/dev/sda smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-42-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD2500BEVS-60UST0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) Local Time is: Tue Mar 17 20:15:06 2020 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 9180) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 110) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 3 Spin_Up_Time PO---- 187 186 021 - 1641 4 Start_Stop_Count -O--CK 098 098 000 - 2418 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-- 100 253 051 - 0 9 Power_On_Hours -O--CK 097 097 000 - 2687 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2119 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 051 043 040 - 49 192 Power-Off_Retract_Count -O--CK 200 200 000 - 426 193 Load_Cycle_Count -O--CK 169 169 000 - 93990 194 Temperature_Celsius -O---K 098 090 000 - 49 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 100 253 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 100 253 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 12 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 90% 521 - # 2 Short offline Completed without error 00% 521 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 49 Celsius Power Cycle Min/Max Temperature: 46/49 Celsius Lifetime Min/Max Temperature: 45/57 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (43) Index Estimated Time Temperature Celsius 44 2020-03-17 18:08 46 *************************** ... ..( 6 skipped). .. *************************** 51 2020-03-17 18:15 46 *************************** 52 2020-03-17 18:16 47 **************************** ... ..( 3 skipped). .. **************************** 56 2020-03-17 18:20 47 **************************** 57 2020-03-17 18:21 48 ***************************** 58 2020-03-17 18:22 ? - 59 2020-03-17 18:23 48 ***************************** 60 2020-03-17 18:24 47 **************************** ... ..( 7 skipped). .. **************************** 68 2020-03-17 18:32 47 **************************** 69 2020-03-17 18:33 46 *************************** ... ..( 18 skipped). .. *************************** 88 2020-03-17 18:52 46 *************************** 89 2020-03-17 18:53 47 **************************** ... ..( 40 skipped). .. **************************** 2 2020-03-17 19:34 47 **************************** 3 2020-03-17 19:35 48 ***************************** ... ..( 3 skipped). .. ***************************** 7 2020-03-17 19:39 48 ***************************** 8 2020-03-17 19:40 49 ****************************** ... ..( 8 skipped). .. ****************************** 17 2020-03-17 19:49 49 ****************************** 18 2020-03-17 19:50 48 ***************************** ... ..( 18 skipped). .. ***************************** 37 2020-03-17 20:09 48 ***************************** 38 2020-03-17 20:10 49 ****************************** ... ..( 3 skipped). .. ****************************** 42 2020-03-17 20:14 49 ****************************** 43 2020-03-17 20:15 46 *************************** SCT Error Recovery Control: Read: 75 (7.5 seconds) Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x8000 4 6730 Vendor specific /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-42-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2AR10001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Mar 17 20:15:06 2020 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13200) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 220) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 0 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 086 086 025 - 4454 4 Start_Stop_Count -O--CK 100 100 000 - 505 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 3123 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 3 12 Power_Cycle_Count -O--CK 100 100 000 - 124 191 G-Sense_Error_Rate -O---K 100 100 000 - 2 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 060 000 - 33 (Min/Max 20/47) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 79 223 Load_Retry_Count -O--CK 100 100 000 - 3 225 Load_Cycle_Count -O--CK 098 098 000 - 25643 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 31/34 Celsius Lifetime Min/Max Temperature: 19/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (70) Index Estimated Time Temperature Celsius 71 2020-03-17 09:40 33 ************** 72 2020-03-17 09:45 30 *********** 73 2020-03-17 09:50 34 *************** 74 2020-03-17 09:55 36 ***************** 75 2020-03-17 10:00 37 ****************** 76 2020-03-17 10:05 27 ******** 77 2020-03-17 10:10 29 ********** 78 2020-03-17 10:15 33 ************** 79 2020-03-17 10:20 35 **************** 80 2020-03-17 10:25 36 ***************** 81 2020-03-17 10:30 37 ****************** 82 2020-03-17 10:35 37 ****************** 83 2020-03-17 10:40 37 ****************** 84 2020-03-17 10:45 32 ************* 85 2020-03-17 10:50 34 *************** 86 2020-03-17 10:55 35 **************** 87 2020-03-17 11:00 35 **************** 88 2020-03-17 11:05 35 **************** 89 2020-03-17 11:10 36 ***************** 90 2020-03-17 11:15 33 ************** 91 2020-03-17 11:20 34 *************** 92 2020-03-17 11:25 31 ************ 93 2020-03-17 11:30 32 ************* 94 2020-03-17 11:35 33 ************** 95 2020-03-17 11:40 35 **************** 96 2020-03-17 11:45 37 ****************** 97 2020-03-17 11:50 38 ******************* 98 2020-03-17 11:55 39 ******************** 99 2020-03-17 12:00 40 ********************* 100 2020-03-17 12:05 39 ******************** 101 2020-03-17 12:10 37 ****************** 102 2020-03-17 12:15 33 ************** 103 2020-03-17 12:20 35 **************** 104 2020-03-17 12:25 33 ************** 105 2020-03-17 12:30 24 ***** 106 2020-03-17 12:35 29 ********** 107 2020-03-17 12:40 31 ************ 108 2020-03-17 12:45 30 *********** 109 2020-03-17 12:50 29 ********** 110 2020-03-17 12:55 31 ************ 111 2020-03-17 13:00 31 ************ 112 2020-03-17 13:05 33 ************** 113 2020-03-17 13:10 36 ***************** 114 2020-03-17 13:15 37 ****************** 115 2020-03-17 13:20 39 ******************** 116 2020-03-17 13:25 39 ******************** 117 2020-03-17 13:30 40 ********************* 118 2020-03-17 13:35 32 ************* 119 2020-03-17 13:40 30 *********** 120 2020-03-17 13:45 30 *********** 121 2020-03-17 13:50 34 *************** 122 2020-03-17 13:55 24 ***** 123 2020-03-17 14:00 26 ******* 124 2020-03-17 14:05 27 ******** 125 2020-03-17 14:10 29 ********** 126 2020-03-17 14:15 28 ********* 127 2020-03-17 14:20 31 ************ 0 2020-03-17 14:25 39 ******************** ... ..( 2 skipped). .. ******************** 3 2020-03-17 14:40 39 ******************** 4 2020-03-17 14:45 27 ******** 5 2020-03-17 14:50 29 ********** 6 2020-03-17 14:55 31 ************ 7 2020-03-17 15:00 31 ************ 8 2020-03-17 15:05 32 ************* 9 2020-03-17 15:10 33 ************** 10 2020-03-17 15:15 32 ************* 11 2020-03-17 15:20 32 ************* 12 2020-03-17 15:25 33 ************** 13 2020-03-17 15:30 34 *************** 14 2020-03-17 15:35 34 *************** 15 2020-03-17 15:40 35 **************** 16 2020-03-17 15:45 35 **************** 17 2020-03-17 15:50 36 ***************** ... ..( 2 skipped). .. ***************** 20 2020-03-17 16:05 36 ***************** 21 2020-03-17 16:10 37 ****************** ... ..( 6 skipped). .. ****************** 28 2020-03-17 16:45 37 ****************** 29 2020-03-17 16:50 38 ******************* ... ..( 3 skipped). .. ******************* 33 2020-03-17 17:10 38 ******************* 34 2020-03-17 17:15 37 ****************** ... ..( 3 skipped). .. ****************** 38 2020-03-17 17:35 37 ****************** 39 2020-03-17 17:40 36 ***************** ... ..( 4 skipped). .. ***************** 44 2020-03-17 18:05 36 ***************** 45 2020-03-17 18:10 35 **************** 46 2020-03-17 18:15 34 *************** 47 2020-03-17 18:20 35 **************** ... ..( 3 skipped). .. **************** 51 2020-03-17 18:40 35 **************** 52 2020-03-17 18:45 36 ***************** 53 2020-03-17 18:50 36 ***************** 54 2020-03-17 18:55 35 **************** 55 2020-03-17 19:00 36 ***************** 56 2020-03-17 19:05 35 **************** ... ..( 4 skipped). .. **************** 61 2020-03-17 19:30 35 **************** 62 2020-03-17 19:35 38 ******************* 63 2020-03-17 19:40 41 ********************** 64 2020-03-17 19:45 44 ************************* 65 2020-03-17 19:50 46 *************************** 66 2020-03-17 19:55 33 ************** 67 2020-03-17 20:00 34 *************** 68 2020-03-17 20:05 33 ************** 69 2020-03-17 20:10 33 ************** 70 2020-03-17 20:15 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific