/dev/sda smartctl 7.3 2022-02-28 r5338 [x86_64-linux-5.18.12-desktop-3omv4090] (OpenMandriva Lx 7.3-2) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: -- LU WWN Device Id: 5 0004cf ... Firmware Version: 2BA30001 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Aug 1 08:01:36 2022 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (12900) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 215) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 2 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 092 087 025 - 2542 4 Start_Stop_Count -O--CK 092 092 000 - 8162 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 16645 10 Spin_Retry_Count -O--CK 252 252 051 - 0 12 Power_Cycle_Count -O--CK 093 093 000 - 7556 191 G-Sense_Error_Rate -O---K 100 100 000 - 284 192 Power-Off_Retract_Count -O---K 100 100 000 - 61 194 Temperature_Celsius -O---- 064 056 000 - 33 (Min/Max 12/45) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 12727 223 Load_Retry_Count -O--CK 095 095 000 - 5444 225 Load_Cycle_Count -O--CK 013 013 000 - 882203 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 20/33 Celsius Lifetime Min/Max Temperature: 12/45 Celsius Specified Max Operating Temperature: 80 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (27) Index Estimated Time Temperature Celsius 28 2022-07-31 21:25 33 ************** 29 2022-07-31 21:30 35 **************** ... ..( 2 skipped). .. **************** 32 2022-07-31 21:45 35 **************** 33 2022-07-31 21:50 36 ***************** 34 2022-07-31 21:55 36 ***************** 35 2022-07-31 22:00 35 **************** 36 2022-07-31 22:05 35 **************** 37 2022-07-31 22:10 36 ***************** 38 2022-07-31 22:15 37 ****************** ... ..( 2 skipped). .. ****************** 41 2022-07-31 22:30 37 ****************** 42 2022-07-31 22:35 38 ******************* ... ..( 4 skipped). .. ******************* 47 2022-07-31 23:00 38 ******************* 48 2022-07-31 23:05 39 ******************** ... ..( 4 skipped). .. ******************** 53 2022-07-31 23:30 39 ******************** 54 2022-07-31 23:35 37 ****************** 55 2022-07-31 23:40 35 **************** 56 2022-07-31 23:45 35 **************** 57 2022-07-31 23:50 29 ********** 58 2022-07-31 23:55 31 ************ 59 2022-08-01 00:00 33 ************** 60 2022-08-01 00:05 34 *************** 61 2022-08-01 00:10 35 **************** 62 2022-08-01 00:15 36 ***************** 63 2022-08-01 00:20 36 ***************** 64 2022-08-01 00:25 37 ****************** ... ..( 6 skipped). .. ****************** 71 2022-08-01 01:00 37 ****************** 72 2022-08-01 01:05 38 ******************* 73 2022-08-01 01:10 38 ******************* 74 2022-08-01 01:15 38 ******************* 75 2022-08-01 01:20 37 ****************** 76 2022-08-01 01:25 38 ******************* 77 2022-08-01 01:30 37 ****************** 78 2022-08-01 01:35 37 ****************** 79 2022-08-01 01:40 37 ****************** 80 2022-08-01 01:45 36 ***************** 81 2022-08-01 01:50 36 ***************** 82 2022-08-01 01:55 36 ***************** 83 2022-08-01 02:00 37 ****************** 84 2022-08-01 02:05 37 ****************** 85 2022-08-01 02:10 36 ***************** ... ..( 2 skipped). .. ***************** 88 2022-08-01 02:25 36 ***************** 89 2022-08-01 02:30 37 ****************** 90 2022-08-01 02:35 37 ****************** 91 2022-08-01 02:40 37 ****************** 92 2022-08-01 02:45 24 ***** 93 2022-08-01 02:50 26 ******* 94 2022-08-01 02:55 29 ********** 95 2022-08-01 03:00 31 ************ 96 2022-08-01 03:05 33 ************** 97 2022-08-01 03:10 33 ************** 98 2022-08-01 03:15 34 *************** 99 2022-08-01 03:20 35 **************** 100 2022-08-01 03:25 35 **************** 101 2022-08-01 03:30 35 **************** 102 2022-08-01 03:35 34 *************** 103 2022-08-01 03:40 27 ******** 104 2022-08-01 03:45 29 ********** 105 2022-08-01 03:50 30 *********** 106 2022-08-01 03:55 33 ************** 107 2022-08-01 04:00 34 *************** 108 2022-08-01 04:05 34 *************** 109 2022-08-01 04:10 36 ***************** 110 2022-08-01 04:15 37 ****************** ... ..( 2 skipped). .. ****************** 113 2022-08-01 04:30 37 ****************** 114 2022-08-01 04:35 35 **************** 115 2022-08-01 04:40 34 *************** ... ..( 3 skipped). .. *************** 119 2022-08-01 05:00 34 *************** 120 2022-08-01 05:05 28 ********* 121 2022-08-01 05:10 32 ************* 122 2022-08-01 05:15 33 ************** 123 2022-08-01 05:20 35 **************** 124 2022-08-01 05:25 35 **************** 125 2022-08-01 05:30 35 **************** 126 2022-08-01 05:35 36 ***************** 127 2022-08-01 05:40 36 ***************** 0 2022-08-01 05:45 35 **************** ... ..( 2 skipped). .. **************** 3 2022-08-01 06:00 35 **************** 4 2022-08-01 06:05 36 ***************** ... ..( 4 skipped). .. ***************** 9 2022-08-01 06:30 36 ***************** 10 2022-08-01 06:35 35 **************** 11 2022-08-01 06:40 36 ***************** 12 2022-08-01 06:45 37 ****************** 13 2022-08-01 06:50 37 ****************** 14 2022-08-01 06:55 37 ****************** 15 2022-08-01 07:00 27 ******** 16 2022-08-01 07:05 29 ********** 17 2022-08-01 07:10 31 ************ 18 2022-08-01 07:15 32 ************* 19 2022-08-01 07:20 33 ************** 20 2022-08-01 07:25 24 ***** 21 2022-08-01 07:30 26 ******* 22 2022-08-01 07:35 28 ********* 23 2022-08-01 07:40 28 ********* 24 2022-08-01 07:45 30 *********** 25 2022-08-01 07:50 31 ************ 26 2022-08-01 07:55 32 ************* 27 2022-08-01 08:00 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 15 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 11 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific