/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-40-generic] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Travelstar 5K500.B Device Model: Hitachi HTS545050B9A300 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: PB4OC64G User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Mon Jul 13 08:50:24 2020 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 645) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 158) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 141 141 033 - 1 4 Start_Stop_Count -O--C- 090 090 000 - 16442 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 1 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 088 088 000 - 5399 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 097 097 000 - 4753 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 2507407426 193 Load_Cycle_Count -O--C- 084 084 000 - 164612 194 Temperature_Celsius -O---- 166 166 000 - 33 (Min/Max -5/50) 196 Reallocated_Event_Count -O--CK 100 100 000 - 1 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 30/33 Celsius Lifetime Min/Max Temperature: -5/50 Celsius Specified Max Operating Temperature: 33 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 478 (104) Index Estimated Time Temperature Celsius 105 2020-07-13 00:53 30 *********** ... ..( 43 skipped). .. *********** 149 2020-07-13 01:37 30 *********** 150 2020-07-13 01:38 31 ************ 151 2020-07-13 01:39 30 *********** ... ..( 18 skipped). .. *********** 170 2020-07-13 01:58 30 *********** 171 2020-07-13 01:59 31 ************ 172 2020-07-13 02:00 31 ************ 173 2020-07-13 02:01 31 ************ 174 2020-07-13 02:02 30 *********** ... ..( 79 skipped). .. *********** 254 2020-07-13 03:22 30 *********** 255 2020-07-13 03:23 31 ************ 256 2020-07-13 03:24 31 ************ 257 2020-07-13 03:25 32 ************* 258 2020-07-13 03:26 32 ************* 259 2020-07-13 03:27 32 ************* 260 2020-07-13 03:28 33 ************** 261 2020-07-13 03:29 33 ************** 262 2020-07-13 03:30 33 ************** 263 2020-07-13 03:31 32 ************* ... ..( 12 skipped). .. ************* 276 2020-07-13 03:44 32 ************* 277 2020-07-13 03:45 31 ************ ... ..( 49 skipped). .. ************ 327 2020-07-13 04:35 31 ************ 328 2020-07-13 04:36 30 *********** ... ..( 8 skipped). .. *********** 337 2020-07-13 04:45 30 *********** 338 2020-07-13 04:46 31 ************ ... ..( 69 skipped). .. ************ 408 2020-07-13 05:56 31 ************ 409 2020-07-13 05:57 32 ************* 410 2020-07-13 05:58 31 ************ ... ..( 85 skipped). .. ************ 18 2020-07-13 07:24 31 ************ 19 2020-07-13 07:25 32 ************* 20 2020-07-13 07:26 32 ************* 21 2020-07-13 07:27 31 ************ ... ..( 10 skipped). .. ************ 32 2020-07-13 07:38 31 ************ 33 2020-07-13 07:39 32 ************* 34 2020-07-13 07:40 31 ************ ... ..( 2 skipped). .. ************ 37 2020-07-13 07:43 31 ************ 38 2020-07-13 07:44 32 ************* 39 2020-07-13 07:45 31 ************ ... ..( 36 skipped). .. ************ 76 2020-07-13 08:22 31 ************ 77 2020-07-13 08:23 32 ************* ... ..( 22 skipped). .. ************* 100 2020-07-13 08:46 32 ************* 101 2020-07-13 08:47 33 ************** ... ..( 2 skipped). .. ************** 104 2020-07-13 08:50 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0009 2 65535+ Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS