/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.74-gentoo-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SAMSUNG MZVLB1T0HBLR-000L2 Serial Number: -- Firmware Version: 3L1QEXF7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,024,209,543,168 [1.02 TB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] Namespace 1 Utilization: 660,095,963,136 [660 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Fri Oct 21 23:53:02 2022 CEST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 84 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.00W - - 0 0 0 0 0 0 1 + 6.30W - - 1 1 1 1 0 0 2 + 3.50W - - 2 2 2 2 0 0 3 - 0.0760W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 51 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 14,074,584 [7.20 TB] Data Units Written: 38,219,184 [19.5 TB] Host Read Commands: 234,776,798 Host Write Commands: 433,028,994 Controller Busy Time: 2,456 Power Cycles: 2,212 Power On Hours: 3,226 Unsafe Shutdowns: 1,297 Media and Data Integrity Errors: 0 Error Information Log Entries: 731 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 51 Celsius Temperature Sensor 2: 70 Celsius Thermal Temp. 1 Transition Count: 1 Thermal Temp. 1 Total Time: 10 Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 731 0 0x4005 0x4004 - 0 0 - /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.15.74-gentoo-x86_64] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD5000BEVT-80A0RT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Oct 21 23:53:02 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14400) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 167) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 172 151 021 - 2391 4 Start_Stop_Count -O--CK 076 076 000 - 24280 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 9 Power_On_Hours -O--CK 091 091 000 - 6990 10 Spin_Retry_Count -O--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2385 191 G-Sense_Error_Rate -O--CK 049 049 000 - 51 192 Power-Off_Retract_Count -O--CK 199 199 000 - 1405 193 Load_Cycle_Count -O--CK 042 042 000 - 476217 194 Temperature_Celsius -O---K 114 094 000 - 33 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 1 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 2 200 Multi_Zone_Error_Rate ---R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 23 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 23 [22] occurred at disk power-on lifetime: 5288 hours (220 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 07 70 71 8a 47 00 Error: UNC 1 sectors at LBA = 0x0770718a = 124809610 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 01 00 00 07 70 71 8a 47 00 03:21:55.489 READ DMA EXT 25 03 03 00 01 00 00 07 70 71 8e 47 00 03:21:55.489 READ DMA EXT 25 03 03 00 01 00 00 07 70 71 8d 47 00 03:21:55.488 READ DMA EXT 25 03 03 00 01 00 00 07 70 71 8c 47 00 03:21:55.487 READ DMA EXT 25 03 03 00 01 00 00 07 70 71 8b 47 00 03:21:55.466 READ DMA EXT Error 22 [21] occurred at disk power-on lifetime: 5288 hours (220 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 01 00 00 07 70 71 8a 47 00 Error: UNC 1 sectors at LBA = 0x0770718a = 124809610 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 01 00 00 07 70 71 8a 47 00 03:21:53.015 READ DMA EXT 25 03 03 00 01 00 00 07 70 71 89 47 00 03:21:53.014 READ DMA EXT 25 03 03 00 01 00 00 07 70 71 88 47 00 03:21:53.014 READ DMA EXT 25 03 03 00 01 00 00 07 70 71 87 47 00 03:21:53.013 READ DMA EXT 25 03 03 00 08 00 00 07 70 71 87 47 00 03:21:46.736 READ DMA EXT Error 21 [20] occurred at disk power-on lifetime: 5288 hours (220 days + 8 hours) When the command that caused the error occurred, the device was in standby mode. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 07 70 71 87 47 00 Error: UNC 8 sectors at LBA = 0x07707187 = 124809607 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 08 00 00 07 70 71 87 47 00 03:21:46.736 READ DMA EXT 25 03 03 00 40 00 00 02 81 01 67 42 00 03:04:30.143 READ DMA EXT 25 03 03 00 20 00 00 02 81 01 47 42 00 03:04:30.142 READ DMA EXT 25 03 03 00 08 00 00 02 81 01 3f 42 00 03:04:30.130 READ DMA EXT 25 03 03 00 20 00 00 02 07 f8 b7 42 00 03:04:30.129 READ DMA EXT Error 20 [19] occurred at disk power-on lifetime: 5285 hours (220 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 07 70 71 87 47 00 Error: UNC 8 sectors at LBA = 0x07707187 = 124809607 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 08 00 00 07 70 71 87 47 00 00:27:55.544 READ DMA EXT 25 03 03 00 08 00 00 07 70 71 7f 47 00 00:27:55.544 READ DMA EXT 25 03 03 00 08 00 00 07 70 71 77 47 00 00:27:55.543 READ DMA EXT 25 03 03 00 08 00 00 07 70 71 6f 47 00 00:27:55.543 READ DMA EXT 25 03 03 00 08 00 00 07 70 71 67 47 00 00:27:55.542 READ DMA EXT Error 19 [18] occurred at disk power-on lifetime: 5285 hours (220 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 f0 00 00 07 70 71 2f 47 00 Error: UNC 240 sectors at LBA = 0x0770712f = 124809519 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 f0 00 00 07 70 71 2f 47 00 00:27:53.042 READ DMA EXT 25 03 03 00 f0 00 00 07 70 70 3f 47 00 00:27:53.039 READ DMA EXT 25 03 03 00 20 00 00 07 70 70 1f 47 00 00:27:53.038 READ DMA EXT 25 03 03 00 f0 00 00 07 70 6f 2f 47 00 00:27:53.035 READ DMA EXT 25 03 03 00 f0 00 00 07 70 6e 3f 47 00 00:27:53.031 READ DMA EXT Error 18 [17] occurred at disk power-on lifetime: 5285 hours (220 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 07 41 b1 67 47 00 Error: UNC 8 sectors at LBA = 0x0741b167 = 121745767 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 08 00 00 07 41 b1 67 47 00 00:27:10.242 READ DMA EXT 25 03 03 00 08 00 00 07 41 b1 5f 47 00 00:27:10.241 READ DMA EXT 25 03 03 00 08 00 00 07 41 b1 57 47 00 00:27:10.241 READ DMA EXT 25 03 03 00 08 00 00 07 41 b1 4f 47 00 00:27:10.240 READ DMA EXT 25 03 03 00 08 00 00 07 41 b1 47 47 00 00:27:10.240 READ DMA EXT Error 17 [16] occurred at disk power-on lifetime: 5285 hours (220 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 f0 00 00 07 41 b1 2f 47 00 Error: UNC 240 sectors at LBA = 0x0741b12f = 121745711 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 f0 00 00 07 41 b1 2f 47 00 00:27:07.806 READ DMA EXT 25 03 03 00 f0 00 00 07 41 b0 3f 47 00 00:27:07.804 READ DMA EXT 25 03 03 00 20 00 00 07 41 b0 1f 47 00 00:27:07.803 READ DMA EXT 25 03 03 00 f0 00 00 07 41 af 2f 47 00 00:27:07.800 READ DMA EXT 25 03 03 00 f0 00 00 07 41 ae 3f 47 00 00:27:07.797 READ DMA EXT Error 16 [15] occurred at disk power-on lifetime: 5284 hours (220 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 07 70 71 87 47 00 Error: UNC 8 sectors at LBA = 0x07707187 = 124809607 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 03 03 00 08 00 00 07 70 71 87 47 00 00:03:48.166 READ DMA EXT 25 03 03 00 08 00 00 07 70 71 87 47 00 00:03:45.717 READ DMA EXT 25 03 03 00 08 00 00 07 70 71 7f 47 00 00:03:45.717 READ DMA EXT 25 03 03 00 08 00 00 07 70 71 77 47 00 00:03:45.717 READ DMA EXT 25 03 03 00 08 00 00 07 70 71 6f 47 00 00:03:45.716 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 24/35 Celsius Lifetime Min/Max Temperature: 24/55 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (56) Index Estimated Time Temperature Celsius 57 2022-10-21 21:46 35 **************** 58 2022-10-21 21:47 36 ***************** 59 2022-10-21 21:48 ? - 60 2022-10-21 21:49 36 ***************** ... ..( 26 skipped). .. ***************** 87 2022-10-21 22:16 36 ***************** 88 2022-10-21 22:17 37 ****************** ... ..( 9 skipped). .. ****************** 98 2022-10-21 22:27 37 ****************** 99 2022-10-21 22:28 36 ***************** 100 2022-10-21 22:29 36 ***************** 101 2022-10-21 22:30 ? - 102 2022-10-21 22:31 37 ****************** 103 2022-10-21 22:32 37 ****************** 104 2022-10-21 22:33 36 ***************** 105 2022-10-21 22:34 ? - 106 2022-10-21 22:35 24 ***** 107 2022-10-21 22:36 ? - 108 2022-10-21 22:37 25 ****** 109 2022-10-21 22:38 24 ***** 110 2022-10-21 22:39 25 ****** 111 2022-10-21 22:40 25 ****** 112 2022-10-21 22:41 26 ******* 113 2022-10-21 22:42 ? - 114 2022-10-21 22:43 26 ******* 115 2022-10-21 22:44 26 ******* 116 2022-10-21 22:45 ? - 117 2022-10-21 22:46 32 ************* 118 2022-10-21 22:47 ? - 119 2022-10-21 22:48 24 ***** 120 2022-10-21 22:49 24 ***** 121 2022-10-21 22:50 ? - 122 2022-10-21 22:51 24 ***** 123 2022-10-21 22:52 24 ***** 124 2022-10-21 22:53 24 ***** 125 2022-10-21 22:54 25 ****** 126 2022-10-21 22:55 ? - 127 2022-10-21 22:56 26 ******* 0 2022-10-21 22:57 26 ******* 1 2022-10-21 22:58 27 ******** 2 2022-10-21 22:59 ? - 3 2022-10-21 23:00 27 ******** 4 2022-10-21 23:01 27 ******** 5 2022-10-21 23:02 ? - 6 2022-10-21 23:03 27 ******** 7 2022-10-21 23:04 27 ******** 8 2022-10-21 23:05 ? - 9 2022-10-21 23:06 28 ********* 10 2022-10-21 23:07 27 ******** 11 2022-10-21 23:08 27 ******** 12 2022-10-21 23:09 28 ********* 13 2022-10-21 23:10 28 ********* 14 2022-10-21 23:11 29 ********** 15 2022-10-21 23:12 30 *********** 16 2022-10-21 23:13 30 *********** 17 2022-10-21 23:14 30 *********** 18 2022-10-21 23:15 31 ************ 19 2022-10-21 23:16 31 ************ 20 2022-10-21 23:17 31 ************ 21 2022-10-21 23:18 32 ************* ... ..( 2 skipped). .. ************* 24 2022-10-21 23:21 32 ************* 25 2022-10-21 23:22 33 ************** ... ..( 4 skipped). .. ************** 30 2022-10-21 23:27 33 ************** 31 2022-10-21 23:28 34 *************** ... ..( 7 skipped). .. *************** 39 2022-10-21 23:36 34 *************** 40 2022-10-21 23:37 35 **************** 41 2022-10-21 23:38 35 **************** 42 2022-10-21 23:39 34 *************** 43 2022-10-21 23:40 34 *************** 44 2022-10-21 23:41 ? - 45 2022-10-21 23:42 35 **************** 46 2022-10-21 23:43 ? - 47 2022-10-21 23:44 35 **************** 48 2022-10-21 23:45 ? - 49 2022-10-21 23:46 35 **************** 50 2022-10-21 23:47 34 *************** 51 2022-10-21 23:48 34 *************** 52 2022-10-21 23:49 34 *************** 53 2022-10-21 23:50 33 ************** 54 2022-10-21 23:51 ? - 55 2022-10-21 23:52 34 *************** 56 2022-10-21 23:53 33 ************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x8000 4 2895 Vendor specific