05: PCI 300.0: 0282 WLAN controller [Created at pci.386] Unique ID: y9sn.zzwr_4gQLUF Parent ID: 6NW+.qO2MJbR0aOF SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: network Model: "Linksys WMP54GS v1.1 802.11g Wireless-G PCI Adapter with SpeedBooster" Vendor: pci 0x14e4 "Broadcom" Device: pci 0x4318 "BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller" SubVendor: pci 0x1737 "Linksys" SubDevice: pci 0x0042 "WMP54GS v1.1 802.11g Wireless-G PCI Adapter with SpeedBooster" Revision: 0x02 Driver: "b43-pci-bridge" Driver Modules: "ssb" Device File: wlan0 Features: WLAN Memory Range: 0xfe6fe000-0xfe6fffff (rw,non-prefetchable) IRQ: 16 (15821 events) HW Address: F4E134B1CAFB9A164CE52FFCBED6DE3F Permanent HW Address: F4E134B1CAFB9A164CE52FFCBED6DE3F Link detected: no WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v000014E4d00004318sv00001737sd00000042bc02sc80i00" Driver Info #0: Driver Status: ssb is active Driver Activation Cmd: "modprobe ssb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge) 06: PCI 1f.2: 0106 SATA controller (AHCI 1.0) [Created at pci.386] Unique ID: w7Y8.2xiR4ZwRhd1 SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode]" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2922 "82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 Revision: 0x02 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0xfe00-0xfe07 (rw) I/O Ports: 0xfe10-0xfe13 (rw) I/O Ports: 0xfe20-0xfe27 (rw) I/O Ports: 0xfe30-0xfe33 (rw) I/O Ports: 0xfec0-0xfedf (rw) Memory Range: 0x80200000-0x802007ff (rw,non-prefetchable) IRQ: 27 (61153 events) Module Alias: "pci:v00008086d00002922sv00001028sd00000211bc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown 07: PCI 1c.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: z8Q3.YAZVHxsLYW6 SysFS ID: /devices/pci0000:00/0000:00:1c.0 SysFS BusID: 0000:00:1c.0 Hardware Class: bridge Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2940 "82801I (ICH9 Family) PCI Express Port 1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "pcieport" IRQ: 25 (no events) Module Alias: "pci:v00008086d00002940sv00001028sd00000211bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 08: PCI 1a.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: gFpy.+YuHmkn8HV5 SysFS ID: /devices/pci0000:00/0000:00:1a.1 SysFS BusID: 0000:00:1a.1 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2938 "82801I (ICH9 Family) USB UHCI Controller #5" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff00-0xff1f (rw) IRQ: 17 (363 events) Module Alias: "pci:v00008086d00002938sv00001028sd00000211bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 09: PCI 1f.0: 0601 ISA bridge [Created at pci.386] Unique ID: BUZT.MrS3qDdB2QB SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801IO (ICH9DO) LPC Interface Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2914 "82801IO (ICH9DO) LPC Interface Controller" Revision: 0x02 Driver: "lpc_ich" Driver Modules: "lpc_ich" Module Alias: "pci:v00008086d00002914sv00000000sd00000000bc06sc01i00" Driver Info #0: Driver Status: lpc_ich is active Driver Activation Cmd: "modprobe lpc_ich" Config Status: cfg=new, avail=yes, need=no, active=unknown 10: PCI 01.0: 0604 PCI bridge (Normal decode) [Created at pci.386] Unique ID: vSkL.p_D9a9Gh3ZD SysFS ID: /devices/pci0000:00/0000:00:01.0 SysFS BusID: 0000:00:01.0 Hardware Class: bridge Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29b1 "82Q35 Express PCI Express Root Port" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Driver: "pcieport" IRQ: 24 (no events) Module Alias: "pci:v00008086d000029B1sv00001028sd00000211bc06sc04i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 11: PCI 1d.1: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: vayM.SJ32K55phm5 SysFS ID: /devices/pci0000:00/0000:00:1d.1 SysFS BusID: 0000:00:1d.1 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2935 "82801I (ICH9 Family) USB UHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff60-0xff7f (rw) IRQ: 17 (363 events) Module Alias: "pci:v00008086d00002935sv00001028sd00000211bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 12: PCI 02.1: 0380 Display controller [Created at pci.386] Unique ID: ruGf.kY6yMez4kU2 SysFS ID: /devices/pci0000:00/0000:00:02.1 SysFS BusID: 0000:00:02.1 Hardware Class: graphics card Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29b3 "82Q35 Express Integrated Graphics Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Memory Range: 0xfea80000-0xfeafffff (rw,non-prefetchable) Module Alias: "pci:v00008086d000029B3sv00001028sd00000211bc03sc80i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 13: PCI 1b.0: 0403 Audio device [Created at pci.386] Unique ID: u1Nb.z97TXzKOvE6 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x293e "82801I (ICH9 Family) HD Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0xfe9dc000-0xfe9dffff (rw,non-prefetchable) IRQ: 29 (930 events) Module Alias: "pci:v00008086d0000293Esv00001028sd00000211bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: PCI 19.0: 0200 Ethernet controller [Created at pci.386] Unique ID: ID95.sY8Bmu4PSKD SysFS ID: /devices/pci0000:00/0000:00:19.0 SysFS BusID: 0000:00:19.0 Hardware Class: network Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x10bd "82566DM-2 Gigabit Network Connection" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Driver: "e1000e" Driver Modules: "e1000e" Device File: enp0s25 Memory Range: 0xfe9e0000-0xfe9fffff (rw,non-prefetchable) Memory Range: 0xfe9db000-0xfe9dbfff (rw,non-prefetchable) I/O Ports: 0xecc0-0xecdf (rw) IRQ: 26 (4705 events) HW Address: 28976C0C6465E96D39A0D50D87F26D9F Permanent HW Address: 28976C0C6465E96D39A0D50D87F26D9F Link detected: yes Module Alias: "pci:v00008086d000010BDsv00001028sd00000211bc02sc00i00" Driver Info #0: Driver Status: e1000e is active Driver Activation Cmd: "modprobe e1000e" Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 1e.0: 0604 PCI bridge (Subtractive decode) [Created at pci.386] Unique ID: 6NW+.qO2MJbR0aOF SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244e "82801 PCI Bridge" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x92 Module Alias: "pci:v00008086d0000244Esv00001028sd00000211bc06sc04i01" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 03.2: 0101 IDE interface (PCI native mode-only controller, supports bus mastering) [Created at pci.386] Unique ID: nKpy.rz1mYRtqC44 SysFS ID: /devices/pci0000:00/0000:00:03.2 SysFS BusID: 0000:00:03.2 Hardware Class: storage Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29b6 "82Q35 Express PT IDER Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Driver: "ata_generic" Driver Modules: "ata_generic" I/O Ports: 0xfe80-0xfe87 (rw) I/O Ports: 0xfe90-0xfe93 (rw) I/O Ports: 0xfea0-0xfea7 (rw) I/O Ports: 0xfeb0-0xfeb3 (rw) I/O Ports: 0xfef0-0xfeff (rw) IRQ: 18 (6 events) Module Alias: "pci:v00008086d000029B6sv00001028sd00000211bc01sc01i85" Driver Info #0: Driver Status: pata_acpi is active Driver Activation Cmd: "modprobe pata_acpi" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 1f.3: 0c05 SMBus [Created at pci.386] Unique ID: nS1_.vfDjRoVOT52 SysFS ID: /devices/pci0000:00/0000:00:1f.3 SysFS BusID: 0000:00:1f.3 Hardware Class: unknown Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2930 "82801I (ICH9 Family) SMBus Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "i801_smbus" Driver Modules: "i2c_i801" Memory Range: 0xfe9d9b00-0xfe9d9bff (rw,non-prefetchable) I/O Ports: 0xece0-0xecff (rw) IRQ: 18 (6 events) Module Alias: "pci:v00008086d00002930sv00001028sd00000211bc0Csc05i00" Driver Info #0: Driver Status: i2c_i801 is active Driver Activation Cmd: "modprobe i2c_i801" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 00.0: 0600 Host bridge [Created at pci.386] Unique ID: qLht.EkWZ2U7mjh0 SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29b0 "82Q35 Express DRAM Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Module Alias: "pci:v00008086d000029B0sv00001028sd00000211bc06sc00i00" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 03.0: 0780 Communication controller [Created at pci.386] Unique ID: 3hqH.JvGMvIgn0f3 SysFS ID: /devices/pci0000:00/0000:00:03.0 SysFS BusID: 0000:00:03.0 Hardware Class: unknown Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29b4 "82Q35 Express MEI Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Driver: "mei_me" Driver Modules: "mei_me" Memory Range: 0x80200800-0x8020080f (rw,non-prefetchable) IRQ: 28 (14 events) Module Alias: "pci:v00008086d000029B4sv00001028sd00000211bc07sc80i00" Driver Info #0: Driver Status: mei_me is active Driver Activation Cmd: "modprobe mei_me" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1d.2: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: mvRC.zj+nofCWD96 SysFS ID: /devices/pci0000:00/0000:00:1d.2 SysFS BusID: 0000:00:1d.2 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2936 "82801I (ICH9 Family) USB UHCI Controller #3" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff40-0xff5f (rw) IRQ: 18 (6 events) Module Alias: "pci:v00008086d00002936sv00001028sd00000211bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 1a.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: pwJ7.U8yXHAgRl65 SysFS ID: /devices/pci0000:00/0000:00:1a.0 SysFS BusID: 0000:00:1a.0 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2937 "82801I (ICH9 Family) USB UHCI Controller #4" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff20-0xff3f (rw) IRQ: 16 (15821 events) Module Alias: "pci:v00008086d00002937sv00001028sd00000211bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 22: PCI 1d.0: 0c03 USB Controller (UHCI) [Created at pci.386] Unique ID: 1GTX.xu6IrWz5AO5 SysFS ID: /devices/pci0000:00/0000:00:1d.0 SysFS BusID: 0000:00:1d.0 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2934 "82801I (ICH9 Family) USB UHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0xff80-0xff9f (rw) IRQ: 23 (2 events) Module Alias: "pci:v00008086d00002934sv00001028sd00000211bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is not active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 23: PCI 1a.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: sClz.ZDGTz4ljvsB SysFS ID: /devices/pci0000:00/0000:00:1a.7 SysFS BusID: 0000:00:1a.7 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x293c "82801I (ICH9 Family) USB2 EHCI Controller #2" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xfe9d9c00-0xfe9d9fff (rw,non-prefetchable) IRQ: 22 (4 events) Module Alias: "pci:v00008086d0000293Csv00001028sd00000211bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 24: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.386] Unique ID: _Znp.D6lJTogQStC SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29b2 "Q35" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Driver: "i915" Driver Modules: "i915" Memory Range: 0xfea00000-0xfea7ffff (rw,non-prefetchable) I/O Ports: 0xec90-0xec97 (rw) Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) Memory Range: 0xfeb00000-0xfebfffff (rw,non-prefetchable) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 16 (15821 events) Module Alias: "pci:v00008086d000029B2sv00001028sd00000211bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: intel Driver Info #1: XFree86 v4 Server Module: intel 3D Support: yes Extensions: dri Config Status: cfg=new, avail=yes, need=no, active=unknown 25: PCI 1d.7: 0c03 USB Controller (EHCI) [Created at pci.386] Unique ID: 5YuN.XONz+xVJs5B SysFS ID: /devices/pci0000:00/0000:00:1d.7 SysFS BusID: 0000:00:1d.7 Hardware Class: usb controller Model: "Dell Optiplex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x293a "82801I (ICH9 Family) USB2 EHCI Controller #1" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "Optiplex 755" Revision: 0x02 Driver: "ehci-pci" Memory Range: 0xff980800-0xff980bff (rw,non-prefetchable) IRQ: 23 (2 events) Module Alias: "pci:v00008086d0000293Asv00001028sd00000211bc0Csc03i20" Driver Info #0: Driver Status: ehci-hcd is not active Driver Activation Cmd: "modprobe ehci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 03.3: 0700 Serial controller (16550) [Created at pci.386] Unique ID: ffIo.uUPsRd0NL_5 SysFS ID: /devices/pci0000:00/0000:00:03.3 SysFS BusID: 0000:00:03.3 Hardware Class: unknown Model: "Dell OptiPlex 755" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x29b7 "82Q35 Express Serial KT Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x0211 "OptiPlex 755" Revision: 0x02 Driver: "serial" I/O Ports: 0xec98-0xec9f (rw) Memory Range: 0xfe9da000-0xfe9dafff (rw,non-prefetchable) IRQ: 17 (363 events) Module Alias: "pci:v00008086d000029B7sv00001028sd00000211bc07sc00i02" Config Status: cfg=new, avail=yes, need=no, active=unknown 27: None 00.0: 10000 Monitor [Created at monitor.125] Unique ID: rdCR.xovgnocq99E Parent ID: _Znp.D6lJTogQStC Hardware Class: monitor Model: "LG ELECTRONICS LG HD" Vendor: GSM "LG ELECTRONICS" Device: eisa 0x5acb "LG HD" Serial ID: -- Resolution: 720x400@70Hz Resolution: 640x480@60Hz Resolution: 640x480@75Hz Resolution: 800x600@56Hz Resolution: 800x600@60Hz Resolution: 800x600@75Hz Resolution: 832x624@75Hz Resolution: 1024x768@60Hz Resolution: 1024x768@75Hz Resolution: 640x480@75Hz Resolution: 800x600@75Hz Resolution: 1024x768@75Hz Resolution: 1280x720@60Hz Resolution: 1366x768@60Hz Size: 410x230 mm Year of Manufacture: 2019 Week of Manufacture: 2 Detailed Timings #0: Resolution: 1366x768 Horizontal: 1366 1436 1579 1792 (+70 +213 +426) +hsync Vertical: 768 771 774 798 (+3 +6 +30) +vsync Frequencies: 85.50 MHz, 47.71 kHz, 59.79 Hz Driver Info #0: Max. Resolution: 1366x768 Vert. Sync Range: 56-75 Hz Hor. Sync Range: 30-61 kHz Bandwidth: 85 MHz Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #24 (VGA compatible controller) 28: IDE 700.0: 10600 Disk [Created at block.245] Unique ID: WZeP.Gz9uV2Qrps0 Parent ID: w7Y8.2xiR4ZwRhd1 SysFS ID: /class/block/sdb SysFS BusID: 7:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata8/host7/target7:0:0/7:0:0:0 Hardware Class: disk Model: "WDC WD1600AABS-5" Vendor: "WDC" Device: "WD1600AABS-5" Revision: "6H05" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sdb Device Number: block 8:16-8:31 BIOS id: 0x80 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (SATA controller) 29: SCSI 200.0: 10600 Disk [Created at block.245] Unique ID: KD9E.DNbFCiPstR7 Parent ID: w7Y8.2xiR4ZwRhd1 SysFS ID: /class/block/sr0 SysFS BusID: 2:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata3/host2/target2:0:0/2:0:0:0 Hardware Class: disk Model: "TSSTcorp DVD+-RW TS-L633A" Vendor: "TSSTcorp" Device: "DVD+-RW TS-L633A" Revision: "D300" Driver: "ahci", "sr" Driver Modules: "ahci" Device File: /dev/sr0 (/dev/sg0) Device Number: block 11:0 (char 21:0) BIOS id: 0x81 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (SATA controller) 30: IDE 300.0: 10600 Disk [Created at block.245] Unique ID: 3OOL.f0q6ILsoIp9 Parent ID: w7Y8.2xiR4ZwRhd1 SysFS ID: /class/block/sda SysFS BusID: 3:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata4/host3/target3:0:0/3:0:0:0 Hardware Class: disk Model: "Hitachi HTS54107" Vendor: "Hitachi" Device: "HTS54107" Revision: "A4D0" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Number: block 8:0-8:15 BIOS id: 0x82 Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #6 (SATA controller) 31: USB 00.0: 11500 Bluetooth Device [Created at usb.122] Unique ID: rg_L.nQKjiuCfL84 Parent ID: zPk0.7gZT0a5zLs5 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0 SysFS BusID: 4-2:1.0 Hardware Class: bluetooth Model: "Cambridge Silicon Radio Bluetooth Dongle (HCI mode)" Hotplug: USB Vendor: usb 0x0a12 "Cambridge Silicon Radio, Ltd" Device: usb 0x0001 "Bluetooth Dongle (HCI mode)" Revision: "88.91" Driver: "btusb" Driver Modules: "btusb" Speed: 12 Mbps Module Alias: "usb:v0A12p0001d8891dcE0dsc01dp01icE0isc01ip01in00" Driver Info #0: Driver Status: btusb is active Driver Activation Cmd: "modprobe btusb" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #40 (Hub) 32: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 7eqy.gkSaZmjGyhD Parent ID: vayM.SJ32K55phm5 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-0:1.0 SysFS BusID: 6-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (USB Controller) 33: USB 00.1: 10503 USB Mouse [Created at usb.122] Unique ID: sjcF.bKaU5viynq0 Parent ID: zPk0.7gZT0a5zLs5 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1 SysFS BusID: 4-1:1.1 Hardware Class: mouse Model: "Areson Elecom Co., Ltd MR-K013 Multicard Reader" Hotplug: USB Vendor: usb 0x25a7 "Areson Technology Corp" Device: usb 0xfa61 "Elecom Co., Ltd MR-K013 Multicard Reader" Revision: "6.17" Compatible to: int 0x0210 0x0045 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse1) Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event7 Device Number: char 13:63 (char 13:33) Speed: 12 Mbps Module Alias: "usb:v25A7pFA61d0617dc00dsc00dp00ic03isc01ip02in01" Driver Info #0: Buttons: 5 Wheels: 4 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #40 (Hub) 34: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 93B0.h12dQh22v98 Parent ID: ZmS7.h12dQh22v98 SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1.1/6-1.1:1.0 SysFS BusID: 6-1.1:1.0 Hardware Class: hub Model: "Unknown Manufacturer hub" Hotplug: USB Vendor: usb 0x0a05 "Unknown Manufacturer" Device: usb 0x7211 "hub" Revision: "1.00" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v0A05p7211d0100dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #36 (Hub) 35: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: uIhY.MxUuepIFPaE Parent ID: pwJ7.U8yXHAgRl65 SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-0:1.0 SysFS BusID: 3-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #21 (USB Controller) 36: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: ZmS7.h12dQh22v98 Parent ID: 7eqy.gkSaZmjGyhD SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0 SysFS BusID: 6-1:1.0 Hardware Class: hub Model: "Unknown Manufacturer hub" Hotplug: USB Vendor: usb 0x0a05 "Unknown Manufacturer" Device: usb 0x7211 "hub" Revision: "1.00" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v0A05p7211d0100dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #32 (Hub) 37: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: BSFT.RTX9xWW_uz4 Parent ID: mvRC.zj+nofCWD96 SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb7/7-0:1.0 SysFS BusID: 7-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #20 (USB Controller) 39: USB 00.0: 10503 USB Mouse [Created at usb.122] Unique ID: KRJj.rMWBfAtsG_0 Parent ID: uIhY.MxUuepIFPaE SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0 SysFS BusID: 3-1:1.0 Hardware Class: mouse Model: "Maxxter Wireless Receiver" Hotplug: USB Vendor: usb 0x248a "Maxxter" Device: usb 0x8514 "Wireless Receiver" Revision: "1.00" Compatible to: int 0x0210 0x0025 Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2 Device Number: char 13:63 (char 13:32) Speed: 12 Mbps Module Alias: "usb:v248Ap8514d0100dc00dsc00dp00ic03isc01ip02in00" Driver Info #0: Buttons: 5 Wheels: 2 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #35 (Hub) 40: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: zPk0.7gZT0a5zLs5 Parent ID: gFpy.+YuHmkn8HV5 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-0:1.0 SysFS BusID: 4-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #8 (USB Controller) 41: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.cO89g+iefn1 Parent ID: sClz.ZDGTz4ljvsB SysFS ID: /devices/pci0000:00/0000:00:1a.7/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #23 (USB Controller) 42: USB 00.0: 10800 Keyboard [Created at usb.122] Unique ID: PYMB.M5x0bvKlyr0 Parent ID: zPk0.7gZT0a5zLs5 SysFS ID: /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0 SysFS BusID: 4-1:1.0 Hardware Class: keyboard Model: "Areson Elecom Co., Ltd MR-K013 Multicard Reader" Hotplug: USB Vendor: usb 0x25a7 "Areson Technology Corp" Device: usb 0xfa61 "Elecom Co., Ltd MR-K013 Multicard Reader" Revision: "6.17" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event6 Device Number: char 13:70 Speed: 12 Mbps Module Alias: "usb:v25A7pFA61d0617dc00dsc00dp00ic03isc01ip01in00" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #40 (Hub) 43: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: 2XnU.v+N+B0xY+P6 Parent ID: 1GTX.xu6IrWz5AO5 SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb5/5-0:1.0 SysFS BusID: 5-0:1.0 Hardware Class: hub Model: "Linux Foundation 1.1 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0001 "1.1 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v1D6Bp0001d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (USB Controller) 44: USB 00.1: 10800 Keyboard [Created at usb.122] Unique ID: ncZn.6e0Y7yQmQu1 Parent ID: uIhY.MxUuepIFPaE SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1 SysFS BusID: 3-1:1.1 Hardware Class: keyboard Model: "Maxxter Wireless Receiver" Hotplug: USB Vendor: usb 0x248a "Maxxter" Device: usb 0x8514 "Wireless Receiver" Revision: "1.00" Driver: "usbhid" Driver Modules: "usbhid" Device File: /dev/input/event5 Device Number: char 13:69 Speed: 12 Mbps Module Alias: "usb:v248Ap8514d0100dc00dsc00dp00ic03isc01ip01in01" Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #35 (Hub) 45: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: pBe4.9T1GDCLyFd9 Parent ID: 5YuN.XONz+xVJs5B SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb2/2-0:1.0 SysFS BusID: 2-0:1.0 Hardware Class: hub Model: "Linux Foundation 2.0 root hub" Hotplug: USB Vendor: usb 0x1d6b "Linux Foundation" Device: usb 0x0002 "2.0 root hub" Revision: "5.11" Serial ID: -- Driver: "hub" Driver Modules: "usbcore" Speed: 480 Mbps Module Alias: "usb:v1D6Bp0002d0511dc09dsc00dp00ic09isc00ip00in00" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #25 (USB Controller) 46: None 00.0: 10103 CPU [Created at cpu.462] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.13 "Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 1800 MHz BogoMips: 3591.27 Cache: 1024 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 47: None 01.0: 10103 CPU [Created at cpu.462] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "GenuineIntel" Model: 6.15.13 "Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ht,tm,pbe,syscall,nx,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,cpuid,aperfmperf,pni,dtes64,monitor,ds_cpl,est,tm2,ssse3,cx16,xtpr,pdcm,lahf_lm,pti,dtherm Clock: 1790 MHz BogoMips: 3591.27 Cache: 1024 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 48: None 00.0: 10780 Network Interface [Created at net.126] Unique ID: tovL.GSopYcFr9cF SysFS ID: /class/net/tun0 Hardware Class: network interface Model: "Network Interface" Driver: "tun" Device File: tun0 Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 49: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: Vbky.ndpeucax6V1 SysFS ID: /class/net/lxcbr0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "bridge" Device File: lxcbr0 HW Address: 6EF9CCBCAA162DCDA28E0015BE2AA9F1 Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown 50: None 00.0: 10701 Ethernet [Created at net.126] Unique ID: 4Iz5.ndpeucax6V1 Parent ID: ID95.sY8Bmu4PSKD SysFS ID: /class/net/enp0s25 SysFS Device Link: /devices/pci0000:00/0000:00:19.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "e1000e" Driver Modules: "e1000e" Device File: enp0s25 HW Address: 28976C0C6465E96D39A0D50D87F26D9F Permanent HW Address: 28976C0C6465E96D39A0D50D87F26D9F Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #14 (Ethernet controller) 51: None 00.0: 1070a WLAN [Created at net.126] Unique ID: AYEt.QXn1l67RSa1 Parent ID: y9sn.zzwr_4gQLUF SysFS ID: /class/net/wlan0 SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:03:00.0/ssb0:0 Hardware Class: network interface Model: "WLAN network interface" Driver: "b43" Driver Modules: "b43", "b43" Device File: wlan0 HW Address: F4E134B1CAFB9A164CE52FFCBED6DE3F Permanent HW Address: F4E134B1CAFB9A164CE52FFCBED6DE3F Link detected: no Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #5 (WLAN controller) 52: None 00.0: 10700 Loopback [Created at net.126] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown