/dev/sda === START OF INFORMATION SECTION === Model Family: OCZ/Toshiba Trion SSDs Device Model: TOSHIBA-TR150 Serial Number: -- LU WWN Device Id: 5 e83a97 ... Firmware Version: SAFZ12.3 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Nov 1 09:52:27 2019 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 30) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 9 Power_On_Hours -O--C- 100 100 000 - 6822 12 Power_Cycle_Count -O--C- 100 100 000 - 1748 167 SSD_Protect_Mode -O---K 100 100 000 - 0 168 SATA_PHY_Error_Count -O--C- 100 100 000 - 0 169 Bad_Block_Count PO---- 100 100 010 - 0 173 Erase_Count -O--C- 195 195 000 - 0 192 Unexpect_Power_Loss_Ct -O--C- 100 100 000 - 119 194 Temperature_Celsius PO---K 073 061 020 - 27 (Min/Max 17/39) 241 Host_Writes -O--CK 100 100 000 - 358656 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 1748 --- Lifetime Power-On Resets 0x01 0x010 4 6822 --- Power-on Hours 0x01 0x018 6 23504910699 --- Logical Sectors Written 0x01 0x020 6 382327693 --- Number of Write Commands 0x01 0x028 6 20285519040 --- Logical Sectors Read 0x01 0x030 6 304391818 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 51 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x010 1 32 --- Average Short Term Temperature 0x05 0x018 1 32 --- Average Long Term Temperature 0x05 0x020 1 50 --- Highest Temperature 0x05 0x028 1 5 --- Lowest Temperature 0x05 0x030 1 50 --- Highest Average Short Term Temperature 0x05 0x038 1 16 --- Lowest Average Short Term Temperature 0x05 0x040 1 50 --- Highest Average Long Term Temperature 0x05 0x048 1 16 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 50 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 5 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 6628 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 5 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 159613 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 7 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdb === START OF INFORMATION SECTION === Model Family: Toshiba P300 Device Model: TOSHIBA HDWD110 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MS2OA8J0 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Nov 1 09:52:27 2019 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7458) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 125) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 142 142 054 - 70 3 Spin_Up_Time POS--- 122 122 024 - 188 (Average 186) 4 Start_Stop_Count -O--C- 100 100 000 - 105 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 113 113 020 - 35 9 Power_On_Hours -O--C- 100 100 000 - 480 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 85 192 Power-Off_Retract_Count -O--CK 100 100 000 - 114 193 Load_Cycle_Count -O--C- 100 100 000 - 114 194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 23/44) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 3 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 3 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 [2] occurred at disk power-on lifetime: 419 hours (17 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 cd f7 17 00 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00cdf717 = 13498135 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 80 00 00 00 cd f6 98 e0 00 14:39:58.088 WRITE DMA EXT 35 00 00 00 80 00 00 00 cd f6 18 e0 00 14:39:58.086 WRITE DMA EXT 35 00 00 00 80 00 00 00 cd f5 98 e0 00 14:39:58.075 WRITE DMA EXT 35 00 00 00 80 00 00 00 cd f5 18 e0 00 14:39:58.073 WRITE DMA EXT 35 00 00 00 80 00 00 00 cd f4 98 e0 00 14:39:58.071 WRITE DMA EXT Error 2 [1] occurred at disk power-on lifetime: 419 hours (17 days + 11 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 01 00 00 00 29 5c a7 00 00 Error: ICRC, ABRT 1 sectors at LBA = 0x00295ca7 = 2710695 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 00 00 00 80 00 00 00 29 5c 28 e0 00 14:33:23.416 WRITE DMA EXT 35 00 00 00 80 00 00 00 29 5b a8 e0 00 14:33:23.413 WRITE DMA EXT 35 00 00 00 80 00 00 00 29 5b 28 e0 00 14:33:23.403 WRITE DMA EXT 35 00 00 00 80 00 00 00 29 5a a8 e0 00 14:33:23.400 WRITE DMA EXT 35 00 00 00 80 00 00 00 29 5a 28 e0 00 14:33:23.398 WRITE DMA EXT Error 1 [0] occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 00 40 00 00 00 04 4b 80 00 00 Error: ICRC, ABRT 64 sectors at LBA = 0x00044b80 = 281472 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 35 03 03 00 f0 00 00 00 04 4a d0 40 00 00:04:28.023 WRITE DMA EXT 35 03 03 00 f0 00 00 00 04 49 e0 40 00 00:04:28.020 WRITE DMA EXT 35 03 03 00 f0 00 00 00 04 48 f0 40 00 00:04:28.017 WRITE DMA EXT 35 03 03 00 f0 00 00 00 04 48 00 40 00 00:04:28.015 WRITE DMA EXT 25 03 03 00 08 00 00 00 00 28 08 40 00 00:04:27.998 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 32/35 Celsius Lifetime Min/Max Temperature: 23/44 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (91) Index Estimated Time Temperature Celsius 92 2019-11-01 07:45 33 ************** ... ..( 6 skipped). .. ************** 99 2019-11-01 07:52 33 ************** 100 2019-11-01 07:53 32 ************* 101 2019-11-01 07:54 ? - 102 2019-11-01 07:55 24 ***** 103 2019-11-01 07:56 25 ****** 104 2019-11-01 07:57 25 ****** 105 2019-11-01 07:58 26 ******* 106 2019-11-01 07:59 26 ******* 107 2019-11-01 08:00 27 ******** 108 2019-11-01 08:01 27 ******** 109 2019-11-01 08:02 28 ********* 110 2019-11-01 08:03 28 ********* 111 2019-11-01 08:04 28 ********* 112 2019-11-01 08:05 29 ********** ... ..( 2 skipped). .. ********** 115 2019-11-01 08:08 29 ********** 116 2019-11-01 08:09 30 *********** ... ..( 2 skipped). .. *********** 119 2019-11-01 08:12 30 *********** 120 2019-11-01 08:13 31 ************ ... ..( 5 skipped). .. ************ 126 2019-11-01 08:19 31 ************ 127 2019-11-01 08:20 32 ************* ... ..( 7 skipped). .. ************* 7 2019-11-01 08:28 32 ************* 8 2019-11-01 08:29 ? - 9 2019-11-01 08:30 32 ************* ... ..( 9 skipped). .. ************* 19 2019-11-01 08:40 32 ************* 20 2019-11-01 08:41 33 ************** 21 2019-11-01 08:42 32 ************* ... ..( 2 skipped). .. ************* 24 2019-11-01 08:45 32 ************* 25 2019-11-01 08:46 33 ************** ... ..( 29 skipped). .. ************** 55 2019-11-01 09:16 33 ************** 56 2019-11-01 09:17 34 *************** ... ..( 4 skipped). .. *************** 61 2019-11-01 09:22 34 *************** 62 2019-11-01 09:23 35 **************** ... ..( 6 skipped). .. **************** 69 2019-11-01 09:30 35 **************** 70 2019-11-01 09:31 34 *************** ... ..( 4 skipped). .. *************** 75 2019-11-01 09:36 34 *************** 76 2019-11-01 09:37 33 ************** ... ..( 14 skipped). .. ************** 91 2019-11-01 09:52 33 ************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 85 --- Lifetime Power-On Resets 0x01 0x010 4 480 --- Power-on Hours 0x01 0x018 6 4942633690 --- Logical Sectors Written 0x01 0x020 6 21476826 --- Number of Write Commands 0x01 0x028 6 16331359526 --- Logical Sectors Read 0x01 0x030 6 15203218 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 466 --- Spindle Motor Power-on Hours 0x03 0x010 4 471 --- Head Flying Hours 0x03 0x018 4 114 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 2 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 --- Current Temperature 0x05 0x010 1 33 N-- Average Short Term Temperature 0x05 0x018 1 34 N-- Average Long Term Temperature 0x05 0x020 1 44 --- Highest Temperature 0x05 0x028 1 23 --- Lowest Temperature 0x05 0x030 1 40 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 34 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 402 --- Number of Hardware Resets 0x06 0x010 4 274 --- Number of ASR Events 0x06 0x018 4 3 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 39404 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sdc === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA200 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX4OABB0 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Nov 1 09:52:29 2019 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13961) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 233) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 141 141 054 - 66 3 Spin_Up_Time POS--- 128 128 024 - 296 (Average 296) 4 Start_Stop_Count -O--C- 100 100 000 - 63 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 099 099 000 - 12680 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 54 192 Power-Off_Retract_Count -O--CK 100 100 000 - 63 193 Load_Cycle_Count -O--C- 100 100 000 - 63 194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 24/41) 196 Reallocated_Event_Count -O--CK 100 100 000 - 8 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 54 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 54 [1] occurred at disk power-on lifetime: 12153 hours (506 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 48 47 22 00 08 00 Error: WP at LBA = 0x48472200 = 1212621312 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 10 00 d0 00 00 d2 8e e5 70 40 00 5d+23:32:36.728 WRITE FPDMA QUEUED 61 00 70 00 c8 00 00 d2 8e e5 00 40 00 5d+23:32:36.728 WRITE FPDMA QUEUED 61 00 80 00 90 00 00 d2 8e e4 80 40 00 5d+23:32:36.727 WRITE FPDMA QUEUED 61 00 80 00 88 00 00 d2 8e e4 00 40 00 5d+23:32:36.727 WRITE FPDMA QUEUED 61 00 50 00 80 00 00 d2 8e e3 b0 40 00 5d+23:32:36.727 WRITE FPDMA QUEUED Error 53 [0] occurred at disk power-on lifetime: 11562 hours (481 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 48 47 4f 80 08 00 Error: UNC at LBA = 0x48474f80 = 1212632960 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 08 00 00 48 47 4f 80 40 00 02:44:59.159 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 02:44:59.159 READ LOG EXT 60 00 80 00 08 00 00 48 47 4f 00 40 00 02:44:54.315 READ FPDMA QUEUED 60 00 80 00 08 00 00 48 47 4e 80 40 00 02:44:54.196 READ FPDMA QUEUED 60 00 80 00 08 00 00 48 47 4e 00 40 00 02:44:54.077 READ FPDMA QUEUED Error 52 [3] occurred at disk power-on lifetime: 11562 hours (481 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 38 00 00 48 47 4f 48 08 00 Error: UNC at LBA = 0x48474f48 = 1212632904 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 08 00 00 48 47 4f 00 40 00 02:44:54.315 READ FPDMA QUEUED 60 00 80 00 08 00 00 48 47 4e 80 40 00 02:44:54.196 READ FPDMA QUEUED 60 00 80 00 08 00 00 48 47 4e 00 40 00 02:44:54.077 READ FPDMA QUEUED 60 00 80 00 08 00 00 48 47 4d 80 40 00 02:44:53.957 READ FPDMA QUEUED 60 00 80 00 08 00 00 48 47 4d 00 40 00 02:44:53.837 READ FPDMA QUEUED Error 51 [2] occurred at disk power-on lifetime: 11562 hours (481 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 80 00 00 48 47 45 00 08 00 Error: UNC at LBA = 0x48474500 = 1212630272 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 08 00 00 48 47 45 00 40 00 02:44:48.278 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 02:44:48.277 READ LOG EXT 60 00 80 00 08 00 00 48 47 44 80 40 00 02:44:44.036 READ FPDMA QUEUED 60 00 80 00 08 00 00 48 47 44 00 40 00 02:44:43.923 READ FPDMA QUEUED 60 00 80 00 08 00 00 48 47 43 80 40 00 02:44:43.796 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SMART Off-line Data Collection executing in background (4) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 35/37 Celsius Lifetime Min/Max Temperature: 24/41 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (23) Index Estimated Time Temperature Celsius 24 2019-11-01 07:45 36 ***************** ... ..( 7 skipped). .. ***************** 32 2019-11-01 07:53 36 ***************** 33 2019-11-01 07:54 ? - 34 2019-11-01 07:55 25 ****** 35 2019-11-01 07:56 25 ****** 36 2019-11-01 07:57 26 ******* 37 2019-11-01 07:58 26 ******* 38 2019-11-01 07:59 27 ******** 39 2019-11-01 08:00 28 ********* 40 2019-11-01 08:01 28 ********* 41 2019-11-01 08:02 29 ********** 42 2019-11-01 08:03 29 ********** 43 2019-11-01 08:04 30 *********** 44 2019-11-01 08:05 30 *********** 45 2019-11-01 08:06 30 *********** 46 2019-11-01 08:07 31 ************ 47 2019-11-01 08:08 31 ************ 48 2019-11-01 08:09 31 ************ 49 2019-11-01 08:10 32 ************* 50 2019-11-01 08:11 32 ************* 51 2019-11-01 08:12 32 ************* 52 2019-11-01 08:13 33 ************** ... ..( 2 skipped). .. ************** 55 2019-11-01 08:16 33 ************** 56 2019-11-01 08:17 34 *************** ... ..( 4 skipped). .. *************** 61 2019-11-01 08:22 34 *************** 62 2019-11-01 08:23 35 **************** ... ..( 4 skipped). .. **************** 67 2019-11-01 08:28 35 **************** 68 2019-11-01 08:29 ? - 69 2019-11-01 08:30 35 **************** ... ..( 3 skipped). .. **************** 73 2019-11-01 08:34 35 **************** 74 2019-11-01 08:35 36 ***************** ... ..( 18 skipped). .. ***************** 93 2019-11-01 08:54 36 ***************** 94 2019-11-01 08:55 37 ****************** 95 2019-11-01 08:56 36 ***************** 96 2019-11-01 08:57 36 ***************** 97 2019-11-01 08:58 37 ****************** ... ..( 50 skipped). .. ****************** 20 2019-11-01 09:49 37 ****************** 21 2019-11-01 09:50 36 ***************** 22 2019-11-01 09:51 36 ***************** 23 2019-11-01 09:52 36 ***************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 54 --- Lifetime Power-On Resets 0x01 0x010 4 12680 --- Power-on Hours 0x01 0x018 6 286028628810 --- Logical Sectors Written 0x01 0x020 6 3136821551 --- Number of Write Commands 0x01 0x028 6 68059660038 --- Logical Sectors Read 0x01 0x030 6 758424650 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 12672 --- Spindle Motor Power-on Hours 0x03 0x010 4 12672 --- Head Flying Hours 0x03 0x018 4 63 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 157 --- Read Recovery Attempts 0x03 0x030 4 12 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 934 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 36 --- Current Temperature 0x05 0x010 1 34 N-- Average Short Term Temperature 0x05 0x018 1 36 N-- Average Long Term Temperature 0x05 0x020 1 41 --- Highest Temperature 0x05 0x028 1 24 --- Lowest Temperature 0x05 0x030 1 39 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 38 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 621 --- Number of Hardware Resets 0x06 0x010 4 553 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS /dev/sde === START OF INFORMATION SECTION === Model Family: Toshiba 3.5" DT01ACA... Desktop HDD Device Model: TOSHIBA DT01ACA200 Serial Number: -- LU WWN Device Id: 5 000039 ... Firmware Version: MX4OABB0 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Nov 1 09:52:31 2019 +04 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14152) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 236) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0 2 Throughput_Performance P-S--- 140 140 054 - 67 3 Spin_Up_Time POS--- 126 126 024 - 302 (Average 301) 4 Start_Stop_Count -O--C- 100 100 000 - 1192 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 124 124 020 - 33 9 Power_On_Hours -O--C- 100 100 000 - 3131 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 1192 192 Power-Off_Retract_Count -O--CK 099 099 000 - 1203 193 Load_Cycle_Count -O--C- 099 099 000 - 1203 194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 19/47) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL R/O 7 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x20 GPL R/O 1 Streaming performance log [OBS-8] 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 38 Celsius Power Cycle Min/Max Temperature: 25/38 Celsius Lifetime Min/Max Temperature: 19/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (56) Index Estimated Time Temperature Celsius 57 2019-11-01 07:45 38 ******************* ... ..( 2 skipped). .. ******************* 60 2019-11-01 07:48 38 ******************* 61 2019-11-01 07:49 39 ******************** ... ..( 52 skipped). .. ******************** 114 2019-11-01 08:42 39 ******************** 115 2019-11-01 08:43 40 ********************* 116 2019-11-01 08:44 40 ********************* 117 2019-11-01 08:45 40 ********************* 118 2019-11-01 08:46 39 ******************** 119 2019-11-01 08:47 39 ******************** 120 2019-11-01 08:48 ? - 121 2019-11-01 08:49 26 ******* 122 2019-11-01 08:50 26 ******* 123 2019-11-01 08:51 27 ******** 124 2019-11-01 08:52 28 ********* 125 2019-11-01 08:53 28 ********* 126 2019-11-01 08:54 28 ********* 127 2019-11-01 08:55 29 ********** 0 2019-11-01 08:56 29 ********** 1 2019-11-01 08:57 30 *********** ... ..( 2 skipped). .. *********** 4 2019-11-01 09:00 30 *********** 5 2019-11-01 09:01 31 ************ 6 2019-11-01 09:02 31 ************ 7 2019-11-01 09:03 31 ************ 8 2019-11-01 09:04 32 ************* ... ..( 2 skipped). .. ************* 11 2019-11-01 09:07 32 ************* 12 2019-11-01 09:08 33 ************** ... ..( 2 skipped). .. ************** 15 2019-11-01 09:11 33 ************** 16 2019-11-01 09:12 34 *************** ... ..( 5 skipped). .. *************** 22 2019-11-01 09:18 34 *************** 23 2019-11-01 09:19 35 **************** ... ..( 4 skipped). .. **************** 28 2019-11-01 09:24 35 **************** 29 2019-11-01 09:25 36 ***************** ... ..( 10 skipped). .. ***************** 40 2019-11-01 09:36 36 ***************** 41 2019-11-01 09:37 37 ****************** ... ..( 9 skipped). .. ****************** 51 2019-11-01 09:47 37 ****************** 52 2019-11-01 09:48 38 ******************* ... ..( 3 skipped). .. ******************* 56 2019-11-01 09:52 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1192 --- Lifetime Power-On Resets 0x01 0x010 4 3131 --- Power-on Hours 0x01 0x018 6 3663166340 --- Logical Sectors Written 0x01 0x020 6 29958712 --- Number of Write Commands 0x01 0x028 6 8799186489 --- Logical Sectors Read 0x01 0x030 6 79497633 --- Number of Read Commands 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 3128 --- Spindle Motor Power-on Hours 0x03 0x010 4 3128 --- Head Flying Hours 0x03 0x018 4 1203 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 7 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 38 --- Current Temperature 0x05 0x010 1 39 N-- Average Short Term Temperature 0x05 0x018 1 37 N-- Average Long Term Temperature 0x05 0x020 1 47 --- Highest Temperature 0x05 0x028 1 19 --- Lowest Temperature 0x05 0x030 1 44 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 41 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 2279 --- Number of Hardware Resets 0x06 0x010 4 1080 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS