/dev/sda === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA (AF) Device Model: WDC WD5000BPVT-22HXZT3 Serial Number: -- LU WWN Device Id: 5 0014ee ... Firmware Version: 01.01A01 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Fri Mar 8 11:42:56 2024 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12000) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 119) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 42 3 Spin_Up_Time POS--K 185 179 021 - 1750 4 Start_Stop_Count -O--CK 080 080 000 - 20712 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 087 087 000 - 9867 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 098 098 000 - 2982 191 G-Sense_Error_Rate -O--CK 001 001 000 - 4316 192 Power-Off_Retract_Count -O--CK 200 200 000 - 108 193 Load_Cycle_Count -O--CK 001 001 000 - 1094047 194 Temperature_Celsius -O---K 111 082 000 - 36 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 90 (device log contains only the most recent 24 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 90 [17] occurred at disk power-on lifetime: 4798 hours (199 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 16 7c 20 e0 00 Error: UNC 8 sectors at LBA = 0x03167c20 = 51805216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 03 16 7c 20 e0 00 00:02:13.979 READ DMA EXT 25 00 00 00 08 00 00 03 16 7c 20 e0 00 00:02:11.438 READ DMA EXT 25 00 00 00 08 00 00 03 16 7c 20 e0 00 00:02:08.896 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:06.354 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:03.812 READ DMA EXT Error 89 [16] occurred at disk power-on lifetime: 4798 hours (199 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 16 7c 20 e0 00 Error: UNC 8 sectors at LBA = 0x03167c20 = 51805216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 03 16 7c 20 e0 00 00:02:11.438 READ DMA EXT 25 00 00 00 08 00 00 03 16 7c 20 e0 00 00:02:08.896 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:06.354 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:03.812 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:01.270 READ DMA EXT Error 88 [15] occurred at disk power-on lifetime: 4798 hours (199 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 08 00 00 03 16 7c 20 e0 00 Error: UNC 8 sectors at LBA = 0x03167c20 = 51805216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 03 16 7c 20 e0 00 00:02:08.896 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:06.354 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:03.812 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:01.270 READ DMA EXT 25 00 00 00 08 00 00 03 16 7c 18 e0 00 00:02:01.270 READ DMA EXT Error 87 [14] occurred at disk power-on lifetime: 4798 hours (199 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 78 00 00 03 16 7c 20 e0 00 Error: UNC 120 sectors at LBA = 0x03167c20 = 51805216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:06.354 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:03.812 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:01.270 READ DMA EXT 25 00 00 00 08 00 00 03 16 7c 18 e0 00 00:02:01.270 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 18 e0 00 00:01:58.728 READ DMA EXT Error 86 [13] occurred at disk power-on lifetime: 4798 hours (199 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 78 00 00 03 16 7c 20 e0 00 Error: UNC 120 sectors at LBA = 0x03167c20 = 51805216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:03.812 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:01.270 READ DMA EXT 25 00 00 00 08 00 00 03 16 7c 18 e0 00 00:02:01.270 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 18 e0 00 00:01:58.728 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 18 e0 00 00:01:56.186 READ DMA EXT Error 85 [12] occurred at disk power-on lifetime: 4798 hours (199 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 78 00 00 03 16 7c 20 e0 00 Error: UNC 120 sectors at LBA = 0x03167c20 = 51805216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 78 00 00 03 16 7c 20 e0 00 00:02:01.270 READ DMA EXT 25 00 00 00 08 00 00 03 16 7c 18 e0 00 00:02:01.270 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 18 e0 00 00:01:58.728 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 18 e0 00 00:01:56.186 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 18 e0 00 00:01:53.655 READ DMA EXT Error 84 [11] occurred at disk power-on lifetime: 4798 hours (199 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 78 00 00 03 16 7c 20 e0 00 Error: UNC 120 sectors at LBA = 0x03167c20 = 51805216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 78 00 00 03 16 7c 18 e0 00 00:01:58.728 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 18 e0 00 00:01:56.186 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 18 e0 00 00:01:53.655 READ DMA EXT 25 00 00 00 08 00 00 03 16 7c 10 e0 00 00:01:53.655 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 10 e0 00 00:01:51.114 READ DMA EXT Error 83 [10] occurred at disk power-on lifetime: 4798 hours (199 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 78 00 00 03 16 7c 20 e0 00 Error: UNC 120 sectors at LBA = 0x03167c20 = 51805216 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 78 00 00 03 16 7c 18 e0 00 00:01:56.186 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 18 e0 00 00:01:53.655 READ DMA EXT 25 00 00 00 08 00 00 03 16 7c 10 e0 00 00:01:53.655 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 10 e0 00 00:01:51.114 READ DMA EXT 25 00 00 00 78 00 00 03 16 7c 10 e0 00 00:01:48.572 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 21/36 Celsius Lifetime Min/Max Temperature: 0/65 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (106) Index Estimated Time Temperature Celsius 107 2024-03-08 09:35 34 *************** ... ..( 4 skipped). .. *************** 112 2024-03-08 09:40 34 *************** 113 2024-03-08 09:41 ? - 114 2024-03-08 09:42 34 *************** 115 2024-03-08 09:43 34 *************** 116 2024-03-08 09:44 34 *************** 117 2024-03-08 09:45 ? - 118 2024-03-08 09:46 34 *************** 119 2024-03-08 09:47 34 *************** 120 2024-03-08 09:48 ? - 121 2024-03-08 09:49 34 *************** ... ..( 2 skipped). .. *************** 124 2024-03-08 09:52 34 *************** 125 2024-03-08 09:53 ? - 126 2024-03-08 09:54 34 *************** 127 2024-03-08 09:55 ? - 0 2024-03-08 09:56 34 *************** 1 2024-03-08 09:57 34 *************** 2 2024-03-08 09:58 ? - 3 2024-03-08 09:59 34 *************** 4 2024-03-08 10:00 34 *************** 5 2024-03-08 10:01 33 ************** 6 2024-03-08 10:02 33 ************** 7 2024-03-08 10:03 33 ************** 8 2024-03-08 10:04 ? - 9 2024-03-08 10:05 33 ************** 10 2024-03-08 10:06 ? - 11 2024-03-08 10:07 33 ************** 12 2024-03-08 10:08 33 ************** 13 2024-03-08 10:09 ? - 14 2024-03-08 10:10 33 ************** 15 2024-03-08 10:11 33 ************** 16 2024-03-08 10:12 ? - 17 2024-03-08 10:13 33 ************** ... ..( 2 skipped). .. ************** 20 2024-03-08 10:16 33 ************** 21 2024-03-08 10:17 ? - 22 2024-03-08 10:18 33 ************** 23 2024-03-08 10:19 ? - 24 2024-03-08 10:20 33 ************** 25 2024-03-08 10:21 33 ************** 26 2024-03-08 10:22 ? - 27 2024-03-08 10:23 33 ************** ... ..( 2 skipped). .. ************** 30 2024-03-08 10:26 33 ************** 31 2024-03-08 10:27 32 ************* 32 2024-03-08 10:28 ? - 33 2024-03-08 10:29 32 ************* 34 2024-03-08 10:30 ? - 35 2024-03-08 10:31 32 ************* ... ..( 3 skipped). .. ************* 39 2024-03-08 10:35 32 ************* 40 2024-03-08 10:36 ? - 41 2024-03-08 10:37 32 ************* 42 2024-03-08 10:38 32 ************* 43 2024-03-08 10:39 ? - 44 2024-03-08 10:40 32 ************* 45 2024-03-08 10:41 ? - 46 2024-03-08 10:42 32 ************* 47 2024-03-08 10:43 32 ************* 48 2024-03-08 10:44 ? - 49 2024-03-08 10:45 32 ************* ... ..( 8 skipped). .. ************* 58 2024-03-08 10:54 32 ************* 59 2024-03-08 10:55 ? - 60 2024-03-08 10:56 32 ************* ... ..( 23 skipped). .. ************* 84 2024-03-08 11:20 32 ************* 85 2024-03-08 11:21 ? - 86 2024-03-08 11:22 32 ************* 87 2024-03-08 11:23 32 ************* 88 2024-03-08 11:24 ? - 89 2024-03-08 11:25 32 ************* 90 2024-03-08 11:26 32 ************* 91 2024-03-08 11:27 ? - 92 2024-03-08 11:28 32 ************* 93 2024-03-08 11:29 32 ************* 94 2024-03-08 11:30 32 ************* 95 2024-03-08 11:31 ? - 96 2024-03-08 11:32 32 ************* 97 2024-03-08 11:33 33 ************** 98 2024-03-08 11:34 33 ************** 99 2024-03-08 11:35 34 *************** 100 2024-03-08 11:36 35 **************** ... ..( 3 skipped). .. **************** 104 2024-03-08 11:40 35 **************** 105 2024-03-08 11:41 ? - 106 2024-03-08 11:42 36 ***************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 21789 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 158291 Vendor specific