/dev/nvme0n1 smartctl 7.2 2021-06-06 r5225 [x86_64-linux-5.15.5-1-default] (SUSE RPM) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: SAMSUNG MZVLB1T0HBLR-000H1 Serial Number: -- Firmware Version: HPS0NEXF PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 1,024,209,543,168 [1.02 TB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 1,024,209,543,168 [1.02 TB] Namespace 1 Utilization: 304,763,396,096 [304 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Tue Dec 7 15:18:19 2021 EST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 81 Celsius Critical Comp. Temp. Threshold: 82 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 8.00W - - 0 0 0 0 0 0 1 + 6.30W - - 1 1 1 1 0 0 2 + 3.50W - - 2 2 2 2 0 0 3 - 0.0700W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 1 - 4096 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 44 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 0% Data Units Read: 1,699,027 [869 GB] Data Units Written: 17,586,666 [9.00 TB] Host Read Commands: 16,394,111 Host Write Commands: 136,342,875 Controller Busy Time: 402 Power Cycles: 381 Power On Hours: 145 Unsafe Shutdowns: 79 Media and Data Integrity Errors: 0 Error Information Log Entries: 499 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 44 Celsius Temperature Sensor 2: 50 Celsius Error Information (NVMe Log 0x01, 16 of 256 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 499 0 0x700d 0x4004 - 0 0 - /dev/sda smartctl 7.2 2021-06-06 r5225 [x86_64-linux-5.15.5-1-default] (SUSE RPM) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Black (SMR) Device Model: WDC WD10SPSX-60A6WT0 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Dec 7 15:18:19 2021 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2160) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 145) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 32 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0 3 Spin_Up_Time POS--K 052 050 021 - 1750 4 Start_Stop_Count -O--CK 100 100 000 - 371 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate POSR-K 100 100 030 - 39356 9 Power_On_Hours -O--CK 100 100 000 - 1113 10 Spin_Retry_Count PO--CK 100 100 050 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 361 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO-RCK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 191 G-Sense_Error_Rate -O--CK 091 091 000 - 9 192 Power-Off_Retract_Count -O--CK 100 100 000 - 283467841602 193 Load_Cycle_Count -O--CK 099 099 000 - 2192 194 Temperature_Celsius -O---K 037 050 000 - 37 (Min/Max 23/39) 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 240 Head_Flying_Hours -O--CK 100 100 000 - 20237 243 Unknown_Attribute -O--CK 100 100 000 - 96943 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 288 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 74 Device vendor specific log 0xb9 GPL,SL VS 4 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xc7 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 64 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 64 [15] occurred at disk power-on lifetime: 1028 hours (42 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 12:44:44.385 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 12:44:44.385 SECURITY FREEZE LOCK 25 00 00 00 01 00 00 00 00 00 00 e0 00 12:44:44.111 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 e0 00 12:44:44.056 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 e0 00 12:44:44.052 IDENTIFY DEVICE Error 63 [14] occurred at disk power-on lifetime: 680 hours (28 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 07:27:59.167 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 07:27:59.167 SECURITY FREEZE LOCK 25 00 00 00 01 00 00 00 00 00 00 e0 00 07:27:58.893 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 e0 00 07:27:58.837 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 e0 00 07:27:58.833 IDENTIFY DEVICE Error 62 [13] occurred at disk power-on lifetime: 372 hours (15 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:02:56.187 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:56.186 SECURITY FREEZE LOCK 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:02:55.903 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:55.851 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:02:55.847 IDENTIFY DEVICE Error 61 [12] occurred at disk power-on lifetime: 372 hours (15 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 02:00:52.847 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 02:00:52.846 SECURITY FREEZE LOCK 25 00 00 00 01 00 00 00 00 00 00 e0 00 02:00:52.562 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 e0 00 02:00:52.506 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 e0 00 02:00:52.502 IDENTIFY DEVICE Error 60 [11] occurred at disk power-on lifetime: 370 hours (15 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:52:39.850 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:52:39.850 SECURITY FREEZE LOCK 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:52:39.572 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:52:39.521 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:52:39.517 IDENTIFY DEVICE Error 59 [10] occurred at disk power-on lifetime: 370 hours (15 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:30:34.771 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:30:34.770 SECURITY FREEZE LOCK 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:30:34.495 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:30:34.438 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:30:34.434 IDENTIFY DEVICE Error 58 [9] occurred at disk power-on lifetime: 369 hours (15 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:07:14.838 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:07:14.838 SECURITY FREEZE LOCK 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:07:14.562 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:07:14.507 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:07:14.503 IDENTIFY DEVICE Error 57 [8] occurred at disk power-on lifetime: 369 hours (15 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 00 00 00 00 00 00 00 e0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b4 00 20 00 00 00 00 00 72 4c 6b e0 00 00:01:30.086 SANITIZE DEVICE f5 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:30.085 SECURITY FREEZE LOCK 25 00 00 00 01 00 00 00 00 00 00 e0 00 00:01:29.798 READ DMA EXT ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:29.746 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 e0 00 00:01:29.741 IDENTIFY DEVICE SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1110 - # 2 Short offline Completed without error 00% 1099 - # 3 Extended offline Aborted by host 30% 1084 - # 4 Short offline Completed without error 00% 1075 - # 5 Short offline Completed without error 00% 1064 - # 6 Short offline Completed without error 00% 1048 - # 7 Short offline Completed without error 00% 1032 - # 8 Short offline Completed without error 00% 1016 - # 9 Short offline Completed without error 00% 1004 - #10 Short offline Completed without error 00% 995 - #11 Short offline Completed without error 00% 993 - #12 Short offline Completed without error 00% 984 - #13 Short offline Completed without error 00% 968 - #14 Short offline Completed without error 00% 952 - #15 Short offline Completed without error 00% 948 - #16 Short offline Completed without error 00% 934 - #17 Short offline Completed without error 00% 919 - #18 Short offline Completed without error 00% 909 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 23/39 Celsius Lifetime Min/Max Temperature: 17/50 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (42) Index Estimated Time Temperature Celsius 43 2021-12-07 13:11 35 **************** 44 2021-12-07 13:12 35 **************** 45 2021-12-07 13:13 35 **************** 46 2021-12-07 13:14 36 ***************** ... ..( 9 skipped). .. ***************** 56 2021-12-07 13:24 36 ***************** 57 2021-12-07 13:25 ? - 58 2021-12-07 13:26 23 **** 59 2021-12-07 13:27 23 **** 60 2021-12-07 13:28 23 **** 61 2021-12-07 13:29 24 ***** 62 2021-12-07 13:30 25 ****** 63 2021-12-07 13:31 26 ******* 64 2021-12-07 13:32 27 ******** 65 2021-12-07 13:33 27 ******** 66 2021-12-07 13:34 28 ********* 67 2021-12-07 13:35 28 ********* 68 2021-12-07 13:36 29 ********** 69 2021-12-07 13:37 29 ********** 70 2021-12-07 13:38 30 *********** 71 2021-12-07 13:39 30 *********** 72 2021-12-07 13:40 31 ************ 73 2021-12-07 13:41 31 ************ 74 2021-12-07 13:42 32 ************* 75 2021-12-07 13:43 32 ************* 76 2021-12-07 13:44 33 ************** 77 2021-12-07 13:45 33 ************** 78 2021-12-07 13:46 34 *************** 79 2021-12-07 13:47 34 *************** 80 2021-12-07 13:48 34 *************** 81 2021-12-07 13:49 35 **************** ... ..( 2 skipped). .. **************** 84 2021-12-07 13:52 35 **************** 85 2021-12-07 13:53 36 ***************** 86 2021-12-07 13:54 36 ***************** 87 2021-12-07 13:55 37 ****************** ... ..( 2 skipped). .. ****************** 90 2021-12-07 13:58 37 ****************** 91 2021-12-07 13:59 38 ******************* ... ..( 34 skipped). .. ******************* 126 2021-12-07 14:34 38 ******************* 127 2021-12-07 14:35 39 ******************** ... ..( 17 skipped). .. ******************** 17 2021-12-07 14:53 39 ******************** 18 2021-12-07 14:54 38 ******************* ... ..( 13 skipped). .. ******************* 32 2021-12-07 15:08 38 ******************* 33 2021-12-07 15:09 37 ****************** ... ..( 8 skipped). .. ****************** 42 2021-12-07 15:18 37 ****************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 6749 Vendor specific