/dev/sda === START OF INFORMATION SECTION === Model Family: HGST Travelstar 5K1000 Device Model: HGST HTS541010A9E680 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JA0OA710 User Capacity: 1 000 204 886 016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Sep 20 16:34:36 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 241) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 2 Throughput_Performance P-S--K 198 100 040 - 136 3 Spin_Up_Time PO---K 175 100 033 - 1 4 Start_Stop_Count -O--CK 100 100 000 - 722 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 117 100 040 - 33 9 Power_On_Hours -O--CK 089 089 000 - 4884 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 722 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 5439488 190 Airflow_Temperature_Cel -O---K 071 057 045 - 29 (Min/Max 18/29) 191 G-Sense_Error_Rate -O--CK 099 099 000 - 385 192 Power-Off_Retract_Count -O--CK 100 100 000 - 786444 193 Load_Cycle_Count -O--CK 081 081 000 - 197072 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 20% 16 - # 2 Short offline Completed without error 00% 3 - # 3 Short offline Completed without error 00% 2 - # 4 Short offline Completed without error 00% 2 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 18/29 Celsius Lifetime Min/Max Temperature: 15/43 Celsius Lifetime Average Temperature: 31 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (4) Index Estimated Time Temperature Celsius 5 2017-09-20 14:27 28 ********* ... ..( 10 skipped). .. ********* 16 2017-09-20 14:38 28 ********* 17 2017-09-20 14:39 27 ******** 18 2017-09-20 14:40 28 ********* 19 2017-09-20 14:41 28 ********* 20 2017-09-20 14:42 28 ********* 21 2017-09-20 14:43 27 ******** 22 2017-09-20 14:44 28 ********* 23 2017-09-20 14:45 28 ********* 24 2017-09-20 14:46 27 ******** 25 2017-09-20 14:47 28 ********* ... ..( 9 skipped). .. ********* 35 2017-09-20 14:57 28 ********* 36 2017-09-20 14:58 27 ******** 37 2017-09-20 14:59 28 ********* ... ..( 38 skipped). .. ********* 76 2017-09-20 15:38 28 ********* 77 2017-09-20 15:39 29 ********** 78 2017-09-20 15:40 28 ********* ... ..( 5 skipped). .. ********* 84 2017-09-20 15:46 28 ********* 85 2017-09-20 15:47 29 ********** 86 2017-09-20 15:48 28 ********* 87 2017-09-20 15:49 28 ********* 88 2017-09-20 15:50 28 ********* 89 2017-09-20 15:51 29 ********** ... ..( 4 skipped). .. ********** 94 2017-09-20 15:56 29 ********** 95 2017-09-20 15:57 28 ********* 96 2017-09-20 15:58 28 ********* 97 2017-09-20 15:59 28 ********* 98 2017-09-20 16:00 29 ********** ... ..( 2 skipped). .. ********** 101 2017-09-20 16:03 29 ********** 102 2017-09-20 16:04 28 ********* 103 2017-09-20 16:05 29 ********** 104 2017-09-20 16:06 29 ********** 105 2017-09-20 16:07 28 ********* 106 2017-09-20 16:08 29 ********** ... ..( 2 skipped). .. ********** 109 2017-09-20 16:11 29 ********** 110 2017-09-20 16:12 28 ********* 111 2017-09-20 16:13 29 ********** 112 2017-09-20 16:14 29 ********** 113 2017-09-20 16:15 29 ********** 114 2017-09-20 16:16 28 ********* 115 2017-09-20 16:17 29 ********** ... ..( 4 skipped). .. ********** 120 2017-09-20 16:22 29 ********** 121 2017-09-20 16:23 28 ********* 122 2017-09-20 16:24 28 ********* 123 2017-09-20 16:25 29 ********** ... ..( 8 skipped). .. ********** 4 2017-09-20 16:34 29 ********** SCT Error Recovery Control: Read: 85 (8,5 seconds) Write: 85 (8,5 seconds) Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS