/dev/nvme0n1 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.1-desktop-1omv2290] (OpenMandriva Lx 7.3-2) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: WDC WDS500G2B0C-00PXH0 Serial Number: -- Firmware Version: 211070WD PCI Vendor/Subsystem ID: 0x15b7 IEEE OUI Identifier: 0x001b44 Total NVM Capacity: 500,107,862,016 [500 GB] Unallocated NVM Capacity: 0 Controller ID: 1 NVMe Version: 1.4 Number of Namespaces: 1 Namespace 1 Size/Capacity: 500,107,862,016 [500 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 001b44 ... Local Time is: Mon Jan 9 11:41:16 2023 MSK Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x1e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg Pers_Ev_Lg Maximum Data Transfer Size: 128 Pages Warning Comp. Temp. Threshold: 80 Celsius Critical Comp. Temp. Threshold: 85 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 3.50W 2.10W - 0 0 0 0 0 0 1 + 2.40W 1.60W - 0 0 0 0 0 0 2 + 1.90W 1.50W - 0 0 0 0 0 0 3 - 0.0200W - - 3 3 3 3 3900 11000 4 - 0.0050W - - 4 4 4 4 5000 39000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 33 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 1% Data Units Read: 29,793,469 [15.2 TB] Data Units Written: 25,570,862 [13.0 TB] Host Read Commands: 133,586,514 Host Write Commands: 98,323,797 Controller Busy Time: 565 Power Cycles: 51 Power On Hours: 10,099 Unsafe Shutdowns: 12 Media and Data Integrity Errors: 0 Error Information Log Entries: 1 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged /dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.1-desktop-1omv2290] (OpenMandriva Lx 7.3-2) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD10EZEX-00BN5A0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Jan 9 11:41:16 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 120) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 173 169 021 - 2308 4 Start_Stop_Count -O--CK 095 095 000 - 5454 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 011 011 000 - 65221 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2079 192 Power-Off_Retract_Count -O--CK 200 200 000 - 290 193 Load_Cycle_Count -O--CK 199 199 000 - 5514 194 Temperature_Celsius -O---K 112 095 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 7 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 7 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 7 [6] occurred at disk power-on lifetime: 12940 hours (539 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 00 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 00 e0 00 00:54:38.977 SMART ENABLE OPERATIONS b0 00 da 00 00 00 00 00 c2 4f 00 e0 00 00:54:36.772 SMART RETURN STATUS b0 00 d8 00 00 00 00 00 c2 4f 00 e0 00 00:54:34.584 SMART ENABLE OPERATIONS ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:54:34.584 IDENTIFY DEVICE 60 00 01 00 28 00 00 00 00 00 00 40 00 00:54:34.584 READ FPDMA QUEUED Error 6 [5] occurred at disk power-on lifetime: 12940 hours (539 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 00 e0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 00 e0 00 00:54:34.584 SMART ENABLE OPERATIONS ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:54:34.584 IDENTIFY DEVICE 60 00 01 00 28 00 00 00 00 00 00 40 00 00:54:34.584 READ FPDMA QUEUED 60 00 01 00 20 00 00 00 00 00 00 40 00 00:54:34.569 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:54:34.569 SET FEATURES [Enable write cache] Error 5 [4] occurred at disk power-on lifetime: 12940 hours (539 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:53:06.027 FLUSH CACHE EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:53:06.027 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:53:06.027 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:53:06.026 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:53:06.026 SET FEATURES [Set transfer mode] Error 4 [3] occurred at disk power-on lifetime: 12940 hours (539 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:53:01.620 FLUSH CACHE EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 00:53:01.619 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:53:01.609 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:53:01.608 IDENTIFY DEVICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:53:01.608 SET FEATURES [Set transfer mode] Error 3 [2] occurred at disk power-on lifetime: 12940 hours (539 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 e0 08 00:52:55.040 FLUSH CACHE EXT b0 00 da 00 00 00 00 00 c2 4f 00 00 08 00:46:18.485 SMART RETURN STATUS b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 00:46:18.483 SMART READ DATA b0 00 d1 00 01 00 00 00 c2 4f 00 00 08 00:46:18.480 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] e5 00 00 00 00 00 00 00 00 00 00 00 08 00:46:18.479 CHECK POWER MODE Error 2 [1] occurred at disk power-on lifetime: 12939 hours (539 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 f8 00 00 00 c2 4f 00 00 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 db 00 f8 00 00 00 c2 4f 00 00 08 00:45:27.002 SMART EN/DISABLE AUTO OFFLINE [NS (SFF-8035i)] b0 00 d1 00 01 00 00 00 c2 4f 01 00 08 00:45:26.999 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] b0 00 d0 00 01 00 00 00 c2 4f 00 00 08 00:45:26.997 SMART READ DATA b0 00 da 00 00 00 00 00 c2 4f 00 00 08 00:45:24.791 SMART RETURN STATUS b0 00 d2 00 f1 00 00 00 c2 4f 00 00 08 00:45:22.611 SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE Error 1 [0] occurred at disk power-on lifetime: 12939 hours (539 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 61 00 00 00 00 00 c2 4f 01 00 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d8 00 00 00 00 00 c2 4f 01 00 08 00:45:20.411 SMART ENABLE OPERATIONS ec 00 00 00 01 00 00 00 00 00 00 00 08 00:45:20.401 IDENTIFY DEVICE ec 00 00 00 01 00 00 00 00 00 00 00 08 00:45:20.400 IDENTIFY DEVICE 60 00 08 00 90 00 00 74 70 6d a8 40 08 00:45:05.680 READ FPDMA QUEUED 60 00 08 00 88 00 00 74 70 67 a8 40 08 00:45:05.680 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 90% 43483 - # 2 Short offline Completed without error 00% 43481 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 26/43 Celsius Lifetime Min/Max Temperature: 15/48 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (212) Index Estimated Time Temperature Celsius 213 2023-01-09 03:44 30 *********** ... ..( 6 skipped). .. *********** 220 2023-01-09 03:51 30 *********** 221 2023-01-09 03:52 31 ************ ... ..(150 skipped). .. ************ 372 2023-01-09 06:23 31 ************ 373 2023-01-09 06:24 32 ************* 374 2023-01-09 06:25 ? - 375 2023-01-09 06:26 32 ************* 376 2023-01-09 06:27 32 ************* 377 2023-01-09 06:28 31 ************ ... ..( 46 skipped). .. ************ 424 2023-01-09 07:15 31 ************ 425 2023-01-09 07:16 30 *********** 426 2023-01-09 07:17 30 *********** 427 2023-01-09 07:18 29 ********** ... ..( 2 skipped). .. ********** 430 2023-01-09 07:21 29 ********** 431 2023-01-09 07:22 ? - 432 2023-01-09 07:23 29 ********** 433 2023-01-09 07:24 28 ********* ... ..( 5 skipped). .. ********* 439 2023-01-09 07:30 28 ********* 440 2023-01-09 07:31 29 ********** ... ..( 3 skipped). .. ********** 444 2023-01-09 07:35 29 ********** 445 2023-01-09 07:36 30 *********** 446 2023-01-09 07:37 30 *********** 447 2023-01-09 07:38 30 *********** 448 2023-01-09 07:39 31 ************ ... ..( 2 skipped). .. ************ 451 2023-01-09 07:42 31 ************ 452 2023-01-09 07:43 32 ************* 453 2023-01-09 07:44 32 ************* 454 2023-01-09 07:45 32 ************* 455 2023-01-09 07:46 33 ************** 456 2023-01-09 07:47 33 ************** 457 2023-01-09 07:48 33 ************** 458 2023-01-09 07:49 34 *************** ... ..( 2 skipped). .. *************** 461 2023-01-09 07:52 34 *************** 462 2023-01-09 07:53 35 **************** ... ..( 18 skipped). .. **************** 3 2023-01-09 08:12 35 **************** 4 2023-01-09 08:13 34 *************** ... ..( 6 skipped). .. *************** 11 2023-01-09 08:20 34 *************** 12 2023-01-09 08:21 33 ************** ... ..( 27 skipped). .. ************** 40 2023-01-09 08:49 33 ************** 41 2023-01-09 08:50 32 ************* ... ..( 70 skipped). .. ************* 112 2023-01-09 10:01 32 ************* 113 2023-01-09 10:02 33 ************** ... ..( 35 skipped). .. ************** 149 2023-01-09 10:38 33 ************** 150 2023-01-09 10:39 32 ************* ... ..( 39 skipped). .. ************* 190 2023-01-09 11:19 32 ************* 191 2023-01-09 11:20 31 ************ 192 2023-01-09 11:21 31 ************ 193 2023-01-09 11:22 30 *********** 194 2023-01-09 11:23 30 *********** 195 2023-01-09 11:24 30 *********** 196 2023-01-09 11:25 29 ********** 197 2023-01-09 11:26 29 ********** 198 2023-01-09 11:27 29 ********** 199 2023-01-09 11:28 ? - 200 2023-01-09 11:29 29 ********** 201 2023-01-09 11:30 28 ********* ... ..( 2 skipped). .. ********* 204 2023-01-09 11:33 28 ********* 205 2023-01-09 11:34 29 ********** ... ..( 3 skipped). .. ********** 209 2023-01-09 11:38 29 ********** 210 2023-01-09 11:39 30 *********** 211 2023-01-09 11:40 30 *********** 212 2023-01-09 11:41 30 *********** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 159 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 145 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 678636 Vendor specific /dev/sdb smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.1-desktop-1omv2290] (OpenMandriva Lx 7.3-2) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Samsung based SSDs Device Model: Samsung SSD 840 EVO 120GB Serial Number: -- LU WWN Device Id: 5 002538 ... Firmware Version: EXT0BB6Q User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Jan 9 11:41:16 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unexpected SCT status 0x0001 (action_code=4, function_code=2) Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 32) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 4200) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 70) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 086 086 000 - 67236 12 Power_Cycle_Count -O--CK 097 097 000 - 2111 177 Wear_Leveling_Count PO--C- 054 054 000 - 550 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 001 010 Past 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 072 043 000 - 28 195 ECC_Error_Rate -O-RC- 200 200 000 - 0 199 CRC_Error_Count -OSRCK 099 099 000 - 1 235 POR_Recovery_Count -O--C- 099 099 000 - 333 241 Total_LBAs_Written -O--CK 099 099 000 - 135087294307 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 16 Device vendor specific log 0xce GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 00% 81 - # 2 Short offline Completed without error 00% 79 - # 3 Short offline Completed without error 00% 0 - # 4 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/396044 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (108) Index Estimated Time Temperature Celsius 109 2023-01-08 14:30 44 ************************* 110 2023-01-08 14:40 43 ************************ 111 2023-01-08 14:50 42 *********************** 112 2023-01-08 15:00 42 *********************** 113 2023-01-08 15:10 39 ******************** 114 2023-01-08 15:20 43 ************************ 115 2023-01-08 15:30 38 ******************* 116 2023-01-08 15:40 31 ************ 117 2023-01-08 15:50 29 ********** 118 2023-01-08 16:00 28 ********* 119 2023-01-08 16:10 27 ******** 120 2023-01-08 16:20 28 ********* 121 2023-01-08 16:30 27 ******** 122 2023-01-08 16:40 27 ******** 123 2023-01-08 16:50 28 ********* 124 2023-01-08 17:00 32 ************* 125 2023-01-08 17:10 34 *************** 126 2023-01-08 17:20 31 ************ 127 2023-01-08 17:30 30 *********** 0 2023-01-08 17:40 33 ************** 1 2023-01-08 17:50 31 ************ 2 2023-01-08 18:00 32 ************* 3 2023-01-08 18:10 31 ************ 4 2023-01-08 18:20 31 ************ 5 2023-01-08 18:30 31 ************ 6 2023-01-08 18:40 30 *********** 7 2023-01-08 18:50 30 *********** 8 2023-01-08 19:00 30 *********** 9 2023-01-08 19:10 32 ************* 10 2023-01-08 19:20 37 ****************** 11 2023-01-08 19:30 38 ******************* 12 2023-01-08 19:40 40 ********************* 13 2023-01-08 19:50 40 ********************* 14 2023-01-08 20:00 40 ********************* 15 2023-01-08 20:10 38 ******************* 16 2023-01-08 20:20 40 ********************* 17 2023-01-08 20:30 42 *********************** ... ..( 2 skipped). .. *********************** 20 2023-01-08 21:00 42 *********************** 21 2023-01-08 21:10 36 ***************** 22 2023-01-08 21:20 38 ******************* 23 2023-01-08 21:30 42 *********************** 24 2023-01-08 21:40 42 *********************** 25 2023-01-08 21:50 43 ************************ 26 2023-01-08 22:00 43 ************************ 27 2023-01-08 22:10 41 ********************** 28 2023-01-08 22:20 41 ********************** 29 2023-01-08 22:30 42 *********************** 30 2023-01-08 22:40 43 ************************ ... ..( 2 skipped). .. ************************ 33 2023-01-08 23:10 43 ************************ 34 2023-01-08 23:20 42 *********************** 35 2023-01-08 23:30 42 *********************** 36 2023-01-08 23:40 43 ************************ 37 2023-01-08 23:50 42 *********************** 38 2023-01-09 00:00 42 *********************** 39 2023-01-09 00:10 42 *********************** 40 2023-01-09 00:20 40 ********************* 41 2023-01-09 00:30 35 **************** 42 2023-01-09 00:40 37 ****************** 43 2023-01-09 00:50 42 *********************** 44 2023-01-09 01:00 42 *********************** 45 2023-01-09 01:10 42 *********************** 46 2023-01-09 01:20 41 ********************** 47 2023-01-09 01:30 38 ******************* 48 2023-01-09 01:40 37 ****************** 49 2023-01-09 01:50 36 ***************** 50 2023-01-09 02:00 36 ***************** 51 2023-01-09 02:10 35 **************** 52 2023-01-09 02:20 36 ***************** 53 2023-01-09 02:30 35 **************** 54 2023-01-09 02:40 36 ***************** 55 2023-01-09 02:50 36 ***************** 56 2023-01-09 03:00 35 **************** ... ..( 5 skipped). .. **************** 62 2023-01-09 04:00 35 **************** 63 2023-01-09 04:10 36 ***************** 64 2023-01-09 04:20 35 **************** 65 2023-01-09 04:30 35 **************** 66 2023-01-09 04:40 35 **************** 67 2023-01-09 04:50 34 *************** 68 2023-01-09 05:00 35 **************** 69 2023-01-09 05:10 35 **************** 70 2023-01-09 05:20 30 *********** 71 2023-01-09 05:30 28 ********* 72 2023-01-09 05:40 27 ******** 73 2023-01-09 05:50 27 ******** 74 2023-01-09 06:00 32 ************* 75 2023-01-09 06:10 35 **************** 76 2023-01-09 06:20 40 ********************* 77 2023-01-09 06:30 43 ************************ 78 2023-01-09 06:40 42 *********************** 79 2023-01-09 06:50 37 ****************** 80 2023-01-09 07:00 37 ****************** 81 2023-01-09 07:10 37 ****************** 82 2023-01-09 07:20 36 ***************** 83 2023-01-09 07:30 32 ************* 84 2023-01-09 07:40 37 ****************** 85 2023-01-09 07:50 31 ************ 86 2023-01-09 08:00 31 ************ 87 2023-01-09 08:10 30 *********** 88 2023-01-09 08:20 32 ************* 89 2023-01-09 08:30 32 ************* 90 2023-01-09 08:40 32 ************* 91 2023-01-09 08:50 33 ************** 92 2023-01-09 09:00 31 ************ 93 2023-01-09 09:10 31 ************ 94 2023-01-09 09:20 36 ***************** ... ..( 2 skipped). .. ***************** 97 2023-01-09 09:50 36 ***************** 98 2023-01-09 10:00 35 **************** 99 2023-01-09 10:10 35 **************** 100 2023-01-09 10:20 36 ***************** 101 2023-01-09 10:30 35 **************** 102 2023-01-09 10:40 35 **************** 103 2023-01-09 10:50 36 ***************** 104 2023-01-09 11:00 36 ***************** 105 2023-01-09 11:10 31 ************ 106 2023-01-09 11:20 26 ******* 107 2023-01-09 11:30 26 ******* 108 2023-01-09 11:40 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 195 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 53 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.1-desktop-1omv2290] (OpenMandriva Lx 7.3-2) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Phison Driven SSDs Device Model: KINGSTON SA400S37240G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: SBFK62B3 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database ATA Version is: ACS-3 T13/2161-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Jan 9 11:41:16 2023 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (65535) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 952 12 Power_Cycle_Count -O--CK 100 100 000 - 10 148 Unknown_Attribute ------ 100 100 000 - 0 149 Unknown_Attribute ------ 100 100 000 - 0 167 Write_Protect_Mode ------ 100 100 000 - 0 168 SATA_Phy_Error_Count -O--C- 100 100 000 - 0 169 Bad_Block_Rate ------ 100 100 000 - 13 170 Bad_Blk_Ct_Erl/Lat ------ 100 100 010 - 0/20 172 Erase_Fail_Count -O--CK 100 100 000 - 0 173 MaxAvgErase_Ct ------ 100 100 000 - 8 (Average 6) 181 Program_Fail_Count -O--CK 100 100 000 - 0 182 Erase_Fail_Count ------ 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Unsafe_Shutdown_Count -O--C- 100 100 000 - 2 194 Temperature_Celsius -O---K 033 054 000 - 33 (Min/Max 21/54) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 199 SATA_CRC_Error_Count -O--CK 100 100 000 - 0 218 CRC_Error_Count -O--CK 100 100 000 - 0 231 SSD_Life_Left ------ 099 099 000 - 99 233 Flash_Writes_GiB -O--CK 100 100 000 - 1458 241 Lifetime_Writes_GiB -O--CK 100 100 000 - 1585 242 Lifetime_Reads_GiB -O--CK 100 100 000 - 503 244 Average_Erase_Count ------ 100 100 000 - 6 245 Max_Erase_Count ------ 100 100 000 - 8 246 Total_Erase_Count ------ 100 100 000 - 90016 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 10 --- Lifetime Power-On Resets 0x01 0x010 4 952 --- Power-on Hours 0x01 0x018 6 3324594678 --- Logical Sectors Written 0x01 0x028 6 1056240082 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x020 1 54 --- Highest Temperature 0x05 0x028 1 21 --- Lowest Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1558 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 193 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 229 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC