/dev/sda === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.9 Device Model: ST3250624AS Serial Number: -- Firmware Version: 3.AAH User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Thu Sep 19 17:05:42 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 100) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 090 006 - 68306610 3 Spin_Up_Time PO---- 091 090 000 - 0 4 Start_Stop_Count -O--CK 087 087 020 - 13341 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 084 060 030 - 252256148 9 Power_On_Hours -O--CK 086 086 000 - 12732 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 094 094 020 - 6211 187 Reported_Uncorrect -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 069 047 045 - 31 (Min/Max 29/31) 194 Temperature_Celsius -O---K 031 053 000 - 31 (0 16 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 051 046 000 - 15778676 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 4 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4 [3] occurred at disk power-on lifetime: 12093 hours (503 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 73 5b 73 e0 00 Error: UNC at LBA = 0xe8735b73 = 3899874163 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 e8 00 5b 6f e0 00 00:01:15.758 READ DMA EXT 25 00 00 00 08 00 00 e8 00 5b 6f e0 00 00:01:15.758 READ DMA EXT 25 00 00 00 08 00 00 c5 00 5b ff e0 00 00:01:23.698 READ DMA EXT 25 00 00 00 08 00 00 c6 00 5b 07 e0 00 00:01:21.794 READ DMA EXT 25 00 00 00 08 00 00 c5 00 5b f7 e0 00 00:01:21.794 READ DMA EXT Error 3 [2] occurred at disk power-on lifetime: 12093 hours (503 days + 21 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 73 5b 73 e0 00 Error: UNC at LBA = 0xe8735b73 = 3899874163 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 e8 00 5b 6f e0 00 00:01:15.758 READ DMA EXT 25 00 00 00 08 00 00 c5 00 5b ff e0 00 00:01:15.758 READ DMA EXT 25 00 00 00 08 00 00 c6 00 5b 07 e0 00 00:01:15.563 READ DMA EXT 25 00 00 00 08 00 00 c5 00 5b f7 e0 00 00:01:21.794 READ DMA EXT 25 00 00 00 08 00 00 c5 00 5b ef e0 00 00:01:21.794 READ DMA EXT Error 2 [1] occurred at disk power-on lifetime: 12092 hours (503 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 73 5b 73 e0 00 Error: UNC at LBA = 0xe8735b73 = 3899874163 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 e8 00 5b 6f e0 00 00:02:20.905 READ DMA EXT 25 00 00 00 08 00 00 e8 00 5b 6f e0 00 00:02:20.905 READ DMA EXT 25 00 00 00 08 00 00 e8 00 5b 67 e0 00 00:02:20.905 READ DMA EXT 25 00 00 00 08 00 00 e8 00 5b 5f e0 00 00:02:20.905 READ DMA EXT 25 00 00 00 08 00 00 e8 00 5b 57 e0 00 00:02:20.905 READ DMA EXT Error 1 [0] occurred at disk power-on lifetime: 12092 hours (503 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 e8 73 5b 73 e0 00 Error: UNC at LBA = 0xe8735b73 = 3899874163 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 08 00 00 e8 00 5b 6f e0 00 00:02:20.905 READ DMA EXT 25 00 00 00 08 00 00 e8 00 5b 67 e0 00 00:02:20.905 READ DMA EXT 25 00 00 00 08 00 00 e8 00 5b 5f e0 00 00:02:20.905 READ DMA EXT 25 00 00 00 08 00 00 e8 00 5b 57 e0 00 00:02:20.905 READ DMA EXT 25 00 00 00 08 00 00 e8 00 5b 4f e0 00 00:02:20.905 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 18 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb === START OF INFORMATION SECTION === Model Family: Toshiba 2.5" HDD MK..52GSX Device Model: TOSHIBA MK3252GSX Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: LV010M User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 1.5 Gb/s Local Time is: Thu Sep 19 17:05:42 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 25) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 135) minutes. SCT capabilities: (0x0039) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 096 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 1578 4 Start_Stop_Count -O--CK 100 100 000 - 24396 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 24 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 042 042 000 - 23248 10 Spin_Retry_Count PO--CK 253 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 15464 191 G-Sense_Error_Rate -O--CK 100 100 000 - 1162 192 Power-Off_Retract_Count -O--CK 098 098 000 - 1180970 193 Load_Cycle_Count -O--CK 077 077 000 - 231326 194 Temperature_Celsius -O---K 100 100 000 - 28 (Min/Max 16/69) 196 Reallocated_Event_Count -O--CK 100 100 000 - 2 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 59 220 Disk_Shift -O---- 100 100 000 - 48 222 Loaded_Hours -O--CK 050 050 000 - 20180 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 362 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 3860 (device log contains only the most recent 256 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3860 [19] occurred at disk power-on lifetime: 23242 hours (968 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 19 46 53 df e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x194653df = 424039391 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 28 00 00 19 46 53 b8 e0 00 00:59:58.424 WRITE DMA EXT 25 00 00 00 20 00 00 0d 43 b5 d0 e0 00 00:59:58.406 READ DMA EXT 25 00 00 00 20 00 00 13 06 f0 b0 e0 00 00:59:58.146 READ DMA EXT 25 00 00 00 20 00 00 0d 43 b5 b0 e0 00 00:59:57.976 READ DMA EXT 25 00 00 00 20 00 00 13 06 f0 90 e0 00 00:59:57.876 READ DMA EXT Error 3859 [18] occurred at disk power-on lifetime: 23242 hours (968 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 10 19 d0 a7 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x1019d0a7 = 270127271 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 10 19 cf a8 e0 00 00:31:22.498 WRITE DMA EXT 35 00 00 01 00 00 00 10 19 ce a8 e0 00 00:31:22.496 WRITE DMA EXT 35 00 00 01 00 00 00 10 19 cd a8 e0 00 00:31:22.481 WRITE DMA EXT 35 00 00 01 00 00 00 10 19 cc a8 e0 00 00:31:22.479 WRITE DMA EXT 35 00 00 01 00 00 00 10 19 cb a8 e0 00 00:31:22.477 WRITE DMA EXT Error 3858 [17] occurred at disk power-on lifetime: 23242 hours (968 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 1a 17 ad 37 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x1a17ad37 = 437759287 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 1a 17 ac 38 e0 00 00:31:01.468 WRITE DMA EXT 35 00 00 01 00 00 00 1a 17 ab 38 e0 00 00:31:01.466 WRITE DMA EXT 35 00 00 01 00 00 00 1a 17 aa 38 e0 00 00:31:01.461 WRITE DMA EXT 35 00 00 01 00 00 00 1a 17 a9 38 e0 00 00:31:01.459 WRITE DMA EXT 35 00 00 01 00 00 00 1a 17 a8 38 e0 00 00:31:01.457 WRITE DMA EXT Error 3857 [16] occurred at disk power-on lifetime: 23242 hours (968 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 1a e3 00 a7 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x1ae300a7 = 451084455 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 1a e2 ff a8 e0 00 00:30:27.516 WRITE DMA EXT 35 00 00 01 00 00 00 1a e2 fe a8 e0 00 00:30:27.514 WRITE DMA EXT 35 00 00 01 00 00 00 1a e2 fd a8 e0 00 00:30:27.499 WRITE DMA EXT 35 00 00 01 00 00 00 1a e2 fc a8 e0 00 00:30:27.496 WRITE DMA EXT 35 00 00 01 00 00 00 1a e2 fb a8 e0 00 00:30:27.494 WRITE DMA EXT Error 3856 [15] occurred at disk power-on lifetime: 23242 hours (968 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 19 2b 06 67 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x192b0667 = 422250087 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 19 2b 05 68 e0 00 00:30:10.503 WRITE DMA EXT 35 00 00 01 00 00 00 19 2b 04 68 e0 00 00:30:10.502 WRITE DMA EXT 35 00 00 01 00 00 00 19 2b 03 68 e0 00 00:30:10.501 WRITE DMA EXT 35 00 00 01 00 00 00 19 2b 02 68 e0 00 00:30:10.500 WRITE DMA EXT 35 00 00 01 00 00 00 19 2b 01 68 e0 00 00:30:10.498 WRITE DMA EXT Error 3855 [14] occurred at disk power-on lifetime: 23242 hours (968 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 17 b7 d9 77 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x17b7d977 = 397924727 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 17 b7 d8 78 e0 00 00:29:28.982 WRITE DMA EXT 35 00 00 01 00 00 00 17 b7 d7 78 e0 00 00:29:28.980 WRITE DMA EXT 35 00 00 01 00 00 00 17 b7 d6 78 e0 00 00:29:28.977 WRITE DMA EXT 35 00 00 01 00 00 00 17 b7 d5 78 e0 00 00:29:28.962 WRITE DMA EXT 35 00 00 01 00 00 00 17 b7 d4 78 e0 00 00:29:28.960 WRITE DMA EXT Error 3854 [13] occurred at disk power-on lifetime: 23242 hours (968 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 06 fb c9 ff e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x06fbc9ff = 117164543 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 01 00 00 00 06 fb c9 00 e0 00 00:29:01.590 WRITE DMA EXT 35 00 00 01 00 00 00 06 fb c8 00 e0 00 00:29:01.588 WRITE DMA EXT 35 00 00 01 00 00 00 06 fb c7 00 e0 00 00:29:01.584 WRITE DMA EXT 35 00 00 01 00 00 00 06 fb c6 00 e0 00 00:29:01.582 WRITE DMA EXT 35 00 00 01 00 00 00 06 fb c5 00 e0 00 00:29:01.580 WRITE DMA EXT Error 3853 [12] occurred at disk power-on lifetime: 23242 hours (968 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 19 0b ff 27 e0 00 Error: ICRC, ABRT 1 sectors at LBA = 0x190bff27 = 420216615 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 50 00 00 19 0b fe d8 e0 00 00:28:08.590 WRITE DMA EXT 35 00 00 00 38 00 00 19 0b fe a0 e0 00 00:28:08.589 WRITE DMA EXT 25 00 00 00 80 00 00 1b 8a cf 10 e0 00 00:28:08.588 READ DMA EXT 35 00 00 00 88 00 00 19 0b fe 20 e0 00 00:28:08.588 WRITE DMA EXT 25 00 00 00 30 00 00 1b 8a ce e0 e0 00 00:28:08.586 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Aborted by host 90% 22237 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Max Temperature: 28 Celsius Lifetime Max Temperature: 69 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/55 Celsius Min/Max Temperature Limit: 5/55 Celsius Temperature History Size (Index): 478 (284) Index Estimated Time Temperature Celsius 285 2019-09-19 09:08 ? - 286 2019-09-19 09:09 ? - 287 2019-09-19 09:10 23 **** 288 2019-09-19 09:11 23 **** 289 2019-09-19 09:12 23 **** 290 2019-09-19 09:13 24 ***** 291 2019-09-19 09:14 24 ***** 292 2019-09-19 09:15 25 ****** ... ..( 2 skipped). .. ****** 295 2019-09-19 09:18 25 ****** 296 2019-09-19 09:19 26 ******* ... ..( 5 skipped). .. ******* 302 2019-09-19 09:25 26 ******* 303 2019-09-19 09:26 27 ******** ... ..( 5 skipped). .. ******** 309 2019-09-19 09:32 27 ******** 310 2019-09-19 09:33 28 ********* ... ..( 10 skipped). .. ********* 321 2019-09-19 09:44 28 ********* 322 2019-09-19 09:45 29 ********** ... ..( 2 skipped). .. ********** 325 2019-09-19 09:48 29 ********** 326 2019-09-19 09:49 ? - 327 2019-09-19 09:50 28 ********* 328 2019-09-19 09:51 29 ********** 329 2019-09-19 09:52 29 ********** 330 2019-09-19 09:53 31 ************ 331 2019-09-19 09:54 32 ************* 332 2019-09-19 09:55 32 ************* 333 2019-09-19 09:56 33 ************** 334 2019-09-19 09:57 32 ************* 335 2019-09-19 09:58 32 ************* 336 2019-09-19 09:59 ? - 337 2019-09-19 10:00 28 ********* ... ..( 4 skipped). .. ********* 342 2019-09-19 10:05 28 ********* 343 2019-09-19 10:06 29 ********** ... ..( 52 skipped). .. ********** 396 2019-09-19 10:59 29 ********** 397 2019-09-19 11:00 30 *********** 398 2019-09-19 11:01 30 *********** 399 2019-09-19 11:02 ? - 400 2019-09-19 11:03 28 ********* 401 2019-09-19 11:04 ? - 402 2019-09-19 11:05 23 **** 403 2019-09-19 11:06 23 **** 404 2019-09-19 11:07 24 ***** ... ..( 2 skipped). .. ***** 407 2019-09-19 11:10 24 ***** 408 2019-09-19 11:11 25 ****** 409 2019-09-19 11:12 25 ****** 410 2019-09-19 11:13 26 ******* 411 2019-09-19 11:14 26 ******* 412 2019-09-19 11:15 26 ******* 413 2019-09-19 11:16 28 ********* 414 2019-09-19 11:17 29 ********** 415 2019-09-19 11:18 30 *********** 416 2019-09-19 11:19 30 *********** 417 2019-09-19 11:20 31 ************ 418 2019-09-19 11:21 32 ************* 419 2019-09-19 11:22 32 ************* 420 2019-09-19 11:23 32 ************* 421 2019-09-19 11:24 33 ************** ... ..( 2 skipped). .. ************** 424 2019-09-19 11:27 33 ************** 425 2019-09-19 11:28 34 *************** 426 2019-09-19 11:29 34 *************** 427 2019-09-19 11:30 35 **************** 428 2019-09-19 11:31 35 **************** 429 2019-09-19 11:32 35 **************** 430 2019-09-19 11:33 34 *************** 431 2019-09-19 11:34 33 ************** 432 2019-09-19 11:35 33 ************** 433 2019-09-19 11:36 32 ************* 434 2019-09-19 11:37 32 ************* 435 2019-09-19 11:38 31 ************ 436 2019-09-19 11:39 31 ************ 437 2019-09-19 11:40 30 *********** 438 2019-09-19 11:41 30 *********** 439 2019-09-19 11:42 30 *********** 440 2019-09-19 11:43 31 ************ ... ..( 4 skipped). .. ************ 445 2019-09-19 11:48 31 ************ 446 2019-09-19 11:49 32 ************* ... ..( 3 skipped). .. ************* 450 2019-09-19 11:53 32 ************* 451 2019-09-19 11:54 31 ************ 452 2019-09-19 11:55 32 ************* ... ..( 5 skipped). .. ************* 458 2019-09-19 12:01 32 ************* 459 2019-09-19 12:02 33 ************** ... ..( 5 skipped). .. ************** 465 2019-09-19 12:08 33 ************** 466 2019-09-19 12:09 32 ************* 467 2019-09-19 12:10 33 ************** ... ..( 5 skipped). .. ************** 473 2019-09-19 12:16 33 ************** 474 2019-09-19 12:17 32 ************* 475 2019-09-19 12:18 32 ************* 476 2019-09-19 12:19 32 ************* 477 2019-09-19 12:20 31 ************ 0 2019-09-19 12:21 31 ************ 1 2019-09-19 12:22 31 ************ 2 2019-09-19 12:23 30 *********** ... ..( 13 skipped). .. *********** 16 2019-09-19 12:37 30 *********** 17 2019-09-19 12:38 ? - 18 2019-09-19 12:39 28 ********* ... ..( 4 skipped). .. ********* 23 2019-09-19 12:44 28 ********* 24 2019-09-19 12:45 29 ********** ... ..( 35 skipped). .. ********** 60 2019-09-19 13:21 29 ********** 61 2019-09-19 13:22 ? - 62 2019-09-19 13:23 28 ********* 63 2019-09-19 13:24 ? - 64 2019-09-19 13:25 23 **** 65 2019-09-19 13:26 24 ***** 66 2019-09-19 13:27 24 ***** 67 2019-09-19 13:28 24 ***** 68 2019-09-19 13:29 25 ****** 69 2019-09-19 13:30 25 ****** 70 2019-09-19 13:31 25 ****** 71 2019-09-19 13:32 26 ******* ... ..( 2 skipped). .. ******* 74 2019-09-19 13:35 26 ******* 75 2019-09-19 13:36 27 ******** 76 2019-09-19 13:37 27 ******** 77 2019-09-19 13:38 27 ******** 78 2019-09-19 13:39 28 ********* ... ..( 3 skipped). .. ********* 82 2019-09-19 13:43 28 ********* 83 2019-09-19 13:44 29 ********** ... ..( 4 skipped). .. ********** 88 2019-09-19 13:49 29 ********** 89 2019-09-19 13:50 28 ********* 90 2019-09-19 13:51 29 ********** ... ..( 41 skipped). .. ********** 132 2019-09-19 14:33 29 ********** 133 2019-09-19 14:34 28 ********* ... ..( 7 skipped). .. ********* 141 2019-09-19 14:42 28 ********* 142 2019-09-19 14:43 29 ********** 143 2019-09-19 14:44 29 ********** 144 2019-09-19 14:45 ? - 145 2019-09-19 14:46 28 ********* ... ..( 3 skipped). .. ********* 149 2019-09-19 14:50 28 ********* 150 2019-09-19 14:51 29 ********** ... ..( 54 skipped). .. ********** 205 2019-09-19 15:46 29 ********** 206 2019-09-19 15:47 28 ********* 207 2019-09-19 15:48 28 ********* 208 2019-09-19 15:49 ? - 209 2019-09-19 15:50 ? - 210 2019-09-19 15:51 22 *** 211 2019-09-19 15:52 22 *** 212 2019-09-19 15:53 23 **** 213 2019-09-19 15:54 23 **** 214 2019-09-19 15:55 23 **** 215 2019-09-19 15:56 24 ***** 216 2019-09-19 15:57 24 ***** 217 2019-09-19 15:58 24 ***** 218 2019-09-19 15:59 25 ****** ... ..( 2 skipped). .. ****** 221 2019-09-19 16:02 25 ****** 222 2019-09-19 16:03 26 ******* ... ..( 7 skipped). .. ******* 230 2019-09-19 16:11 26 ******* 231 2019-09-19 16:12 27 ******** ... ..( 9 skipped). .. ******** 241 2019-09-19 16:22 27 ******** 242 2019-09-19 16:23 ? - 243 2019-09-19 16:24 26 ******* 244 2019-09-19 16:25 26 ******* 245 2019-09-19 16:26 ? - 246 2019-09-19 16:27 27 ******** 247 2019-09-19 16:28 ? - 248 2019-09-19 16:29 28 ********* ... ..( 35 skipped). .. ********* 284 2019-09-19 17:05 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 7 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdc === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.10 Device Model: ST3320620AS Serial Number: -- Firmware Version: 3.AAK User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Thu Sep 19 17:05:42 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 115) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 108 099 006 - 20113419 3 Spin_Up_Time PO---- 096 095 000 - 0 4 Start_Stop_Count -O--CK 093 093 020 - 7875 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 087 061 030 - 496416427 9 Power_On_Hours -O--CK 083 083 000 - 15335 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 094 094 020 - 7122 187 Reported_Uncorrect -O--CK 001 001 000 - 351 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 069 031 045 Past 31 (Min/Max 28/31) 194 Temperature_Celsius -O---K 031 069 000 - 31 (0 18 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 072 056 000 - 144130494 197 Current_Pending_Sector -O--C- 001 001 000 - 4294967294 198 Offline_Uncorrectable ----C- 001 001 000 - 4294967294 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 098 251 000 - 2 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23040 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 434 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 434 [13] occurred at disk power-on lifetime: 15215 hours (633 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 bf d6 5d d6 e0 00 Error: UNC at LBA = 0xbfd65dd6 = 3218496982 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3d 00 00 bf 00 5d bb e0 00 00:42:10.024 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b9 e0 00 00:42:10.010 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b7 e0 00 00:42:10.001 READ DMA EXT 25 00 00 00 08 00 00 00 00 60 7f e0 00 00:42:10.001 READ DMA EXT 25 00 00 00 08 00 00 60 00 5e 37 e0 00 00:42:09.999 READ DMA EXT Error 433 [12] occurred at disk power-on lifetime: 15205 hours (633 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 bf d6 5d d6 e0 00 Error: UNC at LBA = 0xbfd65dd6 = 3218496982 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3d 00 00 bf 00 5d bb e0 00 00:00:36.128 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b9 e0 00 00:00:36.126 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b7 e0 00 00:00:36.124 READ DMA EXT 25 00 00 00 08 00 00 00 00 60 7f e0 00 00:00:36.122 READ DMA EXT 25 00 00 00 08 00 00 60 00 5e 37 e0 00 00:00:36.192 READ DMA EXT Error 432 [11] occurred at disk power-on lifetime: 15224 hours (634 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 bf d6 5d d6 e0 00 Error: UNC at LBA = 0xbfd65dd6 = 3218496982 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3d 00 00 bf 00 5d bb e0 00 00:00:39.244 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b9 e0 00 00:00:39.242 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b7 e0 00 00:00:39.241 READ DMA EXT 25 00 00 00 08 00 00 00 00 60 7f e0 00 00:00:39.239 READ DMA EXT 25 00 00 00 08 00 00 60 00 5e 37 e0 00 00:00:39.307 READ DMA EXT Error 431 [10] occurred at disk power-on lifetime: 15218 hours (634 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 bf d6 5d d6 e0 00 Error: UNC at LBA = 0xbfd65dd6 = 3218496982 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3d 00 00 bf 00 5d bb e0 00 00:00:38.089 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b9 e0 00 00:00:38.089 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b7 e0 00 00:00:38.078 READ DMA EXT 25 00 00 00 08 00 00 00 00 60 7f e0 00 00:00:38.063 READ DMA EXT 25 00 00 00 08 00 00 60 00 5e 37 e0 00 00:00:38.049 READ DMA EXT Error 430 [9] occurred at disk power-on lifetime: 15215 hours (633 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 bf d6 5d d6 e0 00 Error: UNC at LBA = 0xbfd65dd6 = 3218496982 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3d 00 00 bf 00 5d bb e0 00 00:42:10.024 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b9 e0 00 00:42:10.010 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b7 e0 00 00:42:10.001 READ DMA EXT 25 00 00 00 08 00 00 00 00 60 7f e0 00 00:42:10.001 READ DMA EXT 25 00 00 00 08 00 00 60 00 5e 37 e0 00 00:42:09.999 READ DMA EXT Error 429 [8] occurred at disk power-on lifetime: 15205 hours (633 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 bf d6 5d d6 e0 00 Error: UNC at LBA = 0xbfd65dd6 = 3218496982 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3d 00 00 bf 00 5d bb e0 00 00:00:36.128 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b9 e0 00 00:00:36.126 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b7 e0 00 00:00:36.124 READ DMA EXT 25 00 00 00 08 00 00 00 00 60 7f e0 00 00:00:36.122 READ DMA EXT 25 00 00 00 08 00 00 60 00 5e 37 e0 00 00:00:36.192 READ DMA EXT Error 428 [7] occurred at disk power-on lifetime: 15224 hours (634 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 bf d6 5d d6 e0 00 Error: UNC at LBA = 0xbfd65dd6 = 3218496982 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3d 00 00 bf 00 5d bb e0 00 00:00:39.244 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b9 e0 00 00:00:39.242 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b7 e0 00 00:00:39.241 READ DMA EXT 25 00 00 00 08 00 00 00 00 60 7f e0 00 00:00:39.239 READ DMA EXT 25 00 00 00 08 00 00 60 00 5e 37 e0 00 00:00:39.307 READ DMA EXT Error 427 [6] occurred at disk power-on lifetime: 15218 hours (634 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 bf d6 5d d6 e0 00 Error: UNC at LBA = 0xbfd65dd6 = 3218496982 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 00 3d 00 00 bf 00 5d bb e0 00 00:00:38.089 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b9 e0 00 00:00:38.089 READ DMA EXT 25 00 00 00 02 00 00 bf 00 5d b7 e0 00 00:00:38.078 READ DMA EXT 25 00 00 00 08 00 00 00 00 60 7f e0 00 00:00:38.063 READ DMA EXT 25 00 00 00 08 00 00 60 00 5e 37 e0 00 00:00:38.049 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 16 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdd === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Device Model: WDC WD800BB-56JKC0 Serial Number: -- Firmware Version: 05.01C05 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 (minor revision not indicated) Local Time is: Thu Sep 19 17:05:43 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 128 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Unknown SCT Status format version 1, should be 2 or 3. Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2460) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 35) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0 3 Spin_Up_Time PO---- 168 159 021 - 2591 4 Start_Stop_Count -O--CK 094 094 000 - 6330 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate POSR-- 200 200 051 - 0 9 Power_On_Hours -O--CK 082 082 000 - 13762 10 Spin_Retry_Count PO--C- 100 100 051 - 0 11 Calibration_Retry_Count -O--C- 100 100 051 - 0 12 Power_Cycle_Count -O--CK 095 095 000 - 5839 194 Temperature_Celsius -O---K 112 074 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--C- 200 200 000 - 0 198 Offline_Uncorrectable ----C- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 5 200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error badly formed scsi parameters General Purpose Log Directory not supported SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Unknown SCT Status format version 1, should be 2 or 3. Unknown SCT Status format version 1, should be 2 or 3. SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported /dev/sde === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus Device Model: ST380011A Serial Number: -- Firmware Version: 3.06 User Capacity: 80,026,361,856 bytes [80.0 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-6 T13/1410D revision 2 Local Time is: Thu Sep 19 17:05:43 2019 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 58) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 064 052 006 - 88997543 3 Spin_Up_Time PO---- 099 098 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 403 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 1 7 Seek_Error_Rate POSR-- 088 060 030 - 736421854 9 Power_On_Hours -O--CK 080 080 000 - 17986 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 097 020 - 4006 194 Temperature_Celsius -O---K 027 056 000 - 27 195 Hardware_ECC_Recovered -O-RC- 064 052 000 - 88997543 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 186 000 - 32 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory not supported SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 SL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x20 SL R/O 1 Streaming performance log [OBS-8] 0x21 SL R/O 1 Write stream error log 0x22 SL R/O 1 Read stream error log 0x23 SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f SL R/W 16 Host vendor specific log 0xa0 SL VS 1 Device vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa2 SL VS 101 Device vendor specific log 0xa8 SL VS 20 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 ATA Error Count: 26 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 26 occurred at disk power-on lifetime: 17687 hours (736 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 4e 4f ae 44 Error: ICRC, ABRT 1 sectors at LBA = 0x04ae4f4e = 78532430 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 80 cf 4e ae 44 00 00:56:03.968 READ DMA ca 00 80 e7 24 0b 43 00 00:56:03.809 WRITE DMA ca 00 80 e7 24 0b 43 00 00:56:03.807 WRITE DMA ca 00 80 e7 24 0b 43 00 00:56:03.788 WRITE DMA ca 00 80 e7 24 0b 43 00 00:56:03.786 WRITE DMA Error 25 occurred at disk power-on lifetime: 17682 hours (736 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 40 00 60 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00600040 = 6291520 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 20 02 3f 00 60 e0 00 00:01:03.460 READ DMA EXT c6 20 10 01 00 00 ef 00 00:01:03.457 SET MULTIPLE MODE 91 20 3f 01 00 00 ef 00 00:00:25.960 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 20 01 01 00 00 e1 00 00:00:25.383 RECALIBRATE [OBS-4] 00 00 02 00 00 00 00 04 00:00:25.372 NOP [Abort queued commands] Error 24 occurred at disk power-on lifetime: 17682 hours (736 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 40 00 60 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00600040 = 6291520 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 20 02 3f 00 60 e0 00 00:01:03.460 READ DMA EXT 25 20 01 3f 00 00 e0 00 00:01:03.457 READ DMA EXT 25 20 01 00 00 00 e0 00 00:00:25.960 READ DMA EXT 25 20 01 00 00 00 e0 00 00:00:25.383 READ DMA EXT 25 20 01 00 00 00 e0 00 00:00:25.372 READ DMA EXT Error 23 occurred at disk power-on lifetime: 17682 hours (736 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 40 00 60 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00600040 = 6291520 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 20 02 3f 00 60 e0 00 00:01:08.624 READ DMA EXT c6 20 10 01 00 00 ef 00 00:01:10.691 SET MULTIPLE MODE 91 20 3f 01 00 00 ef 00 00:01:10.690 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 20 01 01 00 00 e1 00 00:01:10.690 RECALIBRATE [OBS-4] 00 00 02 00 00 00 00 04 00:01:10.690 NOP [Abort queued commands] Error 22 occurred at disk power-on lifetime: 17682 hours (736 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 40 00 60 e0 Error: ICRC, ABRT 1 sectors at LBA = 0x00600040 = 6291520 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 20 02 3f 00 60 e0 00 00:01:08.624 READ DMA EXT c6 20 10 01 00 00 ef 00 00:01:07.751 SET MULTIPLE MODE 91 20 3f 01 00 00 ef 00 00:01:07.750 INITIALIZE DEVICE PARAMETERS [OBS-6] 10 20 01 01 00 00 e1 00 00:01:07.750 RECALIBRATE [OBS-4] 00 00 27 00 00 00 00 04 00:01:07.750 NOP [Abort queued commands] SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported