/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Black Mobile Device Model: WDC WD7500BPKX-75HPJT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 750,156,374,016 bytes [750 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Oct 11 13:38:56 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12900) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 128) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 194 171 021 - 1300 4 Start_Stop_Count -O--CK 087 087 000 - 13218 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 076 076 000 - 18191 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 092 092 000 - 8089 191 G-Sense_Error_Rate -O--CK 001 001 000 - 1668 192 Power-Off_Retract_Count -O--CK 200 200 000 - 388 193 Load_Cycle_Count -O--CK 126 126 000 - 222659 194 Temperature_Celsius -O---K 097 082 000 - 50 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 240 Head_Flying_Hours -O--CK 091 091 000 - 6614 241 Total_LBAs_Written -O--CK 200 200 000 - 57290699413 242 Total_LBAs_Read -O--CK 200 200 000 - 55760488816 254 Free_Fall_Sensor -O--CK 193 193 000 - 7 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 18145 - # 2 Short offline Completed without error 00% 17107 - # 3 Short offline Completed without error 00% 17090 - # 4 Short offline Completed without error 00% 17089 - # 5 Short offline Completed without error 00% 16137 - # 6 Short offline Completed without error 00% 15957 - # 7 Short offline Completed without error 00% 15949 - # 8 Short offline Completed without error 00% 15947 - # 9 Short offline Completed without error 00% 15945 - #10 Short offline Completed without error 00% 15945 - #11 Short offline Completed without error 00% 15929 - #12 Short offline Completed without error 00% 15771 - #13 Short offline Completed without error 00% 15579 - #14 Short offline Completed without error 00% 15536 - #15 Short offline Completed without error 00% 15077 - #16 Short offline Aborted by host 90% 14458 - #17 Short offline Completed without error 00% 14456 - #18 Short offline Completed without error 00% 14452 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 50 Celsius Power Cycle Min/Max Temperature: 50/50 Celsius Lifetime Min/Max Temperature: 0/65 Celsius Lifetime Average Temperature: 37 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (43) Index Estimated Time Temperature Celsius 44 2018-10-11 11:31 48 ***************************** ... ..( 16 skipped). .. ***************************** 61 2018-10-11 11:48 48 ***************************** 62 2018-10-11 11:49 49 ****************************** 63 2018-10-11 11:50 48 ***************************** 64 2018-10-11 11:51 49 ****************************** 65 2018-10-11 11:52 48 ***************************** 66 2018-10-11 11:53 49 ****************************** 67 2018-10-11 11:54 48 ***************************** 68 2018-10-11 11:55 48 ***************************** 69 2018-10-11 11:56 49 ****************************** 70 2018-10-11 11:57 49 ****************************** 71 2018-10-11 11:58 48 ***************************** 72 2018-10-11 11:59 49 ****************************** 73 2018-10-11 12:00 48 ***************************** 74 2018-10-11 12:01 48 ***************************** 75 2018-10-11 12:02 49 ****************************** 76 2018-10-11 12:03 48 ***************************** 77 2018-10-11 12:04 49 ****************************** 78 2018-10-11 12:05 48 ***************************** 79 2018-10-11 12:06 49 ****************************** ... ..( 15 skipped). .. ****************************** 95 2018-10-11 12:22 49 ****************************** 96 2018-10-11 12:23 ? - 97 2018-10-11 12:24 27 ******** 98 2018-10-11 12:25 27 ******** 99 2018-10-11 12:26 27 ******** 100 2018-10-11 12:27 28 ********* 101 2018-10-11 12:28 30 *********** 102 2018-10-11 12:29 31 ************ 103 2018-10-11 12:30 32 ************* 104 2018-10-11 12:31 33 ************** 105 2018-10-11 12:32 35 **************** 106 2018-10-11 12:33 35 **************** 107 2018-10-11 12:34 36 ***************** 108 2018-10-11 12:35 36 ***************** 109 2018-10-11 12:36 37 ****************** 110 2018-10-11 12:37 38 ******************* 111 2018-10-11 12:38 39 ******************** 112 2018-10-11 12:39 39 ******************** 113 2018-10-11 12:40 40 ********************* ... ..( 2 skipped). .. ********************* 116 2018-10-11 12:43 40 ********************* 117 2018-10-11 12:44 41 ********************** 118 2018-10-11 12:45 41 ********************** 119 2018-10-11 12:46 42 *********************** 120 2018-10-11 12:47 42 *********************** 121 2018-10-11 12:48 42 *********************** 122 2018-10-11 12:49 43 ************************ 123 2018-10-11 12:50 43 ************************ 124 2018-10-11 12:51 44 ************************* 125 2018-10-11 12:52 44 ************************* 126 2018-10-11 12:53 45 ************************** ... ..( 5 skipped). .. ************************** 4 2018-10-11 12:59 45 ************************** 5 2018-10-11 13:00 46 *************************** ... ..( 10 skipped). .. *************************** 16 2018-10-11 13:11 46 *************************** 17 2018-10-11 13:12 47 **************************** ... ..( 8 skipped). .. **************************** 26 2018-10-11 13:21 47 **************************** 27 2018-10-11 13:22 48 ***************************** 28 2018-10-11 13:23 47 **************************** 29 2018-10-11 13:24 48 ***************************** 30 2018-10-11 13:25 47 **************************** ... ..( 2 skipped). .. **************************** 33 2018-10-11 13:28 47 **************************** 34 2018-10-11 13:29 48 ***************************** ... ..( 5 skipped). .. ***************************** 40 2018-10-11 13:35 48 ***************************** 41 2018-10-11 13:36 ? - 42 2018-10-11 13:37 50 ******************************* 43 2018-10-11 13:38 50 ******************************* SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 125 Vendor specific /dev/sdb === START OF INFORMATION SECTION === Device Model: LITEONIT LMN-256M3M mSATA 256GB Serial Number: -- Add. Product Id: WZDC Firmware Version: WZDC User Capacity: 256,060,514,304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a SATA Version is: SATA 3.0, 6.0 Gb/s Local Time is: Thu Oct 11 13:38:56 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 10) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0 12 Power_Cycle_Count PO---- 100 100 000 - 8167 175 Program_Fail_Count_Chip PO---- 100 100 000 - 0 176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0 177 Wear_Leveling_Count PO---- 100 100 000 - 370029 178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 10 179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 22 180 Unused_Rsvd_Blk_Cnt_Tot PO---- 088 088 005 - 2528 181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0 182 Erase_Fail_Count_Total PO---- 100 100 000 - 0 187 Reported_Uncorrect PO---- 100 100 000 - 22 195 Hardware_ECC_Recovered PO---- 100 100 000 - 0 241 Total_LBAs_Written PO---- 100 100 000 - 829637 242 Total_LBAs_Read PO---- 100 100 000 - 2147114 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 0 SMART Log Directory Version 0 Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 1 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 Warning: ATA error count 0 inconsistent with error log pointer 2 ATA Error Count: 0 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- ad 10 04 00 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 ad 04 00 00 00 00 99 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 ad 04 00 00 00 00 97 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 ad 04 00 00 00 00 96 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 ad 04 00 00 00 00 94 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] Error -1 occurred at disk power-on lifetime: 768 hours (32 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 00 00 00 00 10 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 00 00 00 00 00 04 33d+16:54:52.160 NOP [Abort queued commands] 00 00 00 00 00 00 00 04 33d+16:52:41.088 NOP [Abort queued commands] 00 00 00 00 00 00 00 04 33d+16:50:30.016 NOP [Abort queued commands] 00 00 00 00 00 00 00 04 33d+16:49:24.480 NOP [Abort queued commands] 00 00 00 00 00 00 00 00 33d+16:47:13.408 NOP [Abort queued commands] Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 ad 00 00 00 00 8b Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ad 00 00 00 00 00 89 00 00:00:00.004 [RESERVED] ad 00 00 00 00 00 88 00 00:00:00.004 [RESERVED] ad 00 00 00 00 00 86 00 00:00:00.004 [RESERVED] ad 00 00 00 00 00 84 00 00:00:00.004 [RESERVED] 00 00 00 00 00 03 00 00 00:00:00.000 NOP [Abort queued commands] Error -3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 00 00 00 83 ad 04 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 00 00 81 ad 04 00 00:00:00.000 NOP [Abort queued commands] 00 00 00 00 80 ad 04 00 00:00:00.000 NOP [Abort queued commands] 00 00 00 00 7e ad 04 00 00:00:00.000 NOP [Abort queued commands] 00 00 00 00 7d ad 04 00 00:00:00.000 NOP [Abort queued commands] 00 00 00 03 01 00 00 00 00:00:00.000 NOP [Abort queued commands] Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 00 7b ad 04 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 00 7a ad 04 00 00 00 00:00:00.000 NOP [Abort queued commands] 00 00 78 ad 04 00 00 00 00:00:00.000 NOP [Abort queued commands] 00 00 76 ad 04 00 00 00 00:00:00.000 NOP [Abort queued commands] 00 60 7a 9b 07 00 00 00 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] 00 03 00 00 00 00 00 00 49d+17:02:47.040 NOP [Reserved subcommand] [OBS-ACS-2] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 8480 - # 2 Short offline Completed without error 00% 8480 - # 3 Short offline Completed without error 00% 22557 - # 4 Short offline Completed without error 00% 19741 - # 5 Short offline Completed without error 00% 19485 - # 6 Short offline Completed without error 00% 48154 - # 7 Short offline Completed without error 00% 26138 - # 8 Short offline Completed without error 00% 24858 - # 9 Short offline Completed without error 00% 24858 - #10 Short offline Completed without error 00% 22554 - #11 Short offline Completed without error 00% 1306 - #12 Short offline Completed without error 00% 34841 - #13 Short offline Completed without error 00% 27929 - #14 Short offline Completed without error 00% 280 - #15 Short offline Completed without error 00% 63510 - #16 Short offline Completed without error 00% 63254 - #17 Short offline Completed without error 00% 55572 - #18 Short offline Interrupted (host reset) 10% 55060 - #19 Short offline Completed without error 00% 54804 - Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (0) Index Estimated Time Temperature Celsius 1 2018-10-11 11:31 ? - ... ..(126 skipped). .. - 0 2018-10-11 13:38 ? - SCT Error Recovery Control: Read: 2 (0.2 seconds) Write: 2 (0.2 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC