Probe #89e3486e13 of ASUSTek P7H55-M Desktop Computer

Log: smartctl

/dev/sda === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P80 Device Model: SAMSUNG SP1213N Serial Number: -- Firmware Version: TL100-24 User Capacity: 120 059 362 816 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 T13/1532D revision 0 Local Time is: Sat May 12 01:54:43 2018 +08 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 246) Self-test routine in progress... 60% of test remaining. Total time to complete Offline data collection: ( 4320) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 72) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 051 - 49 3 Spin_Up_Time POS--- 078 054 000 - 4224 4 Start_Stop_Count -O--CK 078 078 000 - 22822 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 1 7 Seek_Error_Rate PO-R-- 253 253 051 - 0 8 Seek_Time_Performance --S--K 253 253 000 - 0 9 Power_On_Half_Minutes -O--CK 096 096 000 - 20760h+30m 10 Spin_Retry_Count PO--C- 253 253 049 - 0 12 Power_Cycle_Count -O--CK 091 091 000 - 9470 194 Temperature_Celsius -O---K 127 070 000 - 37 195 Hardware_ECC_Recovered -O-R-- 100 100 000 - 124522412 196 Reallocated_Event_Count -O--C- 100 100 000 - 2 197 Current_Pending_Sector PO--CK 253 253 010 - 0 198 Offline_Uncorrectable P---CK 100 100 010 - 1 199 UDMA_CRC_Error_Count PO-R-- 100 100 051 - 0 200 Multi_Zone_Error_Rate PO-R-- 100 100 051 - 0 201 Soft_Read_Error_Rate PO-R-- 100 100 051 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x06 SL R/O 2 SMART self-test log 0x80-0x9f SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 1034 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1034 occurred at disk power-on lifetime: 20628 hours (859 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 28 40 39 07 e8 Error: UNC at LBA = 0x08073940 = 134691136 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 00 28 40 39 07 e8 00 04:30:06.500 READ MULTIPLE ec 00 00 00 00 00 a0 00 04:30:06.500 IDENTIFY DEVICE ef 03 08 00 00 00 a0 00 04:30:06.500 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 a0 00 04:30:06.500 IDENTIFY DEVICE 00 00 01 01 00 00 a0 00 04:30:06.375 NOP [Abort queued commands] Error 1033 occurred at disk power-on lifetime: 20628 hours (859 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 28 40 39 07 e8 Error: UNC at LBA = 0x08073940 = 134691136 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 00 28 40 39 07 e8 00 04:30:05.125 READ MULTIPLE ec 00 00 00 00 00 a0 00 04:30:05.125 IDENTIFY DEVICE ef 03 08 00 00 00 a0 00 04:30:05.125 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 a0 00 04:30:05.125 IDENTIFY DEVICE 00 00 01 01 00 00 a0 00 04:30:04.938 NOP [Abort queued commands] Error 1032 occurred at disk power-on lifetime: 20628 hours (859 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 28 40 39 07 e8 Error: ABRT at LBA = 0x08073940 = 134691136 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 00 28 40 39 07 e8 00 04:30:03.688 READ MULTIPLE ec 00 00 00 00 00 a0 00 04:30:03.688 IDENTIFY DEVICE ef 03 08 00 00 00 a0 00 04:30:03.688 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 a0 00 04:30:03.688 IDENTIFY DEVICE 00 00 01 01 00 00 a0 00 04:30:03.500 NOP [Abort queued commands] Error 1031 occurred at disk power-on lifetime: 20628 hours (859 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 28 40 39 07 e8 Error: UNC at LBA = 0x08073940 = 134691136 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 00 28 40 39 07 e8 00 04:30:02.250 READ MULTIPLE ec 00 00 00 00 00 a0 00 04:30:02.250 IDENTIFY DEVICE ef 03 08 00 00 00 a0 00 04:30:02.250 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 a0 00 04:30:02.250 IDENTIFY DEVICE 00 00 01 01 00 00 a0 00 04:30:02.125 NOP [Abort queued commands] Error 1030 occurred at disk power-on lifetime: 20628 hours (859 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 28 40 39 07 e8 Error: UNC at LBA = 0x08073940 = 134691136 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 00 28 40 39 07 e8 00 04:30:00.875 READ MULTIPLE ec 00 00 00 00 00 a0 00 04:30:00.875 IDENTIFY DEVICE ef 03 08 00 00 00 a0 00 04:30:00.875 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 a0 00 04:30:00.875 IDENTIFY DEVICE 00 00 01 01 00 00 a0 00 04:30:00.688 NOP [Abort queued commands] SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST3500418AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC38 User Capacity: 500 107 862 016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat May 12 01:54:43 2018 +08 ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213891en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 86) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 117 099 006 - 122431797 3 Spin_Up_Time PO---- 098 097 000 - 0 4 Start_Stop_Count -O--CK 092 092 020 - 8724 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 086 060 030 - 409279293 9 Power_On_Hours -O--CK 071 071 000 - 26004 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 096 096 020 - 4325 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 099 092 000 - 77310596912 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 063 037 045 Past 37 (0 37 39 37 0) 194 Temperature_Celsius -O---K 037 063 000 - 37 (0 14 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 042 025 000 - 122431797 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 37832 (56 249 0) 241 Total_LBAs_Written ------ 100 253 000 - 4029501723 242 Total_LBAs_Read ------ 100 253 000 - 1964591964 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 00% 19627 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 37/39 Celsius Lifetime Min/Max Temperature: 14/63 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (32) Index Estimated Time Temperature Celsius 33 2018-05-06 20:17 39 ******************** 34 2018-05-06 21:16 38 ******************* 35 2018-05-06 22:15 38 ******************* 36 2018-05-06 23:14 38 ******************* 37 2018-05-07 00:13 41 ********************** 38 2018-05-07 01:12 46 *************************** 39 2018-05-07 02:11 42 *********************** 40 2018-05-07 03:10 ? - 41 2018-05-07 04:09 19 - 42 2018-05-07 05:08 19 - 43 2018-05-07 06:07 35 **************** 44 2018-05-07 07:06 36 ***************** 45 2018-05-07 08:05 35 **************** 46 2018-05-07 09:04 35 **************** 47 2018-05-07 10:03 35 **************** 48 2018-05-07 11:02 34 *************** 49 2018-05-07 12:01 36 ***************** ... ..( 2 skipped). .. ***************** 52 2018-05-07 14:58 36 ***************** 53 2018-05-07 15:57 35 **************** 54 2018-05-07 16:56 34 *************** 55 2018-05-07 17:55 34 *************** 56 2018-05-07 18:54 35 **************** 57 2018-05-07 19:53 36 ***************** 58 2018-05-07 20:52 ? - 59 2018-05-07 21:51 18 - 60 2018-05-07 22:50 18 - 61 2018-05-07 23:49 36 ***************** 62 2018-05-08 00:48 36 ***************** 63 2018-05-08 01:47 37 ****************** 64 2018-05-08 02:46 36 ***************** 65 2018-05-08 03:45 37 ****************** 66 2018-05-08 04:44 36 ***************** 67 2018-05-08 05:43 35 **************** 68 2018-05-08 06:42 35 **************** 69 2018-05-08 07:41 36 ***************** 70 2018-05-08 08:40 37 ****************** 71 2018-05-08 09:39 36 ***************** 72 2018-05-08 10:38 40 ********************* 73 2018-05-08 11:37 37 ****************** 74 2018-05-08 12:36 ? - 75 2018-05-08 13:35 19 - 76 2018-05-08 14:34 19 - 77 2018-05-08 15:33 35 **************** 78 2018-05-08 16:32 36 ***************** 79 2018-05-08 17:31 37 ****************** 80 2018-05-08 18:30 37 ****************** 81 2018-05-08 19:29 36 ***************** 82 2018-05-08 20:28 36 ***************** 83 2018-05-08 21:27 37 ****************** 84 2018-05-08 22:26 36 ***************** 85 2018-05-08 23:25 36 ***************** 86 2018-05-09 00:24 35 **************** 87 2018-05-09 01:23 36 ***************** 88 2018-05-09 02:22 37 ****************** 89 2018-05-09 03:21 36 ***************** 90 2018-05-09 04:20 36 ***************** 91 2018-05-09 05:19 ? - 92 2018-05-09 06:18 18 - 93 2018-05-09 07:17 18 - 94 2018-05-09 08:16 35 **************** ... ..( 2 skipped). .. **************** 97 2018-05-09 11:13 35 **************** 98 2018-05-09 12:12 36 ***************** 99 2018-05-09 13:11 36 ***************** 100 2018-05-09 14:10 36 ***************** 101 2018-05-09 15:09 37 ****************** 102 2018-05-09 16:08 37 ****************** 103 2018-05-09 17:07 36 ***************** 104 2018-05-09 18:06 36 ***************** 105 2018-05-09 19:05 36 ***************** 106 2018-05-09 20:04 37 ****************** 107 2018-05-09 21:03 45 ************************** 108 2018-05-09 22:02 49 ****************************** 109 2018-05-09 23:01 ? - 110 2018-05-10 00:00 18 - 111 2018-05-10 00:59 18 - 112 2018-05-10 01:58 34 *************** 113 2018-05-10 02:57 37 ****************** 114 2018-05-10 03:56 35 **************** 115 2018-05-10 04:55 34 *************** 116 2018-05-10 05:54 35 **************** 117 2018-05-10 06:53 39 ******************** 118 2018-05-10 07:52 37 ****************** 119 2018-05-10 08:51 38 ******************* 120 2018-05-10 09:50 38 ******************* 121 2018-05-10 10:49 38 ******************* 122 2018-05-10 11:48 ? - 123 2018-05-10 12:47 18 - 124 2018-05-10 13:46 ? - 125 2018-05-10 14:45 19 - 126 2018-05-10 15:44 19 - 127 2018-05-10 16:43 36 ***************** 0 2018-05-10 17:42 41 ********************** 1 2018-05-10 18:41 36 ***************** 2 2018-05-10 19:40 35 **************** 3 2018-05-10 20:39 36 ***************** 4 2018-05-10 21:38 37 ****************** 5 2018-05-10 22:37 47 **************************** 6 2018-05-10 23:36 49 ****************************** 7 2018-05-11 00:35 41 ********************** 8 2018-05-11 01:34 36 ***************** 9 2018-05-11 02:33 ? - 10 2018-05-11 03:32 19 - 11 2018-05-11 04:31 19 - 12 2018-05-11 05:30 34 *************** 13 2018-05-11 06:29 36 ***************** 14 2018-05-11 07:28 37 ****************** 15 2018-05-11 08:27 37 ****************** 16 2018-05-11 09:26 35 **************** 17 2018-05-11 10:25 36 ***************** 18 2018-05-11 11:24 35 **************** 19 2018-05-11 12:23 36 ***************** 20 2018-05-11 13:22 38 ******************* 21 2018-05-11 14:21 ? - 22 2018-05-11 15:20 36 ***************** 23 2018-05-11 16:19 36 ***************** 24 2018-05-11 17:18 39 ******************** 25 2018-05-11 18:17 36 ***************** 26 2018-05-11 19:16 38 ******************* 27 2018-05-11 20:15 47 **************************** 28 2018-05-11 21:14 49 ****************************** 29 2018-05-11 22:13 ? - 30 2018-05-11 23:12 39 ******************** 31 2018-05-12 00:11 39 ******************** 32 2018-05-12 01:10 37 ****************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 11 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS


Hardware for Linux and BSD

GitHub