05: PCI 18.3: 0600 Host bridge [Created at pci.386] Unique ID: Fhhh.M7aE7ttHy94 SysFS ID: /devices/pci0000:00/0000:00:18.3 SysFS BusID: 0000:00:18.3 Hardware Class: bridge Model: "AMD K8 [Athlon64/Opteron] Miscellaneous Control" Vendor: pci 0x1022 "AMD" Device: pci 0x1103 "K8 [Athlon64/Opteron] Miscellaneous Control" Driver: "k8temp" Driver Modules: "k8temp" Module Alias: "pci:v00001022d00001103sv00000000sd00000000bc06sc00i00" Driver Info #0: Driver Status: k8temp is active Driver Activation Cmd: "modprobe k8temp" Config Status: cfg=new, avail=yes, need=no, active=unknown 06: PCI 13.2: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 06bT.PBoRvnalNQA SysFS ID: /devices/pci0000:00/0000:00:13.2 SysFS BusID: 0000:00:13.2 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4396 "SB7x0/SB8x0/SB9x0 USB EHCI Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4396 Driver: "ehci-pci" Memory Range: 0xf9ffa800-0xf9ffa8ff (rw,non-prefetchable) IRQ: 19 (130125 events) Module Alias: "pci:v00001002d00004396sv00001002sd00004396bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 07: PCI 18.1: 0600 Host bridge [Created at pci.386] Unique ID: W1j0.KIhk9ketuO3 SysFS ID: /devices/pci0000:00/0000:00:18.1 SysFS BusID: 0000:00:18.1 Hardware Class: bridge Model: "AMD K8 [Athlon64/Opteron] Address Map" Vendor: pci 0x1022 "AMD" Device: pci 0x1101 "K8 [Athlon64/Opteron] Address Map" Module Alias: "pci:v00001022d00001101sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 08: PCI 200.0: 0200 Ethernet controller [Created at pci.386] Unique ID: c3qJ.0IlF0nGz564 Parent ID: H0_h.F3lwQt0j1eE SysFS ID: /devices/pci0000:00/0000:00:06.0/0000:02:00.0 SysFS BusID: 0000:02:00.0 Hardware Class: network Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82c6 "M3A78 Series Motherboard" Revision: 0x02 Driver: "r8169" Driver Modules: "r8169" Device File: enp2s0 I/O Ports: 0xd800-0xd8ff (rw) Memory Range: 0xfeaff000-0xfeafffff (rw,non-prefetchable) Memory Range: 0xf8ff0000-0xf8ffffff (ro,non-prefetchable) Memory Range: 0xfeac0000-0xfeadffff (ro,non-prefetchable,disabled) IRQ: 18 (49455 events) HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: no Module Alias: "pci:v000010ECd00008168sv00001043sd000082C6bc02sc00i00" Driver Info #0: Driver Status: r8169 is active Driver Activation Cmd: "modprobe r8169" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (PCI bridge) 09: PCI 14.5: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: hB6S.iQqbCxPxK+3 SysFS ID: /devices/pci0000:00/0000:00:14.5 SysFS BusID: 0000:00:14.5 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4399 "SB7x0/SB8x0/SB9x0 USB OHCI2 Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4396 Driver: "ohci-pci" Memory Range: 0xf9ff9000-0xf9ff9fff (rw,non-prefetchable) IRQ: 18 (49455 events) Module Alias: "pci:v00001002d00004399sv00001002sd00004396bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 10: PCI 13.0: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: HSco.iq6zROgYJY6 SysFS ID: /devices/pci0000:00/0000:00:13.0 SysFS BusID: 0000:00:13.0 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4397 "SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4398 Driver: "ohci-pci" Memory Range: 0xf9ffc000-0xf9ffcfff (rw,non-prefetchable) IRQ: 18 (49455 events) Module Alias: "pci:v00001002d00004397sv00001002sd00004398bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 14.3: 0601 ISA bridge [Created at pci.386] Unique ID: yX7n.b0RPThE+ouA SysFS ID: /devices/pci0000:00/0000:00:14.3 SysFS BusID: 0000:00:14.3 Hardware Class: bridge Model: "ATI SB7x0/SB8x0/SB9x0 LPC host controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x439d "SB7x0/SB8x0/SB9x0 LPC host controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4383 Module Alias: "pci:v00001002d0000439Dsv00001002sd00004383bc06sc01i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: VCu0.QrK1+wp+3C7 Parent ID: _Znp.ipvg_9gbSUD SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "nVidia GeForce 8600 GT" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0402 "GeForce 8600 GT" Revision: 0xa1 Driver: "nouveau" Driver Modules: "nouveau" Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable) Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) Memory Range: 0xfa000000-0xfbffffff (rw,non-prefetchable) I/O Ports: 0xc800-0xc87f (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 26 (183996 events) Module Alias: "pci:v000010DEd00000402sv00000000sd00000000bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: nv Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (PCI bridge) 13: PCI 14.1: 0101 IDE interface (ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering) [Created at pci.386] Unique ID: Eu86.F2DAHHbcLr7 SysFS ID: /devices/pci0000:00/0000:00:14.1 SysFS BusID: 0000:00:14.1 Hardware Class: storage Model: "ATI SB7x0/SB8x0/SB9x0 IDE Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x439c "SB7x0/SB8x0/SB9x0 IDE Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82f1 Driver: "pata_atiixp" Driver Modules: "pata_atiixp" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0xff00-0xff0f (rw) IRQ: 16 (1725 events) Module Alias: "pci:v00001002d0000439Csv00001043sd000082F1bc01sc01i8A" Driver Info #0: Driver Status: pata_atiixp is active Driver Activation Cmd: "modprobe pata_atiixp" Driver Info #1: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 12.2: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: x_X+.woNt+Y5bX7A SysFS ID: /devices/pci0000:00/0000:00:12.2 SysFS BusID: 0000:00:12.2 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4396 "SB7x0/SB8x0/SB9x0 USB EHCI Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4397 Driver: "ehci-pci" Memory Range: 0xf9fff000-0xf9fff0ff (rw,non-prefetchable) IRQ: 17 (159909 events) Module Alias: "pci:v00001002d00004396sv00001002sd00004397bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.5kJbVLIG3sF SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "AMD RS780 Host Bridge" Vendor: pci 0x1022 "AMD" Device: pci 0x9600 "RS780 Host Bridge" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x7910 Module Alias: "pci:v00001022d00009600sv00001002sd00007910bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 12.0: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: CLZK.BDXXLZhMRx2 SysFS ID: /devices/pci0000:00/0000:00:12.0 SysFS BusID: 0000:00:12.0 Hardware Class: usb controller Model: "ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4397 "SB7x0/SB8x0/SB9x0 USB OHCI0 Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4397 Driver: "ohci-pci" Memory Range: 0xf9ffe000-0xf9ffefff (rw,non-prefetchable) IRQ: 16 (1725 events) Module Alias: "pci:v00001002d00004397sv00001002sd00004397bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 18.2: 0600 Host bridge [Created at pci.386] Unique ID: OMCs.ridUeImaQn3 SysFS ID: /devices/pci0000:00/0000:00:18.2 SysFS BusID: 0000:00:18.2 Hardware Class: bridge Model: "AMD K8 [Athlon64/Opteron] DRAM Controller" Vendor: pci 0x1022 "AMD" Device: pci 0x1102 "K8 [Athlon64/Opteron] DRAM Controller" Module Alias: "pci:v00001022d00001102sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 06.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: H0_h.F3lwQt0j1eE SysFS ID: /devices/pci0000:00/0000:00:06.0 SysFS BusID: 0000:00:06.0 Hardware Class: bridge Model: "AMD RS780 PCI to PCI bridge (PCIE port 2)" Vendor: pci 0x1022 "AMD" Device: pci 0x9606 "RS780 PCI to PCI bridge (PCIE port 2)" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x7910 Driver: "pcieport" IRQ: 18 (49455 events) Module Alias: "pci:v00001022d00009606sv00001002sd00007910bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 13.1: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: 9n5e.kse81omRjXA SysFS ID: /devices/pci0000:00/0000:00:13.1 SysFS BusID: 0000:00:13.1 Hardware Class: usb controller Model: "ATI SB7x0 USB OHCI1 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4398 "SB7x0 USB OHCI1 Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4399 Driver: "ohci-pci" Memory Range: 0xf9ffb000-0xf9ffbfff (rw,non-prefetchable) IRQ: 18 (49455 events) Module Alias: "pci:v00001002d00004398sv00001002sd00004399bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 18.0: 0600 Host bridge [Created at pci.386] Unique ID: fiDB.ptk_g9XAN03 SysFS ID: /devices/pci0000:00/0000:00:18.0 SysFS BusID: 0000:00:18.0 Hardware Class: bridge Model: "AMD K8 [Athlon64/Opteron] HyperTransport Technology Configuration" Vendor: pci 0x1022 "AMD" Device: pci 0x1100 "K8 [Athlon64/Opteron] HyperTransport Technology Configuration" Module Alias: "pci:v00001022d00001100sv00000000sd00000000bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 14.4: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: qscc.ULOo3yhA66C SysFS ID: /devices/pci0000:00/0000:00:14.4 SysFS BusID: 0000:00:14.4 Hardware Class: bridge Model: "ATI SBx00 PCI to PCI Bridge" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4384 "SBx00 PCI to PCI Bridge" Module Alias: "pci:v00001002d00004384sv00000000sd00000000bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 14.2: 0403 Audio device [Created at pci.386] Unique ID: 5Dex._goovBCg2_2 SysFS ID: /devices/pci0000:00/0000:00:14.2 SysFS BusID: 0000:00:14.2 Hardware Class: sound Model: "ATI SBx00 Azalia (Intel HDA)" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4383 "SBx00 Azalia (Intel HDA)" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82fe Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xf9ff4000-0xf9ff7fff (rw,non-prefetchable) IRQ: 16 (1725 events) Module Alias: "pci:v00001002d00004383sv00001043sd000082FEbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 11.0: 0106 SATA controller (AHCI 1.0) [Created at pci.386] Unique ID: 7EWs.VPSurMhmkf1 SysFS ID: /devices/pci0000:00/0000:00:11.0 SysFS BusID: 0000:00:11.0 Hardware Class: storage Model: "ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4390 "SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82f1 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xb000-0xb007 (rw) I/O Ports: 0xa000-0xa003 (rw) I/O Ports: 0x9000-0x9007 (rw) I/O Ports: 0x8000-0x8003 (rw) I/O Ports: 0x7000-0x700f (rw) Memory Range: 0xf9fff800-0xf9fffbff (rw,non-prefetchable) IRQ: 24 (no events) Module Alias: "pci:v00001002d00004390sv00001043sd000082F1bc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 02.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: _Znp.ipvg_9gbSUD SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: bridge Model: "AMD RS780 PCI to PCI bridge (ext gfx port 0)" Vendor: pci 0x1022 "AMD" Device: pci 0x9603 "RS780 PCI to PCI bridge (ext gfx port 0)" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x7910 Driver: "pcieport" IRQ: 18 (49455 events) Module Alias: "pci:v00001022d00009603sv00001002sd00007910bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 307.0: 0200 Ethernet controller [Created at pci.386] Unique ID: Phdb.bM7cYpCLfi8 Parent ID: qscc.ULOo3yhA66C SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:03:07.0 SysFS BusID: 0000:03:07.0 Hardware Class: network Model: "Compex FN22-3(A) LinxPRO Ethernet Adapter" Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd." Device: pci 0x8139 "RTL-8100/8101L/8139 PCI Fast Ethernet Adapter" SubVendor: pci 0x11f6 "Compex" SubDevice: pci 0x8139 "FN22-3(A) LinxPRO Ethernet Adapter" Revision: 0x10 I/O Ports: 0xe800-0xe8ff (rw) Memory Range: 0xfebffc00-0xfebffcff (rw,non-prefetchable) Memory Range: 0xfebe0000-0xfebeffff (ro,non-prefetchable,disabled) IRQ: 22 (no events) Module Alias: "pci:v000010ECd00008139sv000011F6sd00008139bc02sc00i00" Driver Info #0: Driver Status: 8139too is active Driver Activation Cmd: "modprobe 8139too" Driver Info #1: Driver Status: 8139cp is active Driver Activation Cmd: "modprobe 8139cp" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (PCI bridge) 26: PCI 14.0: 0c05 SMBus [Created at pci.386] Unique ID: MZfG.NNyI+H2c0_F SysFS ID: /devices/pci0000:00/0000:00:14.0 SysFS BusID: 0000:00:14.0 Hardware Class: unknown Model: "ATI SBx00 SMBus Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4385 "SBx00 SMBus Controller" SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x82f1 Revision: 0x3a Module Alias: "pci:v00001002d00004385sv00001043sd000082F1bc0Csc05i00" Driver Info #0: Driver Status: i2c_piix4 is active Driver Activation Cmd: "modprobe i2c_piix4" Driver Info #1: Driver Status: sp5100_tco is not active Driver Activation Cmd: "modprobe sp5100_tco" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: PCI 12.1: 0c03 USB Controller (OHCI) [Created at pci.386] Unique ID: 4g2A.DF3jwynFrw6 SysFS ID: /devices/pci0000:00/0000:00:12.1 SysFS BusID: 0000:00:12.1 Hardware Class: usb controller Model: "ATI SB7x0 USB OHCI1 Controller" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x4398 "SB7x0 USB OHCI1 Controller" SubVendor: pci 0x1002 "ATI Technologies Inc" SubDevice: pci 0x4398 Driver: "ohci-pci" Memory Range: 0xf9ffd000-0xf9ffdfff (rw,non-prefetchable) IRQ: 16 (1725 events) Module Alias: "pci:v00001002d00004398sv00001002sd00004398bc0Csc03i10" Driver Info #0: Driver Status: ohci-hcd is not active Driver Activation Cmd: "modprobe ohci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 28: None 00.0: 10000 Monitor [Created at monitor.125] Unique ID: rdCR.kPSnsPiZ2tA Parent ID: VCu0.QrK1+wp+3C7 Hardware Class: monitor Model: "SAMSUNG SyncMaster" Vendor: SAM "SAMSUNG" Device: eisa 0x0017 "SyncMaster" Serial ID: -- Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@72Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@72Hz Resolution: 800x600@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@70Hz Resolution: 1024x768@75Hz Resolution: 640x480@75Hz Resolution: 800x600@75Hz Resolution: 1024x768@75Hz Resolution: 640x480@60Hz Size: 304x228 mm Year of Manufacture: 2003 Week of Manufacture: 4 Detailed Timings #0: Resolution: 1024x768 Horizontal: 1024 1048 1184 1344 (+24 +160 +320) -hsync Vertical: 768 771 777 806 (+3 +9 +38) -vsync Frequencies: 65.00 MHz, 48.36 kHz, 60.00 Hz Driver Info #0: Max. Resolution: 1024x768 Vert. Sync Range: 56-75 Hz Hor. Sync Range: 30-60 kHz Bandwidth: 65 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #12 (VGA compatible controller) 29: SCSI 600.0: 10600 Disk [Created at block.256] Unique ID: wn1q.GWJ68g8SjZ0 Parent ID: HSco.iq6zROgYJY6 SysFS ID: /class/block/sdb SysFS BusID: 6:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/host6/target6:0:0/6:0:0:0 Hardware Class: disk Model: "BR17 DEVICE V1.00" Vendor: usb 0xe5b7 "BR17" Device: usb 0x0811 "DEVICE V1.00" Revision: "1.00" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage" Device File: /dev/sdb (/dev/sg2) Device Files: /dev/sdb, /dev/disk/by-id/usb-BR17_DEVICE_V1.00_...-0:0, /dev/disk/by-path/pci-0000:00:13.0-usb-0:2:1.0-scsi-0:0:0:0 Device Number: block 8:16-8:31 (char 21:2) Speed: 12 Mbps Module Alias: "usb:vE5B7p0811d0100dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (USB Controller) 30: SCSI 400.0: 10600 Disk [Created at block.245] Unique ID: KD9E.1xDz+Am5wzA Parent ID: Eu86.F2DAHHbcLr7 SysFS ID: /class/block/sr0 SysFS BusID: 4:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:14.1/ata5/host4/target4:0:0/4:0:0:0 Hardware Class: disk Model: "HL-DT-ST DVDRAM GSA-H10N" Vendor: "HL-DT-ST" Device: "DVDRAM GSA-H10N" Revision: "JL12" Driver: "pata_atiixp", "sr" Driver Modules: "pata_atiixp" Device File: /dev/sr0 (/dev/sg0) Device Files: /dev/sr0, /dev/cdrom, /dev/cdrw, /dev/disk/by-id/ata-HL-DT-ST_DVDRAM_GSA-H10N_..., /dev/disk/by-path/pci-0000:00:14.1-ata-1, /dev/dvd, /dev/dvdrw Device Number: block 11:0 (char 21:0) Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (IDE interface) 31: None 00.0: 10600 Disk [Created at block.245] Unique ID: kwWm.Fxp0d3BezAE SysFS ID: /class/block/fd0 SysFS BusID: floppy.0 SysFS Device Link: /devices/platform/floppy.0 Hardware Class: disk Model: "Disk" Driver: "floppy" Driver Modules: "floppy" Device File: /dev/fd0 Device Number: block 2:0 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown 32: SCSI 700.0: 10600 Disk [Created at block.245] Unique ID: FKGF.b_3GWBVDK92 Parent ID: 06bT.PBoRvnalNQA SysFS ID: /class/block/sdc SysFS BusID: 7:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/host7/target7:0:0/7:0:0:0 Hardware Class: disk Model: "WD My Passport 0730" Vendor: usb 0x1058 "WD" Device: usb 0x0730 "My Passport 0730" Revision: "1008" Serial ID: -- Driver: "usb-storage", "sd" Driver Modules: "usb_storage" Device File: /dev/sdc (/dev/sg3) Device Files: /dev/sdc, /dev/disk/by-id/usb-WD_My_Passport_0730_...-0:0, /dev/disk/by-path/pci-0000:00:13.2-usb-0:1:1.0-scsi-0:0:0:0 Device Number: block 8:32-8:47 (char 21:3) Speed: 480 Mbps Module Alias: "usb:v1058p0730d1008dc00dsc00dp00ic08isc06ip50in00" Driver Info #0: Driver Status: uas is active Driver Activation Cmd: "modprobe uas" Driver Info #1: Driver Status: usb_storage is active Driver Activation Cmd: "modprobe usb_storage" Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (USB Controller) 33: IDE 500.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.aag5m_BKA55 Parent ID: Eu86.F2DAHHbcLr7 SysFS ID: /class/block/sda SysFS BusID: 5:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:14.1/ata6/host5/target5:0:0/5:0:0:0 Hardware Class: disk Model: "WDC WD2500YS-01S" Vendor: "WDC" Device: "WD2500YS-01S" Revision: "6C06" Driver: "pata_atiixp", "sd" Driver Modules: "pata_atiixp" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/ata-WDC_WD2500YS-01SHB1_...-WCANY3726612, /dev/disk/by-id/wwn-0x... /dev/disk/by-path/pci-0000:00:14.1-ata-2 Device Number: block 8:0-8:15 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #13 (IDE interface) 34: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.PaupGMfzSp8 Parent ID: 9n5e.kse81omRjXA SysFS ID: /devices/pci0000:00/0000:00:13.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (USB Controller) 35: USB 00.4: 0000 Unclassified device [Created at usb.122] Unique ID: kV25.v8PA8nNVFi8 Parent ID: 2XnU.erpEvbsFWX1 SysFS ID: /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.4 SysFS BusID: 5-2:1.4 Hardware Class: unknown Model: "ZhuHai JieLi CD04" Hotplug: USB Vendor: usb 0xe5b7 "ZhuHai JieLi Technology" Device: usb 0x0811 "CD04" Revision: "1.00" Serial ID: -- Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event2 Device Files: /dev/input/event2, /dev/input/by-id/usb-ZhuHai_JieLi_Technology_CD04_...-event-if04, /dev/input/by-path/pci-0000:00:13.0-usb-0:2:1.4-event Device Number: char 13:66 Speed: 12 Mbps Module Alias: "usb:vE5B7p0811d0100dc00dsc00dp00ic03isc00ip00in04" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #47 (Hub) 36: USB 00.1: 0000 Unclassified device [Created at usb.122] Unique ID: DlBy.n07LmnWq549 Parent ID: uIhY.7qWCOCfUJwE SysFS ID: /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.1 SysFS BusID: 3-2:1.1 Hardware Class: unknown Model: "Novatek Microelectronics Keyboard (Labtec Ultra Flat Keyboard)" Hotplug: USB Vendor: usb 0x0603 "Novatek Microelectronics Corp." Device: usb 0x00f2 "Keyboard (Labtec Ultra Flat Keyboard)" Revision: "1.12" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event4 Device Files: /dev/input/event4, /dev/input/by-id/usb-NOVATEK_USB_...-if01-event-mouse, /dev/input/by-path/pci-0000:00:12.0-usb-0:2:1.1-event-mouse Device Number: char 13:68 Speed: 1.5 Mbps Module Alias: "usb:v0603p00F2d0112dc00dsc00dp00ic03isc00ip00in01" Driver Info #0: Driver Status: usbhid is active Driver Activation Cmd: "modprobe usbhid" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #39 (Hub) 37: USB 00.2: 0401 Multimedia audio controller [Created at usb.122] Unique ID: q8Yy.sN_6YEDGDe8 Parent ID: 2XnU.erpEvbsFWX1 SysFS ID: /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.2 SysFS BusID: 5-2:1.2 Hardware Class: sound Model: "ZhuHai JieLi CD04" Hotplug: USB Vendor: usb 0xe5b7 "ZhuHai JieLi Technology" Device: usb 0x0811 "CD04" Revision: "1.00" Serial ID: -- Driver: "snd-usb-audio" Driver Modules: "snd_usb_audio" Speed: 12 Mbps Module Alias: "usb:vE5B7p0811d0100dc00dsc00dp00ic01isc02ip00in02" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #47 (Hub) 39: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.7qWCOCfUJwE Parent ID: CLZK.BDXXLZhMRx2 SysFS ID: /devices/pci0000:00/0000:00:12.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (USB Controller) 41: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT._WUAGn1cSY8 Parent ID: hB6S.iQqbCxPxK+3 SysFS ID: /devices/pci0000:00/0000:00:14.5/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #9 (USB Controller) 42: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.uYbnlyRCGC6 Parent ID: 4g2A.DF3jwynFrw6 SysFS ID: /devices/pci0000:00/0000:00:12.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #27 (USB Controller) 44: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.YdoZZg0c8i6 Parent ID: x_X+.woNt+Y5bX7A SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (USB Controller) 45: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: mZxt.2w1BPFjEB1F Parent ID: uIhY.7qWCOCfUJwE SysFS ID: /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0 SysFS BusID: 3-2:1.0 Hardware Class: keyboard Model: "Novatek Microelectronics Keyboard (Labtec Ultra Flat Keyboard)" Hotplug: USB Vendor: usb 0x0603 "Novatek Microelectronics Corp." Device: usb 0x00f2 "Keyboard (Labtec Ultra Flat Keyboard)" Revision: "1.12" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event3 Device Files: /dev/input/event3, /dev/input/by-id/usb-NOVATEK_USB_...-event-kbd, /dev/input/by-path/pci-0000:00:12.0-usb-0:2:1.0-event-kbd Device Number: char 13:67 Speed: 1.5 Mbps Module Alias: "usb:v0603p00F2d0112dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #39 (Hub) 47: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.erpEvbsFWX1 Parent ID: HSco.iq6zROgYJY6 SysFS ID: /devices/pci0000:00/0000:00:13.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #10 (USB Controller) 48: USB 00.0: 0282 WLAN controller [Created at usb.122] Unique ID: ADDn.i+8+cNT5FUE Parent ID: k4bc.YdoZZg0c8i6 SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0 SysFS BusID: 1-1:1.0 Hardware Class: network Model: "Ralink RT2870/RT3070 Wireless Adapter" Hotplug: USB Vendor: usb 0x148f "Ralink Technology, Corp." Device: usb 0x3070 "RT2870/RT3070 Wireless Adapter" Revision: "1.01" Serial ID: -- Driver: "rt2800usb" Driver Modules: "rt2800usb" Device File: wlx784476a40318 Features: WLAN Speed: 480 Mbps HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: yes WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "usb:v148Fp3070d0101dc00dsc00dp00icFFiscFFipFFin00" Driver Info #0: Driver Status: rt2800usb is active Driver Activation Cmd: "modprobe rt2800usb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #44 (Hub) 49: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.3f5c44ENLJ9 Parent ID: 06bT.PBoRvnalNQA SysFS ID: /devices/pci0000:00/0000:00:13.2/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "4.15" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0415dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (USB Controller) 50: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 15.75.2 "AMD Athlon(tm) 64 X2 Dual Core Processor 4200+" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,rdtscp,lm,3dnowext,3dnow,rep_good,nopl,cpuid,extd_apicid,pni,cx16,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,3dnowprefetch,vmmcall Clock: 2205 MHz BogoMips: 4411.68 Cache: 512 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 51: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 15.75.2 "AMD Athlon(tm) 64 X2 Dual Core Processor 4200+" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,rdtscp,lm,3dnowext,3dnow,rep_good,nopl,cpuid,extd_apicid,pni,cx16,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy,3dnowprefetch,vmmcall Clock: 2205 MHz BogoMips: 4411.43 Cache: 512 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 52: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 53: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: Ij4C.ndpeucax6V1 Parent ID: c3qJ.0IlF0nGz564 SysFS ID: /class/net/enp2s0 SysFS Device Link: /devices/pci0000:00/0000:00:06.0/0000:02:00.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "r8169" Driver Modules: "r8169" Device File: enp2s0 HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #8 (Ethernet controller) 54: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: I7FE.ndpeucax6V1 Parent ID: ADDn.i+8+cNT5FUE SysFS ID: /class/net/wlx784476a40318 SysFS Device Link: /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "rt2800usb" Driver Modules: "rt2800usb" Device File: wlx784476a40318 HW Address: XX:XX:XX:XX:XX:XX Permanent HW Address: XX:XX:XX:XX:XX:XX Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #48 (WLAN controller)