Probe #5e6a1d1926 of Gigabyte P55-USB3 Desktop Computer

Log: smartctl

/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.13.9-200.fc34.x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD20EZRZ-00Z5HB0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Aug 18 23:31:06 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (26760) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 270) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 177 169 021 - 4125 4 Start_Stop_Count -O--CK 100 100 000 - 214 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 038 038 000 - 45609 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 212 192 Power-Off_Retract_Count -O--CK 200 200 000 - 167 193 Load_Cycle_Count -O--CK 001 001 000 - 3868081 194 Temperature_Celsius -O---K 116 106 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 39 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 30/33 Celsius Lifetime Min/Max Temperature: 6/41 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (30) Index Estimated Time Temperature Celsius 31 2021-08-18 15:34 31 ************ ... ..( 13 skipped). .. ************ 45 2021-08-18 15:48 31 ************ 46 2021-08-18 15:49 30 *********** 47 2021-08-18 15:50 31 ************ 48 2021-08-18 15:51 30 *********** 49 2021-08-18 15:52 31 ************ ... ..( 2 skipped). .. ************ 52 2021-08-18 15:55 31 ************ 53 2021-08-18 15:56 30 *********** 54 2021-08-18 15:57 31 ************ 55 2021-08-18 15:58 30 *********** 56 2021-08-18 15:59 31 ************ 57 2021-08-18 16:00 30 *********** 58 2021-08-18 16:01 30 *********** 59 2021-08-18 16:02 31 ************ 60 2021-08-18 16:03 31 ************ 61 2021-08-18 16:04 30 *********** 62 2021-08-18 16:05 31 ************ ... ..( 3 skipped). .. ************ 66 2021-08-18 16:09 31 ************ 67 2021-08-18 16:10 30 *********** 68 2021-08-18 16:11 30 *********** 69 2021-08-18 16:12 31 ************ 70 2021-08-18 16:13 30 *********** ... ..( 9 skipped). .. *********** 80 2021-08-18 16:23 30 *********** 81 2021-08-18 16:24 31 ************ 82 2021-08-18 16:25 31 ************ 83 2021-08-18 16:26 31 ************ 84 2021-08-18 16:27 30 *********** 85 2021-08-18 16:28 31 ************ 86 2021-08-18 16:29 30 *********** 87 2021-08-18 16:30 30 *********** 88 2021-08-18 16:31 31 ************ 89 2021-08-18 16:32 30 *********** 90 2021-08-18 16:33 31 ************ 91 2021-08-18 16:34 31 ************ 92 2021-08-18 16:35 30 *********** 93 2021-08-18 16:36 30 *********** 94 2021-08-18 16:37 30 *********** 95 2021-08-18 16:38 31 ************ 96 2021-08-18 16:39 31 ************ 97 2021-08-18 16:40 31 ************ 98 2021-08-18 16:41 30 *********** 99 2021-08-18 16:42 31 ************ 100 2021-08-18 16:43 30 *********** ... ..( 6 skipped). .. *********** 107 2021-08-18 16:50 30 *********** 108 2021-08-18 16:51 31 ************ 109 2021-08-18 16:52 31 ************ 110 2021-08-18 16:53 30 *********** 111 2021-08-18 16:54 31 ************ 112 2021-08-18 16:55 30 *********** 113 2021-08-18 16:56 30 *********** 114 2021-08-18 16:57 30 *********** 115 2021-08-18 16:58 31 ************ 116 2021-08-18 16:59 31 ************ 117 2021-08-18 17:00 31 ************ 118 2021-08-18 17:01 30 *********** ... ..( 29 skipped). .. *********** 148 2021-08-18 17:31 30 *********** 149 2021-08-18 17:32 31 ************ 150 2021-08-18 17:33 30 *********** 151 2021-08-18 17:34 31 ************ ... ..( 36 skipped). .. ************ 188 2021-08-18 18:11 31 ************ 189 2021-08-18 18:12 30 *********** 190 2021-08-18 18:13 31 ************ ... ..( 2 skipped). .. ************ 193 2021-08-18 18:16 31 ************ 194 2021-08-18 18:17 30 *********** 195 2021-08-18 18:18 31 ************ ... ..( 10 skipped). .. ************ 206 2021-08-18 18:29 31 ************ 207 2021-08-18 18:30 30 *********** 208 2021-08-18 18:31 31 ************ ... ..( 7 skipped). .. ************ 216 2021-08-18 18:39 31 ************ 217 2021-08-18 18:40 30 *********** 218 2021-08-18 18:41 30 *********** 219 2021-08-18 18:42 31 ************ 220 2021-08-18 18:43 31 ************ 221 2021-08-18 18:44 31 ************ 222 2021-08-18 18:45 30 *********** ... ..( 28 skipped). .. *********** 251 2021-08-18 19:14 30 *********** 252 2021-08-18 19:15 31 ************ 253 2021-08-18 19:16 30 *********** ... ..( 59 skipped). .. *********** 313 2021-08-18 20:16 30 *********** 314 2021-08-18 20:17 31 ************ 315 2021-08-18 20:18 30 *********** 316 2021-08-18 20:19 31 ************ 317 2021-08-18 20:20 30 *********** 318 2021-08-18 20:21 31 ************ ... ..( 5 skipped). .. ************ 324 2021-08-18 20:27 31 ************ 325 2021-08-18 20:28 30 *********** 326 2021-08-18 20:29 31 ************ ... ..( 5 skipped). .. ************ 332 2021-08-18 20:35 31 ************ 333 2021-08-18 20:36 30 *********** 334 2021-08-18 20:37 31 ************ 335 2021-08-18 20:38 31 ************ 336 2021-08-18 20:39 31 ************ 337 2021-08-18 20:40 30 *********** 338 2021-08-18 20:41 31 ************ ... ..( 56 skipped). .. ************ 395 2021-08-18 21:38 31 ************ 396 2021-08-18 21:39 30 *********** 397 2021-08-18 21:40 31 ************ 398 2021-08-18 21:41 30 *********** 399 2021-08-18 21:42 30 *********** 400 2021-08-18 21:43 31 ************ 401 2021-08-18 21:44 30 *********** 402 2021-08-18 21:45 30 *********** 403 2021-08-18 21:46 30 *********** 404 2021-08-18 21:47 31 ************ 405 2021-08-18 21:48 30 *********** 406 2021-08-18 21:49 31 ************ 407 2021-08-18 21:50 30 *********** 408 2021-08-18 21:51 31 ************ 409 2021-08-18 21:52 30 *********** 410 2021-08-18 21:53 31 ************ 411 2021-08-18 21:54 30 *********** 412 2021-08-18 21:55 31 ************ 413 2021-08-18 21:56 30 *********** 414 2021-08-18 21:57 31 ************ 415 2021-08-18 21:58 30 *********** 416 2021-08-18 21:59 31 ************ ... ..( 6 skipped). .. ************ 423 2021-08-18 22:06 31 ************ 424 2021-08-18 22:07 30 *********** 425 2021-08-18 22:08 31 ************ ... ..( 47 skipped). .. ************ 473 2021-08-18 22:56 31 ************ 474 2021-08-18 22:57 30 *********** ... ..( 9 skipped). .. *********** 6 2021-08-18 23:07 30 *********** 7 2021-08-18 23:08 31 ************ 8 2021-08-18 23:09 31 ************ 9 2021-08-18 23:10 31 ************ 10 2021-08-18 23:11 30 *********** 11 2021-08-18 23:12 30 *********** 12 2021-08-18 23:13 30 *********** 13 2021-08-18 23:14 31 ************ ... ..( 2 skipped). .. ************ 16 2021-08-18 23:17 31 ************ 17 2021-08-18 23:18 30 *********** 18 2021-08-18 23:19 31 ************ 19 2021-08-18 23:20 31 ************ 20 2021-08-18 23:21 30 *********** 21 2021-08-18 23:22 30 *********** 22 2021-08-18 23:23 31 ************ ... ..( 7 skipped). .. ************ 30 2021-08-18 23:31 31 ************ SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 389496 Vendor specific /dev/sdb smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.13.9-200.fc34.x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: KINGSTON SH103S3240G Serial Number: -- LU WWN Device Id: 5 0026b7 ... Firmware Version: 521ABBF0 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Aug 18 23:31:06 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Disabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 1) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO--CK 120 120 050 - 0/0 5 Retired_Block_Count PO--CK 100 100 003 - 0 9 Power_On_Hours_and_Msec -O--CK 025 025 000 - 65756h+46m+06.900s 12 Power_Cycle_Count -O--CK 100 100 000 - 445 171 Program_Fail_Count -O-R-- 000 000 000 - 0 172 Erase_Fail_Count -O--CK 000 000 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 365 177 Wear_Range_Delta ------ 000 000 000 - 1 181 Program_Fail_Count -O-R-- 000 000 000 - 0 182 Erase_Fail_Count -O--CK 000 000 000 - 0 187 Reported_Uncorrect -O--C- 100 100 000 - 0 189 Airflow_Temperature_Cel ------ 028 040 000 - 28 (Min/Max 6/40) 194 Temperature_Celsius -O---K 028 040 000 - 28 (Min/Max 6/40) 195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/0 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/0 204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/0 230 Life_Curve_Status PO--C- 100 100 000 - 100 231 SSD_Life_Left PO--C- 100 100 010 - 0 233 SandForce_Internal -O--CK 000 000 000 - 1130 234 SandForce_Internal -O--CK 000 000 000 - 341 241 Lifetime_Writes_GiB -O--CK 000 000 000 - 341 242 Lifetime_Reads_GiB -O--CK 000 000 000 - 213 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 1 Device Statistics log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 127/-127 Celsius Lifetime Min/Max Temperature: 6/-127 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/85 Celsius Temperature History Size (Index): 478 (207) Index Estimated Time Temperature Celsius 208 2021-08-15 16:00 30 *********** ... ..( 13 skipped). .. *********** 222 2021-08-15 18:20 30 *********** 223 2021-08-15 18:30 31 ************ 224 2021-08-15 18:40 30 *********** ... ..( 13 skipped). .. *********** 238 2021-08-15 21:00 30 *********** 239 2021-08-15 21:10 29 ********** ... ..( 12 skipped). .. ********** 252 2021-08-15 23:20 29 ********** 253 2021-08-15 23:30 30 *********** ... ..( 2 skipped). .. *********** 256 2021-08-16 00:00 30 *********** 257 2021-08-16 00:10 29 ********** ... ..( 28 skipped). .. ********** 286 2021-08-16 05:00 29 ********** 287 2021-08-16 05:10 28 ********* 288 2021-08-16 05:20 29 ********** 289 2021-08-16 05:30 29 ********** 290 2021-08-16 05:40 29 ********** 291 2021-08-16 05:50 28 ********* 292 2021-08-16 06:00 28 ********* 293 2021-08-16 06:10 28 ********* 294 2021-08-16 06:20 29 ********** 295 2021-08-16 06:30 28 ********* 296 2021-08-16 06:40 29 ********** 297 2021-08-16 06:50 28 ********* 298 2021-08-16 07:00 29 ********** 299 2021-08-16 07:10 28 ********* 300 2021-08-16 07:20 28 ********* 301 2021-08-16 07:30 29 ********** 302 2021-08-16 07:40 29 ********** 303 2021-08-16 07:50 28 ********* ... ..( 19 skipped). .. ********* 323 2021-08-16 11:10 28 ********* 324 2021-08-16 11:20 29 ********** ... ..( 2 skipped). .. ********** 327 2021-08-16 11:50 29 ********** 328 2021-08-16 12:00 28 ********* ... ..( 4 skipped). .. ********* 333 2021-08-16 12:50 28 ********* 334 2021-08-16 13:00 29 ********** ... ..( 4 skipped). .. ********** 339 2021-08-16 13:50 29 ********** 340 2021-08-16 14:00 28 ********* ... ..( 17 skipped). .. ********* 358 2021-08-16 17:00 28 ********* 359 2021-08-16 17:10 29 ********** ... ..( 11 skipped). .. ********** 371 2021-08-16 19:10 29 ********** 372 2021-08-16 19:20 28 ********* 373 2021-08-16 19:30 28 ********* 374 2021-08-16 19:40 28 ********* 375 2021-08-16 19:50 29 ********** 376 2021-08-16 20:00 28 ********* ... ..( 3 skipped). .. ********* 380 2021-08-16 20:40 28 ********* 381 2021-08-16 20:50 29 ********** 382 2021-08-16 21:00 28 ********* ... ..( 3 skipped). .. ********* 386 2021-08-16 21:40 28 ********* 387 2021-08-16 21:50 29 ********** 388 2021-08-16 22:00 28 ********* ... ..( 42 skipped). .. ********* 431 2021-08-17 05:10 28 ********* 432 2021-08-17 05:20 27 ******** 433 2021-08-17 05:30 28 ********* 434 2021-08-17 05:40 28 ********* 435 2021-08-17 05:50 27 ******** 436 2021-08-17 06:00 28 ********* 437 2021-08-17 06:10 27 ******** ... ..( 4 skipped). .. ******** 442 2021-08-17 07:00 27 ******** 443 2021-08-17 07:10 28 ********* 444 2021-08-17 07:20 27 ******** ... ..( 8 skipped). .. ******** 453 2021-08-17 08:50 27 ******** 454 2021-08-17 09:00 28 ********* 455 2021-08-17 09:10 28 ********* 456 2021-08-17 09:20 28 ********* 457 2021-08-17 09:30 27 ******** ... ..( 8 skipped). .. ******** 466 2021-08-17 11:00 27 ******** 467 2021-08-17 11:10 28 ********* ... ..( 2 skipped). .. ********* 470 2021-08-17 11:40 28 ********* 471 2021-08-17 11:50 27 ******** 472 2021-08-17 12:00 27 ******** 473 2021-08-17 12:10 27 ******** 474 2021-08-17 12:20 28 ********* ... ..( 3 skipped). .. ********* 0 2021-08-17 13:00 28 ********* 1 2021-08-17 13:10 27 ******** ... ..( 2 skipped). .. ******** 4 2021-08-17 13:40 27 ******** 5 2021-08-17 13:50 28 ********* ... ..( 6 skipped). .. ********* 12 2021-08-17 15:00 28 ********* 13 2021-08-17 15:10 27 ******** ... ..( 4 skipped). .. ******** 18 2021-08-17 16:00 27 ******** 19 2021-08-17 16:10 28 ********* ... ..( 52 skipped). .. ********* 72 2021-08-18 01:00 28 ********* 73 2021-08-18 01:10 27 ******** 74 2021-08-18 01:20 28 ********* ... ..( 2 skipped). .. ********* 77 2021-08-18 01:50 28 ********* 78 2021-08-18 02:00 27 ******** 79 2021-08-18 02:10 28 ********* 80 2021-08-18 02:20 27 ******** ... ..( 2 skipped). .. ******** 83 2021-08-18 02:50 27 ******** 84 2021-08-18 03:00 28 ********* 85 2021-08-18 03:10 27 ******** ... ..( 3 skipped). .. ******** 89 2021-08-18 03:50 27 ******** 90 2021-08-18 04:00 28 ********* 91 2021-08-18 04:10 28 ********* 92 2021-08-18 04:20 28 ********* 93 2021-08-18 04:30 27 ******** ... ..( 14 skipped). .. ******** 108 2021-08-18 07:00 27 ******** 109 2021-08-18 07:10 28 ********* 110 2021-08-18 07:20 28 ********* 111 2021-08-18 07:30 27 ******** ... ..( 7 skipped). .. ******** 119 2021-08-18 08:50 27 ******** 120 2021-08-18 09:00 28 ********* 121 2021-08-18 09:10 28 ********* 122 2021-08-18 09:20 28 ********* 123 2021-08-18 09:30 27 ******** ... ..( 11 skipped). .. ******** 135 2021-08-18 11:30 27 ******** 136 2021-08-18 11:40 28 ********* 137 2021-08-18 11:50 28 ********* 138 2021-08-18 12:00 28 ********* 139 2021-08-18 12:10 27 ******** ... ..( 6 skipped). .. ******** 146 2021-08-18 13:20 27 ******** 147 2021-08-18 13:30 28 ********* ... ..( 30 skipped). .. ********* 178 2021-08-18 18:40 28 ********* 179 2021-08-18 18:50 29 ********** 180 2021-08-18 19:00 29 ********** 181 2021-08-18 19:10 28 ********* ... ..( 25 skipped). .. ********* 207 2021-08-18 23:30 28 ********* SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 448 --- Lifetime Power-On Resets 0x01 0x018 6 716487361 --- Logical Sectors Written 0x01 0x028 6 446978921 --- Logical Sectors Read 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 28 --- Current Temperature 0x05 0x010 1 27 --- Average Short Term Temperature 0x05 0x018 1 27 --- Average Long Term Temperature 0x05 0x020 1 66 --- Highest Temperature 0x05 0x028 1 9 --- Lowest Temperature 0x05 0x030 1 37 --- Highest Average Short Term Temperature 0x05 0x038 1 11 --- Lowest Average Short Term Temperature 0x05 0x040 1 32 --- Highest Average Long Term Temperature 0x05 0x048 1 15 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 0 --- Number of Hardware Resets 0x06 0x010 4 4797 --- Number of ASR Events 0x06 0x018 4 10 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 1 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.13.9-200.fc34.x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K1000.C Device Model: Hitachi HDS721010CLA332 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JP4OA3MA User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Aug 18 23:31:07 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10105) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 168) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 136 136 054 - 95 3 Spin_Up_Time POS--- 141 141 024 - 279 (Average 260) 4 Start_Stop_Count -O--C- 100 100 000 - 528 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 130 130 020 - 35 9 Power_On_Hours -O--C- 088 088 000 - 87203 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 526 192 Power-Off_Retract_Count -O--CK 100 100 000 - 567 193 Load_Cycle_Count -O--C- 100 100 000 - 567 194 Temperature_Celsius -O---- 176 176 000 - 34 (Min/Max 4/54) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 4 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 0 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 33/38 Celsius Lifetime Min/Max Temperature: 4/54 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (125) Index Estimated Time Temperature Celsius 126 2021-08-18 21:24 34 *************** ... ..(126 skipped). .. *************** 125 2021-08-18 23:31 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 526 --- Lifetime Power-On Resets 0x01 0x010 4 87203 --- Power-on Hours 0x01 0x018 6 9021015895 --- Logical Sectors Written 0x01 0x020 6 72553750 --- Number of Write Commands 0x01 0x028 6 4210199829845 --- Logical Sectors Read 0x01 0x030 6 350581461 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 87184 --- Spindle Motor Power-on Hours 0x03 0x010 4 87184 --- Head Flying Hours 0x03 0x018 4 567 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 179 --- Read Recovery Attempts 0x03 0x030 4 2 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 511 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 --- Current Temperature 0x05 0x010 1 33 N-- Average Short Term Temperature 0x05 0x018 1 31 N-- Average Long Term Temperature 0x05 0x020 1 54 --- Highest Temperature 0x05 0x028 1 4 --- Lowest Temperature 0x05 0x030 1 49 N-- Highest Average Short Term Temperature 0x05 0x038 1 0 N-- Lowest Average Short Term Temperature 0x05 0x040 1 47 N-- Highest Average Long Term Temperature 0x05 0x048 1 0 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 10517 --- Number of Hardware Resets 0x06 0x010 4 10009 --- Number of ASR Events 0x06 0x018 4 4 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdd smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.13.9-200.fc34.x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green Device Model: WDC WD5000AADS-00L4B1 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 05.04C05 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.5, 3.0 Gb/s Local Time is: Wed Aug 18 23:31:08 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10800) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 127) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 142 132 021 - 5891 4 Start_Stop_Count -O--CK 100 100 000 - 671 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 001 001 000 - 93888 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 667 192 Power-Off_Retract_Count -O--CK 200 200 000 - 62 193 Load_Cycle_Count -O--CK 200 200 000 - 671 194 Temperature_Celsius -O---K 113 090 000 - 34 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 7 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 24 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 258 (0x0102) Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 33/35 Celsius Lifetime Min/Max Temperature: 30/57 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (58) Index Estimated Time Temperature Celsius 59 2021-08-18 15:34 34 *************** ... ..(476 skipped). .. *************** 58 2021-08-18 23:31 34 *************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x8000 4 389489 Vendor specific /dev/sde smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.13.9-200.fc34.x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Toshiba P300 (CMR) Device Model: TOSHIBA HDWD120 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX4OACF0 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Aug 18 23:31:09 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (15013) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 251) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 141 141 054 - 66 3 Spin_Up_Time POS--- 147 147 024 - 260 (Average 257) 4 Start_Stop_Count -O--C- 100 100 000 - 91 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 098 098 000 - 19383 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 91 192 Power-Off_Retract_Count -O--CK 100 100 000 - 590 193 Load_Cycle_Count -O--C- 100 100 000 - 590 194 Temperature_Celsius -O---- 193 193 000 - 31 (Min/Max 10/40) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 30/33 Celsius Lifetime Min/Max Temperature: 10/40 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (84) Index Estimated Time Temperature Celsius 85 2021-08-18 21:24 31 ************ ... ..(126 skipped). .. ************ 84 2021-08-18 23:31 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 91 --- Lifetime Power-On Resets 0x01 0x010 4 19383 --- Power-on Hours 0x01 0x018 6 669221528 --- Logical Sectors Written 0x01 0x020 6 585711 --- Number of Write Commands 0x01 0x028 6 9290228 --- Logical Sectors Read 0x01 0x030 6 52138 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 19379 --- Spindle Motor Power-on Hours 0x03 0x010 4 19379 --- Head Flying Hours 0x03 0x018 4 590 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 11 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x010 1 31 N-- Average Short Term Temperature 0x05 0x018 1 30 N-- Average Long Term Temperature 0x05 0x020 1 40 --- Highest Temperature 0x05 0x028 1 10 --- Lowest Temperature 0x05 0x030 1 38 N-- Highest Average Short Term Temperature 0x05 0x038 1 24 N-- Lowest Average Short Term Temperature 0x05 0x040 1 35 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 7599 --- Number of Hardware Resets 0x06 0x010 4 7512 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS


Hardware for Linux and BSD

GitHub