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: KINGSTON SV300S37A120G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: 605ABBF0 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Dec 13 12:56:21 2021 -03 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 120 120 050 - 0/0 5 Retired_Block_Count PO--CK 100 100 003 - 0 9 Power_On_Hours_and_Msec -O--CK 074 074 000 - 23158h+11m+22.010s 12 Power_Cycle_Count -O--CK 098 098 000 - 2361 171 Program_Fail_Count -O-R-- 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 1064 177 Wear_Range_Delta ------ 000 000 000 - 1 181 Program_Fail_Count -O-R-- 100 100 000 - 0 182 Erase_Fail_Count -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O--C- 100 100 000 - 0 189 Airflow_Temperature_Cel ------ 035 050 000 - 35 (Min/Max 11/50) 194 Temperature_Celsius -O---K 035 050 000 - 35 (Min/Max 11/50) 195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/0 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/0 204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/0 230 Life_Curve_Status PO--C- 100 100 000 - 100 231 SSD_Life_Left ------ 095 095 011 - 51539607553 233 SandForce_Internal -O--CK 000 000 000 - 11964 234 SandForce_Internal -O--CK 000 000 000 - 4228 241 Lifetime_Writes_GiB -O--CK 000 000 000 - 4228 242 Lifetime_Reads_GiB -O--CK 000 000 000 - 3551 244 Unknown_Attribute ------ 097 097 010 - 7471218 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 6 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 11/50 Celsius Lifetime Min/Max Temperature: 11/63 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/85 Celsius Temperature History Size (Index): 478 (370) Index Estimated Time Temperature Celsius 371 2021-12-10 05:20 35 **************** ... ..( 8 skipped). .. **************** 380 2021-12-10 06:50 35 **************** 381 2021-12-10 07:00 36 ***************** ... ..( 2 skipped). .. ***************** 384 2021-12-10 07:30 36 ***************** 385 2021-12-10 07:40 35 **************** 386 2021-12-10 07:50 36 ***************** ... ..( 5 skipped). .. ***************** 392 2021-12-10 08:50 36 ***************** 393 2021-12-10 09:00 37 ****************** 394 2021-12-10 09:10 36 ***************** ... ..( 7 skipped). .. ***************** 402 2021-12-10 10:30 36 ***************** 403 2021-12-10 10:40 37 ****************** 404 2021-12-10 10:50 37 ****************** 405 2021-12-10 11:00 37 ****************** 406 2021-12-10 11:10 36 ***************** ... ..( 67 skipped). .. ***************** 474 2021-12-10 22:30 36 ***************** 475 2021-12-10 22:40 35 **************** 476 2021-12-10 22:50 36 ***************** 477 2021-12-10 23:00 36 ***************** 0 2021-12-10 23:10 35 **************** 1 2021-12-10 23:20 36 ***************** ... ..( 3 skipped). .. ***************** 5 2021-12-11 00:00 36 ***************** 6 2021-12-11 00:10 35 **************** 7 2021-12-11 00:20 36 ***************** 8 2021-12-11 00:30 36 ***************** 9 2021-12-11 00:40 35 **************** 10 2021-12-11 00:50 36 ***************** 11 2021-12-11 01:00 35 **************** 12 2021-12-11 01:10 35 **************** 13 2021-12-11 01:20 36 ***************** 14 2021-12-11 01:30 35 **************** ... ..( 20 skipped). .. **************** 35 2021-12-11 05:00 35 **************** 36 2021-12-11 05:10 36 ***************** 37 2021-12-11 05:20 36 ***************** 38 2021-12-11 05:30 37 ****************** 39 2021-12-11 05:40 37 ****************** 40 2021-12-11 05:50 38 ******************* 41 2021-12-11 06:00 38 ******************* 42 2021-12-11 06:10 38 ******************* 43 2021-12-11 06:20 39 ******************** 44 2021-12-11 06:30 39 ******************** 45 2021-12-11 06:40 39 ******************** 46 2021-12-11 06:50 38 ******************* 47 2021-12-11 07:00 38 ******************* 48 2021-12-11 07:10 37 ****************** 49 2021-12-11 07:20 37 ****************** 50 2021-12-11 07:30 36 ***************** ... ..( 7 skipped). .. ***************** 58 2021-12-11 08:50 36 ***************** 59 2021-12-11 09:00 35 **************** ... ..( 20 skipped). .. **************** 80 2021-12-11 12:30 35 **************** 81 2021-12-11 12:40 36 ***************** ... ..( 25 skipped). .. ***************** 107 2021-12-11 17:00 36 ***************** 108 2021-12-11 17:10 35 **************** 109 2021-12-11 17:20 36 ***************** 110 2021-12-11 17:30 36 ***************** 111 2021-12-11 17:40 35 **************** ... ..( 79 skipped). .. **************** 191 2021-12-12 07:00 35 **************** 192 2021-12-12 07:10 36 ***************** 193 2021-12-12 07:20 36 ***************** 194 2021-12-12 07:30 35 **************** ... ..( 8 skipped). .. **************** 203 2021-12-12 09:00 35 **************** 204 2021-12-12 09:10 36 ***************** ... ..( 84 skipped). .. ***************** 289 2021-12-12 23:20 36 ***************** 290 2021-12-12 23:30 35 **************** ... ..( 72 skipped). .. **************** 363 2021-12-13 11:40 35 **************** 364 2021-12-13 11:50 ? - 365 2021-12-13 12:00 30 *********** 366 2021-12-13 12:10 32 ************* 367 2021-12-13 12:20 33 ************** 368 2021-12-13 12:30 34 *************** 369 2021-12-13 12:40 34 *************** 370 2021-12-13 12:50 35 **************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 2361 --- Lifetime Power-On Resets 0x01 0x010 4 23158 --- Power-on Hours 0x01 0x018 6 8868361766 --- Logical Sectors Written 0x01 0x028 6 7447615172 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x010 1 35 --- Average Short Term Temperature 0x05 0x018 1 21 --- Average Long Term Temperature 0x05 0x020 1 61 --- Highest Temperature 0x05 0x028 1 13 --- Lowest Temperature 0x05 0x030 1 46 --- Highest Average Short Term Temperature 0x05 0x038 1 17 --- Lowest Average Short Term Temperature 0x05 0x040 1 42 --- Highest Average Long Term Temperature 0x05 0x048 1 21 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 0 --- Number of Hardware Resets 0x06 0x010 4 3975 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 3 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS


Hardware for Linux and BSD

GitHub