/dev/sda smartctl 7.1 2019-12-30 r5022 [i686-linux-4.15.0-desktop-122.124.1rosa-i586] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD800AAJS-00PSA0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 05.06H05 User Capacity: 80,025,280,000 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Fri Mar 5 14:21:03 2021 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 3 Spin_Up_Time PO---- 157 156 021 - 3116 4 Start_Stop_Count -O--CK 099 099 000 - 1547 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 097 097 000 - 2811 10 Spin_Retry_Count -O--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 1425 192 Power-Off_Retract_Count -O--CK 200 200 000 - 406 193 Load_Cycle_Count -O--CK 200 200 000 - 1549 194 Temperature_Celsius -O---K 116 098 000 - 27 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 31 200 Multi_Zone_Error_Rate ---R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 12 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 00 00 51 00 00 e1 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 d9 c8 00 96 00 00 00 00 00 00 00 01 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 c0 00 d9 01 96 c8 00 00 00 00:00:51.232 NOP [Abort queued commands] 01 d2 c8 00 96 00 20 00 98 00 00 00 01 00:00:38.616 [RESERVED] 00 20 00 00 e8 00 d2 01 96 c8 00 00 00 00:00:36.872 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 19/27 Celsius Lifetime Min/Max Temperature: 21/45 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: 1/85 Celsius Temperature History Size (Index): 128 (78) Index Estimated Time Temperature Celsius 79 2021-03-05 12:14 35 **************** ... ..( 7 skipped). .. **************** 87 2021-03-05 12:22 35 **************** 88 2021-03-05 12:23 ? - 89 2021-03-05 12:24 18 - 90 2021-03-05 12:25 19 - 91 2021-03-05 12:26 20 * 92 2021-03-05 12:27 21 ** 93 2021-03-05 12:28 23 **** 94 2021-03-05 12:29 23 **** 95 2021-03-05 12:30 25 ****** 96 2021-03-05 12:31 26 ******* 97 2021-03-05 12:32 27 ******** 98 2021-03-05 12:33 27 ******** 99 2021-03-05 12:34 28 ********* 100 2021-03-05 12:35 29 ********** 101 2021-03-05 12:36 30 *********** 102 2021-03-05 12:37 30 *********** 103 2021-03-05 12:38 30 *********** 104 2021-03-05 12:39 31 ************ 105 2021-03-05 12:40 31 ************ 106 2021-03-05 12:41 31 ************ 107 2021-03-05 12:42 32 ************* ... ..( 2 skipped). .. ************* 110 2021-03-05 12:45 32 ************* 111 2021-03-05 12:46 ? - 112 2021-03-05 12:47 30 *********** 113 2021-03-05 12:48 30 *********** 114 2021-03-05 12:49 30 *********** 115 2021-03-05 12:50 31 ************ ... ..( 3 skipped). .. ************ 119 2021-03-05 12:54 31 ************ 120 2021-03-05 12:55 32 ************* ... ..( 3 skipped). .. ************* 124 2021-03-05 12:59 32 ************* 125 2021-03-05 13:00 33 ************** ... ..( 13 skipped). .. ************** 11 2021-03-05 13:14 33 ************** 12 2021-03-05 13:15 34 *************** 13 2021-03-05 13:16 34 *************** 14 2021-03-05 13:17 34 *************** 15 2021-03-05 13:18 33 ************** ... ..( 2 skipped). .. ************** 18 2021-03-05 13:21 33 ************** 19 2021-03-05 13:22 34 *************** 20 2021-03-05 13:23 34 *************** 21 2021-03-05 13:24 34 *************** 22 2021-03-05 13:25 ? - 23 2021-03-05 13:26 18 - 24 2021-03-05 13:27 21 ** 25 2021-03-05 13:28 22 *** 26 2021-03-05 13:29 ? - 27 2021-03-05 13:30 24 ***** 28 2021-03-05 13:31 26 ******* 29 2021-03-05 13:32 27 ******** 30 2021-03-05 13:33 27 ******** 31 2021-03-05 13:34 28 ********* 32 2021-03-05 13:35 28 ********* 33 2021-03-05 13:36 29 ********** 34 2021-03-05 13:37 30 *********** 35 2021-03-05 13:38 30 *********** 36 2021-03-05 13:39 30 *********** 37 2021-03-05 13:40 31 ************ ... ..( 3 skipped). .. ************ 41 2021-03-05 13:44 31 ************ 42 2021-03-05 13:45 32 ************* ... ..( 5 skipped). .. ************* 48 2021-03-05 13:51 32 ************* 49 2021-03-05 13:52 33 ************** ... ..( 6 skipped). .. ************** 56 2021-03-05 13:59 33 ************** 57 2021-03-05 14:00 ? - 58 2021-03-05 14:01 19 - 59 2021-03-05 14:02 21 ** 60 2021-03-05 14:03 22 *** 61 2021-03-05 14:04 23 **** 62 2021-03-05 14:05 24 ***** 63 2021-03-05 14:06 25 ****** 64 2021-03-05 14:07 26 ******* 65 2021-03-05 14:08 27 ******** 66 2021-03-05 14:09 28 ********* 67 2021-03-05 14:10 29 ********** 68 2021-03-05 14:11 30 *********** 69 2021-03-05 14:12 ? - 70 2021-03-05 14:13 19 - 71 2021-03-05 14:14 21 ** 72 2021-03-05 14:15 22 *** 73 2021-03-05 14:16 23 **** 74 2021-03-05 14:17 24 ***** 75 2021-03-05 14:18 25 ****** 76 2021-03-05 14:19 26 ******* 77 2021-03-05 14:20 27 ******** 78 2021-03-05 14:21 35 **************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x8000 4 477 Vendor specific