/dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.9.5-desktop-1omv2490] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Amegon AM500S 256GB Serial Number: -- LU WWN Device Id: 0 000000 ... Firmware Version: HP2818E3 User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available Device is: Not in smartctl database ATA Version is: ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jun 21 15:29:21 2024 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 050 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 050 - 388 12 Power_Cycle_Count -O--CK 100 100 050 - 237 160 Unknown_Attribute -O--CK 100 100 050 - 0 161 Unknown_Attribute -O--CK 100 100 050 - 100 163 Unknown_Attribute -O--CK 100 100 050 - 104 164 Unknown_Attribute -O--CK 100 100 050 - 5 165 Unknown_Attribute -O--CK 100 100 050 - 10 166 Unknown_Attribute -O--CK 100 100 050 - 1 167 Unknown_Attribute -O--CK 100 100 050 - 4 168 Unknown_Attribute -O--CK 100 100 050 - 0 169 Unknown_Attribute -O--CK 100 100 050 - 100 175 Program_Fail_Count_Chip -O--CK 100 100 050 - 0 176 Erase_Fail_Count_Chip -O--CK 100 100 050 - 334 177 Wear_Leveling_Count -O--CK 100 100 050 - 92450 181 Program_Fail_Cnt_Total -O--CK 100 100 050 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 050 - 0 192 Power-Off_Retract_Count -O--CK 100 100 050 - 5 194 Temperature_Celsius -O--CK 100 100 050 - 44 195 Hardware_ECC_Recovered -O--CK 100 100 050 - 0 196 Reallocated_Event_Count -O--CK 100 100 050 - 0 197 Current_Pending_Sector -O--CK 100 100 050 - 0 198 Offline_Uncorrectable -O--CK 100 100 050 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 050 - 0 232 Available_Reservd_Space -O--CK 100 100 050 - 100 241 Total_LBAs_Written -O--CK 100 100 050 - 9831 242 Total_LBAs_Read -O--CK 100 100 050 - 10638 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 1 Comprehensive SMART error log 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 5527 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5527 [2] occurred at disk power-on lifetime: 388 hours (16 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- a0 00 01 00 00 00 00 00 25 51 00 Device Fault Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 02 00 00 01 00 00 00 00 00 25 a0 00 00:08:23.880 READ LOG EXT ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:08:23.880 SET FEATURES [Enable write cache] f5 66 00 00 00 00 00 00 00 00 00 a0 00 00:08:23.880 SECURITY FREEZE LOCK ef 00 66 00 00 00 00 00 00 00 00 a0 00 00:08:23.880 SET FEATURES [Disable revert defaults] f5 00 00 08 00 00 00 00 00 00 00 a0 00 00:08:23.880 SECURITY FREEZE LOCK Error 5526 [1] occurred at disk power-on lifetime: 388 hours (16 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- a0 00 01 00 00 00 00 00 25 51 00 Device Fault Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 02 00 00 01 00 00 00 00 00 25 a0 00 00:00:29.710 READ LOG EXT ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:29.700 SET FEATURES [Enable write cache] f5 66 00 00 00 00 00 00 00 00 00 a0 00 00:00:29.700 SECURITY FREEZE LOCK ef 00 66 00 00 00 00 00 00 00 00 a0 00 00:00:29.700 SET FEATURES [Disable revert defaults] f5 00 00 08 00 00 00 00 00 00 00 a0 00 00:00:29.700 SECURITY FREEZE LOCK Error 5525 [0] occurred at disk power-on lifetime: 388 hours (16 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- a0 00 01 00 00 00 00 00 25 51 00 Device Fault Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 02 00 00 01 00 00 00 00 00 25 a0 00 04:01:02.270 READ LOG EXT ef 00 02 00 00 00 00 00 00 00 00 a0 00 04:01:02.270 SET FEATURES [Enable write cache] f5 66 00 00 00 00 00 00 00 00 00 a0 00 04:01:02.270 SECURITY FREEZE LOCK ef 00 66 00 00 00 00 00 00 00 00 a0 00 04:01:02.260 SET FEATURES [Disable revert defaults] f5 00 00 08 00 00 00 00 00 00 00 a0 00 04:01:02.260 SECURITY FREEZE LOCK Error 5524 [3] occurred at disk power-on lifetime: 387 hours (16 days + 3 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- a0 00 01 00 00 00 00 00 25 51 00 Device Fault Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 02 00 00 01 00 00 00 00 00 25 a0 00 03:43:49.150 READ LOG EXT ef 00 02 00 00 00 00 00 00 00 00 a0 00 03:43:49.150 SET FEATURES [Enable write cache] f5 66 00 00 00 00 00 00 00 00 00 a0 00 03:43:49.150 SECURITY FREEZE LOCK ef 00 66 00 00 00 00 00 00 00 00 a0 00 03:43:49.150 SET FEATURES [Disable revert defaults] f5 00 00 08 00 00 00 00 00 00 00 a0 00 03:43:49.150 SECURITY FREEZE LOCK SMART Extended Self-test Log Version: 0 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 237 --- Lifetime Power-On Resets 0x01 0x010 4 388 --- Power-on Hours 0x01 0x018 6 644284416 --- Logical Sectors Written 0x01 0x020 6 7006144 --- Number of Write Commands 0x01 0x028 6 697171968 --- Logical Sectors Read 0x01 0x030 6 10395136 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 237 --- Lifetime Power-On Resets 0x01 0x010 4 388 --- Power-on Hours 0x01 0x018 6 644284416 --- Logical Sectors Written 0x01 0x020 6 7006144 --- Number of Write Commands 0x01 0x028 6 697171968 --- Logical Sectors Read 0x01 0x030 6 10395136 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 237 --- Lifetime Power-On Resets 0x01 0x010 4 388 --- Power-on Hours 0x01 0x018 6 644284416 --- Logical Sectors Written 0x01 0x020 6 7006144 --- Number of Write Commands 0x01 0x028 6 697171968 --- Logical Sectors Read 0x01 0x030 6 10395136 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 237 --- Lifetime Power-On Resets 0x01 0x010 4 388 --- Power-on Hours 0x01 0x018 6 644284416 --- Logical Sectors Written 0x01 0x020 6 7006144 --- Number of Write Commands 0x01 0x028 6 697171968 --- Logical Sectors Read 0x01 0x030 6 10395136 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 237 --- Lifetime Power-On Resets 0x01 0x010 4 388 --- Power-on Hours 0x01 0x018 6 644284416 --- Logical Sectors Written 0x01 0x020 6 7006144 --- Number of Write Commands 0x01 0x028 6 697171968 --- Logical Sectors Read 0x01 0x030 6 10395136 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 237 --- Lifetime Power-On Resets 0x01 0x010 4 388 --- Power-on Hours 0x01 0x018 6 644284416 --- Logical Sectors Written 0x01 0x020 6 7006144 --- Number of Write Commands 0x01 0x028 6 697171968 --- Logical Sectors Read 0x01 0x030 6 10395136 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 237 --- Lifetime Power-On Resets 0x01 0x010 4 388 --- Power-on Hours 0x01 0x018 6 644284416 --- Logical Sectors Written 0x01 0x020 6 7006144 --- Number of Write Commands 0x01 0x028 6 697171968 --- Logical Sectors Read 0x01 0x030 6 10395136 --- Number of Read Commands 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 237 --- Lifetime Power-On Resets 0x01 0x010 4 388 --- Power-on Hours 0x01 0x018 6 644284416 --- Logical Sectors Written 0x01 0x020 6 7006144 --- Number of Write Commands 0x01 0x028 6 697171968 --- Logical Sectors Read 0x01 0x030 6 10395136 --- Number of Read Commands |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0009 4 815 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 801 Device-to-host register FISes sent due to a COMRESET 0x000b 4 5281 CRC errors within host-to-device FIS 0x000d 4 5281 Non-CRC errors within host-to-device FIS /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.9.5-desktop-1omv2490] (OpenMandriva Lx 7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE Serial ATA Device Model: WDC WD2500JS-75NCB3 Serial Number: -- Firmware Version: 10.02E04 User Capacity: 250,000,000,000 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Fri Jun 21 15:29:21 2024 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 90) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 1 3 Spin_Up_Time PO---- 187 182 021 - 5641 4 Start_Stop_Count -O--CK 095 095 000 - 5493 5 Reallocated_Sector_Ct PO--CK 199 199 140 - 3 7 Seek_Error_Rate POSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 034 034 000 - 48792 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 3570 190 Airflow_Temperature_Cel -O---K 056 047 045 - 44 194 Temperature_Celsius -O---K 106 097 000 - 44 196 Reallocated_Event_Count -O--CK 199 199 000 - 1 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 14 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 14 [13] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 b3 25 00 6c 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 38 00 5b 00 65 25 00 00 00 00:00:14.344 NOP [Abort queued commands] 00 5b 25 00 65 00 08 00 30 00 00 00 00 00:00:25.947 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 20 00 5b 00 65 25 00 00 00 00:00:10.248 NOP [Abort queued commands] Error 13 [12] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 08 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 5b 25 00 65 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 30 00 5b 00 65 25 00 00 00 00:00:14.344 NOP [Abort queued commands] 00 5b 25 00 65 00 08 00 28 00 00 00 00 00:00:25.947 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 18 00 5b 00 65 25 00 00 00 00:00:08.200 NOP [Abort queued commands] Error 12 [11] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 ff 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 f6 42 07 d6 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 ff 00 00 ae 07 f5 03 d6 42 00 00 00 00:00:44.543 NOP [Abort queued commands] 03 f0 42 07 d6 00 ff 00 af 00 00 00 03 00:08:33.778 CFA REQUEST EXTENDED ERROR 00 ff 00 00 b1 07 ee 03 d6 42 00 00 00 00:00:45.311 NOP [Abort queued commands] Error 11 [10] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 ff 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 44 42 07 cd 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 ff 00 00 b6 07 42 03 cd 42 00 00 00 00:00:46.591 NOP [Abort queued commands] 03 3f 42 07 cd 00 ff 00 b7 00 00 00 03 00:08:31.297 CFA REQUEST EXTENDED ERROR 00 ff 00 00 b9 07 3c 03 cd 42 00 00 00 00:00:47.359 NOP [Abort queued commands] Error 10 [9] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 ff 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 40 42 07 bf 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 ff 00 00 fd 07 3e 03 bf 42 00 00 00 00:01:04.767 NOP [Abort queued commands] 03 3a 42 07 bf 00 ff 00 fe 00 00 00 03 00:08:27.708 CFA REQUEST EXTENDED ERROR 00 ff 00 00 00 07 38 03 bf 42 00 00 00 00:01:05.535 NOP [Abort queued commands] Error 9 [8] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 40 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 5c 24 11 92 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 18 00 00 17 11 57 00 92 34 00 00 00 00:00:26.432 NOP [Abort queued commands] 00 52 34 11 92 00 10 00 a7 00 00 00 00 00:19:11.571 NOP [Reserved subcommand] [OBS-ACS-2] 00 08 00 00 f7 11 50 00 92 34 00 00 00 00:01:05.284 NOP [Abort queued commands] Error 8 [7] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 40 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 c4 24 11 8a 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 18 00 00 57 11 c0 03 8a 24 00 00 00 00:00:26.432 NOP [Abort queued commands] 03 a3 24 11 8a 00 40 00 af 00 00 00 03 00:19:09.622 CFA REQUEST EXTENDED ERROR 00 40 00 00 7f 11 8c 03 8a 24 00 00 00 00:00:59.200 NOP [Abort queued commands] Error 7 [6] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 00 01 40 00 51 00 00 e0 01 00 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 00 6a 24 11 03 00 00 00 00 00 00 00 03 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 30 00 00 5f 11 62 00 03 34 00 00 00 00:00:26.432 NOP [Abort queued commands] 00 4c c6 11 03 00 80 00 b7 00 00 00 00 00:18:34.957 NOP [Reserved subcommand] [OBS-ACS-2] 00 40 00 00 67 10 c9 03 fb 24 00 00 00 00:00:34.816 NOP [Abort queued commands] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 42 Celsius Power Cycle Min/Max Temperature: --/44 Celsius Lifetime Min/Max Temperature: --/53 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/65 Celsius Min/Max Temperature Limit: 1/70 Celsius Temperature History Size (Index): 128 (112) Index Estimated Time Temperature Celsius 113 2024-06-21 13:22 42 *********************** ... ..( 12 skipped). .. *********************** 126 2024-06-21 13:35 42 *********************** 127 2024-06-21 13:36 ? - 0 2024-06-21 13:37 42 *********************** 1 2024-06-21 13:38 41 ********************** 2 2024-06-21 13:39 40 ********************* ... ..( 6 skipped). .. ********************* 9 2024-06-21 13:46 40 ********************* 10 2024-06-21 13:47 41 ********************** 11 2024-06-21 13:48 42 *********************** ... ..( 16 skipped). .. *********************** 28 2024-06-21 14:05 42 *********************** 29 2024-06-21 14:06 ? - 30 2024-06-21 14:07 42 *********************** 31 2024-06-21 14:08 39 ******************** 32 2024-06-21 14:09 36 ***************** 33 2024-06-21 14:10 34 *************** 34 2024-06-21 14:11 34 *************** 35 2024-06-21 14:12 35 **************** 36 2024-06-21 14:13 37 ****************** 37 2024-06-21 14:14 37 ****************** 38 2024-06-21 14:15 36 ***************** 39 2024-06-21 14:16 35 **************** 40 2024-06-21 14:17 36 ***************** 41 2024-06-21 14:18 37 ****************** 42 2024-06-21 14:19 38 ******************* 43 2024-06-21 14:20 40 ********************* 44 2024-06-21 14:21 39 ******************** 45 2024-06-21 14:22 38 ******************* ... ..( 2 skipped). .. ******************* 48 2024-06-21 14:25 38 ******************* 49 2024-06-21 14:26 37 ****************** ... ..( 2 skipped). .. ****************** 52 2024-06-21 14:29 37 ****************** 53 2024-06-21 14:30 36 ***************** 54 2024-06-21 14:31 38 ******************* 55 2024-06-21 14:32 37 ****************** 56 2024-06-21 14:33 37 ****************** 57 2024-06-21 14:34 36 ***************** 58 2024-06-21 14:35 37 ****************** 59 2024-06-21 14:36 38 ******************* 60 2024-06-21 14:37 39 ******************** 61 2024-06-21 14:38 38 ******************* 62 2024-06-21 14:39 37 ****************** 63 2024-06-21 14:40 36 ***************** ... ..( 3 skipped). .. ***************** 67 2024-06-21 14:44 36 ***************** 68 2024-06-21 14:45 38 ******************* 69 2024-06-21 14:46 40 ********************* 70 2024-06-21 14:47 42 *********************** ... ..( 7 skipped). .. *********************** 78 2024-06-21 14:55 42 *********************** 79 2024-06-21 14:56 43 ************************ 80 2024-06-21 14:57 43 ************************ 81 2024-06-21 14:58 43 ************************ 82 2024-06-21 14:59 42 *********************** ... ..( 9 skipped). .. *********************** 92 2024-06-21 15:09 42 *********************** 93 2024-06-21 15:10 ? - 94 2024-06-21 15:11 41 ********************** 95 2024-06-21 15:12 42 *********************** 96 2024-06-21 15:13 44 ************************* ... ..( 14 skipped). .. ************************* 111 2024-06-21 15:28 44 ************************* 112 2024-06-21 15:29 42 *********************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x8000 4 1699 Vendor specific