Probe #e45c3422f3 of Dell Inspiron 1110

Log: hwinfo

04: PCI 1f.2: 0106 SATA controller (AHCI 1.0) [Created at pci.386] Unique ID: w7Y8.K8jrd+_m7A9 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2929 "82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0x1818-0x181f (rw) I/O Ports: 0x180c-0x180f (rw) I/O Ports: 0x1810-0x1817 (rw) I/O Ports: 0x1808-0x180b (rw) I/O Ports: 0x18c0-0x18df (rw) Memory Range: 0xf0904000-0xf09047ff (rw,non-prefetchable) IRQ: 24 (51010 events) Module Alias: "pci:v00008086d00002929sv00001028sd00000409bc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 05: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.DUyfTO6lINB SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Intel 82801I (ICH9 Family) PCI Express Port 1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2940 "82801I (ICH9 Family) PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "pcieport" IRQ: 17 (no events) Module Alias: "pci:v00008086d00002940sv00001028sd00000409bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 06: PCI 1a.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: gFpy.gsHSyB1Y1MA SysFS ID: /devices/pci0000:00/0000:00:1a.1 SysFS BusID: 0000:00:1a.1 Hardware Class: usb controller Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #5" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2938 "82801I (ICH9 Family) USB UHCI Controller #5" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x1840-0x185f (rw) IRQ: 21 (no events) Module Alias: "pci:v00008086d00002938sv00001028sd00000409bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 07: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.XswpUFPSbj7 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel ICH9M-E LPC Interface Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2917 "ICH9M-E LPC Interface Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d00002917sv00001028sd00000409bc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 08: PCI 200.0: 0200 Ethernet controller [Created at pci.386] Unique ID: c3qJ.7_Tsg0tQrS2 Parent ID: z8Q3.DUyfTO6lINB SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Qualcomm Atheros AR8132 Fast Ethernet" Vendor: pci 0x1969 "Qualcomm Atheros" Device: pci 0x1062 "AR8132 Fast Ethernet" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0xc0 Driver: "atl1c" Driver Modules: "atl1c" Device File: enp2s0 Memory Range: 0xf0500000-0xf053ffff (rw,non-prefetchable) I/O Ports: 0x2000-0x207f (rw) IRQ: 26 (no events) HW Address: CAC839524DB0D08C8280596A3A9887D9 Permanent HW Address: CAC839524DB0D08C8280596A3A9887D9 Link detected: no Module Alias: "pci:v00001969d00001062sv00001028sd00000409bc02sc00i00" Driver Info #0: Driver Status: atl1c is active Driver Activation Cmd: "modprobe atl1c" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (PCI bridge) 09: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.7dSCWYKCSdA SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2935 "82801I (ICH9 Family) USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x1880-0x189f (rw) IRQ: 19 (38942 events) Module Alias: "pci:v00008086d00002935sv00001028sd00000409bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 10: PCI 800.0: 0280 Network controller [Created at pci.386] Unique ID: GBI1.gyef+lfqPY1 Parent ID: qTvu.FJr9RXL9M8C SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:08:00.0 SysFS BusID: 0000:08:00.0 Hardware Class: network Model: "Dell Wireless 1510 Wireless-N WLAN Mini-Card" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x432b "BCM4322 802.11a/b/g/n Wireless LAN Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x000d "Wireless 1510 Wireless-N WLAN Mini-Card" Revision: 0x01 Driver: "b43-pci-bridge" Driver Modules: "ssb" Memory Range: 0xf0600000-0xf0603fff (rw,non-prefetchable) IRQ: 17 (no events) Module Alias: "pci:v000014E4d0000432Bsv00001028sd0000000Dbc02sc80i00" Driver Info #0: Driver Status: ssb is active Driver Activation Cmd: "modprobe ssb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) 11: PCI 02.1: 0380 Display controller [Created at pci.386] Unique ID: ruGf.M7poJMjKdP7 SysFS ID: /devices/pci0000:00/0000:00:02.1 SysFS BusID: 0000:00:02.1 Hardware Class: graphics card Model: "Intel Mobile 4 Series Chipset Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a43 "Mobile 4 Series Chipset Integrated Graphics Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x07 Memory Range: 0xf0400000-0xf04fffff (rw,non-prefetchable) Module Alias: "pci:v00008086d00002A43sv00001028sd00000409bc03sc80i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.eTWdjQanf5B SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801I (ICH9 Family) HD Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x293e "82801I (ICH9 Family) HD Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xf0700000-0xf0703fff (rw,non-prefetchable) IRQ: 25 (624 events) Module Alias: "pci:v00008086d0000293Esv00001028sd00000409bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.PDn0ddzAAy1 SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 Mobile PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2448 "82801 Mobile PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x93 Module Alias: "pci:v00008086d00002448sv00001028sd00000409bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.azctdFlnDy6 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Intel 82801I (ICH9 Family) SMBus Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2930 "82801I (ICH9 Family) SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Memory Range: 0x80400000-0x804000ff (rw,non-prefetchable) I/O Ports: 0x18e0-0x18ff (rw) IRQ: 10 (no events) Module Alias: "pci:v00008086d00002930sv00001028sd00000409bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is not active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.sIDQ+Bt+cc5 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel Mobile 4 Series Chipset Memory Controller Hub" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a40 "Mobile 4 Series Chipset Memory Controller Hub" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x07 Module Alias: "pci:v00008086d00002A40sv00001028sd00000409bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1c.1: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: qTvu.FJr9RXL9M8C SysFS ID: /devices/pci0000:00/0000:00:1c.1 SysFS BusID: 0000:00:1c.1 Hardware Class: bridge Model: "Intel 82801I (ICH9 Family) PCI Express Port 2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2942 "82801I (ICH9 Family) PCI Express Port 2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "pcieport" IRQ: 16 (42145 events) Module Alias: "pci:v00008086d00002942sv00001028sd00000409bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.e1Py_6Svz+A SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #3" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2936 "82801I (ICH9 Family) USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x18a0-0x18bf (rw) IRQ: 18 (no events) Module Alias: "pci:v00008086d00002936sv00001028sd00000409bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 1a.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: pwJ7.9SLiTdvqVz9 SysFS ID: /devices/pci0000:00/0000:00:1a.0 SysFS BusID: 0000:00:1a.0 Hardware Class: usb controller Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #4" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2937 "82801I (ICH9 Family) USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x1820-0x183f (rw) IRQ: 16 (42145 events) Module Alias: "pci:v00008086d00002937sv00001028sd00000409bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.cCWS1_CVwEA SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Intel 82801I (ICH9 Family) USB UHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2934 "82801I (ICH9 Family) USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x1860-0x187f (rw) IRQ: 23 (638418 events) Module Alias: "pci:v00008086d00002934sv00001028sd00000409bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1a.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: sClz.EXfd9Y_6gj0 SysFS ID: /devices/pci0000:00/0000:00:1a.7 SysFS BusID: 0000:00:1a.7 Hardware Class: usb controller Model: "Intel 82801I (ICH9 Family) USB2 EHCI Controller #2" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x293c "82801I (ICH9 Family) USB2 EHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "ehci-pci" Memory Range: 0xf0904800-0xf0904bff (rw,non-prefetchable) IRQ: 19 (38942 events) Module Alias: "pci:v00008086d0000293Csv00001028sd00000409bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: _Znp.rgRAQWQgLo1 SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel Mobile 4 Series Chipset Integrated Graphics Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2a42 "Mobile 4 Series Chipset Integrated Graphics Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x07 Driver: "i915" Driver Modules: "i915" Memory Range: 0xf0000000-0xf03fffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) I/O Ports: 0x1800-0x1807 (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (42145 events) Module Alias: "pci:v00008086d00002A42sv00001028sd00000409bc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.Cim7CPlicyF SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Intel 82801I (ICH9 Family) USB2 EHCI Controller #1" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x293a "82801I (ICH9 Family) USB2 EHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0409 Revision: 0x03 Driver: "ehci-pci" Memory Range: 0xf0904c00-0xf0904fff (rw,non-prefetchable) IRQ: 23 (638418 events) Module Alias: "pci:v00008086d0000293Asv00001028sd00000409bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: None 00.0: 10002 LCD Monitor [Created at monitor.125] Unique ID: rdCR.WMveAzjG1YB Parent ID: _Znp.rgRAQWQgLo1 Hardware Class: monitor Model: "V1V85 B116XW1 LCD Monitor" Vendor: AUO "V1V85 B116XW1" Device: eisa 0x105c Resolution: 1366x768@60Hz Size: 256x144 mm Year of Manufacture: 2009 Week of Manufacture: 1 Detailed Timings #0: Resolution: 1366x768 Horizontal: 1366 1414 1446 1494 (+48 +80 +128) -hsync Vertical: 768 771 777 803 (+3 +9 +35) +vsync Frequencies: 72.00 MHz, 48.19 kHz, 60.02 Hz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (VGA compatible controller) 24: IDE 00.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.CL_V_i0xbU0 Parent ID: w7Y8.K8jrd+_m7A9 SysFS ID: /class/block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "WDC WD2500BEVT-7" Vendor: "WDC" Device: "WD2500BEVT-7" Revision: "1A11" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Number: block 8:0-8:15 BIOS id: 0x80 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #4 (SATA controller) 25: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.gkSaZmjGyhD Parent ID: vayM.7dSCWYKCSdA SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #9 (USB Controller) 26: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: cLrx._K1DSOujSr8 Parent ID: k4bc.cO89g+iefn1 SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0 SysFS BusID: 1-2:1.0 Hardware Class: unknown Model: "Suyin Integrated Webcam" Hotplug: USB Vendor: usb 0x064e "Suyin Corp." Device: usb 0x8101 "Integrated Webcam" Revision: "96.24" Serial ID: -- Driver: "uvcvideo" Driver Modules: "uvcvideo" Device File: /dev/input/event11 Device Number: char 13:75 Speed: 480 Mbps Module Alias: "usb:v064Ep8101d9624dcEFdsc02dp01ic0Eisc01ip00in00" Driver Info #0: Driver Status: uvcvideo is active Driver Activation Cmd: "modprobe uvcvideo" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #33 (Hub) 27: USB 00.0: 0282 WLAN controller [Created at usb.122] Unique ID: FKGF.z9BLYmNQMBE Parent ID: pBe4.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0 SysFS BusID: 2-1:1.0 Hardware Class: network Model: "ASUSTek USB-N53 802.11abgn Network Adapter [Ralink RT3572]" Hotplug: USB Vendor: usb 0x0b05 "ASUSTek Computer, Inc." Device: usb 0x179d "USB-N53 802.11abgn Network Adapter [Ralink RT3572]" Revision: "1.01" Serial ID: -- Driver: "rt2800usb" Driver Modules: "rt2800usb" Device File: wlx10bf485b4e7e Features: WLAN Speed: 480 Mbps HW Address: D43A8B21987BCA4709790ED0A44416F3 Permanent HW Address: D43A8B21987BCA4709790ED0A44416F3 Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 36 38 40 44 46 48 52 54 56 60 62 64 100 102 104 108 110 112 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 5.18 5.19 5.2 5.22 5.23 5.24 5.26 5.27 5.28 5.3 5.31 5.32 5.5 5.51 5.52 5.54 5.55 5.56 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "usb:v0B05p179Dd0101dc00dsc00dp00icFFiscFFipFFin00" Driver Info #0: Driver Status: rt2800usb is active Driver Activation Cmd: "modprobe rt2800usb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #36 (Hub) 28: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.MxUuepIFPaE Parent ID: pwJ7.9SLiTdvqVz9 SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (USB Controller) 29: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: ZmS7.+i6cPjf42e0 Parent ID: 7eqy.gkSaZmjGyhD SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0 SysFS BusID: 6-1:1.0 Hardware Class: mouse Model: "Logitech Unifying Receiver" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc52f "Unifying Receiver" Revision: "30.00" Compatible to: int 0x0200 0x0001 "Generic USB Mouse" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Number: char 13:63 (char 13:32) Speed: 12 Mbps Module Alias: "usb:v046DpC52Fd3000dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (Hub) 30: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT.RTX9xWW_uz4 Parent ID: mvRC.e1Py_6Svz+A SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #17 (USB Controller) 31: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.7gZT0a5zLs5 Parent ID: gFpy.gsHSyB1Y1MA SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (USB Controller) 33: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.cO89g+iefn1 Parent ID: sClz.EXfd9Y_6gj0 SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 34: USB 00.1: 0000 Unclassified device [Created at usb.122] Unique ID: 0yiB.p97M69KhO96 Parent ID: 7eqy.gkSaZmjGyhD SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1 SysFS BusID: 6-1:1.1 Hardware Class: unknown Model: "Logitech Unifying Receiver" Hotplug: USB Vendor: usb 0x046d "Logitech, Inc." Device: usb 0xc52f "Unifying Receiver" Revision: "30.00" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event5 Device Number: char 13:69 Speed: 12 Mbps Module Alias: "usb:v046DpC52Fd3000dc00dsc00dp00ic03isc00ip00in01" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (Hub) 35: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.v+N+B0xY+P6 Parent ID: 1GTX.cCWS1_CVwEA SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (USB Controller) 36: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.9T1GDCLyFd9 Parent ID: 5YuN.Cim7CPlicyF SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (USB Controller) 37: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.23.10 "Intel(R) Celeron(R) CPU 743 @ 1.30GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,tm2,ssse3,cx16,xtpr,pdcm,xsave,lahf_lm,pti,dtherm Clock: 1296 MHz BogoMips: 2593.63 Cache: 1024 kb Config Status: cfg=new, avail=yes, need=no, active=unknown 38: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: zOAL.ndpeucax6V1 Parent ID: FKGF.z9BLYmNQMBE SysFS ID: /class/net/wlx10bf485b4e7e SysFS Device Link: /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "rt2800usb" Driver Modules: "rt2800usb" Device File: wlx10bf485b4e7e HW Address: D43A8B21987BCA4709790ED0A44416F3 Permanent HW Address: D43A8B21987BCA4709790ED0A44416F3 Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (WLAN controller) 39: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: Ij4C.ndpeucax6V1 Parent ID: c3qJ.7_Tsg0tQrS2 SysFS ID: /class/net/enp2s0 SysFS Device Link: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "atl1c" Driver Modules: "atl1c" Device File: enp2s0 HW Address: CAC839524DB0D08C8280596A3A9887D9 Permanent HW Address: CAC839524DB0D08C8280596A3A9887D9 Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #8 (Ethernet controller) 40: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown


Hardware for Linux and BSD

GitHub