/dev/sda === START OF INFORMATION SECTION === Model Family: Intel 520 Series SSDs Device Model: INTEL SSDSC2CW120A3 Serial Number: -- LU WWN Device Id: 5 001517 ... Firmware Version: 400i User Capacity: 120 034 123 776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jan 22 18:40:57 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Disabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2097) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 911493h+13m+25.750s 12 Power_Cycle_Count -O--CK 098 098 000 - 2282 170 Available_Reservd_Space PO--CK 100 100 010 - 0 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2282 184 End-to-End_Error PO--CK 100 100 090 - 0 187 Uncorrectable_Error_Cnt POSR-- 105 105 050 - 10105446 192 Power-Off_Retract_Count -O--CK 100 100 000 - 2282 225 Host_Writes_32MiB -O--CK 100 100 000 - 424957 226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 50 228 Workload_Minutes -O--CK 100 100 000 - 65535 232 Available_Reservd_Space PO--CK 100 100 010 - 0 233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 241 Host_Writes_32MiB -O--CK 100 100 000 - 424957 242 Host_Reads_32MiB -O--CK 100 100 000 - 440392 249 NAND_Writes_1GiB PO--C- 100 100 000 - 16695 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 1 Device Statistics log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: 127/-127 Celsius Lifetime Min/Max Temperature: 30/30 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 0 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 0 (252) Temperature History is empty SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 2) == 1 0x008 4 2303 Lifetime Power-On Resets 1 0x010 4 16699 Power-on Hours 1 0x018 6 29149420016 Logical Sectors Written 1 0x028 6 30382726820 Logical Sectors Read 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 0 Number of Reported Uncorrectable Errors 4 0x010 4 13617 Resets Between Cmd Acceptance and Completion 6 ===== = = == Transport Statistics (rev 1) == 6 0x008 4 13617 Number of Hardware Resets 6 0x010 4 14495 Number of ASR Events 6 0x018 4 1 Number of Interface CRC Errors 7 ===== = = == Solid State Device Statistics (rev 1) == 7 0x008 1 255 Percentage Used Endurance Indicator SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 9 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Seagate Barracuda LP Device Model: ST31500541AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC34 User Capacity: 1 500 301 910 016 bytes [1,50 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Jan 22 18:40:57 2016 MSK ==> WARNING: A firmware update for this drive may be available, see the following Seagate web pages: http://knowledge.seagate.com/articles/en_US/FAQ/207931en http://knowledge.seagate.com/articles/en_US/FAQ/213915en SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 192 (intermediate level without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 643) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 369) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 096 006 - 68682043 3 Spin_Up_Time PO---- 100 100 000 - 0 4 Start_Stop_Count -O--CK 087 087 020 - 13329 5 Reallocated_Sector_Ct PO--CK 095 095 036 - 225 7 Seek_Error_Rate POSR-- 048 041 030 - 1623521291015 9 Power_On_Hours -O--CK 074 074 000 - 23355 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 037 020 - 3960 183 Runtime_Bad_Block -O--CK 099 099 000 - 1 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 096 000 - 876187549933 189 High_Fly_Writes -O-RCK 098 098 000 - 2 190 Airflow_Temperature_Cel -O---K 055 042 045 Past 45 (Min/Max 26/45 #14) 194 Temperature_Celsius -O---K 045 058 000 - 45 (0 21 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 049 044 000 - 68682043 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 30207 (164 173 0) 241 Total_LBAs_Written ------ 100 253 000 - 2447891027 242 Total_LBAs_Read ------ 100 253 000 - 73132114 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL,SL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 45 Celsius Power Cycle Min/Max Temperature: 26/45 Celsius Lifetime Min/Max Temperature: 21/58 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (60) Index Estimated Time Temperature Celsius 61 2016-01-17 13:01 44 ************************* 62 2016-01-17 14:00 45 ************************** 63 2016-01-17 14:59 ? - 64 2016-01-17 15:58 25 ****** 65 2016-01-17 16:57 25 ****** 66 2016-01-17 17:56 27 ******** 67 2016-01-17 18:55 42 *********************** 68 2016-01-17 19:54 45 ************************** ... ..( 7 skipped). .. ************************** 76 2016-01-18 03:46 45 ************************** 77 2016-01-18 04:45 44 ************************* 78 2016-01-18 05:44 45 ************************** 79 2016-01-18 06:43 45 ************************** 80 2016-01-18 07:42 ? - 81 2016-01-18 08:41 25 ****** 82 2016-01-18 09:40 25 ****** 83 2016-01-18 10:39 27 ******** 84 2016-01-18 11:38 42 *********************** 85 2016-01-18 12:37 ? - 86 2016-01-18 13:36 27 ******** 87 2016-01-18 14:35 27 ******** 88 2016-01-18 15:34 43 ************************ 89 2016-01-18 16:33 45 ************************** ... ..( 5 skipped). .. ************************** 95 2016-01-18 22:27 45 ************************** 96 2016-01-18 23:26 ? - 97 2016-01-19 00:25 25 ****** 98 2016-01-19 01:24 ? - 99 2016-01-19 02:23 26 ******* 100 2016-01-19 03:22 26 ******* 101 2016-01-19 04:21 27 ******** 102 2016-01-19 05:20 43 ************************ 103 2016-01-19 06:19 44 ************************* ... ..( 2 skipped). .. ************************* 106 2016-01-19 09:16 44 ************************* 107 2016-01-19 10:15 45 ************************** 108 2016-01-19 11:14 52 ********************************* 109 2016-01-19 12:13 51 ******************************** 110 2016-01-19 13:12 ? - 111 2016-01-19 14:11 43 ************************ 112 2016-01-19 15:10 43 ************************ 113 2016-01-19 16:09 45 ************************** ... ..( 2 skipped). .. ************************** 116 2016-01-19 19:06 45 ************************** 117 2016-01-19 20:05 ? - 118 2016-01-19 21:04 41 ********************** 119 2016-01-19 22:03 ? - 120 2016-01-19 23:02 26 ******* 121 2016-01-20 00:01 ? - 122 2016-01-20 01:00 25 ****** 123 2016-01-20 01:59 25 ****** 124 2016-01-20 02:58 30 *********** 125 2016-01-20 03:57 42 *********************** 126 2016-01-20 04:56 44 ************************* 127 2016-01-20 05:55 45 ************************** ... ..( 10 skipped). .. ************************** 10 2016-01-20 16:44 45 ************************** 11 2016-01-20 17:43 ? - 12 2016-01-20 18:42 26 ******* 13 2016-01-20 19:41 ? - 14 2016-01-20 20:40 26 ******* 15 2016-01-20 21:39 26 ******* 16 2016-01-20 22:38 34 *************** 17 2016-01-20 23:37 42 *********************** 18 2016-01-21 00:36 45 ************************** 19 2016-01-21 01:35 45 ************************** 20 2016-01-21 02:34 44 ************************* 21 2016-01-21 03:33 45 ************************** ... ..( 3 skipped). .. ************************** 25 2016-01-21 07:29 45 ************************** 26 2016-01-21 08:28 ? - 27 2016-01-21 09:27 31 ************ 28 2016-01-21 10:26 31 ************ 29 2016-01-21 11:25 44 ************************* 30 2016-01-21 12:24 ? - 31 2016-01-21 13:23 26 ******* 32 2016-01-21 14:22 ? - 33 2016-01-21 15:21 26 ******* 34 2016-01-21 16:20 26 ******* 35 2016-01-21 17:19 27 ******** 36 2016-01-21 18:18 43 ************************ 37 2016-01-21 19:17 45 ************************** ... ..( 3 skipped). .. ************************** 41 2016-01-21 23:13 45 ************************** 42 2016-01-22 00:12 ? - 43 2016-01-22 01:11 43 ************************ 44 2016-01-22 02:10 43 ************************ 45 2016-01-22 03:09 45 ************************** 46 2016-01-22 04:08 44 ************************* 47 2016-01-22 05:07 45 ************************** 48 2016-01-22 06:06 45 ************************** 49 2016-01-22 07:05 45 ************************** 50 2016-01-22 08:04 ? - 51 2016-01-22 09:03 26 ******* 52 2016-01-22 10:02 ? - 53 2016-01-22 11:01 26 ******* 54 2016-01-22 12:00 26 ******* 55 2016-01-22 12:59 28 ********* 56 2016-01-22 13:58 42 *********************** 57 2016-01-22 14:57 44 ************************* 58 2016-01-22 15:56 44 ************************* 59 2016-01-22 16:55 45 ************************** 60 2016-01-22 17:54 45 ************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdc === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K2000 Device Model: Hitachi HDS722020ALA330 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JKAOA20N User Capacity: 2 000 398 934 016 bytes [2,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Jan 22 18:40:58 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (22477) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 375) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 133 133 054 - 100 3 Spin_Up_Time POS--- 113 113 024 - 636 (Average 636) 4 Start_Stop_Count -O--C- 099 099 000 - 7579 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 110 110 020 - 40 9 Power_On_Hours -O--C- 097 097 000 - 27484 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 3590 192 Power-Off_Retract_Count -O--CK 094 094 000 - 7789 193 Load_Cycle_Count -O--C- 094 094 000 - 7789 194 Temperature_Celsius -O---- 113 113 000 - 53 (Min/Max 21/64) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] occurred at disk power-on lifetime: 15338 hours (639 days + 2 hours) When the command that caused the error occurred, the device was in standby mode. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 07 01 00 00 00 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 40 00 00 00 01 00 00 00 00 00 01 a0 ff 23d+08:49:05.062 READ VERIFY SECTOR(S) 40 00 00 00 01 00 00 00 00 00 01 a0 ff 23d+08:48:57.447 READ VERIFY SECTOR(S) 40 00 00 00 01 00 00 00 00 00 01 a0 ff 23d+08:48:42.962 READ VERIFY SECTOR(S) 40 00 00 00 01 00 00 00 00 00 01 a0 ff 23d+08:48:42.632 READ VERIFY SECTOR(S) 40 00 00 00 01 00 00 00 00 00 01 a0 ff 23d+08:48:41.320 READ VERIFY SECTOR(S) Error 2 [1] occurred at disk power-on lifetime: 11179 hours (465 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 9c 00 00 59 bc 2b b4 00 00 Error: ICRC, ABRT 156 sectors at LBA = 0x59bc2bb4 = 1505504180 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 04 00 00 00 59 bc 28 50 e9 00 9d+11:56:59.927 WRITE DMA EXT 35 00 00 04 00 00 00 59 bc 24 50 e9 00 9d+11:56:59.913 WRITE DMA EXT 35 00 00 04 00 00 00 59 bc 20 50 e9 00 9d+11:56:59.898 WRITE DMA EXT 35 00 00 04 00 00 00 59 bc 1c 50 e9 00 9d+11:56:59.766 WRITE DMA EXT 35 00 00 04 00 00 00 59 bc 18 50 e9 00 9d+11:56:59.746 WRITE DMA EXT Error 1 [0] occurred at disk power-on lifetime: 3 hours (0 days + 3 hours) When the command that caused the error occurred, the device was in standby mode. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 02 -- 51 00 00 00 00 00 00 00 00 00 00 Error: TK0NF Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 10 03 00 01 00 00 00 01 00 00 00 a0 ff 18:50:10.522 RECALIBRATE [OBS-4] 10 03 00 01 00 00 00 01 00 00 00 a0 ff 18:50:08.504 RECALIBRATE [OBS-4] 10 03 00 01 00 00 00 01 00 00 00 a0 ff 18:50:06.169 RECALIBRATE [OBS-4] 10 03 00 01 00 00 00 01 00 00 00 a0 ff 18:50:04.151 RECALIBRATE [OBS-4] 10 03 00 01 00 00 00 01 00 00 00 e0 00 18:49:31.254 RECALIBRATE [OBS-4] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 53 Celsius Power Cycle Min/Max Temperature: 26/53 Celsius Lifetime Min/Max Temperature: 21/64 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (18) Index Estimated Time Temperature Celsius 19 2016-01-22 16:33 53 ********************************** ... ..(126 skipped). .. ********************************** 18 2016-01-22 18:40 53 ********************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 1) == 1 0x008 4 3590 Lifetime Power-On Resets 1 0x010 4 27484 Power-on Hours 1 0x018 6 28392898863 Logical Sectors Written 1 0x020 6 121140147 Number of Write Commands 1 0x028 6 2091667093216 Logical Sectors Read 1 0x030 6 417124639 Number of Read Commands 3 ===== = = == Rotating Media Statistics (rev 1) == 3 0x008 4 21746 Spindle Motor Power-on Hours 3 0x010 4 21746 Head Flying Hours 3 0x018 4 7789 Head Load Events 3 0x020 4 0 Number of Reallocated Logical Sectors 3 0x028 4 246 Read Recovery Attempts 3 0x030 4 0 Number of Mechanical Start Failures 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 1 Number of Reported Uncorrectable Errors 4 0x010 4 3329 Resets Between Cmd Acceptance and Completion 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 53 Current Temperature 5 0x010 1 51~ Average Short Term Temperature 5 0x018 1 52~ Average Long Term Temperature 5 0x020 1 64 Highest Temperature 5 0x028 1 21 Lowest Temperature 5 0x030 1 55~ Highest Average Short Term Temperature 5 0x038 1 0~ Lowest Average Short Term Temperature 5 0x040 1 52~ Highest Average Long Term Temperature 5 0x048 1 0~ Lowest Average Long Term Temperature 5 0x050 4 310 Time in Over-Temperature 5 0x058 1 60 Specified Maximum Operating Temperature 5 0x060 4 0 Time in Under-Temperature 5 0x068 1 0 Specified Minimum Operating Temperature 6 ===== = = == Transport Statistics (rev 1) == 6 0x008 4 37050 Number of Hardware Resets 6 0x010 4 16085 Number of ASR Events 6 0x018 4 1 Number of Interface CRC Errors |_ ~ normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS