/dev/sda smartctl 6.6 (build date Jun 14 2018) [x86_64-linux-5.0.0-25-generic] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ADATA SU800 Serial Number: -- LU WWN Device Id: 5 707c18 ... Firmware Version: Q0518BS User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Sep 10 22:02:57 2019 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown (0xe000) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 542 12 Power_Cycle_Count ------ 100 100 000 - 369 160 Unknown_Attribute ------ 100 100 000 - 0 161 Unknown_Attribute ------ 100 100 000 - 36 163 Unknown_Attribute ------ 100 100 000 - 9 164 Unknown_Attribute ------ 100 100 000 - 5072 165 Unknown_Attribute ------ 100 100 000 - 42 166 Unknown_Attribute ------ 100 100 000 - 1 167 Unknown_Attribute ------ 100 100 000 - 10 148 Unknown_Attribute ------ 100 100 000 - 4145 149 Unknown_Attribute ------ 100 100 000 - 163 150 Unknown_Attribute ------ 100 100 000 - 1 151 Unknown_Attribute ------ 100 100 000 - 121 159 Unknown_Attribute ------ 100 100 000 - 0 168 Unknown_Attribute ------ 100 100 000 - 1500 169 Unknown_Attribute ------ 100 100 000 - 100 177 Wear_Leveling_Count ------ 100 100 050 - 0 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 192 Power-Off_Retract_Count ------ 100 100 000 - 24 194 Temperature_Celsius ------ 100 100 000 - 41 195 Hardware_ECC_Recovered ------ 100 100 000 - 1236 196 Reallocated_Event_Count ------ 100 100 016 - 0 199 UDMA_CRC_Error_Count ------ 100 100 050 - 0 232 Available_Reservd_Space ------ 100 100 000 - 100 241 Total_LBAs_Written ------ 100 100 000 - 8490 242 Total_LBAs_Read ------ 100 100 000 - 9758 245 Unknown_Attribute ------ 100 100 000 - 45648 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 128 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Completed without error 00% 542 - # 2 Offline Completed without error 00% 542 - # 3 Offline Completed without error 00% 528 - # 4 Offline Completed without error 00% 528 - # 5 Offline Completed without error 00% 522 - # 6 Offline Completed without error 00% 522 - # 7 Short offline Completed without error 00% 444 - # 8 Abort offline test Aborted by host 00% 444 - # 9 Short offline Self-test routine in progress 30% 333 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 7 0 65535 Read_scanning was completed without error Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 0 Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: 28/41 Celsius Lifetime Min/Max Temperature: 0/55 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (115) Index Estimated Time Temperature Celsius 116 2019-09-10 19:55 46 *************************** ... ..( 3 skipped). .. *************************** 120 2019-09-10 19:59 46 *************************** 121 2019-09-10 20:00 47 **************************** ... ..( 4 skipped). .. **************************** 126 2019-09-10 20:05 47 **************************** 127 2019-09-10 20:06 43 ************************ ... ..( 3 skipped). .. ************************ 3 2019-09-10 20:10 43 ************************ 4 2019-09-10 20:11 44 ************************* ... ..( 15 skipped). .. ************************* 20 2019-09-10 20:27 44 ************************* 21 2019-09-10 20:28 46 *************************** ... ..( 15 skipped). .. *************************** 37 2019-09-10 20:44 46 *************************** 38 2019-09-10 20:45 47 **************************** ... ..( 3 skipped). .. **************************** 42 2019-09-10 20:49 47 **************************** 43 2019-09-10 20:50 33 ************** 44 2019-09-10 20:51 36 ***************** 45 2019-09-10 20:52 36 ***************** 46 2019-09-10 20:53 38 ******************* 47 2019-09-10 20:54 38 ******************* 48 2019-09-10 20:55 39 ******************** 49 2019-09-10 20:56 41 ********************** 50 2019-09-10 20:57 41 ********************** 51 2019-09-10 20:58 43 ************************ 52 2019-09-10 20:59 43 ************************ 53 2019-09-10 21:00 33 ************** 54 2019-09-10 21:01 34 *************** 55 2019-09-10 21:02 36 ***************** 56 2019-09-10 21:03 36 ***************** 57 2019-09-10 21:04 38 ******************* 58 2019-09-10 21:05 38 ******************* 59 2019-09-10 21:06 39 ******************** 60 2019-09-10 21:07 39 ******************** 61 2019-09-10 21:08 41 ********************** 62 2019-09-10 21:09 41 ********************** 63 2019-09-10 21:10 41 ********************** 64 2019-09-10 21:11 43 ************************ 65 2019-09-10 21:12 43 ************************ 66 2019-09-10 21:13 43 ************************ 67 2019-09-10 21:14 44 ************************* ... ..( 2 skipped). .. ************************* 70 2019-09-10 21:17 44 ************************* 71 2019-09-10 21:18 46 *************************** 72 2019-09-10 21:19 44 ************************* 73 2019-09-10 21:20 46 *************************** ... ..( 5 skipped). .. *************************** 79 2019-09-10 21:26 46 *************************** 80 2019-09-10 21:27 47 **************************** 81 2019-09-10 21:28 49 ****************************** 82 2019-09-10 21:29 47 **************************** ... ..( 8 skipped). .. **************************** 91 2019-09-10 21:38 47 **************************** 92 2019-09-10 21:39 34 *************** 93 2019-09-10 21:40 36 ***************** 94 2019-09-10 21:41 38 ******************* 95 2019-09-10 21:42 38 ******************* 96 2019-09-10 21:43 39 ******************** 97 2019-09-10 21:44 39 ******************** 98 2019-09-10 21:45 41 ********************** 99 2019-09-10 21:46 41 ********************** 100 2019-09-10 21:47 41 ********************** 101 2019-09-10 21:48 43 ************************ ... ..( 2 skipped). .. ************************ 104 2019-09-10 21:51 43 ************************ 105 2019-09-10 21:52 28 ********* 106 2019-09-10 21:53 31 ************ 107 2019-09-10 21:54 33 ************** 108 2019-09-10 21:55 34 *************** 109 2019-09-10 21:56 36 ***************** 110 2019-09-10 21:57 36 ***************** 111 2019-09-10 21:58 38 ******************* 112 2019-09-10 21:59 39 ******************** 113 2019-09-10 22:00 39 ******************** 114 2019-09-10 22:01 41 ********************** 115 2019-09-10 22:02 46 *************************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 369 --- Lifetime Power-On Resets 0x01 0x010 4 542 --- Power-on Hours 0x01 0x018 6 556448955 --- Logical Sectors Written 0x01 0x020 6 11280395 --- Number of Write Commands 0x01 0x028 6 639502298 --- Logical Sectors Read 0x01 0x030 6 8952129 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 24 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1292 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC