Probe #75dbf5b437 of ASUSTek ROG STRIX B760-I GAM... Desktop Computer

Log: smartctl

/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.5.0-41-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 EVO Plus 500GB Serial Number: -- Firmware Version: 2B2QEXM7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Utilization: 154,705,780,736 [154 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Tue Jul 16 15:41:10 2024 AWST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 85 Celsius Critical Comp. Temp. Threshold: 85 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 7.80W - - 0 0 0 0 0 0 1 + 6.00W - - 1 1 1 1 0 0 2 + 3.40W - - 2 2 2 2 0 0 3 - 0.0700W - - 3 3 3 3 210 1200 4 - 0.0100W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 37 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 346,840 [177 GB] Data Units Written: 388,582 [198 GB] Host Read Commands: 3,610,163 Host Write Commands: 168,919 Controller Busy Time: 2 Power Cycles: 685 Power On Hours: 5 Unsafe Shutdowns: 16 Media and Data Integrity Errors: 0 Error Information Log Entries: 882 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 37 Celsius Temperature Sensor 2: 28 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 882 0 0x601a 0x4004 - 0 0 - /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.5.0-41-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 860 EVO 500GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: RVT04B6Q User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jul 16 15:41:10 2024 AWST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1069 12 Power_Cycle_Count -O--CK 098 098 000 - 1215 177 Wear_Leveling_Count PO--C- 099 099 000 - 10 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 078 056 000 - 22 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 099 099 000 - 1 235 POR_Recovery_Count -O--C- 099 099 000 - 194 241 Total_LBAs_Written -O--CK 099 099 000 - 8003067001 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 22 Celsius Power Cycle Min/Max Temperature: 20/40 Celsius Lifetime Min/Max Temperature: 14/44 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (68) Index Estimated Time Temperature Celsius 69 2024-07-15 18:30 18 - 70 2024-07-15 18:40 ? - 71 2024-07-15 18:50 21 ** 72 2024-07-15 19:00 20 * 73 2024-07-15 19:10 ? - 74 2024-07-15 19:20 19 - 75 2024-07-15 19:30 19 - 76 2024-07-15 19:40 ? - 77 2024-07-15 19:50 18 - 78 2024-07-15 20:00 19 - ... ..( 2 skipped). .. - 81 2024-07-15 20:30 19 - 82 2024-07-15 20:40 21 ** 83 2024-07-15 20:50 20 * ... ..( 3 skipped). .. * 87 2024-07-15 21:30 20 * 88 2024-07-15 21:40 ? - 89 2024-07-15 21:50 ? - 90 2024-07-15 22:00 20 * ... ..( 2 skipped). .. * 93 2024-07-15 22:30 20 * 94 2024-07-15 22:40 ? - 95 2024-07-15 22:50 ? - 96 2024-07-15 23:00 20 * 97 2024-07-15 23:10 ? - 98 2024-07-15 23:20 19 - 99 2024-07-15 23:30 ? - 100 2024-07-15 23:40 ? - 101 2024-07-15 23:50 ? - 102 2024-07-16 00:00 20 * 103 2024-07-16 00:10 ? - 104 2024-07-16 00:20 21 ** 105 2024-07-16 00:30 ? - 106 2024-07-16 00:40 21 ** 107 2024-07-16 00:50 22 *** 108 2024-07-16 01:00 25 ****** 109 2024-07-16 01:10 ? - 110 2024-07-16 01:20 ? - 111 2024-07-16 01:30 18 - 112 2024-07-16 01:40 18 - 113 2024-07-16 01:50 ? - 114 2024-07-16 02:00 20 * 115 2024-07-16 02:10 20 * 116 2024-07-16 02:20 ? - 117 2024-07-16 02:30 18 - 118 2024-07-16 02:40 19 - 119 2024-07-16 02:50 19 - 120 2024-07-16 03:00 19 - 121 2024-07-16 03:10 20 * 122 2024-07-16 03:20 20 * 123 2024-07-16 03:30 20 * 124 2024-07-16 03:40 21 ** ... ..( 7 skipped). .. ** 4 2024-07-16 05:00 21 ** 5 2024-07-16 05:10 ? - 6 2024-07-16 05:20 ? - 7 2024-07-16 05:30 18 - 8 2024-07-16 05:40 ? - 9 2024-07-16 05:50 ? - 10 2024-07-16 06:00 ? - 11 2024-07-16 06:10 19 - 12 2024-07-16 06:20 20 * 13 2024-07-16 06:30 20 * 14 2024-07-16 06:40 21 ** 15 2024-07-16 06:50 24 ***** 16 2024-07-16 07:00 22 *** 17 2024-07-16 07:10 ? - 18 2024-07-16 07:20 ? - 19 2024-07-16 07:30 22 *** ... ..( 4 skipped). .. *** 24 2024-07-16 08:20 22 *** 25 2024-07-16 08:30 ? - 26 2024-07-16 08:40 22 *** 27 2024-07-16 08:50 ? - 28 2024-07-16 09:00 21 ** 29 2024-07-16 09:10 21 ** 30 2024-07-16 09:20 22 *** 31 2024-07-16 09:30 22 *** 32 2024-07-16 09:40 22 *** 33 2024-07-16 09:50 ? - 34 2024-07-16 10:00 19 - 35 2024-07-16 10:10 21 ** 36 2024-07-16 10:20 ? - 37 2024-07-16 10:30 ? - 38 2024-07-16 10:40 ? - 39 2024-07-16 10:50 18 - 40 2024-07-16 11:00 ? - 41 2024-07-16 11:10 20 * 42 2024-07-16 11:20 20 * 43 2024-07-16 11:30 21 ** 44 2024-07-16 11:40 ? - 45 2024-07-16 11:50 16 - 46 2024-07-16 12:00 19 - 47 2024-07-16 12:10 ? - 48 2024-07-16 12:20 18 - 49 2024-07-16 12:30 ? - 50 2024-07-16 12:40 18 - 51 2024-07-16 12:50 ? - 52 2024-07-16 13:00 19 - 53 2024-07-16 13:10 ? - 54 2024-07-16 13:20 20 * 55 2024-07-16 13:30 20 * 56 2024-07-16 13:40 ? - 57 2024-07-16 13:50 18 - 58 2024-07-16 14:00 ? - 59 2024-07-16 14:10 18 - 60 2024-07-16 14:20 19 - ... ..( 2 skipped). .. - 63 2024-07-16 14:50 19 - 64 2024-07-16 15:00 20 * 65 2024-07-16 15:10 21 ** 66 2024-07-16 15:20 ? - 67 2024-07-16 15:30 20 * 68 2024-07-16 15:40 21 ** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1215 --- Lifetime Power-On Resets 0x01 0x010 4 1069 --- Power-on Hours 0x01 0x018 6 8003067001 --- Logical Sectors Written 0x01 0x020 6 24355024 --- Number of Write Commands 0x01 0x028 6 10568291832 --- Logical Sectors Read 0x01 0x030 6 33543894 --- Number of Read Commands 0x01 0x038 6 1435000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 12413 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 22 --- Current Temperature 0x05 0x020 1 44 --- Highest Temperature 0x05 0x028 1 14 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 15660 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 1 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC


Hardware for Linux and BSD

GitHub