/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M9T Device Model: ST2000LM003 HN-M201RAD Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BE10001 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jul 22 19:08:14 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (22140) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 369) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 8 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 091 091 025 - 2880 4 Start_Stop_Count -O--CK 100 100 000 - 839 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 32933 10 Spin_Retry_Count -O--CK 252 252 051 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 563 191 G-Sense_Error_Rate -O---K 252 252 000 - 0 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 059 048 000 - 41 (Min/Max 13/52) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 5 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 2811 223 Load_Retry_Count -O--CK 100 100 000 - 687 225 Load_Cycle_Count -O--CK 098 098 000 - 24271 241 Total_LBAs_Written -O--CK 095 094 000 - 7363041 242 Total_LBAs_Read -O--CK 093 090 000 - 10274119 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 5 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 [4] occurred at disk power-on lifetime: 32931 hours (1372 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 60 00 00 00 25 86 50 40 00 Error: ICRC, ABRT at LBA = 0x00258650 = 2459216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 60 00 00 00 25 86 70 40 00 00:00:00.222 READ FPDMA QUEUED 60 00 00 00 80 00 00 00 25 86 50 40 00 00:00:00.222 READ FPDMA QUEUED 60 00 00 00 78 00 00 00 25 85 d8 40 00 00:00:00.222 READ FPDMA QUEUED 60 00 00 00 18 00 00 00 25 85 98 40 00 00:00:00.222 READ FPDMA QUEUED 60 00 00 00 38 00 00 00 25 85 38 40 00 00:00:00.222 READ FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 32931 hours (1372 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 00 00 00 00 0b c7 40 40 00 Error: ICRC, ABRT at LBA = 0x000bc740 = 771904 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 20 00 00 00 0b c7 80 40 00 00:00:00.217 READ FPDMA QUEUED 60 00 00 00 80 00 00 00 0b c7 20 40 00 00:00:00.217 READ FPDMA QUEUED 60 00 00 00 80 00 00 00 0b c6 a0 40 00 00:00:00.217 READ FPDMA QUEUED 60 00 00 00 18 00 00 00 0b c6 88 40 00 00:00:00.217 READ FPDMA QUEUED 60 00 00 00 80 00 00 00 0b c6 08 40 00 00:00:00.217 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 32930 hours (1372 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 ff a8 00 00 00 44 b7 80 40 00 Error: ICRC, ABRT at LBA = 0x0044b780 = 4503424 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 50 00 00 00 44 b7 88 40 00 00:00:00.721 READ FPDMA QUEUED 60 00 00 01 00 00 00 00 44 d3 d8 40 00 00:00:00.721 READ FPDMA QUEUED 60 00 00 01 00 00 00 00 44 d2 d8 40 00 00:00:00.721 READ FPDMA QUEUED 60 00 00 01 00 00 00 00 44 d1 d8 40 00 00:00:00.721 READ FPDMA QUEUED 60 00 00 01 00 00 00 00 44 d0 d8 40 00 00:00:00.721 READ FPDMA QUEUED Error 2 [1] occurred at disk power-on lifetime: 32778 hours (1365 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 02 00 00 03 f6 72 c0 40 00 Error: ICRC, ABRT at LBA = 0x03f672c0 = 66482880 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 10 00 00 03 f6 72 e2 40 00 00:00:05.727 READ FPDMA QUEUED 60 00 00 00 40 00 00 03 f6 72 b2 40 00 00:00:05.728 READ FPDMA QUEUED 60 00 00 00 40 00 00 03 f6 6c 7a 40 00 00:00:05.728 READ FPDMA QUEUED 60 00 00 00 40 00 00 03 f6 6d aa 40 00 00:00:05.728 READ FPDMA QUEUED 60 00 00 00 40 00 00 03 f6 6c ba 40 00 00:00:05.728 READ FPDMA QUEUED Error 1 [0] occurred at disk power-on lifetime: 8895 hours (370 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 70 00 00 c5 d7 82 c0 40 00 Error: ICRC, ABRT at LBA = 0xc5d782c0 = 3319235264 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 b0 00 00 c5 d7 82 d0 40 00 00:00:00.084 READ FPDMA QUEUED 60 00 00 00 50 00 00 ce ed 18 68 40 00 00:00:00.085 READ FPDMA QUEUED 60 00 00 00 21 00 00 02 20 2f 08 40 00 00:00:00.085 READ FPDMA QUEUED 60 00 00 00 10 00 00 00 1f ae 58 40 00 00:00:00.085 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 62 6d b8 40 00 00:00:00.085 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 39/41 Celsius Lifetime Min/Max Temperature: 13/52 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (35) Index Estimated Time Temperature Celsius 36 2023-07-22 08:30 41 ********************** 37 2023-07-22 08:35 36 ***************** 38 2023-07-22 08:40 36 ***************** 39 2023-07-22 08:45 37 ****************** ... ..( 2 skipped). .. ****************** 42 2023-07-22 09:00 37 ****************** 43 2023-07-22 09:05 38 ******************* 44 2023-07-22 09:10 38 ******************* 45 2023-07-22 09:15 37 ****************** 46 2023-07-22 09:20 37 ****************** 47 2023-07-22 09:25 36 ***************** 48 2023-07-22 09:30 35 **************** 49 2023-07-22 09:35 35 **************** 50 2023-07-22 09:40 35 **************** 51 2023-07-22 09:45 34 *************** ... ..( 2 skipped). .. *************** 54 2023-07-22 10:00 34 *************** 55 2023-07-22 10:05 35 **************** ... ..( 3 skipped). .. **************** 59 2023-07-22 10:25 35 **************** 60 2023-07-22 10:30 36 ***************** 61 2023-07-22 10:35 36 ***************** 62 2023-07-22 10:40 36 ***************** 63 2023-07-22 10:45 37 ****************** ... ..( 2 skipped). .. ****************** 66 2023-07-22 11:00 37 ****************** 67 2023-07-22 11:05 35 **************** 68 2023-07-22 11:10 34 *************** 69 2023-07-22 11:15 33 ************** 70 2023-07-22 11:20 32 ************* 71 2023-07-22 11:25 34 *************** 72 2023-07-22 11:30 36 ***************** ... ..( 3 skipped). .. ***************** 76 2023-07-22 11:50 36 ***************** 77 2023-07-22 11:55 37 ****************** 78 2023-07-22 12:00 36 ***************** 79 2023-07-22 12:05 38 ******************* 80 2023-07-22 12:10 38 ******************* 81 2023-07-22 12:15 37 ****************** 82 2023-07-22 12:20 36 ***************** ... ..( 3 skipped). .. ***************** 86 2023-07-22 12:40 36 ***************** 87 2023-07-22 12:45 39 ******************** 88 2023-07-22 12:50 37 ****************** 89 2023-07-22 12:55 37 ****************** 90 2023-07-22 13:00 36 ***************** ... ..( 2 skipped). .. ***************** 93 2023-07-22 13:15 36 ***************** 94 2023-07-22 13:20 37 ****************** 95 2023-07-22 13:25 37 ****************** 96 2023-07-22 13:30 36 ***************** ... ..( 3 skipped). .. ***************** 100 2023-07-22 13:50 36 ***************** 101 2023-07-22 13:55 37 ****************** 102 2023-07-22 14:00 38 ******************* 103 2023-07-22 14:05 38 ******************* 104 2023-07-22 14:10 39 ******************** 105 2023-07-22 14:15 39 ******************** 106 2023-07-22 14:20 39 ******************** 107 2023-07-22 14:25 40 ********************* ... ..( 3 skipped). .. ********************* 111 2023-07-22 14:45 40 ********************* 112 2023-07-22 14:50 39 ******************** 113 2023-07-22 14:55 39 ******************** 114 2023-07-22 15:00 40 ********************* 115 2023-07-22 15:05 41 ********************** ... ..( 3 skipped). .. ********************** 119 2023-07-22 15:25 41 ********************** 120 2023-07-22 15:30 40 ********************* 121 2023-07-22 15:35 40 ********************* 122 2023-07-22 15:40 39 ******************** 123 2023-07-22 15:45 37 ****************** 124 2023-07-22 15:50 36 ***************** 125 2023-07-22 15:55 35 **************** 126 2023-07-22 16:00 35 **************** 127 2023-07-22 16:05 36 ***************** 0 2023-07-22 16:10 37 ****************** 1 2023-07-22 16:15 36 ***************** 2 2023-07-22 16:20 36 ***************** 3 2023-07-22 16:25 35 **************** 4 2023-07-22 16:30 35 **************** 5 2023-07-22 16:35 34 *************** 6 2023-07-22 16:40 34 *************** 7 2023-07-22 16:45 34 *************** 8 2023-07-22 16:50 35 **************** ... ..( 3 skipped). .. **************** 12 2023-07-22 17:10 35 **************** 13 2023-07-22 17:15 36 ***************** 14 2023-07-22 17:20 38 ******************* 15 2023-07-22 17:25 39 ******************** 16 2023-07-22 17:30 38 ******************* 17 2023-07-22 17:35 38 ******************* 18 2023-07-22 17:40 38 ******************* 19 2023-07-22 17:45 42 *********************** 20 2023-07-22 17:50 41 ********************** 21 2023-07-22 17:55 36 ***************** 22 2023-07-22 18:00 37 ****************** 23 2023-07-22 18:05 41 ********************** 24 2023-07-22 18:10 39 ******************** 25 2023-07-22 18:15 39 ******************** 26 2023-07-22 18:20 36 ***************** 27 2023-07-22 18:25 36 ***************** 28 2023-07-22 18:30 35 **************** 29 2023-07-22 18:35 35 **************** 30 2023-07-22 18:40 35 **************** 31 2023-07-22 18:45 39 ******************** 32 2023-07-22 18:50 39 ******************** 33 2023-07-22 18:55 39 ******************** 34 2023-07-22 19:00 41 ********************** 35 2023-07-22 19:05 41 ********************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 2 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific