nct6776-isa-0a30 Adapter: ISA adapter Vcore: 1.38 V (min = +1.02 V, max = +1.69 V) in1: 1.84 V (min = +1.55 V, max = +2.02 V) AVCC: 3.33 V (min = +2.98 V, max = +3.63 V) +3.3V: 3.33 V (min = +2.98 V, max = +3.63 V) in4: 1.50 V (min = +0.97 V, max = +1.65 V) in5: 1.26 V (min = +1.07 V, max = +1.39 V) in6: 1.46 V (min = +0.89 V, max = +1.23 V) ALARM 3VSB: 3.31 V (min = +2.98 V, max = +3.63 V) Vbat: 3.20 V (min = +2.70 V, max = +3.63 V) fan1: 0 RPM (min = 712 RPM) ALARM fan2: 0 RPM (min = 712 RPM) ALARM fan3: 534 RPM (min = 712 RPM) ALARM fan4: 0 RPM (min = 712 RPM) ALARM fan5: 0 RPM (min = 712 RPM) ALARM SYSTIN: +36.0 C (high = +85.0 C, hyst = +80.0 C) sensor = thermistor CPUTIN: +52.0 C (high = +85.0 C, hyst = +80.0 C) sensor = thermistor AUXTIN: +2.0 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor PECI Agent 0: +0.0 C (high = +80.0 C, hyst = +75.0 C) (crit = +100.0 C) PCH_CHIP_TEMP: +0.0 C PCH_CPU_TEMP: +0.0 C PCH_MCH_TEMP: +0.0 C intrusion0: ALARM intrusion1: OK beep_enable: enabled jc42-i2c-0-18 Adapter: SMBus I801 adapter at 0580 temp1: +29.2 C (low = +0.0 C) ALARM (HIGH, CRIT) (high = +0.0 C, hyst = +0.0 C) (crit = +0.0 C, hyst = +0.0 C) acpitz-acpi-0 Adapter: ACPI interface temp1: +27.8 C (crit = +90.0 C) temp2: +29.8 C (crit = +90.0 C) pch_haswell-virtual-0 Adapter: Virtual device temp1: +47.5 C jc42-i2c-0-1a Adapter: SMBus I801 adapter at 0580 temp1: +29.5 C (low = +0.0 C) ALARM (HIGH, CRIT) (high = +0.0 C, hyst = +0.0 C) (crit = +0.0 C, hyst = +0.0 C) coretemp-isa-0000 Adapter: ISA adapter Package id 0: +31.0 C (high = +79.0 C, crit = +85.0 C) Core 0: +31.0 C (high = +79.0 C, crit = +85.0 C) Core 1: +30.0 C (high = +79.0 C, crit = +85.0 C)