/dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.8.0-41-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD642JJ Serial Number: -- LU WWN Device Id: 5 0024e9 ... Firmware Version: 1AA01117 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b Local Time is: Mon Feb 8 14:57:09 2021 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 128 (quiet), recommended: 254 APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 7336) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 123) minutes. Conveyance self-test routine recommended polling time: ( 14) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 0 3 Spin_Up_Time POS--- 083 083 011 - 5950 4 Start_Stop_Count -O--CK 093 093 000 - 6624 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 7 Seek_Error_Rate -OSR-- 100 100 000 - 0 8 Seek_Time_Performance --S--K 100 100 000 - 11929 9 Power_On_Hours -O--CK 096 096 000 - 21476 10 Spin_Retry_Count -O--CK 100 100 000 - 5 11 Calibration_Retry_Count -O--C- 100 100 000 - 0 12 Power_Cycle_Count -O--CK 093 093 000 - 6589 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 0 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 076 066 000 - 24 (Min/Max 12/24) 194 Temperature_Celsius -O---K 076 064 000 - 24 (Min/Max 12/24) 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 231085 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 1 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x04 GPL R/O 2 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 2 Write stream error log 0x22 GPL R/O 2 Read stream error log 0x40 GPL - 2 Reserved 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 2010 hours (83 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 48 00 e7 00 00 28 9b 9a 39 40 00 at LBA = 0x289b9a39 = 681286201 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 00 01 00 00 00 00 9b 9c 20 40 00 01:10:01.930 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 00 9b 9b 20 40 00 01:10:01.930 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 00 9b 9a 20 40 00 01:10:01.930 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 00 9b 99 20 40 00 01:10:01.930 WRITE FPDMA QUEUED 61 00 00 01 00 00 00 00 9b 98 20 40 00 01:10:01.930 WRITE FPDMA QUEUED SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15054 - # 2 Short offline Completed without error 00% 7287 - # 3 Short offline Completed without error 00% 1974 - # 4 Short offline Completed without error 00% 189 - # 5 Short offline Completed without error 00% 182 - # 6 Short offline Completed without error 00% 182 - # 7 Short offline Completed without error 00% 1 - # 8 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: --/24 Celsius Lifetime Min/Max Temperature: --/57 Celsius SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -4/72 Celsius Min/Max Temperature Limit: -9/77 Celsius Temperature History Size (Index): 128 (51) Index Estimated Time Temperature Celsius 52 2021-02-08 12:50 24 ***** ... ..(126 skipped). .. ***** 51 2021-02-08 14:57 24 ***** SCT Error Recovery Control: Read: Disabled Write: Disabled ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters Read Device Statistics page 0x00 failed Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC /dev/sdf smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.8.0-41-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST1000LM010-9YH146 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: CC9F User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Feb 8 14:57:09 2021 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 208 (intermediate), recommended: 208 APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 689) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 285) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103b) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 128 099 006 - 1749008520 3 Spin_Up_Time PO---- 096 093 000 - 0 4 Start_Stop_Count -O--CK 089 089 020 - 12179 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 071 060 030 - 12972401 9 Power_On_Hours -O--CK 100 100 000 - 641 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 095 095 020 - 5228 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 088 000 - 21475622984 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 076 056 045 - 24 (Min/Max 13/24) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 118 193 Load_Cycle_Count -O--CK 090 090 000 - 21384 194 Temperature_Celsius -O---K 024 044 000 - 24 (0 11 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 038 031 000 - 1749008520 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 1801 (87 93 0) 241 Total_LBAs_Written ------ 100 253 000 - 1637729082 242 Total_LBAs_Read ------ 100 253 000 - 505120871 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands require SAT ATA PASS-THROUGH (16) Read GP Log Directory failed SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x09 SL R/W 1 Selective self-test log 0x80-0x9f SL R/W 16 Host vendor specific log 0xa1 SL VS 20 Device vendor specific log 0xa8 SL VS 20 Device vendor specific log 0xa9 SL VS 1 Device vendor specific log 0xc0 SL VS 1 Device vendor specific log 0xe0 SL R/W 1 SCT Command/Status 0xe1 SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 225 - # 2 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 13/25 Celsius Lifetime Min/Max Temperature: 11/44 Celsius Under/Over Temperature Limit Count: 2/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (6) Index Estimated Time Temperature Celsius 7 2021-02-03 09:49 19 - 8 2021-02-03 10:48 19 - 9 2021-02-03 11:47 ? - 10 2021-02-03 12:46 20 * 11 2021-02-03 13:45 20 * 12 2021-02-03 14:44 ? - 13 2021-02-03 15:43 26 ******* 14 2021-02-03 16:42 26 ******* 15 2021-02-03 17:41 ? - 16 2021-02-03 18:40 27 ******** 17 2021-02-03 19:39 27 ******** 18 2021-02-03 20:38 ? - 19 2021-02-03 21:37 20 * 20 2021-02-03 22:36 20 * 21 2021-02-03 23:35 ? - 22 2021-02-04 00:34 24 ***** 23 2021-02-04 01:33 24 ***** 24 2021-02-04 02:32 ? - 25 2021-02-04 03:31 20 * 26 2021-02-04 04:30 20 * 27 2021-02-04 05:29 ? - 28 2021-02-04 06:28 21 ** 29 2021-02-04 07:27 21 ** 30 2021-02-04 08:26 ? - 31 2021-02-04 09:25 24 ***** 32 2021-02-04 10:24 24 ***** 33 2021-02-04 11:23 ? - 34 2021-02-04 12:22 18 - 35 2021-02-04 13:21 18 - 36 2021-02-04 14:20 ? - 37 2021-02-04 15:19 19 - 38 2021-02-04 16:18 19 - 39 2021-02-04 17:17 ? - 40 2021-02-04 18:16 21 ** 41 2021-02-04 19:15 21 ** 42 2021-02-04 20:14 ? - 43 2021-02-04 21:13 16 - 44 2021-02-04 22:12 16 - 45 2021-02-04 23:11 ? - 46 2021-02-05 00:10 24 ***** 47 2021-02-05 01:09 24 ***** 48 2021-02-05 02:08 ? - 49 2021-02-05 03:07 15 - 50 2021-02-05 04:06 15 - 51 2021-02-05 05:05 ? - 52 2021-02-05 06:04 16 - 53 2021-02-05 07:03 16 - 54 2021-02-05 08:02 ? - 55 2021-02-05 09:01 18 - 56 2021-02-05 10:00 18 - 57 2021-02-05 10:59 ? - 58 2021-02-05 11:58 22 *** 59 2021-02-05 12:57 22 *** 60 2021-02-05 13:56 ? - 61 2021-02-05 14:55 22 *** 62 2021-02-05 15:54 22 *** 63 2021-02-05 16:53 ? - 64 2021-02-05 17:52 16 - 65 2021-02-05 18:51 16 - 66 2021-02-05 19:50 ? - 67 2021-02-05 20:49 14 - 68 2021-02-05 21:48 14 - 69 2021-02-05 22:47 ? - 70 2021-02-05 23:46 16 - 71 2021-02-06 00:45 16 - 72 2021-02-06 01:44 ? - 73 2021-02-06 02:43 14 - 74 2021-02-06 03:42 14 - 75 2021-02-06 04:41 ? - 76 2021-02-06 05:40 14 - 77 2021-02-06 06:39 14 - 78 2021-02-06 07:38 ? - 79 2021-02-06 08:37 14 - 80 2021-02-06 09:36 14 - 81 2021-02-06 10:35 ? - 82 2021-02-06 11:34 15 - 83 2021-02-06 12:33 15 - 84 2021-02-06 13:32 ? - 85 2021-02-06 14:31 19 - 86 2021-02-06 15:30 19 - 87 2021-02-06 16:29 ? - 88 2021-02-06 17:28 14 - 89 2021-02-06 18:27 14 - 90 2021-02-06 19:26 ? - 91 2021-02-06 20:25 14 - 92 2021-02-06 21:24 14 - 93 2021-02-06 22:23 ? - 94 2021-02-06 23:22 15 - 95 2021-02-07 00:21 15 - 96 2021-02-07 01:20 ? - 97 2021-02-07 02:19 20 * 98 2021-02-07 03:18 20 * 99 2021-02-07 04:17 ? - 100 2021-02-07 05:16 14 - 101 2021-02-07 06:15 14 - 102 2021-02-07 07:14 ? - 103 2021-02-07 08:13 17 - 104 2021-02-07 09:12 17 - 105 2021-02-07 10:11 ? - 106 2021-02-07 11:10 19 - 107 2021-02-07 12:09 19 - 108 2021-02-07 13:08 ? - 109 2021-02-07 14:07 14 - 110 2021-02-07 15:06 14 - 111 2021-02-07 16:05 ? - 112 2021-02-07 17:04 18 - 113 2021-02-07 18:03 18 - 114 2021-02-07 19:02 ? - 115 2021-02-07 20:01 15 - 116 2021-02-07 21:00 15 - 117 2021-02-07 21:59 ? - 118 2021-02-07 22:58 14 - 119 2021-02-07 23:57 14 - 120 2021-02-08 00:56 ? - 121 2021-02-08 01:55 14 - 122 2021-02-08 02:54 14 - 123 2021-02-08 03:53 ? - 124 2021-02-08 04:52 15 - 125 2021-02-08 05:51 15 - 126 2021-02-08 06:50 ? - 127 2021-02-08 07:49 13 - 0 2021-02-08 08:48 13 - 1 2021-02-08 09:47 ? - 2 2021-02-08 10:46 15 - 3 2021-02-08 11:45 15 - 4 2021-02-08 12:44 ? - 5 2021-02-08 13:43 13 - 6 2021-02-08 14:42 13 - SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands require SAT ATA PASS-THROUGH (16) Read SATA Phy Event Counters failed