/dev/nvme0n1 smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-43-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: Samsung SSD 970 PRO 512GB Serial Number: -- Firmware Version: 1B2QEXP7 PCI Vendor/Subsystem ID: 0x144d IEEE OUI Identifier: 0x002538 Total NVM Capacity: 512,110,190,592 [512 GB] Unallocated NVM Capacity: 0 Controller ID: 4 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 512,110,190,592 [512 GB] Namespace 1 Utilization: 321,939,742,720 [321 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 002538 ... Local Time is: Tue Jun 13 15:24:51 2023 CEST Firmware Updates (0x16): 3 Slots, no Reset required Optional Admin Commands (0x0037): Security Format Frmw_DL Self_Test Directvs Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg Maximum Data Transfer Size: 512 Pages Warning Comp. Temp. Threshold: 81 Celsius Critical Comp. Temp. Threshold: 81 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 6.20W - - 0 0 0 0 0 0 1 + 4.30W - - 1 1 1 1 0 0 2 + 2.10W - - 2 2 2 2 0 0 3 - 0.0400W - - 3 3 3 3 210 1200 4 - 0.0050W - - 4 4 4 4 2000 8000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 48 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 27,945,533 [14.3 TB] Data Units Written: 20,287,210 [10.3 TB] Host Read Commands: 264,451,073 Host Write Commands: 227,281,393 Controller Busy Time: 1,188 Power Cycles: 487 Power On Hours: 2,460 Unsafe Shutdowns: 71 Media and Data Integrity Errors: 0 Error Information Log Entries: 2,244 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 48 Celsius Temperature Sensor 2: 73 Celsius Error Information (NVMe Log 0x01, 16 of 64 entries) Num ErrCount SQId CmdId Status PELoc LBA NSID VS 0 2244 0 0x0004 0x4004 - 0 0 - /dev/sda smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.19.0-43-generic] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda Pro Compute Device Model: ST1000LM049-2GH172 Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: SDM1 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches TRIM Command: Available Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jun 13 15:24:51 2023 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 124) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 080 064 006 - 104882732 3 Spin_Up_Time PO---- 099 099 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1150 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 072 060 045 - 15812343 9 Power_On_Hours -O--CK 096 096 000 - 3535 (201 6 0) 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 486 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 100 000 - 0 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 065 057 040 - 35 (Min/Max 34/36) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 2 192 Power-Off_Retract_Count -O--CK 100 100 000 - 51 193 Load_Cycle_Count -O--CK 093 093 000 - 15452 194 Temperature_Celsius -O---K 035 043 000 - 35 (0 13 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 2382 (21 222 0) 241 Total_LBAs_Written ------ 100 253 000 - 2541007520 242 Total_LBAs_Read ------ 100 253 000 - 5139850166 254 Free_Fall_Sensor -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x24 GPL R/O 512 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 24 Device vendor specific log 0xa2 GPL VS 8160 Device vendor specific log 0xa8 GPL,SL VS 136 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 8920 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL,SL VS 16 Device vendor specific log 0xc2 GPL,SL VS 240 Device vendor specific log 0xc3 GPL,SL VS 8 Device vendor specific log 0xc4 GPL,SL VS 24 Device vendor specific log 0xc9 GPL,SL VS 1 Device vendor specific log 0xca GPL,SL VS 16 Device vendor specific log 0xd3 GPL VS 1920 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 36 Celsius Power Cycle Min/Max Temperature: 34/36 Celsius Lifetime Min/Max Temperature: 13/51 Celsius Specified Max Operating Temperature: 29 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 30 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (15) Index Estimated Time Temperature Celsius 16 2023-06-10 23:30 28 ********* 17 2023-06-11 00:00 29 ********** ... ..( 5 skipped). .. ********** 23 2023-06-11 03:00 29 ********** 24 2023-06-11 03:30 ? - 25 2023-06-11 04:00 25 ****** 26 2023-06-11 04:30 33 ************** ... ..( 4 skipped). .. ************** 31 2023-06-11 07:00 33 ************** 32 2023-06-11 07:30 32 ************* 33 2023-06-11 08:00 33 ************** ... ..( 12 skipped). .. ************** 46 2023-06-11 14:30 33 ************** 47 2023-06-11 15:00 32 ************* 48 2023-06-11 15:30 32 ************* 49 2023-06-11 16:00 32 ************* 50 2023-06-11 16:30 33 ************** 51 2023-06-11 17:00 33 ************** 52 2023-06-11 17:30 32 ************* 53 2023-06-11 18:00 32 ************* 54 2023-06-11 18:30 33 ************** 55 2023-06-11 19:00 33 ************** 56 2023-06-11 19:30 ? - 57 2023-06-11 20:00 26 ******* 58 2023-06-11 20:30 33 ************** 59 2023-06-11 21:00 33 ************** 60 2023-06-11 21:30 34 *************** ... ..( 11 skipped). .. *************** 72 2023-06-12 03:30 34 *************** 73 2023-06-12 04:00 33 ************** ... ..( 3 skipped). .. ************** 77 2023-06-12 06:00 33 ************** 78 2023-06-12 06:30 32 ************* 79 2023-06-12 07:00 31 ************ ... ..( 4 skipped). .. ************ 84 2023-06-12 09:30 31 ************ 85 2023-06-12 10:00 32 ************* 86 2023-06-12 10:30 33 ************** ... ..( 5 skipped). .. ************** 92 2023-06-12 13:30 33 ************** 93 2023-06-12 14:00 34 *************** 94 2023-06-12 14:30 33 ************** 95 2023-06-12 15:00 34 *************** ... ..( 12 skipped). .. *************** 108 2023-06-12 21:30 34 *************** 109 2023-06-12 22:00 ? - 110 2023-06-12 22:30 25 ****** 111 2023-06-12 23:00 34 *************** ... ..( 8 skipped). .. *************** 120 2023-06-13 03:30 34 *************** 121 2023-06-13 04:00 33 ************** ... ..( 3 skipped). .. ************** 125 2023-06-13 06:00 33 ************** 126 2023-06-13 06:30 34 *************** ... ..( 2 skipped). .. *************** 1 2023-06-13 08:00 34 *************** 2 2023-06-13 08:30 ? - 3 2023-06-13 09:00 26 ******* 4 2023-06-13 09:30 33 ************** ... ..( 3 skipped). .. ************** 8 2023-06-13 11:30 33 ************** 9 2023-06-13 12:00 34 *************** ... ..( 3 skipped). .. *************** 13 2023-06-13 14:00 34 *************** 14 2023-06-13 14:30 ? - 15 2023-06-13 15:00 34 *************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 486 --- Lifetime Power-On Resets 0x01 0x010 4 3535 --- Power-on Hours 0x01 0x018 6 2541007544 --- Logical Sectors Written 0x01 0x020 6 13421379 --- Number of Write Commands 0x01 0x028 6 5139847950 --- Logical Sectors Read 0x01 0x030 6 30403913 --- Number of Read Commands 0x01 0x038 6 - --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 3247 --- Spindle Motor Power-on Hours 0x03 0x010 4 1525 --- Head Flying Hours 0x03 0x018 4 15452 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS