/dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-68.5rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 Device Model: ST31000524AS Serial Number: -- LU WWN Device Id: 5 000c50 ... Firmware Version: JC45 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Apr 5 20:44:07 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Disabled APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 165) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 115 099 006 - 96624165 3 Spin_Up_Time PO---- 100 100 000 - 0 4 Start_Stop_Count -O--CK 097 097 020 - 3529 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 081 060 030 - 8856156877 9 Power_On_Hours -O--CK 083 083 000 - 15298 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 097 097 020 - 3261 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 188 Command_Timeout -O--CK 100 097 000 - 51540394054 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 072 057 045 - 28 (Min/Max 18/28) 194 Temperature_Celsius -O---K 028 043 000 - 28 (0 5 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 025 023 000 - 96624165 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 240 Head_Flying_Hours ------ 100 253 000 - 23608 (28 79 0) 241 Total_LBAs_Written ------ 100 253 000 - 665309923 242 Total_LBAs_Read ------ 100 253 000 - 751547472 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 2248 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL VS 2928 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 28 Celsius Power Cycle Min/Max Temperature: 18/28 Celsius Lifetime Min/Max Temperature: 5/43 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 59 minutes Min/Max recommended Temperature: 14/55 Celsius Min/Max Temperature Limit: 10/60 Celsius Temperature History Size (Index): 128 (102) Index Estimated Time Temperature Celsius 103 2020-03-31 15:34 ? - 104 2020-03-31 16:33 18 - 105 2020-03-31 17:32 18 - 106 2020-03-31 18:31 22 *** 107 2020-03-31 19:30 26 ******* 108 2020-03-31 20:29 ? - 109 2020-03-31 21:28 18 - 110 2020-03-31 22:27 18 - 111 2020-03-31 23:26 27 ******** 112 2020-04-01 00:25 ? - 113 2020-04-01 01:24 18 - 114 2020-04-01 02:23 18 - 115 2020-04-01 03:22 ? - 116 2020-04-01 04:21 26 ******* ... ..( 2 skipped). .. ******* 119 2020-04-01 07:18 26 ******* 120 2020-04-01 08:17 ? - 121 2020-04-01 09:16 24 ***** 122 2020-04-01 10:15 ? - 123 2020-04-01 11:14 26 ******* ... ..( 3 skipped). .. ******* 127 2020-04-01 15:10 26 ******* 0 2020-04-01 16:09 ? - 1 2020-04-01 17:08 26 ******* 2 2020-04-01 18:07 ? - 3 2020-04-01 19:06 17 - 4 2020-04-01 20:05 17 - 5 2020-04-01 21:04 26 ******* 6 2020-04-01 22:03 27 ******** 7 2020-04-01 23:02 27 ******** 8 2020-04-02 00:01 ? - 9 2020-04-02 01:00 19 - 10 2020-04-02 01:59 19 - 11 2020-04-02 02:58 27 ******** 12 2020-04-02 03:57 ? - 13 2020-04-02 04:56 18 - 14 2020-04-02 05:55 ? - 15 2020-04-02 06:54 27 ******** 16 2020-04-02 07:53 27 ******** 17 2020-04-02 08:52 27 ******** 18 2020-04-02 09:51 28 ********* 19 2020-04-02 10:50 28 ********* 20 2020-04-02 11:49 ? - 21 2020-04-02 12:48 20 * 22 2020-04-02 13:47 20 * 23 2020-04-02 14:46 27 ******** 24 2020-04-02 15:45 24 ***** 25 2020-04-02 16:44 ? - 26 2020-04-02 17:43 18 - 27 2020-04-02 18:42 18 - 28 2020-04-02 19:41 26 ******* 29 2020-04-02 20:40 ? - 30 2020-04-02 21:39 19 - 31 2020-04-02 22:38 19 - 32 2020-04-02 23:37 26 ******* 33 2020-04-03 00:36 ? - 34 2020-04-03 01:35 19 - 35 2020-04-03 02:34 19 - 36 2020-04-03 03:33 26 ******* 37 2020-04-03 04:32 ? - 38 2020-04-03 05:31 18 - 39 2020-04-03 06:30 18 - 40 2020-04-03 07:29 25 ****** 41 2020-04-03 08:28 26 ******* ... ..( 7 skipped). .. ******* 49 2020-04-03 16:20 26 ******* 50 2020-04-03 17:19 ? - 51 2020-04-03 18:18 17 - 52 2020-04-03 19:17 17 - 53 2020-04-03 20:16 25 ****** ... ..( 3 skipped). .. ****** 57 2020-04-04 00:12 25 ****** 58 2020-04-04 01:11 26 ******* 59 2020-04-04 02:10 26 ******* 60 2020-04-04 03:09 27 ******** ... ..( 3 skipped). .. ******** 64 2020-04-04 07:05 27 ******** 65 2020-04-04 08:04 ? - 66 2020-04-04 09:03 18 - 67 2020-04-04 10:02 18 - 68 2020-04-04 11:01 25 ****** ... ..( 3 skipped). .. ****** 72 2020-04-04 14:57 25 ****** 73 2020-04-04 15:56 26 ******* ... ..( 5 skipped). .. ******* 79 2020-04-04 21:50 26 ******* 80 2020-04-04 22:49 ? - 81 2020-04-04 23:48 17 - 82 2020-04-05 00:47 ? - 83 2020-04-05 01:46 21 ** 84 2020-04-05 02:45 21 ** 85 2020-04-05 03:44 25 ****** 86 2020-04-05 04:43 26 ******* 87 2020-04-05 05:42 26 ******* 88 2020-04-05 06:41 ? - 89 2020-04-05 07:40 19 - 90 2020-04-05 08:39 19 - 91 2020-04-05 09:38 27 ******** 92 2020-04-05 10:37 ? - 93 2020-04-05 11:36 18 - 94 2020-04-05 12:35 18 - 95 2020-04-05 13:34 26 ******* 96 2020-04-05 14:33 26 ******* 97 2020-04-05 15:32 27 ******** 98 2020-04-05 16:31 28 ********* ... ..( 3 skipped). .. ********* 102 2020-04-05 20:27 28 ********* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS /dev/sdb smartctl 7.1 2019-12-30 r5022 [x86_64-linux-4.15.0-desktop-68.5rosa-x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.9 Device Model: ST3120814A Serial Number: -- Firmware Version: 3.AAJ User Capacity: 120,033,041,920 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sun Apr 5 20:44:07 2020 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 51) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 110 084 006 - 221101231 3 Spin_Up_Time PO---- 093 092 000 - 0 4 Start_Stop_Count -O--CK 099 099 020 - 1224 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 079 060 030 - 13172761124 9 Power_On_Hours -O--CK 095 095 000 - 4899 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 099 099 020 - 1625 187 Reported_Uncorrect -O--CK 070 070 000 - 30 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 069 050 045 - 31 (Min/Max 19/31) 194 Temperature_Celsius -O---K 031 050 000 - 31 (0 11 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 068 051 000 - 175081859 197 Current_Pending_Sector -O--C- 100 099 000 - 10 198 Offline_Uncorrectable ----C- 100 099 000 - 10 199 UDMA_CRC_Error_Count -OSRCK 200 194 000 - 112 200 Multi_Zone_Error_Rate ------ 100 253 000 - 0 202 Data_Address_Mark_Errs -O--CK 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 5 Comprehensive SMART error log 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 GPL,SL R/W 1 Selective self-test log 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8] 0x21 GPL,SL R/O 1 Write stream error log 0x22 GPL,SL R/O 1 Read stream error log 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8] 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0 GPL,SL VS 1 Device vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL,SL VS 101 Device vendor specific log 0xa8 GPL,SL VS 20 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer 0xff GPL - 23552 Reserved SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 658 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 658 [17] occurred at disk power-on lifetime: 4516 hours (188 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 07 00 01 9e f3 86 f3 f0 00 Error: UNC at LBA = 0x19ef386f3 = 6961727219 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:43.540 READ MULTIPLE EXT 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:41.631 READ MULTIPLE EXT 29 00 00 00 0c 00 01 05 00 91 57 f0 00 00:40:41.630 READ MULTIPLE EXT 29 00 00 00 35 00 00 6d 00 62 8a f0 00 00:40:41.624 READ MULTIPLE EXT 29 00 00 00 0b 00 00 6d 00 62 7f f0 00 00:40:41.613 READ MULTIPLE EXT Error 657 [16] occurred at disk power-on lifetime: 4516 hours (188 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 07 00 01 9e f3 86 f3 f0 00 Error: UNC at LBA = 0x19ef386f3 = 6961727219 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:41.542 READ MULTIPLE EXT 29 00 00 00 0c 00 01 05 00 91 57 f0 00 00:40:41.631 READ MULTIPLE EXT 29 00 00 00 35 00 00 6d 00 62 8a f0 00 00:40:41.630 READ MULTIPLE EXT 29 00 00 00 0b 00 00 6d 00 62 7f f0 00 00:40:41.624 READ MULTIPLE EXT 29 00 00 00 13 00 01 07 00 91 6c f0 00 00:40:41.613 READ MULTIPLE EXT Error 656 [15] occurred at disk power-on lifetime: 4517 hours (188 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 07 00 01 9e f3 86 f3 f0 00 Error: UNC at LBA = 0x19ef386f3 = 6961727219 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:00:14.871 READ MULTIPLE EXT 29 00 00 00 0c 00 01 05 00 91 57 f0 00 00:00:14.850 READ MULTIPLE EXT 29 00 00 00 35 00 00 6d 00 62 8a f0 00 00:00:14.845 READ MULTIPLE EXT 29 00 00 00 0b 00 00 6d 00 62 7f f0 00 00:00:14.837 READ MULTIPLE EXT 29 00 00 00 13 00 01 07 00 91 6c f0 00 00:00:14.828 READ MULTIPLE EXT Error 655 [14] occurred at disk power-on lifetime: 4516 hours (188 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 07 00 01 9e f3 86 f3 f0 00 Error: UNC at LBA = 0x19ef386f3 = 6961727219 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:43.540 READ MULTIPLE EXT 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:41.631 READ MULTIPLE EXT 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:41.630 READ MULTIPLE EXT 29 00 00 00 0c 00 01 05 00 91 57 f0 00 00:40:41.624 READ MULTIPLE EXT 29 00 00 00 35 00 00 6d 00 62 8a f0 00 00:40:41.613 READ MULTIPLE EXT Error 654 [13] occurred at disk power-on lifetime: 4516 hours (188 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 07 00 01 9e f3 86 f3 f0 00 Error: UNC at LBA = 0x19ef386f3 = 6961727219 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:43.540 READ MULTIPLE EXT 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:41.631 READ MULTIPLE EXT 29 00 00 00 0c 00 01 05 00 91 57 f0 00 00:40:41.630 READ MULTIPLE EXT 29 00 00 00 35 00 00 6d 00 62 8a f0 00 00:40:41.624 READ MULTIPLE EXT 29 00 00 00 0b 00 00 6d 00 62 7f f0 00 00:40:41.613 READ MULTIPLE EXT Error 653 [12] occurred at disk power-on lifetime: 4516 hours (188 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 07 00 01 9e f3 86 f3 f0 00 Error: UNC at LBA = 0x19ef386f3 = 6961727219 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:41.542 READ MULTIPLE EXT 29 00 00 00 0c 00 01 05 00 91 57 f0 00 00:40:41.631 READ MULTIPLE EXT 29 00 00 00 35 00 00 6d 00 62 8a f0 00 00:40:41.630 READ MULTIPLE EXT 29 00 00 00 0b 00 00 6d 00 62 7f f0 00 00:40:41.624 READ MULTIPLE EXT 29 00 00 00 13 00 01 07 00 91 6c f0 00 00:40:41.613 READ MULTIPLE EXT Error 652 [11] occurred at disk power-on lifetime: 4517 hours (188 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 07 00 01 9e f3 86 f3 f0 00 Error: UNC at LBA = 0x19ef386f3 = 6961727219 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:00:14.871 READ MULTIPLE EXT 29 00 00 00 0c 00 01 05 00 91 57 f0 00 00:00:14.850 READ MULTIPLE EXT 29 00 00 00 35 00 00 6d 00 62 8a f0 00 00:00:14.845 READ MULTIPLE EXT 29 00 00 00 0b 00 00 6d 00 62 7f f0 00 00:00:14.837 READ MULTIPLE EXT 29 00 00 00 13 00 01 07 00 91 6c f0 00 00:00:14.828 READ MULTIPLE EXT Error 651 [10] occurred at disk power-on lifetime: 4516 hours (188 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 07 00 01 9e f3 86 f3 f0 00 Error: UNC at LBA = 0x19ef386f3 = 6961727219 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:43.540 READ MULTIPLE EXT 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:41.631 READ MULTIPLE EXT 29 00 00 00 38 00 01 9e 00 86 bf f0 00 00:40:41.630 READ MULTIPLE EXT 29 00 00 00 0c 00 01 05 00 91 57 f0 00 00:40:41.624 READ MULTIPLE EXT 29 00 00 00 35 00 00 6d 00 62 8a f0 00 00:40:41.613 READ MULTIPLE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4767 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) not supported