/dev/nvme0n1 === START OF INFORMATION SECTION === Model Number: KXG50ZNV256G TOSHIBA Serial Number: -- Firmware Version: AAHA4102 PCI Vendor/Subsystem ID: 0x1179 IEEE OUI Identifier: 0x00080d Total NVM Capacity: 256,060,514,304 [256 GB] Unallocated NVM Capacity: 0 Controller ID: 0 Number of Namespaces: 1 Namespace 1 Size/Capacity: 256,060,514,304 [256 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 00080d ... Local Time is: Sat Mar 7 09:13:40 2020 CET Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 78 Celsius Critical Comp. Temp. Threshold: 82 Celsius Namespace 1 Features (0x02): NA_Fields Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.00W - - 0 0 0 0 0 0 1 + 2.70W - - 1 1 1 1 0 0 2 + 1.30W - - 2 2 2 2 0 0 3 - 0.0500W - - 3 3 3 3 1500 1500 4 - 0.0050W - - 4 4 4 4 6000 14000 5 - 0.0030W - - 5 5 5 5 50000 80000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 2 1 - 4096 0 1 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 39 Celsius Available Spare: 100% Available Spare Threshold: 5% Percentage Used: 4% Data Units Read: 15,315,862 [7.84 TB] Data Units Written: 10,007,477 [5.12 TB] Host Read Commands: 160,245,478 Host Write Commands: 71,512,286 Controller Busy Time: 766 Power Cycles: 1,257 Power On Hours: 1,522 Unsafe Shutdowns: 181 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 39 Celsius Error Information (NVMe Log 0x01, max 128 entries) No Errors Logged /dev/sda === START OF INFORMATION SECTION === Model Family: HGST Travelstar 7K1000 Device Model: HGST HTS721010A9E630 Serial Number: -- LU WWN Device Id: 5 000cca ... Firmware Version: JB0OA3T0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Mar 7 09:13:40 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 181) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 062 - 0 2 Throughput_Performance P-S--K 159 100 040 - 101 3 Spin_Up_Time PO---K 119 100 033 - 2 4 Start_Stop_Count -O--CK 099 099 000 - 2021 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-K 100 100 067 - 0 8 Seek_Time_Performance P-S--K 138 100 040 - 34 9 Power_On_Hours -O--CK 097 097 000 - 1713 10 Spin_Retry_Count PO--CK 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1252 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 098 000 - 12058627 190 Airflow_Temperature_Cel -O---K 066 049 045 - 34 (Min/Max 20/34) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 9 192 Power-Off_Retract_Count -O--CK 100 100 000 - 5505108 193 Load_Cycle_Count -O--CK 100 100 000 - 4930 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 100 100 000 - 0 223 Load_Retry_Count -O-R-K 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 1597 - # 2 Short offline Completed without error 00% 1356 - # 3 Short offline Completed without error 00% 585 - # 4 Extended offline Aborted by host 90% 585 - # 5 Short offline Completed without error 00% 3 - # 6 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 20/34 Celsius Lifetime Min/Max Temperature: 15/51 Celsius Specified Max Operating Temperature: 32 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (74) Index Estimated Time Temperature Celsius 75 2020-03-07 07:06 35 **************** 76 2020-03-07 07:07 36 ***************** 77 2020-03-07 07:08 36 ***************** 78 2020-03-07 07:09 36 ***************** 79 2020-03-07 07:10 37 ****************** 80 2020-03-07 07:11 36 ***************** 81 2020-03-07 07:12 37 ****************** ... ..( 8 skipped). .. ****************** 90 2020-03-07 07:21 37 ****************** 91 2020-03-07 07:22 38 ******************* 92 2020-03-07 07:23 38 ******************* 93 2020-03-07 07:24 37 ****************** ... ..( 12 skipped). .. ****************** 106 2020-03-07 07:37 37 ****************** 107 2020-03-07 07:38 36 ***************** ... ..( 2 skipped). .. ***************** 110 2020-03-07 07:41 36 ***************** 111 2020-03-07 07:42 35 **************** 112 2020-03-07 07:43 35 **************** 113 2020-03-07 07:44 36 ***************** ... ..( 2 skipped). .. ***************** 116 2020-03-07 07:47 36 ***************** 117 2020-03-07 07:48 35 **************** 118 2020-03-07 07:49 ? - 119 2020-03-07 07:50 20 * 120 2020-03-07 07:51 21 ** ... ..( 2 skipped). .. ** 123 2020-03-07 07:54 21 ** 124 2020-03-07 07:55 22 *** 125 2020-03-07 07:56 22 *** 126 2020-03-07 07:57 22 *** 127 2020-03-07 07:58 23 **** ... ..( 2 skipped). .. **** 2 2020-03-07 08:01 23 **** 3 2020-03-07 08:02 24 ***** 4 2020-03-07 08:03 24 ***** 5 2020-03-07 08:04 24 ***** 6 2020-03-07 08:05 25 ****** 7 2020-03-07 08:06 25 ****** 8 2020-03-07 08:07 26 ******* 9 2020-03-07 08:08 26 ******* 10 2020-03-07 08:09 27 ******** 11 2020-03-07 08:10 28 ********* 12 2020-03-07 08:11 28 ********* 13 2020-03-07 08:12 28 ********* 14 2020-03-07 08:13 29 ********** ... ..( 2 skipped). .. ********** 17 2020-03-07 08:16 29 ********** 18 2020-03-07 08:17 30 *********** 19 2020-03-07 08:18 30 *********** 20 2020-03-07 08:19 30 *********** 21 2020-03-07 08:20 31 ************ ... ..( 3 skipped). .. ************ 25 2020-03-07 08:24 31 ************ 26 2020-03-07 08:25 32 ************* ... ..( 7 skipped). .. ************* 34 2020-03-07 08:33 32 ************* 35 2020-03-07 08:34 33 ************** ... ..( 11 skipped). .. ************** 47 2020-03-07 08:46 33 ************** 48 2020-03-07 08:47 34 *************** 49 2020-03-07 08:48 33 ************** 50 2020-03-07 08:49 34 *************** ... ..( 23 skipped). .. *************** 74 2020-03-07 09:13 34 *************** SCT Error Recovery Control: Read: 85 (8.5 seconds) Write: 85 (8.5 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 26 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS