/dev/sda === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD642JJ Serial Number: -- LU WWN Device Id: 5 0000f0 ... Firmware Version: 1AA01108 User Capacity: 640 135 028 736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Wed Sep 28 12:38:10 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (10972) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 184) minutes. Conveyance self-test routine recommended polling time: ( 20) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 099 044 051 Past 311 3 Spin_Up_Time POS--- 078 078 011 - 7470 4 Start_Stop_Count -O--CK 093 093 000 - 6627 5 Reallocated_Sector_Ct PO--CK 076 076 010 - 1028 7 Seek_Error_Rate POSR-- 100 100 051 - 0 8 Seek_Time_Performance P-S--K 100 100 015 - 0 9 Power_On_Hours -O--CK 094 094 000 - 31251 10 Spin_Retry_Count PO--CK 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 094 094 000 - 5773 13 Read_Soft_Error_Rate -OSR-- 099 046 000 - 302 183 Runtime_Bad_Block -O--CK 100 100 000 - 19 184 End-to-End_Error PO--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 7243 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 071 045 000 - 29 (Min/Max 25/29) 194 Temperature_Celsius -O---K 069 043 000 - 31 (0 25 31 25 0) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 37250 196 Reallocated_Event_Count -O--CK 100 100 000 - 3 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 0 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Max Temperature: 31 Celsius Lifetime Max Temperature: 58 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (90) Index Estimated Time Temperature Celsius 91 2016-09-28 10:31 30 *********** ... ..( 2 skipped). .. *********** 94 2016-09-28 10:34 30 *********** 95 2016-09-28 10:35 ? - 96 2016-09-28 10:36 27 ******** ... ..( 2 skipped). .. ******** 99 2016-09-28 10:39 27 ******** 100 2016-09-28 10:40 28 ********* 101 2016-09-28 10:41 28 ********* 102 2016-09-28 10:42 28 ********* 103 2016-09-28 10:43 29 ********** ... ..( 4 skipped). .. ********** 108 2016-09-28 10:48 29 ********** 109 2016-09-28 10:49 30 *********** ... ..( 6 skipped). .. *********** 116 2016-09-28 10:56 30 *********** 117 2016-09-28 10:57 31 ************ ... ..( 30 skipped). .. ************ 20 2016-09-28 11:28 31 ************ 21 2016-09-28 11:29 ? - 22 2016-09-28 11:30 26 ******* 23 2016-09-28 11:31 26 ******* 24 2016-09-28 11:32 27 ******** 25 2016-09-28 11:33 27 ******** 26 2016-09-28 11:34 27 ******** 27 2016-09-28 11:35 28 ********* 28 2016-09-28 11:36 28 ********* 29 2016-09-28 11:37 28 ********* 30 2016-09-28 11:38 29 ********** 31 2016-09-28 11:39 29 ********** 32 2016-09-28 11:40 29 ********** 33 2016-09-28 11:41 30 *********** ... ..( 5 skipped). .. *********** 39 2016-09-28 11:47 30 *********** 40 2016-09-28 11:48 31 ************ ... ..( 8 skipped). .. ************ 49 2016-09-28 11:57 31 ************ 50 2016-09-28 11:58 ? - 51 2016-09-28 11:59 26 ******* 52 2016-09-28 12:00 26 ******* 53 2016-09-28 12:01 26 ******* 54 2016-09-28 12:02 27 ******** 55 2016-09-28 12:03 27 ******** 56 2016-09-28 12:04 27 ******** 57 2016-09-28 12:05 28 ********* 58 2016-09-28 12:06 28 ********* 59 2016-09-28 12:07 29 ********** ... ..( 2 skipped). .. ********** 62 2016-09-28 12:10 29 ********** 63 2016-09-28 12:11 30 *********** ... ..( 2 skipped). .. *********** 66 2016-09-28 12:14 30 *********** 67 2016-09-28 12:15 31 ************ ... ..( 22 skipped). .. ************ 90 2016-09-28 12:38 31 ************ SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb === START OF INFORMATION SECTION === Device Model: Kingrich K3 32GB SATA2 SSD Serial Number: -- Firmware Version: 1.15_SG0 User Capacity: 31 954 083 840 bytes [31,9 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS, ATA/ATAPI-4 published, ANSI NCITS 317-1998 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Sep 28 12:38:11 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Disabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Unavailable Write cache is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Unavailable SMART Disabled. Use option -s with argument 'on' to enable it. (override with '-T permissive' option) /dev/sdc === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.11 Device Model: ST31500341AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC1H User Capacity: 1 500 301 910 016 bytes [1,50 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Wed Sep 28 12:38:11 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 609) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 298) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 119 099 006 - 232694474 3 Spin_Up_Time PO---- 100 092 000 - 0 4 Start_Stop_Count -O--CK 093 093 020 - 7781 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 7 Seek_Error_Rate POSR-- 081 060 030 - 166459893 9 Power_On_Hours -O--CK 092 074 000 - 7076 10 Spin_Retry_Count PO--C- 100 100 097 - 4 12 Power_Cycle_Count -O--CK 095 037 020 - 5273 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 098 000 - 47 189 High_Fly_Writes -O-RCK 001 001 000 - 176 190 Airflow_Temperature_Cel -O---K 059 042 045 Past 41 (Min/Max 32/42 #52) 194 Temperature_Celsius -O---K 041 058 000 - 41 (0 14 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 032 019 000 - 232694474 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 15 240 Head_Flying_Hours ------ 100 253 000 - 30084 (63 251 0) 241 Total_LBAs_Written ------ 100 253 000 - 984574973 242 Total_LBAs_Read ------ 100 253 000 - 3726021385 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 32/42 Celsius Lifetime Min/Max Temperature: 14/58 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (62) Index Estimated Time Temperature Celsius 63 2016-09-28 10:31 42 *********************** ... ..( 9 skipped). .. *********************** 73 2016-09-28 10:41 42 *********************** 74 2016-09-28 10:42 41 ********************** ... ..( 33 skipped). .. ********************** 108 2016-09-28 11:16 41 ********************** 109 2016-09-28 11:17 42 *********************** ... ..( 22 skipped). .. *********************** 4 2016-09-28 11:40 42 *********************** 5 2016-09-28 11:41 41 ********************** ... ..( 44 skipped). .. ********************** 50 2016-09-28 12:26 41 ********************** 51 2016-09-28 12:27 40 ********************* ... ..( 8 skipped). .. ********************* 60 2016-09-28 12:36 40 ********************* 61 2016-09-28 12:37 41 ********************** 62 2016-09-28 12:38 41 ********************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS